SEARCH · Search NASA

Results for “Linear approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Methods for Measuring and Computing the Reference Temperature in Newton’s Law of Cooling for External Flows

Newton’s law of cooling requires a reference temperature (𝑇 𝑟𝑒𝑓 ) to define the heat-transfer coefficient (ℎ). For external flows with multiple temperatures in the freestream, obtaining 𝑇 𝑟𝑒𝑓 is a challenge. One widely used method, referred to as the adiabatic-wall (AW) method, obtains 𝑇 𝑟𝑒𝑓 by requiring the surface of the solid exposed to convective heat transfer to be adiabatic. Another widely used method, referred to as the linear-extrapolation (LE) method, obtains 𝑇 𝑟𝑒𝑓 by measuring/computing the heat flux ($𝑞^{′′}_𝑠$) on the solid surface at two different surface temperatures (𝑇 𝑠 ) and then linearly extrapolating to $𝑞^{′′}_𝑠$ = 0. A third recently developed method, referred to as the state-space (SS) method, obtains 𝑇 𝑟𝑒𝑓 by probing the temperature space between the highest and lowest in the flow to account for the effects of 𝑇 𝑠 or $𝑞^{′′}_𝑠$ on 𝑇 𝑟𝑒𝑓 . This study examines the foundation and accuracy of these methods via a test problem involving film cooling of a flat plate where $𝑞^{′′}_𝑠$ switches signs on the plate’s surface. Results obtained show that only the SS method could guarantee a unique and physically meaningful 𝑇 𝑟𝑒𝑓 where 𝑇 𝑠 =𝑇 𝑟𝑒𝑓 on a nonadiabatic surface $𝑞^{′′}_𝑠$ = 0. The AW and LE methods both assume 𝑇 𝑟𝑒𝑓 to be independent of 𝑇 𝑠 , which the SS method shows to be incorrect. Though this study also showed the adiabatic-wall temperature, 𝑇 𝐴𝑊 , to be a good approximation of 𝑇 𝑟𝑒𝑓 (<10% relative error), huge errors can occur in ℎ about the solid surface where |𝑇 𝑠 −𝑇 𝐴𝑊 | is near zero because where 𝑇 𝑠 =𝑇 𝐴𝑊 , $𝑞^{′′}_𝑠$ ≠ 0.

Newton's law of cooling↗

DOE OSTI2024

A Particle-in-Cell Method for Plasmas with a Generalized Momentum Formulation, Part II: Enforcing the Lorenz Gauge Condition

In a previous paper Christlieb et al. (A particle-in-cell method for plasmas with a generalized momentum formulation, part I: Model formulation, 2024), we developed a new particle-in-cell (PIC) method for the relativistic Vlasov–Maxwell system in which the electromagnetic fields and the equations of motion for the particles were cast in terms of scalar and vector potentials through a Hamiltonian formulation. This new method evolved the potentials under the Lorenz gauge using integral equation methods. New methods to construct spatial derivatives of the potentials that converge at the same rates as the fields were also presented. The new particle method was compared against standard explicit discretizations, including the well-known FDTD-PIC method, for a range of applications involving sheaths and particle beams. Here, this paper extends this new class of methods by focusing on the enforcement the Lorenz gauge condition in both exact and approximate forms using co-located meshes. A time-consistency property of the proposed field solver for the vector potential form of Maxwell’s equations is established, which is shown to preserve the equivalence between the semi-discrete Lorenz gauge condition and the analogous semi-discrete continuity equation. Using this property, we present three methods to enforce a semi-discrete gauge condition. The first method introduces an update for the continuity equation that is consistent with the discretization of the Lorenz gauge condition. Both the finite difference and spectral implementations satisfy this discrete gauge condition to machine precision. The second approach we propose enforces a semi-discrete continuity equation using the boundary integral solution to the field equations. The potential benefit of this approach is that it eliminates spatial derivatives that appear on the particle data, namely the current density, which is often calculated by linear combinations of low-order spline basis functions. This method is ideally suited to boundary integral equation methods that invert multi-dimensional operators without dimensional splitting techniques and will be the subject of future work. The third approach introduces a gauge correcting method that makes direct use of the gauge condition to modify the scalar potential and uses local maps for both the charge and current densities. This results in a gauge error, as the maps do not enforce the continuity equation. The vector potential coming from the current density is taken to be exact, and using the Lorenz gauge, we compute a correction to the scalar potential that makes the two potentials satisfy the gauge condition. This method also enforces the gauge condition to machine precision. We demonstrate two of the proposed methods in the context of periodic domains. Problems defined on bounded domains, including those with complex geometric features remain an ongoing effort. However, this work shows that it is possible to design computationally efficient methods that can effectively enforce the Lorenz gauge condition in a non-staggered PIC formulation.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2024

