Search NASA⌕ Search

SEARCH · Search NASA

Results for “IR Spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

X-ray spectroscopic investigation of crystal fields in Ce 2 Rh 1 − x Ir x In 8 heavy fermions

The higher dimensionality in the crystal fields of the Ce 2 M In 8 ( M = Rh , Ir ) compounds and its interplay with hybridization and disorder are key ingredients to understand the complex phase diagrams by this family, which have been explored extensively by macroscopic techniques. Here, we present an investigation of the crystal-electric field schemes of Ce 2 Rh 1 − x Ir x In 8 using x-ray absorption spectroscopy. Our full multiplet calculations for the 4 f 1 configuration of Ce 3 + to describe the temperature-dependent linear dichroism in Ce 2 M In 8 are consistent with a Γ 7 1 = 1 − α 2 · | ∓ 3 2 〉 − | α | · | ± 5 2 〉 ground state containing a predominant | ± 3 / 2 〉 contribution that increases further with x . This enhancement is believed to favor superconductivity in Ce-based heavy fermion materials, observed in previous results in the Ce M In 5 family. Our recent observations shed light on the unexpected emergence of the ambient-pressure superconducting dome in the center of the composition phase diagram and its subsequent suppression on the Ir-rich side due to the early onset of fluctuations associated with the structurally more disordered state, inferred from previous neutron magnetic diffraction experiments. Published by the American Physical Society 2024

Christovam, D. S. (ORCID:0000000250698107)↗
DOE OSTI2023

Dual Emission Bands of a 2D Perovskite Single Crystal with Charge Transfer State Characteristics

Several hybrid halide 2D-perovskite species emit light with an emergent and controversial broadband emission Stokes-shifted down from the narrow band emission. This work uncovers the sub- and above-bandgap emission and absorption characteristics of PEA 2 PbI 4 prepared with gap states introduced during single crystal growth. Here, gap states led to coexistent intrinsic and heterostructured electronic frameworks that are selectively accessible with ultraviolet (UV) and infrared (IR) light, respectively, resulting in the phenomenon of photoluminescence (PL) switching from narrowband green to broadband red. Electron-energy dependent cathodoluminescence shows a relative increase in the broadband red PL intensity as the electron penetration depth increases from 30 nm to 2 μm, confirming the heterostructured framework is formed in the bulk of the crystal. Excitation–emission power slope of 2.5 and up-conversion pump transient absorption (TA) spectra suggest that the IR up-conversion excitation with red photoluminescence, peaked at 655 nm, is a multiphoton process occurring in the heterostructured framework through a nonlinear optical response. The energetic pathways toward the dual emission bands are revealed by pump–probe transient absorption spectroscopy, showing energetically broad gap states with high sensitivity to an IR pump are upconverted and subsequently quickly relax from high to low energy levels within 4 ps. Furthermore, the up-conversion red PL demonstrates a linear polarization with magnetic field effects, thus affirming that the band-like heterostructured framework is crystallographically aligned with characteristics of spatially extended charge-transfer states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

CLEAR: The Ionization and Chemical-enrichment Properties of Galaxies at 1.1 < z < 2.3

