Search NASA⌕ Search

SEARCH · Search NASA

Results for “Large-scale data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Development of a facility for large-scale testing of multistory buildings

Current experimental research pertaining to response of structures subjected to lateral loads such as strong winds or earthquake motions is limited to either tests of single structural components or small scale multistory structures. The feasibility of developing a facility where large scale multistory structures could be loaded to failure is discussed. The test facility would consist of a series of hydraulic actuators mounted on reaction frames currently in use at the Marshall Space Flight Center for structural testing of spacecraft components. The actuators would be controlled from signals computed by an on-line analysis of measured data. This method of loading could be used to simulate inertial forces resisted by a structure behaving in the non linear range of response subjected to motion at the base or to impulses along the height as would occur during a strong earthquake or wind.

Abrams, D. P.↗
NASA NTRS1981

Numerical investigation of turbulent channel flow

Fully developed turbulent channel flow was simulated numerically at Reynolds number 13800, based on centerline velocity and channel halt width. The large-scale flow field was obtained by directly integrating the filtered, three dimensional, time dependent, Navier-Stokes equations. The small-scale field motions were simulated through an eddy viscosity model. The calculations were carried out on the ILLIAC IV computer with up to 516,096 grid points. The computed flow field was used to study the statistical properties of the flow as well as its time dependent features. The agreement of the computed mean velocity profile, turbulence statistics, and detailed flow structures with experimental data is good. The resolvable portion of the statistical correlations appearing in the Reynolds stress equations are calculated. Particular attention is given to the examination of the flow structure in the vicinity of the wall.

Moin, P.↗
NASA NTRS1980

Modification in drag of turbulent boundary layers resulting from manipulation of large-scale structures

The effects of placing a parallel-plate turbulence manipulator in a boundary layer are investigated by means of flow visualization and hot-wire measurements. The manipulator was found to be effective in inhibiting the intermittent large scale structure of the boundary layer, and the effect persists for at least 70 boundary-layer thicknesses downstream of the manipulator. With the removal of the large scale, there was an observed reduction in the streamwise turbulence intensity levels near the wall. The downstream distribution of the skin friction coefficient, determined from the stream wise change in fluid momentum, was also altered by the introduction of the manipulator. The data from both the visualization and hot wire studies are provided.

Corke, T. C.↗
NASA NTRS1981

Neutral winds and electric fields in the dust auroral oval. II - Theory and model

A two-dimensional numerical model of the thermosphere is applied to the auroral zone neutral wind, electric field, and plasma density data set, presented in an earlier paper. The model shows that the action of the Lorentz force can be responsible to a great extent for the large zonal velocities near the 150-km altitude. Model equations are described, an explanation of the use of the geophysical conditions is given, and model integrations are compared to the wind measurements. However, for the two-dimensional model to be effective, the atmosphere must not cross too many meridians of local time during the integration period, so that the background state should remain fairly uniform. It is concluded that the two-dimensional model cannot accurately explain the details of the wind profiles because of the three-dimensional character of the physical situation. Thus it is noted that the observed winds were part of a large-scale three-dimensional flow which is only weakly coupled to short-term variations in magnetospheric conditions.

Mikkelsen, I. S.↗
NASA NTRS1981

Thermal structure and dynamics of the Jovian atmosphere. I - The Great Red Spot

Temperatures and thermal winds over the Great Red Spot (GRS) are derived from Voyager IRIS data for atmospheric pressures between 3 and 500 mbar. A cold tropopause implies a decrease in anticyclonic vorticity with height above 500 mbar through the lower stratosphere. Observations at 5 microns indicate that there is little emission from the GRS itself, although there is enhanced emission from a ring around it. The behavior of the tropopause and 5 micron temperatures are considered to be results of circulation which rises within the GRS and subsides in the area around it. Results are discussed in the context of several theoretical models of the GRS, and latent heat release as an energy source is considered. Dynamical scalings based on an axisymmetric frictionally controlled vortex indicate that the large-scale dynamics of the GRS are linear, as opposed to those of a tropical cyclone which are nonlinear.