Reactive Modified Epoxy Resin and Its Miscible Blends Based on Recycled Oligomers from Solvolysis

Chemical depolymerization of fully cured epoxy resin with 20% reactive modifier was successfully performed via a solvent-assisted solvolysis process into low molecular weight recyclable oligomers (RO) at 240 °C in a pressure vessel at 650 psi for 4 h. The thermoset epoxy resin was depolymerized into transparent brown viscous fluid with a higher viscosity than the uncured epoxy resin with approximately 93% yield. Different concentrations of the RO were homogeneously mixed with the pure epoxy resin, and their curing kinetics, viscosity, FTIR, mechanical properties, DMA, and cross-link density were investigated. The curing kinetics of the pure reactive modified epoxy resin (baseline) and its mixtures with RO of different concentrations were investigated under both isothermal and nonisothermal conditions using small amplitude oscillatory shear flow. The elastic and viscous moduli (G′ and G″), complex viscosity (η*), and tan δ values were evaluated at different curing times and temperatures. The G′, G″, and η* increased dramatically, while tan δ decreased strongly by several orders of magnitude at the gel point. The zero-shear viscosity (η 0 ) was determined from the angular frequency dependent on η* based on the Cross model for different blend compositions in the liquid state before curing. The composition dependence of η 0 showed a positive deviation from the linear mixing rule and was well described by the Lecyar model. Here, the apparent activation energy of curing (E a ) was also evaluated according to the Arrhenius equation and was found to be 46 ± 2 kJ/mol regardless of the different contents of RO. For all blends up to 40 wt % RO, only one tan δ peak systematically shifting to lower temperatures with increasing content of RO was observed in the DMA measurements, indicating that the epoxy resin and the RO are miscible with up to 40 wt % RO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

JIMWLK on a quantum computer

We propose a method for solving the Jalilian-Marian-Iancu-McLerran-Weigert-Leonidov-Kovner (JIMWLK) evolution equation on quantum computers. Our approach exploits the reformulation of the JIMWLK equation as a Lindblad master equation governing the rapidity evolution of the hadronic density matrix, as established in prior work. To render the problem tractable for quantum simulation, we introduce several approximations: the two-dimensional transverse plane is reduced to a one-dimensional radial lattice by assuming azimuthal symmetry of the jump operators; the gauge group is restricted to SU(2); and the infinite Wilson lines of the JIMWLK equation are replaced by finite Wilson links along the light-cone direction. The resulting bosonic Hilbert space is truncated using the electric field basis familiar from Hamiltonian lattice gauge theory, with states restricted to angular momenta 𝑗 ≤ 𝑗 max . We derive the matrix elements of the JIMWLK Lindblad jump operators in this basis. As a benchmark, we demonstrate rapid convergence of the fundamental dipole expectation value with 𝑗 max for both pure and mixed Gaussian initial density matrices. For the simplest truncation, 𝑗 max =1/2, we implement the Lindblad evolution using a quantum simulation algorithm verified with the Qiskit statevector simulator by decomposing the non-unitary evolution operator into a linear combination of unitaries. This work establishes a concrete pathway toward quantum simulation of high-energy quantum chromodynamics evolution equations, with direct relevance to the physics program of the Electron-Ion Collider.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2025

Requirements on the gain calibration for LiteBIRD polarisation data with blind component separation

The detection of primordial B modes of the cosmic microwave background (CMB) could provide information about the early stages of the Universe's evolution. The faintness of this signal requires exquisite calibration accuracy and control of instrumental systematic effects which otherwise could bias the measurements. In this work, we study the impact of an imperfect relative polarisation gain calibration on the recovered value of the tensor-to-scalar ratio r for the LiteBIRD experiment, through the application of the blind Needlet Internal Linear Combination (NILC) foreground-cleaning method. We derive requirements on the relative calibration accuracy of the overall polarisation gain (Δg ν ) for each LiteBIRD frequency channel. Our results show that minimum variance techniques, as NILC, are less sensitive to systematic gain calibration uncertainties compared to a parametric approach, if the latter is not equipped with a proper modelling of these instrumental effects. In this study, the most stringent requirements are found in the channels where the CMB signal is relatively brighter, with the tightest constraints at 166 GHz (Δg ν ≈ 0.16%). This differs from the outcome of an analogous analysis performed with a parametric method, where the tightest requirements are obtained for the foreground-dominated channels. Gain calibration uncertainties, corresponding to the derived requirements, are then simultaneously propagated into all frequency channels. By doing so, we find that the overall impact on estimated r is lower than the total gain systematic budget for LiteBIRD approximately by a factor 5, due to the correlations of the impacts of gain calibration uncertainties in different frequency channels. In order to decouple the systematic effect from the specific choice of the model, we derive the requirements assuming constant spectral parameters for the foreground emission. To assess the robustness of the obtained results against more realistic scenarios, we repeat the analysis assuming sky models of intermediate and high complexity. In these further cases, we adopt an optimised NILC pipeline, called the Multi-Clustering NILC (MC-NILC). We find that the impact of gain calibration uncertainties on r is lower than the LiteBIRD gain systematics budget for the intermediate-complexity sky model. For the high-complexity case, instead, it would be necessary to tighten the requirements by a factor 1.8.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2025

