Search NASA⌕ Search

SEARCH · Search NASA

Results for “Identified”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Identifying Candidate Biomarkers of Ionizing Radiation in Human Pulmonary Microvascular Lumens Using Microfluidics—A Pilot Study

The microvasculature system is critical for the delivery and removal of key nutrients and waste products and is significantly damaged by ionizing radiation. Single-cell capillaries and microvasculature structures are the primary cause of circulatory dysfunction, one that results in morbidities leading to progressive tissue and organ failure and premature death. Identifying tissue-specific biomarkers that are predictive of the extent of tissue and organ damage will aid in developing medical countermeasures for treating individuals exposed to ionizing radiation. In this pilot study, we developed and tested a 17 µL human-derived microvascular microfluidic lumen for identifying candidate biomarkers of ionizing radiation exposure. Through mass-spectrometry-based proteomics, we detected 35 proteins that may be candidate early biomarkers of ionizing radiation exposure. This pilot study demonstrates the feasibility of using humanized microfluidic and organ-on-a-chip systems for biomarker discovery studies. A more elaborate study of sufficient statistical power is needed to identify candidate biomarkers and test medical countermeasures of ionizing radiation.

59 BASIC BIOLOGICAL SCIENCES↗

Whole-Genome SNP Analysis Identifies Putative Mycobacterium bovis Transmission Clusters in Livestock and Wildlife in Catalonia, Spain

The high-resolution WGS analyses of MTBC strains have provided useful insight for determining sources of infection for animal tuberculosis. In Spain, tuberculosis in livestock is caused by Mycobacterium bovis and Mycobacterium caprae, where wildlife reservoirs play an important role. We analyzed a set of 125 M. bovis isolates obtained from livestock and wildlife from Catalonia to investigate strain diversity and identify possible sources and/or causes of infection. Whole-genome SNP profiles were used for phylogenetic reconstruction and pairwise SNP distance analysis. Additionally, SNPs were investigated to identify virulence and antimicrobial resistance factors to investigate clade-specific associations. Putative transmission clusters (≤12 SNPs) were identified, and associated epidemiological metadata were used to determine possible explanatory factors for transmission. M. bovis distribution was heterogeneous, with 7 major clades and 21 putative transmission clusters. In order of importance, the explanatory factors associated were proximity and neighborhood, residual infection, livestock-wildlife interaction, shared pasture, and movement. Genes related to lipid transport and metabolism showed the highest number of SNPs. All isolates were pyrazinamide resistant, and five were additionally resistant to isoniazid, but no clade-specific associations could be determined. Our findings highlight the importance of high-resolution molecular surveillance to monitor bovine tuberculosis dynamics in a low-prevalence setting.

59 BASIC BIOLOGICAL SCIENCES↗

Candidate Variants for Additive and Interactive Effects on Bioenergy Traits in Switchgrass ( Panicum virgatum L.) Identified by Genome‐Wide Association Analyses

Switchgrass ( Panicum virgatum L.) is a promising herbaceous energy crop, but further gains in biomass yield and quality must be achieved to enable a viable bioenergy industry. Developing DNA markers can contribute to such progress, but depiction of genetic bases should be reliable, involving simple additive marker effects and also interactions with genetic backgrounds (e.g., ecotypes) or synergies with other markers. We analyzed plant height, C content, N content, and mineral concentration in a diverse panel consisting of 512 genotypes of upland and lowland ecotypes. We performed association analyses based on exome capture sequencing and tested 439,170 markers for marginal effects, 83,290 markers for marker × ecotype interactions, and up to 311,445 marker pairs for pairwise interactions. Analyses of pairwise interactions focused on subsets of marker pairs preselected on the basis of marginal marker effects, gene ontology annotation, and pairwise marker associations. Our tests identified 12 significant effects. Homology and gene expression information corroborated seven effects and indicated plausible causal pathways: flowering time and lignin synthesis for plant height; plant growth and senescence for C content and mineral concentration. Four pairwise interactions were detected, including three interactions preselected on the basis of pairwise marker correlations. Furthermore, a marker × ecotype interaction and a pairwise interaction were confirmed in an independent switchgrass panel. Our analyses identified reliable candidate variants for important bioenergy traits. Moreover, they exemplified the importance of interactive effects for depicting genetic bases and illustrated the usefulness of preselecting marker pairs for identifying pairwise marker interactions in association studies.