We use deep spectroscopy from the Hubble Space Telescope Wide-Field-Camera 3 IR grisms combined with broadband photometry to study the stellar populations, gas ionization and chemical abundances in star-forming galaxies at z ~ 1.1–2.3. The data stem from the CANDELS Lyα Emission At Reionization (CLEAR) survey. At these redshifts, the grism spectroscopy measure the [O II] λλ3727, 3729, [O III]λλ4959, 5008, and Hβ strong emission features, which constrain the ionization parameter and oxygen abundance of the nebular gas. We compare the line-flux measurements to predictions from updated photoionization models (MAPPINGS V; Kewley et al.), which include an updated treatment of nebular gas pressure, $\mathrm{log}P/k={n}_{e}{T}_{e}$. Compared to low-redshift samples (z ~ 0.2) at fixed stellar mass, $\mathrm{log}{M}_{* }/{M}_{\odot }\,=$ 9.4–9.8, the CLEAR galaxies at z = 1.35 (1.90) have lower gas-phase metallicity, ${\rm{\Delta }}(\mathrm{log}Z)$ = 0.25 (0.35) dex, and higher ionization parameters, ${\rm{\Delta }}(\mathrm{log}q)$ = 0.25 (0.35) dex, where U ≡ q/c. We provide updated analytic calibrations between the [O III], [O II], and Hβ emission-line ratios, metallicity, and ionization parameter. The CLEAR galaxies show that at fixed stellar mass, the gas ionization parameter is correlated with the galaxy specific star formation rates, where ${\rm{\Delta }}\mathrm{log}q\simeq 0.4\times {\rm{\Delta }}(\mathrm{log}\,\mathrm{sSFR})$, derived from changes in the strength of galaxy Hβ equivalent width. We interpret this as a consequence of higher gas densities, lower gas covering fractions, combined with a higher escape fraction of H-ionizing photons. We discuss both tests to confirm these assertions and implications this has for future observations of galaxies at higher redshifts.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Experimental and theoretical studies of the doubly substituted methyl-ethyl Criegee intermediate: Infrared action spectroscopy and unimolecular decay to OH radical products

In this work the infrared (IR) action spectrum of the doubly substituted methyl-ethyl Criegee intermediate (MECI) is observed in the CH stretch overtone region with detection of OH products. The MECI exhibits four conformers, all of which undergo unimolecular decay via a 1,4 H-atom transfer mechanism, followed by the rapid release of OH products. Conformers with different orientations of the carbonyl oxide group with respect to the methyl and ethyl substituents (i.e., anti and syn ) decay via distinct transition state barriers (16.1 kcal mol –1 and 15.4 kcal mol –1 , respectively). The observed IR action spectrum is in good agreement with the predicted anharmonic IR absorption spectrum, but exhibits significant congestion, which is attributed to couplings between spectroscopic bright states and nearby dark states. Energy-dependent OH appearance rates are measured upon IR excitation of the strongest features in the IR action spectrum and are found to be on the order of 10 6 –10 7 s –1 . The experimental rates are in good agreement with computed Rice–Ramsperger–Kassel–Marcus rates for the unimolecular decay of MECI at these energies, which incorporate quantum mechanical tunneling and sophisticated hindered rotor treatments, as well as high-level theoretical calculations of the TS barrier heights, rovibrational properties, and torsional barriers associated with the MECI conformers. Master equation modeling is used to predict thermal rates for the unimolecular decay of anti - and syn -MECI of 473 s –1 and 660 s –1 , respectively. Comparison with other previously studied Criegee intermediate systems provides insights into substituent effects on unimolecular decay under both energy-dependent and thermal conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Can Li: A Career in Catalysis

Prof. Can Li is distinguished for his seminal achievements in fundamental and applied researches in catalysis, especially in advancing the characterization of catalysts and catalytic reactions related to solar energy conversion and fine chemical synthesis. The scope of his research is wide ranging, and he is leading some of the fields. This account highlights his major scientific achievements in advancing the fundamental sciences of characterizing catalysts and understanding the mechanisms of catalytic reactions by developing in situ spectroscopic techniques (e.g., infrared (IR), ultraviolet (UV), Raman, space- and time-resolved spectroscopies and photoelectric imaging), and applying the obtained knowledge in the rational design and synthesis of catalysts for practical applications in photocatalytic, electrocatalytic and photoelectrocatalytic water splitting and CO 2 reduction, chiral synthesis in nanoreactors and ultradeep desulfurization of fuels, and fine chemical synthesis. In particular, his demonstration of the kiloton scale solar fuel production project will be introduced as a successful model for converting fundamental science into practical and impactful applications to convert CO 2 and water into solar fuels. This account also highlights his services to the catalysis communities and international collaborations for promoting catalysis science worldwide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Quantitative Determination of Electronic Effects in Free Radicals through Open-Shell Hammett Substituent Constants