Validation of the DESI 2024 Lyα forest BAO analysis using synthetic datasets

The first year of data from the Dark Energy Spectroscopic Instrument (DESI) contains the largest set of Lyman-α (Lyα) forest spectra ever observed. This data, collected in the DESI Data Release 1 (DR1) sample, has been used to measure the Baryon Acoustic Oscillation (BAO) feature at redshift z = 2.33. In this work, we use a set of 150 synthetic realizations of DESI DR1 to validate the DESI 2024 Lyα forest BAO measurement presented in [1]. The synthetic data sets are based on Gaussian random fields using the log-normal approximation. We produce realistic synthetic DESI spectra that include all major contaminants affecting the Lyα forest. The synthetic data sets span a redshift range 1.8 < z < 3.8, and are analyzed using the same framework and pipeline used for the DESI 2024 Lyα forest BAO measurement. To measure BAO, we use both the Lyα auto-correlation and its cross-correlation with quasar positions. We use the mean of correlation functions from the set of DESI DR1 realizations to show that our model is able to recover unbiased measurements of the BAO position. We also fit each mock individually and study the population of BAO fits in order to validate BAO uncertainties and test our method for estimating the covariance matrix of the Lyα forest correlation functions. Finally, we discuss the implications of our results and identify the needs for the next generation of Lyα forest synthetic data sets, with the top priority being to simulate the effect of BAO broadening due to non-linear evolution.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2026

Non-resonant Raman optical activity from phase-space electronic structure theory

In order to model experimental non-resonant Raman optical activity, chemists must compute a host of second-order response tensors (e.g., the electric-dipole–magnetic-dipole polarizability) and their nuclear derivatives along a set of vibrational modes. While these response functions are almost always computed within a Born–Oppenheimer (BO) framework, here we provide a natural interpretation of the electric-dipole–magnetic-dipole polarizability within phase space electronic structure theory, a beyond-BO model whereby the electronic structure depends on nuclear momentum (P) in addition to nuclear position (R). By coupling to nuclear momentum, phase space electronic structure theory is able to capture the asymmetric response of the electronic properties to an external field, in so far as for a vibrating (non-stationary) molecule, $\frac{∂μ}{∂B}$≠$\frac{∂m}{∂F}$, where μ and m are the electrical linear and magnetic dipoles, and F and B are electric and magnetic fields. As an example, for a prototypical methyloxirane molecule, we show that phase space electronic structure theory is able to deliver a reasonably good match with experimental results in a manner that is formally invariant to gauge origin G 0 —provided that one uses a complete basis or, alternatively, gauge invariant atomic orbitals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Local reduced-order modeling for electrostatic plasmas by physics-informed solution manifold decomposition

Despite advancements in high-performance computing and modern numerical algorithms, computational cost remains prohibitive for multi-query kinetic plasma simulations. Here, in this work, we develop data-driven reduced-order models (ROMs) for collisionless electrostatic plasma dynamics, based on the kinetic Vlasov-Poisson equation. Our ROM approach projects the equation onto a linear subspace defined by the proper orthogonal decomposition (POD) modes. We introduce an efficient tensorial method to update the nonlinear term using a precomputed third-order tensor. We capture multiscale behavior with a minimal number of POD modes by decomposing the solution manifold into multiple time windows and creating temporally local ROMs. We consider two strategies for decomposition: one based on the physical time and the other based on the electric field energy. Applied to the 1D1V Vlasov–Poisson simulations, that is, prescribed E-field, Landau damping, and two-stream instability, we demonstrate that our ROMs accurately capture the total energy of the system both for parametric and time extrapolation cases. The temporally local ROMs are more efficient and accurate than the single ROM. In addition, in the two-stream instability case, we show that the energy-windowing reduced-order model (EW-ROM) is more efficient and accurate than the time-windowing reduced-order model (TW-ROM). With the tensorial approach, EW-ROM solves the equation approximately 90 times faster than Eulerian simulations while maintaining a maximum relative error of 7.5% for the training data and 11% for the testing data.