Ramstein, Guillaume P.↗

The Candidate Cluster and Protocluster Catalog (CCPC) of spectroscopically identified structures spanning 2.74 < z < 3.71

We developed a search methodology to identify galaxy protoclusters at z>2.74 and implemented it on a sample of ∼14,000 galaxies with previously measured redshifts. The results of this search are recorded in the Candidate Cluster and Protocluster Catalog (CCPC). The catalog contains 12 clusters that are highly significant overdensities (δ{sub gal}>7), 6 of which were previously known. We also identify another 31 candidate protoclusters (including four previously identified structures) of lower overdensities. CCPC systems vary over a wide range of physical sizes and shapes, from small, compact groups to large, extended, and filamentary collections of galaxies. This variety persists in the range from z = 3.71 to z = 2.74. These structures exist as galaxy overdensities (δ{sub gal}) with a mean value of 2, similar to the values found for other protoclusters in the literature. The median number of galaxies for CCPC systems is 11. Virial mass estimates are large for these redshifts, with 13 cases apparently having M>10{sup 15} M{sub ⊙}. If these systems are virialized, such masses would pose a challenge to ΛCDM.

79 ASTRONOMY AND ASTROPHYSICS↗

THE CANDIDATE CLUSTER AND PROTOCLUSTER CATALOG (CCPC). II. SPECTROSCOPICALLY IDENTIFIED STRUCTURES SPANNING 2 < z < 6.6

The Candidate Cluster and Protocluster Catalog (CCPC) is a list of objects at redshifts z > 2 composed of galaxies with spectroscopically confirmed redshifts that are coincident on the sky and in redshift. These protoclusters are identified by searching for groups in volumes corresponding to the expected size of the most massive protoclusters at these redshifts. In CCPC1 we identified 43 candidate protoclusters among 14,000 galaxies between 2.74 < z < 3.71. Here we expand our search to more than 40,000 galaxies with spectroscopic redshifts z > 2.00, resulting in an additional 173 candidate structures. The most significant of these are 36 protoclusters with overdensities δ {sub gal} > 7. We also identify three large proto-supercluster candidates containing multiple protoclusters at z = 2.3, 3.5 and z = 6.56. Eight candidates with N ≥ 10 galaxies are found at redshifts z > 4.0. The last system in the catalog is the most distant spectroscopic protocluster candidate known to date at z = 6.56.

79 ASTRONOMY AND ASTROPHYSICS↗

Deep Learning Identifies High-$z$ Galaxies in a Central Blue Nugget Phase in a Characteristic Mass Range

We use machine learning to identify in color images of high-redshift galaxies an astrophysical phenomenon predicted by cosmological simulations. This phenomenon, called the blue nugget (BN) phase, is the compact star-forming phase in the central regions of many growing galaxies that follows an earlier phase of gas compaction and is followed by a central quenching phase. We train a convolutional neural network (CNN) with mock "observed" images of simulated galaxies at three phases of evolution— pre-BN, BN, and post-BN—and demonstrate that the CNN successfully retrieves the three phases in other simulated galaxies. We show that BNs are identified by the CNN within a time window of ~0.15 Hubble times. When the trained CNN is applied to observed galaxies from the CANDELS survey at $z$ = 1–3, it successfully identifies galaxies at the three phases. We find that the observed BNs are preferentially found in galaxies at a characteristic stellar mass range, 10 9.2–10.3 $M_⊙$ at all redshifts. This is consistent with the characteristic galaxy mass for BNs as detected in the simulations and is meaningful because it is revealed in the observations when the direct information concerning the total galaxy luminosity has been eliminated from the training set. This technique can be applied to the classification of other astrophysical phenomena for improved comparison of theory and observations in the era of large imaging surveys and cosmological simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

Possibilities and Limitations of Kinematically Identifying Stars from Accreted Ultra-faint Dwarf Galaxies

