Search NASA⌕ Search

SEARCH · Search NASA

Results for “INDUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Low two-level-system noise in hydrogenated amorphous silicon

At sub-Kelvin temperatures, two-level systems (TLSs) present in amorphous dielectrics source a permittivity noise, degrading the performance of a wide range of devices using superconductive resonators such as qubits or kinetic inductance detectors. We report here on measurements of TLS noise in hydrogenated amorphous silicon (a-Si:H) films deposited by plasma-enhanced chemical vapor deposition in superconductive lumped element resonators using parallel-plate capacitors. In conclusion, the TLS noise results presented in this article for two recipes of a-Si:H improve on the best results achieved in the literature by a factor >5 for a-Si:H and other amorphous dielectrics and are comparable to those observed for resonators deposited on crystalline dielectrics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Nanoscale control of LaAlO 3 /SrTiO 3 conductance beyond the polar catastrophe

Conductive atomic force microscope (c-AFM) lithography can be utilized to create a wide range of LaAlO 3 /SrTiO 3 (LAO/STO)-based nanoelectronic devices in a reconfigurable manner. Experiments were generally performed with intrinsically insulating LAO/STO heterostructures, with LAO thickness less than the critical value at which a polar catastrophe takes place [<4 unit cell (u.c.)]. Here, we use inductively coupled plasma reactive ion etching (ICPRIE) to fabricate c-AFM “canvases” on intrinsically conducting LAO/STO samples with ≥4 u.c. LAO. We observe that its interfacial two-dimensional electron gas (2DEG) can be pinched off and then switched back on by c-AFM lithography. Nanowires created with initially conductive LAO/STO interfaces have an order-of-magnitude longer lifetime in ambient conditions, when compared to an identically created 3.4 u.c. LAO/STO nanowire. We also demonstrate key nanoscale properties such as ballistic transport in a quasi-one-dimensional electron waveguide at a 5 u.c. LAO/STO interface. This approach frees c-AFM-written nanodevice designs from time constraints in air associated with <4 u.c. LAO/STO heterostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Tradeoffs in single stage drift step recovery diode generator design

A high-voltage generator of nanosecond pulses utilizing a drift step recovery diode (DSRD) as an opening switch in the compression section is designed to operate at peak voltages of 4 kV and repetition rates of 2 MHz in burst mode at reduced voltages. The generator is used to perform empirical studies on the output metrics of a DSRD generator with a focus on matching the circuit of the reverse current loop parameters and DSRD to the load. The dynamic impedance introduced by nonlinear elements in the DSRD was investigated with respect to the driving circuit by varying the number of DSRDs connected in series. Experimental results indicate that optimization of the driving circuit for the DSRD is key to minimizing losses and achieving optimal pulse compression. Furthermore, the results also indicate trends in DSRD performance as larger storage inductances and longer pumping times are used, limiting the pulse compression capabilities of a single stage DSRD generator.

Electrical properties and parameters↗
DOE OSTI2024

Heritable gene editing in tomato through viral delivery of isopentenyl transferase and single-guide RNAs to latent axillary meristematic cells

Realizing the full potential of genome editing for crop improvement has been slow due to inefficient methods for reagent delivery and the reliance on tissue culture for creating gene-edited plants. RNA viral vectors offer an alternative approach for delivering gene engineering reagents and bypassing the tissue culture requirement. Viruses, however, are often excluded from the shoot apical meristem, making virus-mediated gene editing inefficient in some species. Here, we developed effective approaches for generating gene-edited shoots in Cas9-expressing transgenic tomato plants using RNA virus-mediated delivery of single-guide RNAs (sgRNAs). RNA viral vectors expressing sgRNAs were either delivered to leaves or sites near axillary meristems. Trimming of the apical and axillary meristems induced new shoots to form from edited somatic cells. To further encourage the induction of shoots, we used RNA viral vectors to deliver sgRNAs along with the cytokinin biosynthesis gene, isopentenyl transferase. Abundant, phenotypically normal, gene-edited shoots were induced per infected plant with single and multiplexed gene edits fixed in the germline. The use of viruses to deliver both gene editing reagents and developmental regulators overcomes the bottleneck in applying virus-induced gene editing to dicotyledonous crops such as tomato and reduces the dependency on tissue culture.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Dramatic changes in mitochondrial subcellular location and morphology accompany activation of the CO 2 concentrating mechanism