Hammett substituent constants (σ), which quantify the electronic effects of functional groups, are widely used for predicting the properties of organic compounds and investigating reaction mechanisms. While these values have been obtained for a wide range of closed-shell substituents, measurements of analogous values for open-shell substituents are rare due to challenges associated with their short lifetimes. Here, in this report, we developed a combined experimental and computational approach for quantifying the electronic properties of open-shell substituents based on changes in nitrile vibrational frequencies (ν(C≡N)). By coupling pulse radiolysis and time-resolved infrared spectroscopy (PR-TRIR), we measured ν(C≡N) IR bands of 30 para - and meta -substituted benzonitriles bearing C-, N-, and S-centered radicals. A linear scaling relationship was obtained between these experimental values and values obtained from DFT calculations. Using these computed values, two different Hammett constants, σ m , and σ p + , were determined for a series of C-, N-, O-, S-, Si-, and B-centered radicals. The differences between σm and σp+ values enable the separate evaluation of inductive and resonance effects in these open-shell substituents. The results suggest that there are three classes of radicals: one is electron withdrawing (σ m , σ p + > 0), one is electron donating (σm, σp+ < 0), and one is inductively withdrawing but resonance donating (σ m > 0, σ p + < 0). Our study represents a general approach to the analysis of the electronic properties of open-shell species and has potential applications in a wide range of molecular processes involving free radical intermediates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Electrolyzer Performance Loss from Accelerated Stress Tests and Corresponding Changes to Catalyst Layers and Interfaces

Stress tests are developed for proton exchange membrane electrolyzers that utilize low catalyst loading, elevated potential, and frequent cycling with square- and triangle-waves to accelerate anode catalyst layer degradation during intermittent operation. Kinetics drive performance losses (ohmic/transport secondary) and are accompanied by decreasing exchange current density, decreasing cyclic voltammetric capacitance, and increasing polarization resistance. Decreased kinetics are likely due to a combination of iridium (Ir) migration into electrochemically inaccessible locations in the anode or membrane, Ir particle growth (supported by X-ray scattering), changes in the extent of the Ir oxidation state (supported by X-ray absorption spectroscopy), and anode catalyst layer reordering. Decreasing catalyst/transport layer contact and catalyst/membrane interfacial tearing may add contact resistances and account for increasing ohmic losses. Performance losses for low and moderate catalyst loading, as well as from accelerated and model wind/solar cycling protocols, were likewise dominated by kinetics but vary in severity. Additionally, accelerated cycling (1 cycle per minute) appears to reasonably accelerate relevant loss mechanisms and can be used to project electrolyzer lifetime from anode deterioration. Ongoing accelerated stress test development and studies into performance loss mechanisms will continue to be critical as electrolysis shifts to intermittent power and low-cost applications.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

Ultrafast Reaction Mechanisms in Multimolecular Ir-Co Catalytic Assemblies for Hydrogen Evolution

Nanosecond optical and X-ray spectroscopy with theoretical calculations reveal formation of a photo-induced distorted tetrahedral CoI intermediate in two Ir/Co multimolecular assemblies and show its protonation as the rate limiting step for H2 photocatalysis. Substitution of the catalysts´ pyridine group on the para position by -COOEt improves the protonation efficiency.