Abstract The Milky Way has accreted many ultra-faint dwarf galaxies (UFDs), and stars from these galaxies can be found throughout our Galaxy today. Studying these stars provides insight into galaxy formation and early chemical enrichment, but identifying them is difficult. Clustering stellar dynamics in 4D phase space ( E , L z , J r , J z ) is one method of identifying accreted structure that is currently being utilized in the search for accreted UFDs. We produce 32 simulated stellar halos using particle tagging with the Caterpillar simulation suite and thoroughly test the abilities of different clustering algorithms to recover tidally disrupted UFD remnants. We perform over 10,000 clustering runs, testing seven clustering algorithms, roughly twenty hyperparameter choices per algorithm, and six different types of data sets each with up to 32 simulated samples. Of the seven algorithms, HDBSCAN most consistently balances UFD recovery rates and cluster realness rates. We find that, even in highly idealized cases, the vast majority of clusters found by clustering algorithms do not correspond to real accreted UFD remnants and we can generally only recover 6% of UFDs remnants at best. These results focus exclusively on groups of stars from UFDs, which have weak dynamic signatures compared to the background of other stars. The recoverable UFD remnants are those that accreted recently, z accretion ≲ 0.5. Based on these results, we make recommendations to help guide the search for dynamically linked clusters of UFD stars in observational data. We find that real clusters generally have higher median energy and J r , providing a way to help identify real versus fake clusters. We also recommend incorporating chemical tagging as a way to improve clustering results.

79 ASTRONOMY AND ASTROPHYSICS↗

Data from: Shared genomic regions between derivatives of a large segregating population of maize identified using bulked segregant analysis sequencing and traditional linkage analysis

Delayed transition from the vegetative stage to the reproductive stage of development and increased plant height have been shown to increase biomass productivity in grasses. The goal of this project was to detect quantitative trait loci using extremes from a large synthetic population, as well as a related recombinant inbred line mapping population for these two traits. Ten thousand individuals from a B73 × Mo17 noninbred population intermated for 14 generations (IBM Syn14) were grown at a density of approximately 16,500 plants ha−1. Flowering time and plant height were measured within this population. DNA was pooled from the 46 most extreme individuals from each distributional tail for each of the traits measured and used in bulk segregant analysis (BSA) sequencing. Allelic divergence at each of the ∼1.1 million SNP loci was estimated as the difference in allele frequencies between the selected extremes. Additionally, 224 intermated B73 × Mo17 recombinant inbred lines were concomitantly grown at a similar density adjacent to the large synthetic population and were assessed for flowering time and plant height. Using the BSA sequencing method, 14 and 13 genomic regions were identified for flowering time and plant height, respectively. Linkage mapping with the RIL population identified eight and three regions for flowering time and plant height, respectively. Of the regions identified, three colocalized between the two populations for flowering time and two colocalized for plant height. This study demonstrates the utility of using BSA sequencing for the dissection of complex quantitative traits important for production of lignocellulosic ethanol.

09 BIOMASS FUELS↗

Data from: Candidate variants for additive and interactive effects on bioenergy traits in switchgrass (Panicum virgatum L.) identified by genome-wide association analyses

Switchgrass is a promising herbaceous energy crop, but further gains in biomass yield and quality must be achieved to enable a viable bioenergy industry. Developing DNA markers can contribute to such progress, but depiction of genetic bases should be reliable, involving not only simple additive marker effects but also interactions with genetic backgrounds, e.g., ecotypes, or synergies with other markers. We analyzed plant height, carbon content, nitrogen content, and mineral concentration in a diverse panel consisting of 512 genotypes of upland and lowland ecotype. We performed association analyses based on exome capture sequencing and tested 439,170 markers for marginal effects, but also 83,290 markers for marker-by-ecotype interactions and up to 311,445 marker pairs for pairwise interactions. Analyses of pairwise interactions focused on subsets of marker pairs preselected based on marginal marker effects, gene ontology annotation, and pairwise marker associations. Our tests identified 12 significant effects. Homology and gene expression information corroborated seven effects and indicated plausible causal pathways: flowering time and lignin synthesis for plant height; plant growth and senescence for carbon content and mineral concentration. Four pairwise interactions were detected, including three interactions preselected based on pairwise marker correlations. Furthermore, one marker-by-ecotype interaction and one pairwise interaction were confirmed in an independent switchgrass panel. Our analyses identified reliable candidate variants for important bioenergy traits in switchgrass. Moreover, they exemplified the importance of interactive effects for the depiction of genetic bases, and illustrated the usefulness of preselection of marker pairs for identifying pairwise marker interactions in association testing.