Flasar, F. M.↗
NASA NTRS1981

Large-scale wind tunnel tests of a sting-supported V/STOL fighter model at high angles of attack

A new sting model support has been developed for the NASA/Ames 40- by 80-Foot Wind Tunnel. This addition to the facility permits testing of relatively large models to large angles of attack or angles of yaw depending on model orientation. An initial test on the sting is described. This test used a 0.4-scale powered V/STOL model designed for testing at angles of attack to 90 deg and greater. A method for correcting wake blockage was developed and applied to the force and moment data. Samples of this data and results of surface-pressure measurements are presented.

Stoll, F.↗
NASA NTRS1981

Large-scale variations in observed Antarctic Sea ice extent and associated atmospheric circulation

The 1974 Antarctic large scale sea ice extent is studied from data from Nimbus 2 and 5 and temperature and sea level pressure fields from the Australian Meteorological Data Set. Electrically Scanning Microwave Radiometer data were three-day averaged and compared with 1000 mbar atmospheric pressure and sea level pressure data, also in three-day averages. Each three-day period was subjected to a Fourier analysis and included the mean latitude of the ice extent and the phases and percent variances in terms of the first six Fourier harmonics. Centers of low pressure were found to be generally east of regions which displayed rapid ice growth, and winds acted to extend the ice equatorward. An atmospheric response was also noted as caused by the changing ice cover.

Cavalieri, D. J.↗
NASA NTRS1981

Magnetic fields and charged particles around major planets and their satellites

It is noted that whereas Jupiter and Saturn have magnetospheres whose large-scale structure can be understood by analogy with earth, the ways in which the magnetospheres differ are of great interest. At earth, large-scale processes are dominated by convective flows of plasma driven by the solar wind. At Jupiter, centrifugal effects that are driven by planetary rotation are critical. Magnetic particle sources include not only the ionosphere and solar wind (as at earth) but also satellites and rings. The internal planetary magnetic moments controlling the scale of the magnetosphere differ by orders of magnitude between Jupiter and earth. It is pointed out that where the magnetic moments have been modeled from spacecraft data, the restricted spatial sampling has biased the results and limited confidence in details of the models. Voyager data suggest that Io may itself be magnetized and surrounded by an entirely unfamiliar type of magnetosphere.

Kivelson, M. G.↗
NASA NTRS1983

Corotating pressure waves without streams in the solar wind

Voyager 1 and 2 magnetic field and plasma data are presented which demonstrate the existence of large scale, corotating, non-linear pressure waves between 2 AU and 4 AU that are not accompanied by fast streams. The pressure waves are presumed to be generated by corotating streams near the Sun. For two of the three pressure waves that are discussed, the absence of a stream is probably a real, physical effect, viz., a consequence of deceleration of the stream by the associated compression wave. For the third pressure wave, the apparent absence of a stream may be a geometrical effect; it is likely that the stream was at latitudes just above those of the spacecraft, while the associated shocks and compression wave extended over a broader range of latitudes so that they could be observed by the spacecraft. It is suggested that the development of large-scale non-linear pressure waves at the expense of the kinetic energy of streams produces a qualitative change in the solar wind in the outer heliosphere. Within a few AU the quasi-stationary solar wind structure is determined by corotating streams whose structure is determined by the boundary conditions near the Sun.

Burlaga, L. F.↗
NASA NTRS1982

The development and verification of shuttle orbiter random vibration test requirements

The unique space shuttle vehicle size, weight, and configuration gave rise to problems in determining vibration requirements and in verifying structural integrity for anticipated mission environments. The applications of large-scale vibration testing played a prominent part in qualifying the shuttle for its intended missions. Severe vibration excitation from rocket engines, aerodynamic noise, and onboard equipment are expected on each shuttle flight. Scale-model wind tunnel and rocket firing tests, as well as full-size rocket engine tests were relied on to define the random forcing functions. The determination of structural response to these environments is described as well as evaluations of measured flight data and comparison with predicted design and test criteria.