Velascoa, Lucia↗
DOE OSTI2020

A comprehensive ARPES study on the type-II Dirac semimetal candidate Ir 1-x Pt x Te 2

The transition metal dichalcogenide Ir 1-x Pt x Te 2 displays both superconductivity and a topological band structure. Using angle-resolved photoemission spectroscopy, we obtain a comprehensive understanding of the three-dimensional electronic structure in the normal state of Ir 1-x Pt x Te 2 for doping levels from x = 0.1 to 0.4, which spans the composition range of a superconducting state to a non-superconducting state. Many features of the electronic structure can be attributed to strong Te–Te interactions between the layers of the layered crystal structure and can be resolved by photon energy dependent measurements. We demonstrate that the type-II Dirac fermions can be successfully tuned via Pt doping, where the Dirac point lies close to the Fermi level for x = 0.1. The band evolution vs doping provides a clearer understanding of the relationship between the superconductivity and electronic structure. In addition, the β band in the superconducting samples locates the system close to a type-II van Hove singularity, where spin triplet paring symmetry has been predicted. Our results provide a comprehensive understanding of the band structure of Ir 1-x Pt x Te 2 , and we discuss the possibilities of the existence of topological superconductivity in this system.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Origin of enhanced water oxidation activity in an iridium single atom anchored on NiFe oxyhydroxide catalyst

The efficiency of the synthesis of renewable fuels and feedstocks from electrical sources is limited, at present, by the sluggish water oxidation reaction. Single-atom catalysts (SACs) with a controllable coordination environment and exceptional atom utilization efficiency open new paradigms toward designing high-performance water oxidation catalysts. Here, using operando X-ray absorption spectroscopy measurements with calculations of spectra and electrochemical activity, we demonstrate that the origin of water oxidation activity of IrNiFe SACs is the presence of highly oxidized Ir single atom (Ir 5.3+ ) in the NiFe oxyhydroxide under operating conditions. We show that the optimal water oxidation catalyst could be achieved by systematically increasing the oxidation state and modulating the coordination environment of the Ir active sites anchored atop the NiFe oxyhydroxide layers. Based on the proposed mechanism, we have successfully anchored Ir single-atom sites on NiFe oxyhydroxides (Ir 0.1 /Ni 9 Fe SAC) via a unique in situ cryogenic–photochemical reduction method that delivers an overpotential of 183 mV at 10 mA · cm – 2 and retains its performance following 100 h of operation in 1 M KOH electrolyte, outperforming the reported catalysts and the commercial IrO 2 catalysts. These findings open the avenue toward an atomic-level understanding of the oxygen evolution of catalytic centers under in operando conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Hyper-Raman spectroscopy of CeO 2

Cerium dioxide (CeO 2 ) belongs to the fluorite structure group (Oh 5 point group) resulting in one Raman active T 2g mode and two IR active T 1u TO and LO modes. The T 2g Raman band in CeO 2 has been used to probe the symmetric Ce-O vibrational mode of different sized nanoparticulates. Far infrared studies of the Ce-O interactions are difficult to conduct due to low optical transmission, efficiency of the detector and water absorption bands interfering with the measurements. The selection rules of hyper-Raman spectroscopy (HRS) allow the study of IR bands in the far infrared spectral region, such as the motion of the Ce atoms. For the first time, HRS was used to investigate the T 1u TO and LO IR modes in CeO 2 . The position and full-width half-maximum (FWHM) of the TO and LO bands in the HRS spectrum were used to investigate the spectral response in relation to particle size (i.e., phonon confinement). The investigation of CeO2 with HRS provides a research platform for future work in the study of ThO 2 , UO 2 and PuO 2 IR modes.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

The Chemical and Electronic Properties of Stability-Enhanced, Mixed Ir-TiO x Oxygen Evolution Reaction Catalysts