09 BIOMASS FUELS↗

Identifying a regional aerosol baseline in the eastern North Atlantic using collocated measurements and a mathematical algorithm to mask high-submicron-number-concentration aerosol events

Abstract. High-time-resolution measurements of in situ aerosol and cloud properties provide the ability to study regional atmospheric processes that occur on timescales of minutes to hours. However, one limitation to this approach is that continuous measurements often include periods when the data collected are not representative of the regional aerosol. Even at remote locations, submicron aerosols are pervasive in the ambient atmosphere with many sources. Therefore, periods dominated by local aerosol should be identified before conducting subsequent analyses to understand aerosol regional processes and aerosol–cloud interactions. Here, we present a novel method to validate the identification of regional baseline aerosol data by applying a mathematical algorithm to the data collected at the U.S. Department of Energy's (DOE) Atmospheric Radiation Measurement (ARM) user facility in the eastern North Atlantic (ENA). The ENA central facility (C1) includes an aerosol observing system (AOS) for the measurement of aerosol physical, optical, and chemical properties at time resolutions from seconds to minutes. A second temporary supplementary facility (S1), located ∼0.75 km from C1, was deployed for ∼1 year during the Aerosol and Cloud Experiments (ACE-ENA) campaign in 2017. First, we investigate the local aerosol at both locations. We associate periods of high submicron number concentration (Ntot) in the fine-mode condensation particle counter (CPC) and size distributions from the Ultra-High Sensitivity Aerosol Spectrometer (UHSAS) as a function of wind direction using a meteorology sensor with local sources. Elevated concentrations of Aitken-mode (< 100 nm diameter) particles were observed in correspondence with the wind directions associated with airport operations. At ENA, the Graciosa Airport and its associated activities were found to be the main sources of high-concentration aerosol events at ENA, causing peaks in 1 min Ntot that exceeded 8000 and 10 000 cm−3 at C1, in summer and winter, respectively, and 5000 cm−3 at S1 in summer. Periods with high Ntot not associated with these wind directions were also observed. As a result, the diverse local sources at ENA yielded a poor relationship between Ntot measurements collected at C1 and S1 (R2=0.03 with a slope =0.05±0.001). As a first approach to mask these events, the time periods when the wind direction was associated with the airport operations (west to northwest and southeast to south at C1 and east to south at S1) were applied. The meteorological masks removed 38.9 % of the data at C1 and 43.4 % at S1, and they did not significantly improve the relationship between the two sites (R2=0.18 with a slope =0.06±0.001). Due to the complexity of high-Ntot events observed at ENA, we develop and validate a mathematical ENA Aerosol Mask (ENA-AM) to identify high-Ntot events using 1 min resolution data from the AOS CPC at C1 and S1. After its parameterization and application, ENA-AM generated a high correlation between Ntot in the summer at C1 and S1 (R2=0.87 with a slope =0.84±0.001). We identified the regional baseline at ENA to be 428±228 cm−3 in the summer and 346±223 cm−3 in the winter. Lastly, we compared masked measurements from the AOS with the ARM Aerial Facility (AAF) during flights over C1 in the summer to understand submicron aerosol vertical mixing over C1. The high correlation (R2=0.71 with a slope of 1.04±0.01) observed between C1 and the AAF Ntot collected within an area of 10 km surrounding ENA and at altitudes < 500 m indicated that the submicron aerosol at ENA was well mixed within the first 500 m of the marine boundary layer during the month of July during ACE-ENA. Our novel method for determining a regional aerosol baseline at ENA can be applied to other time periods and at other locations with validation by a secondary site or additional collocated measurements.

54 ENVIRONMENTAL SCIENCES↗

Identifying Sociomarkers of Pediatric Asthma Patients at Risk of Hospital Revisiting