Coody, M. C.↗
NASA NTRS1983

Dynamical evolution of interplanetary magnetic fields and flows between 0.3 AU and 8.5 AU - Entrainment

An analysis is presented of the radial evolution of interplanetary flows and associated magnetic fields between 0.3 AU and 8.5 AU using data from Helios 1 and B Voyager 1, respectively. The results indicate that in moving to 8 AU the largest corotating streams swept up the slower flows and shocks into a relatively thin region in which they coalesced to form a single large-amplitude compression. As a result of this process, referred to as entrainment, memory of the sources and flow configurations near the sun is lost, while small-scale features are erased as the flows move outward and energy is transferred from small scales to large scales.It is concluded that in the outer solar system the structure of the solar wind may be dominated by large scale pressure waves separated by several AU, while beyond several AU most of the compression waves are no longer driven by streams, and the compression waves expand freely. At large distances (greater than 25 AU) these compression waves will have interacted extensively with one another producing another state of the solar wind, with fewer large-scale nonuniformities and more small-scale nonuniformities.

Burlaga, L. F.↗
NASA NTRS1983

Dependence of radio emission in large H alpha flares 1967-1970 upon the orientation of the local solar magnetic field

Published data on ionizing radiation (as reflected in sudden ionospheric disturbances), H-alpha importance, 10-cm flux, dynamic spectrum, and 200-MHz flux are analyzed for a group of 84 solar flares (from 1967 to 1970) classified by Pudovkin and Chertkov (1976). The group consists of 29 flares with southern orientation of the 100,000-km-scale overlying magnetic field, 32 with northern orientation, and 23 with indeterminate orientation; all have H-alpha importance greater than about 2. Slightly greater X-ray and optical emissions, but one-order-of-magnitude greater prompt 200-MHz and 10-cm fluxes are found in southern as compared to northern-oriented flares. It is inferred that the amount of electromagnetic flare energy radiated promptly from the corona, as compared with that radiated from the chromosphere, was significantly affectly by the orientation of the overlying large-scale magnetic field during the period of observation. This trend is shown to be consistent despite some periodic variation.

Roelof, E. C.↗
NASA NTRS1983

Radio and X-ray observations of the radio halo source in A1367

Radio and X-ray observations of the 'radio halo' in A1367 are presented. The radio spectral index distribution is derived combining data at 610 and 1415 MHz taken with the Westerbork Synthesis Radio Telescope (WSRT). A high-resolution Very Large Array (VLA) map allows us to discriminate between the extended cluster emission and a triple radio source associated with a background stellar object (most probably a QSO) which appears projected onto it. X-ray observations taken with the high-resolution imager on board the Einstein satellite reveal an X-ray source associated with this background object. A second weak X-ray enhancement is found projected onto the extended radio component. Inverse Compton scattering of the synchrotron-emitting particles provides a possible interpretation of such a source. The presence of large-scale magnetic fields and particle acceleration due to the turbulent motion of galaxies through the intergalactic medium is discussed in relationship to the observed peculiarities of the galaxies found in this region.

Gavazzi, G.↗
NASA NTRS1983

Corotating pressure waves without fast streams in the solar wind

Voyager 1 and 2 magnetic field and plasma data are presented which demonstrate the existence of large scale, corotating, non-linear pressure waves between 2 AU and 4 AU that are not accompanied by fast streams. The pressure waves are presumed to be generated by corotating streams near the sun. For two of the three pressure waves that are discussed, the absence of a stream is probably a real, physical effect, viz., a consequence of deceleration of the stream by the associated compression wave. For the third pressure wave, the apparent absence of a stream may be a geometrical effect; it is likely that the stream was at latitudes just above those of the spacecraft, while the associated shocks and compression wave extended over a broader range of latitudes so that they could be observed by the spacecraft. It is suggested that the development of large-scale non-linear pressure waves at the expense of the kinetic energy of streams produces a qualitative change in the solar wind in the outer heliosphere. Within a few AU the quasi-stationary solar wind structure is determined by corotating streams whose structure is determined by the boundary conditions near the sun. Previously announced in STAR as N83-19694