Iridium has emerged as the leading catalyst material for the anodic oxygen evolution reaction (OER) in acidic media. Often, iridium is mixed with more stable materials such as titanium. For these materials, the electronic structure of titanium plays a crucial role since with varying degrees of oxidation titanium transforms to semiconducting or even insulating phases. Yet, the electronic properties of mixed Ir-TiO x catalysts have never been systematically studied. In this study, we correlate the catalytic performance of mixed Ir-TiO x -based OER catalysts with the electronic structure of the surface layers. For this, a thin film material library with a 20-70 at. % Ir (Ir/[Ir + Ti]) compositional gradient was prepared. We used inductively coupled plasma mass spectrometry to test the OER activity and stability of the set of mixed Ir-TiO x catalyst candidate materials. Complementary, Ti L 2,3 - and O K-edge X-ray absorption spectroscopy and depth-dependent X-ray photoelectron spectroscopy measurements were performed to correlate the catalytic performance with the composition and electronic property profiles of these mixed Ir-TiO x OER anode catalysts. The spectroscopic analysis reveals that titanium is present as an intermixed matrix of semiconductive but stable TiO 2 , conductive but less stable titanium-suboxides (TiO x ), and highly conductive but highly unstable metallic Ti(0). The extent of the titanium oxidation strongly depends on the titanium content, with a lower degree of oxidation observed for lower titanium (and thus higher iridium) contents. For an iridium loading of 70 at. %, the respective mixed Ir-TiO x catalyst showed a similar OER activity to that of the pure metallic iridium (1.74 vs 1.59 VRHE, respectively) but with a 71% lower iridium dissolution rate relative to the pure metallic iridium. This demonstrates the stabilization effect of titanium addition while maintaining high OER activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Probing the tunability of magnetism with external pressure in metastable Sr 2 NiIrO 6 double perovskite

In Sr 2 NiIrO 6 long-range Ir-Ir antiferromagnetic exchange interactions have been reported to overcome the ferromagnetic Ni-Ir interactions hampering the otherwise expected ferromagnetic behavior. Prompted by this, a combination of x-ray absorption spectroscopy and x-ray diffraction at high pressure is used here to investigate the interplay between the magnetic structure of the Ir sublattice and lattice degrees of freedom. In this work, the compression of Sr 2 NiIrO 6 drives an unexpected nonmonotonic change of the x-ray magnetic circular dichroism (XMCD) spectra: The intensity first decreases in the 0- to 18-GPa range, then shows an increase in the 18- to 30-GPa range and again decreases for higher pressures. The XMCD intensity, a measure of the net magnetization in the Ir sublattice, however, is found to remain very low in the whole pressure range so the observed changes do not correspond with a transition from antiferromagnetic to ferromagnetic or ferrimagnetic order. The evolution of the XMCD is better explained in terms of a weakening/strengthening of the long-range antiferromagnetic (AFM) IrIr interaction between ferromagnetic planes associated with the reduction of the lattice parameters. In particular, a correlation can be established between the evolution of the b/a ratio and the weakening/strengthening of the AFM interaction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Iridate Li8IrO 6 : An Antiferromagnetic Insulator

In this work, a polycrystalline iridate Li 8 IrO 6 material was prepared via heating Li 2 O and IrO 2 starting materials in a sealed quartz tube at 650 °C for 48 h. The structure was determined from Rietveld refinement of room-temperature powder neutron diffraction data. Li 8 IrO 6 adopts the nonpolar space group $R\bar{3}$ with Li atoms occupying the tetrahedral and octahedral sites, which is supported by the electron diffraction and solid-state 7Li NMR. This results in a crystal structure consisting of LiO 4 tetrahedral layers alternating with mixed IrO 6 and LiO 6 octahedral layers along the crystallographic c -axis. The +4 oxidation state of Ir 4+ was confirmed by near-edge X-ray absorption spectroscopy. An in situ synchrotron X-ray diffraction study of Li 8 IrO 6 indicates that the sample is stable up to 1000 °C and exhibits no structural transitions. Magnetic measurements suggest long-range antiferromagnetic ordering with a Néel temperature (TN) of 4 K, which is corroborated by heat capacity measurements. The localized effective moment $μ_{\text{eff}}$ (Ir) = 1.73 $μ_{\text{B}}$ and insulating character indicate that Li 8 IrO 6 is a correlated insulator. First-principles calculations support the nonpolar crystal structure and reveal the insulating behavior both in paramagnetic and antiferromagnetic states.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Mechanistic Insights into CO 2 -to-CO Photoreduction by Proton-Responsive Imidazole–Pyridine Re(I) Complexes

