Search NASA⌕ Search

SEARCH · Search NASA

Results for “LANGMUIR PROBE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Measurements of plasma parameters in a simulated thermionic converter

Cesium-filled thermionic energy converters are examined as candidate electrical energy sources in spacecraft requiring tens to hundreds of kilowatts of electric power. The high operating temperatures necessary for a large specific power and high efficiency inevitably impose stringent constraints on the converter fabrication to achieve the desired reliability of the power system. The converter physics for reducing operating temperatures and cesium plasma losses are studied to achieve high reliability without sacrificing the power performance of the converters. Various cesium parameters which affect the converter performance are: (1) electron temperatures, (2) plasma ion densities, and (3) electric potential profiles. These were investigated using a Langmuir probe in a simulated converter. The parameters were measured in different cesium discharge modes.

Shimada, K.↗

Effects of the hollow cathode discharge on throttled ion thruster performance.

An experimental study performed on a 20 cm electron bombardment thruster shows substantial improvements in throttled performance can be achieved if cathode discharge region diameter and length, cathode flow rate and baffle aperture area are reduced simultaneously. This improvement is related to a thruster operating mode in which arc current does not vary significantly with arc voltage. In this mode it is possible to operate the thruster at a high arc voltage and a correspondingly high primary electron energy without the penalty of a prohibitively high arc power. Langmuir probe data indicate the arc current is limited by the cathode region plasma potential and electron density which are both nearly invariant with arc voltage.

Wilbur, P. J.↗

OGO-F-02 data analysis

The OGO-VI satellite, which was launched on June 5, 1969 carried a complement of twenty-six experiments. One of those instruments, the F-02 package, was a cylindrical Langmuir probe experiment whose primary purpose was to measure ionospheric electron temperatures and densities. This report briefly describes the F-02 experiment itself, outlines the computer programs developed to analyze the raw data, and gives a summary of the scientific information obtained, with the aid of this experiment.

Nagy, A. F.↗

Momentum transfer interaction of a laser-produced plasma with a low-pressure background.

The expansion of a laser-produced metallic plasma into a photoionized hydrogen background has been experimentally studied. Langmuir probe and microwave diagnostics have detected an interaction front which decelerates with a dependence on background density and time consistent with a momentum coupling between the laser plasma and the ionized fraction of the background. An ion percursor has also been observed. Calculations of scattering cross sections indicate that multiple-encounter Coulomb scattering will dominate collisional momentum transfer. The leading edge of the laser plasma contains multiply charged ions of charge state z greater than or equal to 5, and collisional effects appear adequate to explain the principal features of the momentum coupling. The ion precursor may have a collisionless origin.

Koopman, D. W.↗

Comparison of Te and Ti from Ogo 6 and from various incoherent scatter radars.

Langmuir probe and retarding potential analyzer (RPA) data on the electron and ion temperatures Te and Ti obtained from Ogo 6 are compared with Te and Ti values obtained from the incoherent scatter network. The satellite to radar temperature ratio TeS/TeR is 1.15 on the average for these comparisons. This discrepancy is larger than the uncertainties usually placed on the probe and radar Te values. The ion temperature ratio TiS/TiR approximately 1.0, independent of the particular radar examined. This comparison serves as an intercalibration of the incoherent scatter network.

Mcclure, J. P.↗

Antenna admittance determination of electron density.

A circular-aperture flush-mounted antenna for which a theoretical description of the antenna-plasma interaction has been developed was used to obtain a comparison between theoretical and experimental antenna admittance in the presence of ionized boundary layers of low-collision frequency. The antenna was located in a flat-plate model which was in turn located in the expanding-flow environment of a reflected-shock tunnel. The electron-temperature and electron-density distributions in the plate boundary layer at the antenna location were independently measured using voltage-swept thin-wire Langmuir probes for one of the test conditions. The antenna admittance was measured using a four-probe microwave reflectometer and these measured values were found to be in good agreement with those predicted from the theory. Measurements were also performed with another type of circular-aperture antenna which did not satisfy all of the constraints of the theoretical model, although good agreement was obtained between the calculations and the experimental results.

Dunn, M. G.↗

Thermal electron energy distribution measurements in the ionosphere.

A recoverable payload instrumented for twilight airglow studies was launched by an Aerobee 150 from the White Sands Test Range on Feb. 8, 1971 at 13.56 UT. The payload included a low energy electron spectrometer (HARP) and a cylindrical Langmuir probe. The HARP electron spectrometer is a new device designed to make high resolution differential electron flux measurements. Measurements of ionospheric electron energy distribution in the range from about 0.2 to 4.0 eV are presented.

Hays, P. B.↗

UCB current detector experiment on Swedish auroral payloads

A split Langmuir probe has been developed to make in situ measurements of ionospheric current density and plasma bulk flow. The probe consists of two conducting elements that are separated by a thin insulator that shield each other over a 2 pi solid angle, and that are simultaneously swept from negative to positive with respect to the plasma. By measuring the current to each plate and the difference current between plates, information is obtained on the plasma's current density, bulk flow, electron temperature, and density. The instrument was successfully flown twice on sounding rockets into auroral events. Measurement data indicate that the total auroral current configuration is composed of several alternating east and west electrojets associated with several alternating up and down Birkeland currents.