Dynamic changes in intracellular ultrastructure can be critical for the ability of organisms to acclimate to environmental conditions. Microalgae, which are responsible for ~50% of global photosynthesis, compartmentalize their Ribulose 1,5 Bisphosphate Carboxylase/Oxygenase (Rubisco) into a specialized structure known as the pyrenoid when the cells experience limiting CO 2 conditions; this compartmentalization is a component of the CO 2 Concentrating Mechanism (CCM), which facilitates photosynthetic CO 2 fixation as environmental levels of inorganic carbon (Ci) decline. Changes in the spatial distribution of mitochondria in green algae have also been observed under CO 2 limitation, although a role for this reorganization in CCM function remains unclear. We used the green microalga Chlamydomonas reinhardtii to monitor changes in mitochondrial position and ultrastructure as cells transition between high CO 2 and Low/Very Low CO 2 (LC/VLC). Upon transferring cells to VLC, the mitochondria move from a central to a peripheral cell location and orient in parallel tubular arrays that extend along the cell’s apico-basal axis. We show that these ultrastructural changes correlate with CCM induction and are regulated by the CCM master regulator CIA5. The apico-basal orientation of the mitochondrial membranes, but not the movement of the mitochondrion to the cell periphery, is dependent on microtubules and the MIRO1 protein, with the latter involved in membrane–microtubule interactions. Furthermore, blocking mitochondrial respiration in VLC-acclimated cells reduces the affinity of the cells for Ci. Overall, our results suggest that mitochondrial repositioning functions in integrating cellular architecture and energetics with CCM activities and invite further exploration of how intracellular architecture can impact fitness under dynamic environmental conditions.

CO2 concentrating mechanism↗
DOE OSTI2025

Adapting C 4 photosynthesis to atmospheric change and increasing productivity by elevating Rubisco content in sorghum and sugarcane

Meta-analyses and theory show that with rising atmospheric [CO 2 ], Rubisco has become the greatest limitation to light-saturated leaf CO 2 assimilation rates (A sat ) in C 4 crops. So would transgenically increasing Rubisco increase A sat and result in increased productivity in the field? Here, we successfully overexpressed the Rubisco small subunit (RbcS) with Rubisco accumulation factor 1 (Raf1) in both sorghum and sugarcane, resulting in significant increases in Rubisco content of 13 to 25% and up to 90% respectively. A sat increased 12 to 15% and Rubisco enzyme activity ~40% in three independent transgenic events of both species. Sorghum plants also showed increased speeds of photosynthetic induction and decreased bundle sheath leakiness. These improvements translated into average increases of 15.5% in biomass in field-grown sorghum and a 37 to 81% increase in greenhouse-grown sugarcane. This suggests a potential opportunity to achieve substantial increases in productivity of this key economically important clade of C 4 crops, future proofing their value under global atmospheric change.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Multistage nucleation pathway in LiF molten salt mirrors the crystal–melt interface structure

Despite over a century of studies, fundamental questions remain about the processes governing crystal nucleation from melts or solutions. Research over the past three decades has presented mounting evidence for kinetic pathways of crystal nucleation that are more complex than envisioned by the simplest forms of classical theory. Such observations have been presented for colloidal and elemental systems with covalent and metallic bonding. Despite the technological and geochemical importance of molten salts, similar studies for these ionically bonded systems are currently lacking. Here we develop a machine learning interatomic potential for a model ionic system: LiF. The potential features quantum-level accuracy for both liquid and multiple solid polymorphs over wide temperature and pressure ranges and accurately reproduces experimentally measured properties. Thanks to the efficiency of the potential, which enables microsecond-scale molecular dynamics simulations, induction times for nucleation of LiF solids from their melts are computed over a range of undercoolings. With the aid of a set of robust local order parameters established here, the simulations reveal that homogeneous crystal nucleation in undercooled melts preferentially initiates from liquid regions showing slow dynamics and high bond orientational order simultaneously, and the second-shell order of both precritical nuclei and the surface of postcritical nuclei is dominated by hexagonal close packing and body-centered cubic local structure, even though the nucleus core is dominated by face-centered cubic structure corresponding to the stable rocksalt crystal structure. Finally, we establish a connection between the crystallization pathway and the equilibrium crystal-melt interface structure.

