Search NASA⌕ Search

SEARCH · Search NASA

Results for “Instabilities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Three-flavor collective neutrino conversions with multi-azimuthal-angle instability in an electron-capture supernova model

We investigate the multi-azimuthal angle (MAA) effect on collective neutrino oscillation by considering the three-dimensional neutrino momentum distribution in a realistic electron-capture supernova model with an 8.8 M ⊙ progenitor. We find that the MAA effect induces collective flavor conversions at epochs when it is completely suppressed under the axial-symmetric approximation. This novel activity is switched on/off by the growth of the MAA instability and imprints additional time evolution in the expected neutrino event rate. We validate our results by extending the linear stability analysis into the three-flavor scheme including mixing angles, and confirm that the onset of collective neutrino oscillation matches the steep growth of flavor instability. Furthermore, we discuss how the MAA effect alters neutrino detection at Super-Kamiokande and DUNE.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Independent-hot-spot approach to multibeam laser-plasma instabilities

The independent-hot-spot model is used to develop an analytic formulation for multibeam laser-plasma instabilities in inhomogeneous plasmas. The model is applied to the absolute two-plasmon-decay instability and shows good agreement with simulations and experiments. Furthermore, the success of the model indicates the emergence of single-speckle behavior for sufficiently large speckles sizes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Energizing charged particles by an orbit instability in a slowly rotating magnetic field

In this work, the stability of charged particle motion in a uniform magnetic field with an added spatially uniform transverse rotating magnetic field (RMF) is studied analytically. It is found that the stability diagram of a single particle's orbit depends critically on the chosen boundary conditions. We show that for many boundary conditions and wide regions in the parameter space, RMFs oscillating far below the cyclotron frequency can cause linear instabilities in the motion which break μ invariance and energize particles. Such energization may appear at odds with the adiabatic invariance of μ; however, adiabatic invariance is an asymptotic result and does not preclude such heating by magnetic fields oscillating at slow frequencies. This mechanism may contribute to heating in the edge plasma of field-reversed configurations (FRCs) in rotamak-FRC experiments. Furthermore, these RMF-driven instabilities may significantly enhance azimuthal current drive during the formation of FRCs in such devices.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Measurement of pressure gradients near the interface in the viscous fingering instability

The viscous fingering instability, which forms when a less-viscous fluid invades a more-viscous one within a confined geometry, is an iconic system for studying pattern formation. For both miscible and immiscible fluid pairs the growth dynamics change after the initial instability onset and the global structures, typical of late-time growth, are governed by the viscosity ratio. Here we introduce an experimental technique to measure flow throughout the inner and outer fluids. This probes the existence of a new length scale associated with the local pressure gradients around the interface and allows us to compare our results to the predictions of a previously proposed model for late-time finger growth. Published by the American Physical Society 2024

Physics↗
DOE OSTI2020

Demonstration of Scale-Invariant Rayleigh-Taylor Instability Growth in Laser-Driven Cylindrical Implosion Experiments

Rayleigh-Taylor instability growth is shown to be hydrodynamically scale-invariant in convergent cylindrical implosions for targets that varied in radial dimension and implosion timescale by a factor of three. The targets were driven directly by laser irradiation providing a short impulse, and instability growth at an embedded aluminum interface occurs as it converges radially inward by a factor of2.25 and decelerates on a central foam core. Late-time growth factors of 14 are observed for a single-modem= 20 azimuthal perturbation at both scales, despite the differences in laser drive conditions between the experimental facilities, consistent with predictions from radiation-hydrodynamics simulations. This platform enables detailed investigations into the limits of hydrodynamic scaling in high-energy-density systems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Chiral Instabilities and the Onset of Chiral Turbulence in QED Plasmas

We present a first principles study of chiral plasma instabilities and the onset of chiral turbulence in QED plasmas with strong gauge matter interaction ( e 2 N f = 64 ), far from equilibrium. By performing classical-statistical lattice simulations of the microscopic theory, we show that the generation of strong helical magnetic fields from a helicity imbalance in the fermion sector proceeds via three distinct phases. During the initial linear instability regime the helicity imbalance of the fermion sector causes an exponential growth (damping) of magnetic field modes with right- (left-) handed polarization, for which we extract the characteristic growth (damping) rates. Secondary growth of unstable modes accelerates the helicity transfer from fermions to gauge fields and ultimately leads to the emergence of a self-similar scaling regime characteristic of a decaying turbulence, where magnetic helicity is efficiently transferred to macroscopic length scales. Within this turbulent regime, the evolution of magnetic helicity spectrum can be described by an infrared power spectrum with spectral exponent κ = 10.2 ± 0.5 and dynamical scaling exponents α = 1.14 ± 0.50 and β = 0.37 ± 0.13 .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Confinement Controls the Bend Instability of Three-Dimensional Active Liquid Crystals