ObjectiveAsthma is one of the most common chronic childhood diseases in the United States [2, 3]. In addition to its pervasiveness, pediatric asthma shows high sensitivity to the environment. Combining medical-social dataset with machine learning methods we demonstrate how socio-markers play an important role in identifying patients at risk of hospital revisits due to pediatric asthma within a year.IntroductionA socio-marker is a measurable indicator of social conditions where a patient is embedded in and exposed to, being analogous with a biomarker indicating the severity or presence of some disease state. Social factors are one of the most clinical health determinants [1], which play a critical role in explaining health outcomes. Socio-markers can help medical practitioners and researchers to reliably identify high-risk individuals in a timely manner.MethodsWe collected data from three different sources: pediatric asthma encounter records from Jan 1st, 2016 to Dec 31st, 2016 at a children’s hospital, the 2010 U.S census data and neighborhood quality survey data by Memphis Property Hub. After merging these datasets we examine the effect of social features in identifying the patients who visited the hospital more than once during the observation period. We only use the first time visit (3,678 cases) to avoid over-counting of the same patients. In addition to demographic features (age, gender, insurance type, and race (African American and White)), we incorporate the social features such as the proportion of individuals living below the federal poverty level, blight prevalence, neighborhood quality, neighborhood quality inequality, trash dumping presence, the broken window pervasiveness within the zip code area of patients’ residence are included.We then implemented a Support Vector Machine (SVM) based classification model using abovementioned 11 social features. The classification outcome is either patient visits the hospital only one-time (class 0) or revisits the hospital within a year (class 1). Among 3,678 unique patients in the dataset, only 823 pediatric patients revisited hospital with asthma. So, to overcome the class imbalance issue, we have used 823 patients’ data (randomly selected in 1,000 iterations) from each class. Further, to avoid overfitting and ensure generalizability, we divided the dataset as training, test, and validation with a proportion of 60%, 20%, and 20%, respectively. The reported test (5-folds cross-validation using training and testing data) and validation accuracy of the SVM method are averaged over 1,000 iterations to avoid sampling error and bias.ResultsThe proposed socio-marker model resulted in an average classification accuracy of 63.70% for the test set and 63.67 % for the validation set. Further, the average specificity (the total true negative cases divided by the sum of true negative and false positive) and sensitivity (the total number of true positive cases divided by the sum of positive predicted cases) is found to be 62.79% and 64.77%, respectively for the test set and 62.79% and 64.83%, respectively for the validation set. Results of this study suggest that socio-marker features that are not directly related to a patient’s medical conditions can still predict whether the patient will come back to the hospital within a year or not with approximately 64% accuracy.ConclusionsBringing the socio-marker features in the surveillance system may ease the burden of detecting the patients at risk of revisiting the hospital. The results should be interpreted with caution because we only used 12-month period of observation and the visit beyond the observation window is not considered. Also the patients may have visited different hospitals which are not captured in the data.References1. Booske BC, Athens JK, Kindig DA, Park H, Remington PL: Different perspectives for assigning weights to determinants of health. University of Wisconsin: Population Health Institute 2010.2. Subbarao P, Mandhane PJ, Sears MR: Asthma: epidemiology, etiology and risk factors. Canadian Medical Association Journal 2009, 181(9):E181-E190.3. Gold DR, Wright R: Population disparities in asthma. Annu Rev Public Health 2005, 26:89-113.

Shin, Eun Kyong↗

3D reconstruction identifies loci linked to variation in angle of individual sorghum leaves

Selection for yield at high planting density has reshaped the leaf canopy of maize, improving photosynthetic productivity in high density settings. Further optimization of canopy architecture may be possible. However, measuring leaf angles, the widely studied component trait of leaf canopy architecture, by hand is a labor and time intensive process. Here, we use multiple, calibrated, 2D images to reconstruct the 3D geometry of individual sorghum plants using a voxel carving based algorithm. Automatic skeletonization and segmentation of these 3D geometries enable quantification of the angle of each leaf for each plant. The resulting measurements are both heritable and correlated with manually collected leaf angles. This automated and scaleable reconstruction approach was employed to measure leaf-by-leaf angles for a population of 366 sorghum plants at multiple time points, resulting in 971 successful reconstructions and 3,376 leaf angle measurements from individual leaves. A genome wide association study conducted using aggregated leaf angle data identified a known large effect leaf angle gene, several previously identified leaf angle QTL from a sorghum NAM population, and novel signals. Genome wide association studies conducted separately for three individual sorghum leaves identified a number of the same signals, a previously unreported signal shared across multiple leaves, and signals near the sorghum orthologs of two maize genes known to influence leaf angle. Automated measurement of individual leaves and mapping variants associated with leaf angle reduce the barriers to engineering ideal canopy architectures in sorghum and other grain crops.