Two Re(I) tricarbonyl complexes with imidazole-pyridine ligands, fac- [Re(CO) 3 (pbiH)Cl], (Re-pbiH), and fac-[Re(CO) 3 (bbzp)Cl] (Re-bbzp), where pbiH= 2-(2-pyridy)benzimidazole, bbzp = 2,6-bis(2-benzimidazolyl)pyridine, were synthesized, and their photophysical, electrochemical, and photochemical properties were investigated for application as photocatalysts for CO 2 -to-CO reduction. Upon light irradiation (λ > 370 nm) in CO 2 -saturated CH3CN using 1,3-dimethyl-2-phenyl-2,3-dihydro-1Hbenzo[ d]imidazole (BIH) as a sacrificial donor, Re-bbzp promotes CO formation with a turnover number (TON CO ) of 45 ± 2, whereas Re-pbiH displayed a significantly lower activity (TON CO = 8 ± 1). The role of the bbzp ligand in the photocatalytic behavior was examined in detail using IR spectroelectrochemistry (IR-SEC) together with in situ FTIR and UV−vis spectroscopy under photocatalytic conditions, revealing the formation of key intermediates involved in CO 2 activation. The superior activity of Re-bbzp was rationalized by its ability to function as a proton relay and two-electron acceptor. The role as a proton relay was further supported by the observation of a kinetic isotope effect (KIE = 1.5) when the deuterated electron donor BID was employed, in agreement with the unusual decrease in catalytic activity observed upon addition of Brønsted bases. Overall, these results provide new insights into the role of ligand-based proton-responsive sites in Re(I) tricarbonyl complexes and their impact on CO 2 reduction photocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Mid Infra-Red Laser Sensor for Continuous Sulfur Trioxide Monitoring to Improve Coal-Fired Power Plant Performance during Flexible Operations

During the course of this project, we performed exhaustive research and development of SO3/H2SO4 sensing technology for coal-fired power plant applications (Figure 1). The development culminated in a successful field campaign of a prototype continuous real-time H2SO4 monitor at a coal-fired power plant (TRL 6) accomplishing the primary goal of the project. The developed sensors utilize tunable laser absorption spectroscopy (TLAS) operating in the mid-infrared (Mid-IR) wavelength region, which is the so-called “molecular fingerprint” region. Systems operating in the Mid-IR have orders of magnitude more sensitivity than systems operating at shorter wavelengths, such as near-infrared (NIR). However, NIR systems are more widespread due to more mature supporting technology (e.g., fiber optics, optical components, etc.). In this project, we not only produced a specific Mid-IR sensor, we also advanced Mid-IR sensor technology in general through the development and demonstration of such supporting technology. In this project, we also developed proprietary broad tuning lasers enabling the ability to effectively measure SO3, H2SO4, H2O, and SO2. Different molecular species have unique spectral signatures that can be probed with lasers operating at different wavelengths. Standard TLAS uses relatively narrow wavelength tuning distributed feedback (DFB) lasers, which can typically only target a single species with narrow features, and are not appropriate for species with broad features, such as SO3 or H2SO4. In contrast, by developing unique, broad-tuning laser technology, we were able to measure these species, as well as SO2 and H2O simultaneously. Furthermore, to enable real-time analysis at a power plant, we modified a commercially available heated gas cell to operate in the Mid-IR wavelength range and fiber coupled the lasers to enable remote delivery of the beams. To generate reference data (library spectra), our collaborators at the University of California Irvine (UCI) developed a catalytic SO3 generation facility. It is worth mentioning that representative H2SO4 and SO3 Mid-IR spectra are not a part of any publicly available database and the data generated under this project is a valuable resource in and of itself. In addition, based on the UCI study we determined that detection of SO3 is complicated by the very strong SO2 absorption. For that reason, we concentrated on H2SO4 detection. Since SO3 and H2SO4 exist in a flue gas in a state of equilibrium, which depends on temperature and humidity, by measuring water concentration and controlling the temperature of the gas cell, we developed an approach to determine SO3 concentration from the H2SO4 measurement. During the development phase of the project, we performed three testing campaigns at our collaborator’s FERCo flue gas facility with conditions representative of the coal-fired power plant (~ 40ppm SO3, 1700ppm to 2800 ppm SO2, 10% water) with the exception of particulate matter. After three test campaigns at FERCo we performed field testing at Harrison Power Station. The final system was mounted on a duct and measured H2SO4, SO2 and water. The tests were highly successful with a demonstrated real-time H2SO4 precision of 1 ppm with a 1 second update. Our collaborators at EPRI conducted an industry survey and determined that there is a very high interest for the SO3/H2SO4 monitoring in the power generation industry as well as in heavy industries in general. Furthermore, work performed by OptoKnowledge beyond the scope of this project under a synergistic DOE SBIR determined another approach to SO3 detection. We applied for Phase II on this SBIR for development a of versatile SO3/H2SO4 sensor but were not selected. We are currently looking for another opportunity to leverage all the technological advancements produced by this project including but not limited to the flue gas facility at UCI, the hardware and software developed, and relationships with FERCo, EPRI CEMTEK, and Harrison Station.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