Spontaneous growth of long-wavelength deformations is a defining feature of active liquid crystals. We investigate the effect of confinement on the instability of 3D active liquid crystals in the isotropic phase composed of extensile microtubule bundles and kinesin molecular motors. When shear aligned, such fluids exhibit finite-wavelength self-amplifying bend deformations. By systematically changing the channel size we elucidate how the instability wavelength and its growth rate depend on the channel dimensions. Experimental findings are qualitatively consistent with a minimal hydrodynamic model, where the fastest growing deformation is set by a balance of active driving and elastic relaxation. Furthermore, our results demonstrate that confinement determines the structure and dynamics of active fluids on all experimentally accessible length scales.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Ion Heating and Flow Driven by an Instability Found in Plasma Couette Flow

Here, we present the first observation of instability in weakly magnetized, pressure dominated plasma Couette flow firmly in the Hall regime. Strong Hall currents couple to a low frequency electromagnetic mode that is driven by high-β (>1) pressure profiles. Spectroscopic measurements show heating (factor of 3) of the cold, unmagnetized ions via a resonant Landau damping process. A linear theory of this instability is derived that predicts positive growth rates at finite β and shows the stabilizing effect of very large β, in line with observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Lattice instabilities and phonon thermal transport in TlBr

Materials with simple crystal structure usually exhibit substantial lattice thermal conductivity ( κ latt ) due to a scarcity of strong phonon-phonon scattering channels. Yet here we find simple CsCl-structure TlBr to have an extremely low room temperature κ latt ~ 0.5 W / m-K , while at low temperature we find a high κ latt of 155 W / m-K . This extreme range of conductivity behavior results from lattice-instability-related anharmonicity, effective only at temperatures above ~ 30 K . Manipulating these instabilities (e.g., pressure, strain) may yield a pathway to ultralow thermal conductivity via intrinsic phonon resistance in similar materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Instability Issue of Paralleled Dies in an SiC Power Module in Solid-State Circuit Breaker Applications

Paralleled dies in a power module could have instability issues during high current switching transients. Here, the instability is caused by the differential-mode oscillation among paralleled MOSFETs. Conventional analyses of paralleled MOSFETs’ stability are normally limited to a single operating point, which ignores the influences of the switching trajectory and nonlinear device parameters on stability. This article reveals that the switching trajectory can significantly influence parallel stability. The analysis is improved by solving eigenvalues of state-space modeling system matrices of all operating points that the switching trajectory goes through considering nonlinear device parameters. Higher voltage and current stresses result in greater real parts of complex eigenvalues, which explains why the paralleled MOSFETs are more unstable with higher voltage and current stresses. To improve stability in solid-state circuit breaker applications, we propose a method to manipulate the switching trajectory to avoid the unstable region where the conventional hard switching trajectory normally goes through. Experimental results show that the turn- off current capability can be increased from ~five times of rated current with the gate oscillation using the conventional turn- off trajectory to ~ten times of rated current without the gate oscillation using the optimal turn- off trajectory.

42 ENGINEERING↗
DOE OSTI2022

Characterizing Flow Instabilities During Transient Events in the Turbine Rim Seal Cavity

Abstract Gas turbine engine design requires considerations not only for long-term steady operation but also for critical transient events. Aircraft engines undergo significant stress during takeoff and landing, while power generation turbines must be flexible for hot restarts as renewable energy sources come online and offline. During these transient cycles, engines sustain wear and degradation that can lead to a reduction in the lifespan of their components and more frequent, costly maintenance. Cooling flows are often used to mitigate these effects, but can lead to complex and problematic flow interactions. This study uses high-frequency response pressure probes and heat flux gauges in the rim seal cavity of a one-stage research turbine to characterize the properties of large-scale flow structures during transient operation. A continuous-duration turbine testing facility provides the ability to assess the importance of these transients by first reaching steady-state operation before imposing transient behaviors. Although previous studies have conducted similar measurements for steady purge flows and wheel speeds, varying these parameters to simulate transient effects revealed several unique phenomena not identifiable with discrete steady measurements. The measurement approach connects the varied transient parameter to the behavior of the flow structures to enable a better understanding of the type of instability observed and the root cause of its formation. In particular, a relationship between instability cell formation and rim sealing effectiveness was identified using experimental data and was supported through computational simulations.

Engineering↗
DOE OSTI2022

The seeds and homogeneous nucleation of photoinduced nonthermal melting in semiconductors due to self-amplified local dynamic instability

Laser-induced nonthermal melting in semiconductors has been studied over the past four decades, but the underlying mechanism is still under debate. Here, by using an advanced real-time time-dependent density functional theory simulation, we reveal that the photoexcitation-induced ultrafast nonthermal melting in silicon occurs via homogeneous nucleation with random seeds originating from a self-amplified local dynamic instability. Because of this local dynamic instability, any initial small random thermal displacements of atoms can be amplified by a charge transfer of photoexcited carriers, which, in turn, creates a local self-trapping center for the excited carriers and yields the random nucleation seeds. Because a sufficient amount of photoexcited hot carriers must be cooled down to band edges before participating in the self-amplification of local lattice distortions, the time needed for hot carrier cooling is the response for the longer melting time scales at shorter laser wavelengths. This finding provides fresh insights into photoinduced ultrafast nonthermal melting.