Applied Physical Sciences↗
DOE OSTI2025

The GRAS protein RAM1 interacts with WRI transcription factors to regulate plant genes required for arbuscule development and function

During arbuscular mycorrhiza (AM) symbiosis AM fungi form tree-shaped structures called arbuscules in root cortex cells of host plants. Arbuscules and their host cells are central for reciprocal nutrient exchange between the symbionts.REQUIRED FOR ARBUSCULAR MYCORRHIZATION1(RAM1) encodes a GRAS protein crucial for transcriptionally regulating plant genes needed for arbuscule development and nutrient exchange. Similar to other GRAS proteins, RAM1 likely does not bind to DNA and how RAM1 activates its target promoters remained elusive. Here, we demonstrate that RAM1 interacts with five AM-induced APETALA 2 (AP2) transcription factors of the WRINKLED1-like family called CTTC MOTIF-BINDING TRANSCRIPTION FACTOR1 (CBX1), WRI3, WRI5a, WRI5b, and WRI5c via a C-terminal domain containing the M2/M2a motif. This motif is conserved and enriched in WRI proteins encoded by genomes of AM-competent plants. RAM1 together with any of these WRI proteins activates the promoters of genes required for symbiotic nutrient exchange, namelyRAM2,STUNTED ARBUSCULES (STR),andPHOSPHATE TRANSPORTER 4 (PT4), inNicotiana benthamianaleaves. This activation as well as target promoter induction inLotus japonicushairy roots depends onMYCS(MYCORRHIZA SEQUENCE)-elements andAW-boxes, previously identified as WRI-binding sites. TheWRIgenes are activated in two waves: Transcription ofRAM1,CBX1,andWRI3is coregulated by calcium- and calmodulin-dependent protein kinase-activated CYCLOPS, through theAMCYC-REin their promoter, and DELLA, whileWRI5a,b,andcpromoters containMYCS-elements andAW-boxes and can be activated by RAM1 heterocomplexes with CBX1 or WRI3. We propose that RAM1 provides an activation domain to DNA-binding WRI proteins to activate genes with central roles in AM development and function.

Science & Technology - Other Topics↗
DOE OSTI2026

Acclimation to high and low diurnal light is flexible in Chlamydomonas reinhardtii

Chlamydomonas acclimates to repeated low (LL) or high light (HL) days by changing the abundance of photosynthetic complexes and the ultrastructure of its thylakoid membranes. These phenotypes persist through the night phases, suggesting a readiness for the daylight environment that is routinely experienced despite the intervening dark periods [S. Dupuis et al., Plant Cell 37, koaf086 (2025), 10.1093/plcell/koaf086]. Here, we investigate how prior acclimation impacts algal fitness upon a change in daylight intensity and how quickly Chlamydomonas can reprogram its photoprotective strategy in a diurnal context. We performed a systems analysis of synchronized populations acclimated to diurnal LL when subjected to HL days and of populations acclimated to diurnal HL when subjected to LL days. In the latter case, diurnal photoacclimation decreased fitness during the first day at a new light intensity: HL-acclimated cells barely increased in size over the first LL period, and they failed to complete a cell cycle. However, although LL-acclimated cells showed severe photodamage after 6 h of HL, they recovered chloroplast form and function later that afternoon and successfully divided at nightfall. These cells rapidly altered their thylakoid membrane ultrastructure, increased their photoprotective quenching capacity, and decreased their inventory of photosystem and antenna proteins by the end of the first HL day. Transcriptomic and proteomic analyses revealed rapid induction of thousands of genes, including those encoding proteases, chaperones, and other proteins involved in the chloroplast unfolded protein response. These results show that the alga is highly flexible and competent to rapidly acclimate to changes in diurnal light intensity.

Diel↗
DOE OSTI2025

Control of core–shell nanoparticles properties through plasma synthesis: a computational study