Burlaga, L. F.↗
NASA NTRS1983

Large-scale motions of the tropics in observations and theory

Charney (1963) characterized the tropical atmosphere in terms of a superposition of large regions of nearly nondivergent circulations containing local subdomains, or 'fissures', of active convection and latent heating. Tropical wave evolution is then appropriately treated in terms of quasi-rotational waves, to the extent that the divergent contribution is small. An attempt is presently made to interpret recent tropical analyses in the aforementioned terms, suggesting extensions of the simplest quasi-rotational model capable of reconciling observations and theory. First GARP Global Experiment (FGGE) observations suggest that strongly divergent local tropical circulations are forced by latent heating and produce important direct modifications of the total wind field; after describing the extent to which the resulting field consists of divergent and rotational components in different analyses of the FGGE data, independent supporting documentation of the results in terms of heating estimates and rainfall observations are given.

Paegle, J.↗
NASA NTRS1947

An Investigation of the Low-speed Stability and Control Characteristics of Swept-forward and Swept-back Wing in the Ames 40- by 80-foot Wind Tunnel

An investigation has been made at large scale of the characteristics of highly swept wings. Data were obtained at several angles of sideslip on wings having angles of sweep of plus or minus 45 degrees, plus or minus 30 degrees, and 0 degrees. The airfoil sections of the wings varied from approximately NACA 0015 at the root to NACA 23009 at the tip. Each wing was investigated with flaps under flection, partial-span split flaps deflected 60 degrees, full-span split flaps defected 60 degrees and split-flap-type ailerons deflected plus or minus 15 degrees. Values of maximum lift were obtained at Reynolds numbers raging from 5.7 to 9.2 times 10 to the 6th power. In this report the summarized results are compared with the predictions made by use of the simplified theory for the effect of sweep and with existing small-scale data. The basic wind-tunnel results from which these summary data were taken are included in an appendix. The primary problems accompanying the use of weep as revealed by this investigation are the loss in maximum lift, the high effective dihedral, and the sharp reduction in lateral-control effectiveness. In general, simple theory enables good predictions to be made of the gross effects of sweep but further refinements are necessary to obtain the accuracy required for design purposes. In cases where comparisons can be made, the indications are that, as sweep increases, scale effects diminish and large-scale results approach small-scale results.

Mccormack, Gerald M↗
NASA NTRS1931

Large-scale aerodynamic characteristics of airfoils as tested in the variable density wind tunnel

In order to give the large-scale characteristics of a variety of airfoils in a form which will be of maximum value, both for airplane design and for the study of airfoil characteristics, a collection has been made of the results of airfoil tests made at full-scale values of the reynolds number in the variable density wind tunnel of the National Advisory Committee for Aeronautics. They have been corrected for tunnel wall interference and are presented not only in the conventional form but also in a form which facilitates the comparison of airfoils and from which corrections may be easily made to any aspect ratio. An example showing the method of correcting the results to a desired aspect ratio has been given for the convenience of designers. In addition, the data have been analyzed with a view to finding the variation of the aerodynamic characteristics of airfoils with their thickness and camber.

Jacobs, Eastman N↗
NASA NTRSDate not supplied

ARCTRON: A Rapid Experimental Proving Ground for TPS Experiments and Arcjet Technology Development