42 ENGINEERING↗
DOE OSTI2020

Critical instability at moving keyhole tip generates porosity in laser melting

Laser powder bed fusion is a dominant metal 3D printing technology. However, porosity defects remain a challenge for fatigue-sensitive applications. Some porosity is associated with deep and narrow vapor depressions called keyholes, which occur under high-power, low–scan speed laser melting conditions. High-speed x-ray imaging enables operando observation of the detailed formation process of pores in Ti-6Al-4V caused by a critical instability at the keyhole tip. We found that the boundary of the keyhole porosity regime in power-velocity space is sharp and smooth, varying only slightly between the bare plate and powder bed. The critical keyhole instability generates acoustic waves in the melt pool that provide additional yet vital driving force for the pores near the keyhole tip to move away from the keyhole and become trapped as defects.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Instability of super-entropic black holes in extended thermodynamics

The charged black hole of Bañados, Teitelbiom and Zanelli is studied in extended gravitational thermodynamics where there is a dynamical pressure and volume. It is a simple example of a super-entropic black hole, violating the reverse isoperimetric inequality. It is proven that this property implies that its specific heat at constant volume is negative, signaling a new kind of fundamental instability for black holes. It is conjectured that this instability is present for other super-entropic black holes, and this is demonstrated numerically for a large family of known solutions.

Astronomy & Astrophysics↗
DOE OSTI2020

Fresnel zone plate development for x-ray radiography of hydrodynamic instabilities at the National Ignition Facility

The study of Rayleigh–Taylor (RT) and Richtmyer–Meshkov (RM) instabilities in a planar geometry at high energy densities at the National Ignition Facility (NIF) requires high spatial resolution imaging. We demonstrate the potential of Fresnel zone plates (FZPs) to achieve resolution that would unlock such studies. FZPs are circular aperiodic gratings that use diffraction to focus x rays and produce an image with high spatial resolution. Taking into account the NIF’s challenging environment, we have designed a specific array of five FZPs for a zinc backlighter to take a radiograph of a target with 9 keV x rays. We measured a mean resolution for the FZP of 1.9µm±0.5µm and a ±1mm depth of focus at an x-ray calibration facility as well as a 2.3µm±0.4µm resolution on a resolution wire mesh shot on the NIF. We also performed an in-depth analysis of the image quality to assess the capability to resolve the small features present in RT and RM instabilities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Instabilities driven by the fundamental crabbing mode

The Electron Ion Collider (EIC) requires crab cavities to correct for crossing angle effects. These cavities produce a time varying horizontal kick that makes the collision head on in the center of mass frame of the bunches. This results in a luminosity that is very close to the the luminosity obtained without a crossing angle. Producing the kick requires a transverse RF field. This field requires a superconducting resonator and reasonable power levels require loaded quality factors of order a million. This results is a very large transverse impedance for the crabbing mode. The horizontal beta function is large and this, coupled with the large transverse impedance of the resonator can lead to strong instabilities. In the first section of the paper a simple model is used to describe the situation without feedback. There are large ranges of tune leading to strong instabilities in both the electron and hadron storage rings of the EIC. These estimates are confirmed with simulations. In the second section, RF feedback is used to reduce the apparent impedance of the crabbing mode. Simulating the actual feedback would require both a significant rewrite of the tracking code and a significant reduction in computational speed. Instead, the apparent impedance is fitted using one pole filters, which allows use of the existing simulation code. In the third section a transverse damping system is outlined.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Exploring superconductivity at the edge of magnetic or structural instabilities

Modern research of condensed matters devotes in understanding how properties of complex solids are determined by their structural and electronic degrees of freedom. In the last decade, the discovery of Fe-based high-temperature superconductors as well as the discovery of protected surface state in bulk materials arising from the non-trivial topological electronic structures have brought revolutionary breakthroughs, advancing our understanding of the interplay of structure, band topology, spin and charge degrees of freedom to a new level. Despite the exciting progresses, significant materials challenges remain. To address such challenges, our research funded by this award focuses on the design, synthesis and property characterization of two types of quantum materials. One is quasi-two-dimensional materials with structural/magnetic instability, the other is topological materials, especially the “ideal” ones where only minimum non-trivial bands exist at the Fermi level. The objective of our research is to design quantum materials that lie at the edge of structural/magnetic instabilities as well as the ones with non-trivial band topology, aiming at the discovery of quantum materials with emergent phenomena and the in-depth understanding of the entanglement of band topology and various degrees of freedoms through thermodynamic, transport, X-ray, and neutron measurements.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Identifying Indicators of Sociopolitical Instability in Iran [Slides]

Introduction: Socio Political Instability - Defined as “the likelihood that a government will be overthrown by unconstitutional or violent means, including social unrest, violence, hostility, or terrorism." Global protests and demonstrations have increased 244% in the last decades. Better understanding of the drivers and motivations behind this increasing instability may help inform preventative or de-escalation measures. Identifying measurable indicators and drivers of sociopolitical unrest is the first step in accomplishing this task and may aid with event forecasting through modeling.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