The improved properties of core–shell nanoparticles (CSNPs) over homogeneous nanoparticles (NPs) have expanded and diversified the applications of these nanomaterials. However, controlling the properties of CSNPs can be a challenging task. Low temperature plasmas have proven to be an effective method of producing NPs with uniform size and morphology, and high yield. That said, NP transport and growth dynamics are sensitive to LTP properties. We report on a computational investigation of the evolution of Ge–Si CSNP properties as a function of operating conditions through the modeling of a flowing, two-zone inductively coupled plasma (ICP) reactor. Ar/GeH 4 and Ar/SiH 4 gas mixtures were supplied to separate plasma zones at a pressure of 1 Torr to promote growth of Ge cores and Si shells. The negatively charged CSNPs are trapped electrostatically in the vicinity of the antennas where the plasma is generated and where the majority of particle growth occurs. Particles that grow to a critical size are then de-trapped by fluid drag due to neutral gas flow. A two-dimensional hybrid plasma model coupled with a three-dimensional kinetic NP transport model were utilized to resolve plasma chemistry and NP growth processes that take place on distinct timescales. The trends in CSNP properties and trapping mechanisms associated with flow rate, applied ICP power and inlet precursor fraction are discussed. While the spatial distribution of plasma produced radical species can have significant impact on the NP growth process, the NP transport dynamics are what ultimately dictates the growth environment that is unique to each particle and so determines their final dimension and composition. The key to optimizing reactor conditions involves controlling the spatial density of growth species and plasma profile as a means to tailor particle trapping dynamics suitable to produce CSNPs for a specific application.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Optimization of the N ∥ Upshift in the DIII-D high field side lower hybrid current drive experiment

High field side lower hybrid current drive (LHCD) is one potential candidate for efficient non-inductive current drive in tokamak power plants, and the first test of this technology will occur on the DIII-D tokamak during the 2024 campaign. Previous LFS launch experiments operated in the multi-pass regime and relied on scrape-off layer interactions to close the spectral gap. In the DIII-D experiment, single-pass damping is achievable via an upshift in the parallel refractive index N ∥ caused by mode converting twice (slow → fast → slow). This mode conversion affects the ray trajectories and can lead to enhanced N ∥ upshift depending on where mode conversion occurs. Compared to multi-pass absorption experiments, the optimization of launched N ∥ and plasma parameters can be counter-intuitive: increased density may increase efficiency and smaller N ∥,launch tend to damp closer to the separatrix. A hard x-ray camera installed to measure the bremsstrahlung (50–250 keV) radiation from LHCD-generated fast electrons is capable of verifying the trends reporting in this paper through comparison to the ray-tracing/Fokker–Planck codes GENRAY/CQL3D.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Effect of rotation on negative triangularity plasmas in DIII-D

At the DIII-D tokamak, plasmas with negative triangularity (NT) have been found to have similar energy confinement times as H-mode plasmas with positive triangularity. These NT plasmas also have a stable edge that inhibits H-mode, lacks dangerous edge transients, and has naturally low impurity confinement. For these reasons, NT plasmas have the potential to be a transformative reactor scenario. To determine the importance of strong co-current neutral beam torque for NT performance at DIII-D, scans of neutral beam torque at constant neutral beam power have been performed. These scans have shown that the energy confinement time for a basic, inductive NT scenario (q 95 ≈ 2.8) decreases by 16% when torque is reduced to reactor levels. This reduction in confinement can be replicated with gyrofluid modeling that isolates the role of E x B shear in the change in transport. In a separate set of discharges with lower plasma current (q 95 ≈ 2.5), no significant correlation between confinement time and rotation was found. Throughout this investigation, excellent MHD stability was observed, even with very low toroidal rotation. Further, low impurity confinement was found at multiple rotation levels. Throughout the campaign, rotation near the edge was counter-current, consistent with the measurement of counter-current intrinsic edge rotation, and these observations agree with NT results from the TCV tokamak.

confinement↗
DOE OSTI2025

Optimization of simulated high-field side lower hybrid current drive coupling using machine learning predictions of scrape-off layer density

Lower hybrid current drive (LHCD) is a potential source of non-inductive off-axis current drive (CD) for tokamaks. Although LHCD has been successfully deployed on a number of tokamaks, it is highly sensitive to the scrape-off layer (SOL) conditions local to the LHCD launcher. Large gaps between the launcher and plasma core, SOL turbulence, or edge density perturbations due to edge-localized modes can hamper CD or cause large reflected power. These coupling issues in part motivated the installation of an LHCD launcher on the high-field side (HFS) of DIII-D. On the HFS, the SOL is less turbulent and more controllable compared to the low-field side. This quiescence may result in more predictable edge conditions and thus a more predictable CD. Here, in this work, HFS SOL reflectometry measurements are predicted from global plasma parameters using machine learning models. The SOL predictions coupled with the full-wave simulation of the LHCD launcher allow for the prediction of reflected power, directivity, and arcing risk before the discharge. Launcher performance is then optimized using multi-objective Bayesian optimization, finding the shot parameters that result in an optimal SOL density that maximizes CD while minimizing the risk of arcing. The predictions and optimizations of LHCD performance are then accelerated using a surrogate model of the full-wave LHCD simulation.