Innovation in high-enthalpy facilities is fundamentally limited by the cost and risk of experimentation. New concepts for plasma control, diagnostics, facility components, and plasma-material interaction often require repeated iterations that are impractical to perform in production arcjets. As a result, promising ideas may remain unexplored or reach operational facilities only after significant development effort. ARCTRON is being developed as a rapid experimental proving ground where new ideas in plasma science, arcjet engineering, diagnostics, and material response can be conceived, tested, and quantitatively evaluated before transition to large-scale facilities. The platform combines radio-frequency (RF) and DC arc plasma generation, externally applied magnetic fields, configurable gas composition, reduced-pressure operation, laser heating, electrical biasing, and modular diagnostic access. These capabilities permit the plasma source, applied forcing, test article, and measurement configuration to be modified independently, allowing individual physical mechanisms to be isolated more readily than in a traditional test environment. One class of investigations addresses fundamental plasma-surface interaction physics. Conventional material tests often expose a specimen simultaneously to convective heating, reactive species, pressure, shear, radiation, and surface-current effects. The resulting material response may be measured accurately, while the contribution of each mechanism remains difficult to identify. ARCTRON is designed to vary these effects selectively. Plasma chemistry can be changed independently through configurable gas mixtures; magnetic fields and electrical biasing can modify charged-particle transport; laser heating can provide a non-plasma thermal input; and pressure, flow, and discharge mode can be varied over a broad operating space. This enables controlled tests of hypotheses involving surface catalycity, reactive-species transport, plasma-assisted oxidation, electromagnetic effects, shear, and the relative contributions of thermal and chemical loading. A second class of investigations enabled by this approach concerns the engineering of high-enthalpy facilities themselves. Arc-heated facilities are limited by electrode erosion, unstable arc attachment, localized heating, and damage to nozzles and other plasma-facing components. ARCTRON provides a lower-cost environment for testing concepts intended to mitigate these limitations. Candidate investigations include the use of applied magnetic fields to alter current paths and reduce plasma interaction with nozzle walls, ExB forcing to introduce controlled plasma rotation, magnetic or geometric approaches for distributing arc attachment, and alternative electrode or discharge configurations intended to reduce erosion and improve stability. Because the platform is reconfigurable, these concepts can be evaluated through repeated design--build--test cycles before they are considered for implementation in operational facilities. The platform also supports the development and validation of diagnostics that may be difficult to introduce initially into a large arcjet. Current and planned measurements include spatially resolved optical emission spectroscopy, electrostatic probes, fast imaging, pyrometry, calorimetry, laser-induced fluorescence, and absorption spectroscopy. These diagnostics are intended not merely to document a nominal operating condition, but to constrain the local plasma state and its relationship to component or material response. The modular facility geometry allows diagnostic concepts to be tested, calibrated, and compared under repeatable conditions before deployment in more demanding environments. ARCTRON is also supported by an integrated software suite. Automated control and data acquisition allow discharge parameters, gas composition, magnetic fields, diagnostic timing, and test configuration to be recorded as part of each experiment (STARDAC - Software for Testing, Analysis, Research Data, and Control). The Backend for Experiment Analysis, Storage, and Traceability (BEAST) is a database that provides the infrastructure needed to associate heterogeneous measurements with facility configuration, specimen identity, calibration state, geometry, and analysis provenance. This backend is particularly important for exploratory campaigns, in which many related configurations may be tested, and the value of an individual experiment depends on its connection to earlier and subsequent iterations. Complementary analysis capabilities, including computer-vision-based transient response measurements (arcjetCV), three-dimensional surface reconstruction (STARSCAN), and model-based Bayesian inference (SHIELD), and tomography data analysis (TOMATO, PuMA) can be incorporated when required by a specific hypothesis without becoming the focus of every campaign. The central objective of ARCTRON is therefore not to maximize heat flux or reproduce a complete flight environment. Its purpose is to reduce the cost and time required to ask consequential questions about plasma behavior, plasma-facing materials, diagnostics, and arcjet technology. By providing a controlled environment for rapid reconfiguration, mechanism isolation, quantitative measurement, and iterative engineering, ARCTRON can help mature concepts that would otherwise remain too speculative or too risky for evaluation in production facilities. The resulting knowledge can then guide the design of material models, focus test objectives in larger arcjets, reduce facility-development risk, and improve the physical basis of high-enthalpy ground testing. This work will present the ARCTRON architecture, operating modes, diagnostic suite, and digital experimental workflow. Initial experimental results from the first integrated operation of the facility will be presented, including flow characterization, power limitations, and deployment of the initial diagnostic suite. Ongoing development efforts aimed at catalycity characterization, magnetic plasma control, and advanced optical diagnostics will also be discussed, illustrating how the platform supports rapid iteration from concept to experiment.

experimental diagnostics↗