The CO Emission in the Taffy Galaxies (UGC 12914/15) at 60 pc Resolution. I. The Battle for Star Formation in the Turbulent Taffy Bridge

We present Atacama Large Millimeter/submillimeter Array observations at a spatial resolution of $0^{"}_{.}2$ (60 pc) of CO emission from the Taffy galaxies (UGC 12914/5). The observations are compared with narrowband Paα, mid-IR, radio continuum and X-ray imaging, plus optical spectroscopy. The galaxies have undergone a recent head-on collision, creating a massive gaseous bridge that is known to be highly turbulent. The bridge contains a complex web of narrow molecular filaments and clumps. The majority of the filaments are devoid of star formation, and fall significantly below the Kennicutt–Schmidt relationship for normal galaxies, especially for the numerous regions undetected in Paα emission. Within the loosely connected filaments and clumps of gas we find regions of high velocity dispersion that appear gravitationally unbound for a wide range of likely values of X CO . Like the "Firecracker" region in the Antennae system, they would require extremely high external dynamical or thermal pressure to stop them dissipating rapidly on short crossing timescales of 2–5 Myr. We suggest that the clouds may be transient structures within a highly turbulent multiphase medium that is strongly suppressing star formation. Despite the overall turbulence in the system, stars seem to have formed in compact hotspots within a kiloparsec-sized extragalactic H ii region, where the molecular gas has a lower velocity dispersion than elsewhere, and shows evidence for a collision with an ionized gas cloud. Like the shocked gas in the Stephan's Quintet group, the conditions in the Taffy bridge shows how difficult it is to form stars within a turbulent, multiphase, gas.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Low-cost calculation and analysis of 2D IR spectra of model diiron trinitrosyl complexes in the NO stretch region with vibrational perturbation theory

Two-dimensional infrared spectroscopy offers unique capabilities for probing vibrational coupling in complex metal–ligand systems. In this paper, we combine two-dimensional infrared spectroscopy with vibrational perturbation theory to investigate vibrational coupling in a diiron trinitrosyl complex across three stable redox states. Although these systems are challenging for electronic structure methods, we demonstrate that key features of experimental 2D IR spectra can be accurately reproduced using reduced-dimensional anharmonic calculations with a small harmonic frequency scaling. Analysis reveals that N–O stretching modes maintain high locality across all redox states, with coupling patterns that directly reflect variations in Fe–N bond strength. Using curvilinear coordinate analysis, we demonstrate these differences result from systematic changes in cubic anharmonic force constants rather than mode delocalization. Our results establish N–O stretches as sensitive probes of metal–ligand bonding strength, expanding the toolkit for studying biologically relevant nitrosyl complexes.

Moran, Hayden A. [Texas A&M University, College St↗