Bayesian optimization↗
DOE OSTI2026

Magneto-optical study of Nb thin films for superconducting qubits

Abstract Among the recognized sources of decoherence in superconducting qubits, the spatial inhomogeneity of the superconducting state and the possible presence of magnetic-flux vortices remain comparatively underexplored. Niobium is commonly used as a structural material in transmon qubits that host Josephson junctions, and excess dissipation anywhere in the transmon can become a bottleneck that limits overall quantum performance. The metal/substrate interfacial layer may simultaneously host pair-breaking loss channels (e.g. two-level systems) and control thermal transport, thereby affecting dissipation and temperature stability. Here, we use quantitative magneto-optical imaging of the magnetic-flux distribution to characterize the homogeneity of the superconducting state and the critical current density, j c , in niobium films fabricated under different sputtering conditions. The imaging reveals distinct flux-penetration regimes, ranging from a nearly ideal Bean critical state to strongly nonuniform thermo-magnetic dendritic avalanches. By fitting the measured magnetic-induction profiles, we extract j c and try to correlate it with film physical properties and with measured qubit internal quality factors. Our results indicate that the Nb/Si interlayer can be a significant contributor to decoherence and should be considered an important factor that must be optimized.

Datta, Amlan [Ames National Laboratory; Iowa State↗
DOE OSTI2025

Revealing the loss mechanisms of a 3D superconducting microwave cavity for use in a dark matter search

Superconducting microwave cavities have found applications in many areas including quantum computing, particle accelerators, and dark matter searches. Their extremely high quality factors translate to very narrow bandwidth, which makes them key components of sensitive detectors. In this study, we aim to understand the loss mechanisms of an aluminium cavity, with a fundamental mode frequency of about 2.5123 GHz, and how they change as the cavity material transitions from the superconducting to normal state. We found that at temperatures not much lower than the transition temperature $T_c$, losses are dominated by quasiparticle excitations and are well described by the Bardeen–Cooper–Schrieffer theory. The exponential decrease of the quasiparticle density below $T_c$ results in a 1000-fold increase of the quality factor, as well as a shift of the resonance frequency due to the change of the kinetic inductance of the superconductor. At very low temperatures, losses due to two-level systems begin to dominate giving a peak in the quality factor of about 2.76 x 10 7 at 130 mK. Understanding the loss mechanisms is invaluable, as the working temperature of the cavity may vary during operation regardless of its application.