3D reconstruction↗

DISCo-microbe: design of an identifiable synthetic community of microbes

Microbiomes are extremely important for their host organisms, providing many vital functions and extending their hosts’ phenotypes. Natural studies of host-associated microbiomes can be difficult to interpret due to the high complexity of microbial communities, which hinders our ability to track and identify individual members along with the many factors that structure or perturb those communities. For this reason, researchers have turned to synthetic or constructed communities in which the identities of all members are known. However, due to the lack of tracking methods and the difficulty of creating a more diverse and identifiable community that can be distinguished through next-generation sequencing, most such in vivo studies have used only a few strains. To address this issue, we developed DISCo-microbe, a program for the design of an identifiable synthetic community of microbes for use in in vivo experimentation. The program is composed of two modules; (1) create, which allows the user to generate a highly diverse community list from an input DNA sequence alignment using a custom nucleotide distance algorithm, and (2) subsample, which subsamples the community list to either represent a number of grouping variables, including taxonomic proportions, or to reach a user-specified maximum number of community members. As an example, we demonstrate the generation of a synthetic microbial community that can be distinguished through amplicon sequencing. The synthetic microbial community in this example consisted of 2,122 members from a starting DNA sequence alignment of 10,000 16S rRNA sequences from the Ribosomal Database Project. We generated simulated Illumina sequencing data from the constructed community and demonstrate that DISCo-microbe is capable of designing diverse communities with members distinguishable by amplicon sequencing. Using the simulated data we were able to recover sequences from between 97–100% of community members using two different post-processing workflows. Furthermore, 97–99% of sequences were assigned to a community member with zero sequences being misidentified. We then subsampled the community list using taxonomic proportions to mimic a natural plant host–associated microbiome, ultimately yielding a diverse community of 784 members. DISCo-microbe can create a highly diverse community list of microbes that can be distinguished through 16S rRNA gene sequencing, and has the ability to subsample (i.e., design) the community for the desired number of members and taxonomic proportions. Although developed for bacteria, the program allows for any alignment input from any taxonomic group, making it broadly applicable. The software and data are freely available from GitHub and Python Package Index (PYPI).

16S rRNA↗

Fracture trends identified by ERTS-1 imagery in Utah and Nevada

The author has identified the following significant results. In the Utah-Nevada area, linear structural trends recorded on ERTS-1 imagery conform in part to previously recognized structures. In addition, the ERTS-1 imagery reveals cryptic structures not previously identified and not readily apparent in other imagery. These structures are illustrated by prominent east-west trending structures which appear to be concentrated in pre-volcanic rocks. This suggests that the structures are older than many of those with other trends which are equally prominent in volcanic and non-volcanic terrain. Since the older east-west structures may have controlled early Tertiary emplacement of magma or the ascent of mineralizing fluids, their recognition is important in minerial exploration. Soil-gas sampling and analysis for mercury content is being continued over structures, and projected trends of buried structures which appear, from studies of ERTS-1 imagery, to be favorable to mineralization. Comparison of ERTS-1 and Skylab imagery indicated that ERTS-1 imagery records more previously unrecognized linear structures than the Skylab imagery. In differentiating and identifying different rock types, the Skylab imagery appears to be more effective.

Jensen, M. L.↗

On identifying transfer functions and state equations for linear systems.

Two methods are established for identifying constant-coefficient, C to the 2n power type of noise-free linear systems if the time response data of the input-output or of all states are known. 2n response data are required to identify an nth-order transfer function or state equation for an unknown linear system. The order of the unknown system can be identified by checking a sequence of determinants. The Z transform and its inversion are mainly used.

Shieh, L. S.↗

Parameter identifiability of linear dynamical systems

It is assumed that the system matrices of a stationary linear dynamical system were parametrized by a set of unknown parameters. The question considered here is, when can such a set of unknown parameters be identified from the observed data? Conditions for the local identifiability of a parametrization are derived in three situations: (1) when input/output observations are made, (2) when there exists an unknown feedback matrix in the system and (3) when the system is assumed to be driven by white noise and only output observations are made. Also a sufficient condition for global identifiability is derived.

Glover, K.↗

On the identifiability of linear dynamical systems

Consider the situation in which the unknown parameters of a stationary linear system may be parametrized by a set of unknown parameters. The question thus arises of when such a set of parameters can be uniquely identified on the basis of observed data. This problem is considered here both in the case of input and output observations and in the case of output observations in the presence of a white noise input. Conditions for local identifiability are derived for both situations and a sufficient condition for global identifiability is given for the former situation, i.e., when simultaneous input and output observations are available.

Glover, K.↗

Controller design and parameter identifiability studies for a large space antenna

The problem of control systems synthesis and parameter identifiability are considered for a large, space-based antenna. Two methods are considered for control system synthesis, the first of which uses torque actuators and collocated attitude and rate sensors, and the second method is based on the linear-quadratic-Gaussian (LQG) control theory. The predicted performance obtained by computing variances of pointing, surface and feed misalignment errors in the presence of sensor noise indicates that the LQG-based controller yields superior results. Since controller design requires the knowledge of the system parameters, the identifiability of the structural parameters is investigated by obtaining Cramer-Rao lower bounds. The modal frequencies are found to have the best identifiability, followed by damping ratios, and mode-slopes.

Joshi, S. M.↗