Mozer, F.↗

Influence of ablation impurities on blunt body re-entry ionization

Electron density profiles which include the effect of an ablated sodium impurity were computed for the boundary layer on a blunt-nosed body re-entering the atmosphere at 7.62 km/sec. Profiles are computed from the nose to a distance of four diameters along the RAM C-payload. A finite-difference, laminar, nonequilibrium chemistry boundary-layer program was used. Comparison of theory with S-band diagnostic antenna results, electron concentration deduced from X- and C-band attenuation data, and Langmuir probe data at several different aft body locations show that agreement is good at high altitude. At the lower altitudes there is disagreement between theory and S-band antenna data where the apparent discrepancy is attributed to the three-body recombination rate constant used for deionization of sodium coupled with the effect of angle of attack.

Schexnayder, C. J., Jr.↗

Spoke wavenumbers and mode transitions in the NASA Lewis bumpy torus

Waveforms of fluctuations of plasma potential, resulting from rotating electron and ion charge concentrations, were observed in a bumpy torus. Since these fluctuations were thought to be spoke rotations in the direction of the ExB drift, measuring the direction of spoke rotation should determine the direction of the electric fields over much of the plasma surface. A Langmuir probe was inserted into the plasma to measure the floating potential of the plasma, hence the direction of the electric field could be checked another way.

Gerdin, G. A.↗

Study of the performance of antennas in magnetized plasmas

The antenna studies were performed in a large magnetized plasma source, a schematic drawing of which is shown. The plasma diagnostics consist of a 70 GHz (4 mm) microwave interferometer for density measurements and of various Langmuir probes for spatially resolved measurements of t sub e, n sub e and the shape of the electron distribution function. All diagnostic data are time-resolved by sample-and-hold techniques so as to yield information about the plasma build-up, the steady-state discharge, and the plasma decay in the afterglow. Whistler waves are excited and detected with various antennas which are inserted into the center of the plasma column through one axial and two orthogonal radial ports. The antennas were tested for their proper dipole response and then calibrated in a known field geometry in air. For the electric dipole, a parallel plate capacitor field was used; the magnetic loop is calibrated in the near-zone field of a long linear conductor of known radio frequency current distribution. Results are presented and discussed.

Stenzel, R. L.↗

Spoke wavenumbers and mode transitions in NASA-Lewis bumpy torus

Waveforms of fluctuations of plasma potential, resulting from rotating electron and ion charge concentrations, have been observed in the Lewis bumpy torus. Since these fluctuations are thought to be spoke rotations in the direction of the E x B drift, measuring the direction of spoke rotation should determine the direction of the electric fields over much of the plasma surface. Since inward pointing electric fields should enhance confinement of the hot ions in this device, knowledge of the direction of the spoke rotation could give valuable information on the mechanism of plasma confinement and radial transport. A Langmuir probe was inserted into the plasma to measure the floating potential of the plasma; hence the direction of the electric field could be checked another way.

Gerdin, G. A.↗

Electron temperatures in the wake of an ionospheric satellite

We present measurements of electron temperature (Te) made by a retarding potential analyzer and a Langmuir probe (both flush-mounted on the spin-stabilized satellite Explorer 31) to investigate the variation of Te around the satellite. Most of the time there is a Te variation, which repeats for given ionospheric conditions. The variation is strongly controlled by the angle between the velocity vector and the probe normal, Te usually being enhanced in the near wake of the satellite. Magnetic field control of Te, if it is present, is hidden by the stronger velocity vector control. Our results indicate that the magnitude of the Te enhancement in the wake does not depend on the average ion mass (M), although the electron density depletion in the wake is strongly correlated with M.

Troy, B. E., Jr.↗

Dissociative recombination source for O I /1D/ atoms

A study of the nighttime dissociative recombination production of O(1D) is reported. The data were gathered by a rocket payload carrying an ion mass spectrometer, Langmuir probe, retarding potential analyzer, and 6300-A photometer. The specific recombination rate to produce O(1D) atoms is deduced to be (2.8 + or - 1.0) times 10 to the minus 8th cu cm per sec and is 30% of the total laboratory rate. The quenching rate at 250 km is 0.0044 + or - 0.0015 per sec.

Sharp, W. E.↗

A measurement of perpendicular current density in an aurora

A Nike Tomahawk sounding rocket was launched into a 400-gamma auroral substorm from Esrange, Kiruna, Sweden. The rocket instrumentation included a split Langmuir-probe plasma-velocity detector and a double-probe electric-field detector. Above 140-km altitude, the electric field deduced from the ion-flow velocity measurement and the electric field measured by the double probe agree to an accuracy within the uncertainties of the two measurements. The difference between the two measurements at altitudes below 140 km provides an in situ measurement of current density and conductivity. Alternatively, if values for the conductivity are assumed, the neutral-wind velocity can be deduced. The height-integrated current was 0.11 A/m flowing at an azimuth angle of 276 deg. The neutral winds were strong, exhibited substantial altitude variation in the east-west component, and were predominantly southward.

Bering, E. A.↗