Physics - Physics of elementary particles and fiel↗
DOE OSTI2024

Overview of ASDEX upgrade results in view of ITER and DEMO

Experiments on ASDEX Upgrade (AUG) in 2021 and 2022 have addressed a number of critical issues for ITER and EU DEMO. A major objective of the AUG programme is to shed light on the underlying physics of confinement, stability, and plasma exhaust in order to allow reliable extrapolation of results obtained on present day machines to these reactor-grade devices. Concerning pedestal physics, the mitigation of edge localised modes (ELMs) using resonant magnetic perturbations (RMPs) was found to be consistent with a reduction of the linear peeling-ballooning stability threshold due to the helical deformation of the plasma. Conversely, ELM suppression by RMPs is ascribed to an increased pedestal transport that keeps the plasma away from this boundary. Candidates for this increased transport are locally enhanced turbulence and a locked magnetic island in the pedestal. The enhanced D-alpha (EDA) and quasi-continuous exhaust (QCE) regimes have been established as promising ELM-free scenarios. Here, the pressure gradient at the foot of the H-mode pedestal is reduced by a quasi-coherent mode, consistent with violation of the high-n ballooning mode stability limit there. This is suggestive that the EDA and QCE regimes have a common underlying physics origin. In the area of transport physics, full radius models for both L- and H-modes have been developed. These models predict energy confinement in AUG better than the commonly used global scaling laws, representing a large step towards the goal of predictive capability. A new momentum transport analysis framework has been developed that provides access to the intrinsic torque in the plasma core. In the field of exhaust, the X-Point Radiator (XPR), a cold and dense plasma region on closed flux surfaces close to the X-point, was described by an analytical model that provides an understanding of its formation as well as its stability, i.e., the conditions under which it transitions into a deleterious MARFE with the potential to result in a disruptive termination. With the XPR close to the divertor target, a new detached divertor concept, the compact radiative divertor, was developed. Here, the exhaust power is radiated before reaching the target, allowing close proximity of the X-point to the target. No limitations by the shallow field line angle due to the large flux expansion were observed, and sufficient compression of neutral density was demonstrated. With respect to the pumping of non-recycling impurities, the divertor enrichment was found to mainly depend on the ionisation energy of the impurity under consideration. In the area of MHD physics, analysis of the hot plasma core motion in sawtooth crashes showed good agreement with nonlinear 2-fluid simulations. This indicates that the fast reconnection observed in these events is adequately described including the pressure gradient and the electron inertia in the parallel Ohm’s law. Concerning disruption physics, a shattered pellet injection system was installed in collaboration with the ITER International Organisation. Thanks to the ability to vary the shard size distribution independently of the injection velocity, as well as its impurity admixture, it was possible to tailor the current quench rate, which is an important requirement for future large devices such as ITER. Progress was also made modelling the force reduction of VDEs induced by massive gas injection on AUG. The H-mode density limit was characterised in terms of safe operational space with a newly developed active feedback control method that allowed the stability boundary to be probed several times within a single discharge without inducing a disruptive termination. Regarding integrated operation scenarios, the role of density peaking in the confinement of the ITER baseline scenario (high plasma current) was clarified. The usual energy confinement scaling ITER98(p,y) does not capture this effect, but the more recent H20 scaling does, highlighting again the importance of developing adequate physics based models. Advanced tokamak scenarios, aiming at large non-inductive current fraction due to non-standard profiles of the safety factor in combination with high normalised plasma pressure were studied with a focus on their access conditions. A method to guide the approach of the targeted safety factor profiles was developed, and the conditions for achieving good confinement were clarified. Based on this, two types of advanced scenarios (‘hybrid’ and ‘elevated’

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

NSTX-U research advancing the physics of spherical tokamaks

Abstract The objectives of NSTX-U research are to reinforce the advantages of STs while addressing the challenges. To extend confinement physics of low- A , high beta plasmas to lower collisionality levels, understanding of the transport mechanisms that set confinement performance and pedestal profiles is being advanced through gyrokinetic simulations, reduced model development, and comparison to NSTX experiment, as well as improved simulation of RF heating. To develop stable non-inductive scenarios needed for steady-state operation, various performance-limiting modes of instability were studied, including MHD, tearing modes, and energetic particle instabilities. Predictive tools were developed, covering disruptions, runaway electrons, equilibrium reconstruction, and control tools. To develop power and particle handling techniques to optimize plasma exhaust in high performance scenarios, innovative lithium-based solutions are being developed to handle the very high heat flux levels that the increased heating power and compact geometry of NSTX-U will produce, and will be seen in future STs. Predictive capabilities accounting for plasma phenomena, like edge harmonic oscillations, ELMs, and blobs, are being tested and improved. In these ways, NSTX-U researchers are advancing the physics understanding of ST plasmas to maximize the benefit that will be gained from further NSTX-U experiments and to increase confidence in projections to future devices.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Overview of recent experimental results on the EAST Tokamak

Since the last IAEA-FEC in 2021, significant progress on the development of long pulse steady state scenario and its related key physics and technologies have been achieved, including the reproducible 403 s long-pulse steady-state H-mode plasma with pure radio frequency (RF) power heating. A thousand-second time scale (~1056 s) fully non-inductive plasma with high injected energy up to 1.73 GJ has also been achieved. The EAST operational regime of high β P has been significantly extended (H 98y2 > 1.3, β P ~ 4.0, β N ~ 2.4 and n e /n GW ~ 1.0) using RF and neutral beam injection (NBI). The full edge localized mode suppression using the n = 4 resonant magnetic perturbations has been achieved in ITER-like standard type-I ELMy H-mode plasmas with q 95 ≈ 3.1 on EAST, extrapolating favorably to the ITER baseline scenario. The sustained large ELM control and stable partial detachment have been achieved with Ne seeding. The underlying physics of plasma-beta effect for error field penetration, where toroidal effect dominates, is disclosed by comparing the results in cylindrical theory and MARS-Q simulation in EAST. Breakdown and plasma initiation at low toroidal electric fields (<0.3 V m -1 ) with EC pre-ionization is developed. A beneficial role on the lower hybrid wave injection to control the tungsten concentration in the NBI discharge is observed for the first time in EAST suggesting a potential way toward steady-state H-mode NBI operation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