Electrostatic plasmas↗

DOE OSTI2024

On the prediction of pressure effects for the combination kinetics of two alkyl radicals with the geometric mean rule

Here, alkyl combination reactions, along with their reverse alkane unimolecular decomposition reactions, are widely present in pyrolysis and combustion systems. These reactions occur mainly at temperatures at which their rate coefficients depend on pressure, and only a few studies have explored this dependence for large size alkyls. The accurate calculation of these kinetic data is limited by the size of the alkyl fragments involved, since the theoretical methods used are computationally expensive. Therefore, little reliable data is available for the modeling of real fuels alkane decomposition kinetics. In this paper, we propose an alternative approach that allows an accurate estimation of pressure-dependent kinetic rates for the combination of long-chain alkyl radicals, based on tabulated reaction models. The rates of combination of linear alkyls radicals forming ethane to pentane were calculated using the CASPT2-F12/cc-pVDZ-F12 level within VRC-TST theory combined with master-equation simulations. The computed high-pressure limit rate coefficients showed that n-propyl could be a minimum-size representative structure for larger n-alkyl chain, but this approach fails to capture the pressure dependence of the reaction that remains size-dependent for larger alkyls. The Geometric Mean Rule (GMR), a simple rule that links the self and cross-reactions of three alkyl radicals, is used to address this issue. Our theoretical calculations show for the first time that the GMR applies not only at the high-pressure limit, but also for every pressure explored. The GMR is shown to be accurate, with a maximum 22 % deviation in the falloff region for the estimation of rates for small alkyl combinations. Using this method, we propose a tabulated reaction rate rule for the combination of alkyl radicals up to C5+C5. The use of computed rate coefficients with the GMR approximation opens ways to develop pressure-dependent reaction rate rules for large n-alkyl combinations, based on accurate and computationally expensive theoretical calculations on smaller alkyl fragments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Dynamics of the water-plasma interface in various discharge modes of atmospheric-pressure plasmas

This paper presents an experimental study of the dynamics of the water-plasma interface during the interaction high-voltage (HV) atmospheric pressure discharge with the water surface. Under the influence of the voltage applied to the pin type electrode, discharges are formed at the air layer between the sharp-tip HV electrode and deionized water. Three discharge regimes were identified from synchronized electrical waveforms and imaging: (i) a weak linear regime at 3–10.6 kV, (ii) a branching streamer regime at the maximum applied voltage of 12.6 kV, and (iii) a continuous arc-like regime occurring during the transition to lower voltage and higher current (e.g., U ≈ 3.2 kV, I ≈ 4.07 mA). High-speed shadowgraph images showed a symmetric interfacial cavity whose depth increased nonlinearly with voltage from h 0 ≈ 0.1 mm at 3 kV to h 0 ≈ 2.7 mm at 10.6 kV, reaching a maximum depth of h 0 ≈ 5.9 mm at 12.6 kV, while the cavity disappeared in the continuous-channel regime and was replaced by outward-propagating wave-like motion. The deformation of the water surface during the discharge-water interaction is governed by the balance between electric field forces, surface tension, gravitational forces, and electrohydrodynamic forces, whose relative contributions vary with the applied voltage. This effect was explained by quantitatively estimating the magnitudes of the acting forces and establishing the force balance. Optical emission spectroscopy in the continuous-channel regime indicated air plasma signatures and yielded a gas temperature of approximately 400 K, while prolonged operation (≈ 20 min) increased the water temperature to ~ 70 °C, reduced the water-layer thickness from 6 mm to 3 mm, and decreased pH from 7 to 4. These regime-resolved, quantitative results clarify how the dominant interfacial forcing shifts with discharge mode and provide a mechanistic basis for controlling plasma-water interactions in atmospheric-pressure applications.

atmospheric pressure plasma↗

DOE OSTI2024

The Effect of the Prior and the Experimental Design on the Inference of the Precision Matrix in Gaussian Chain Graph Models

Here, we investigate whether (and how) experimental design could aid in the estimation of the precision matrix in a Gaussian chain graph model, especially the interplay between the design, the effect of the experiment and prior knowledge about the effect. Estimation of the precision matrix is a fundamental task to infer biological graphical structures like microbial networks. We compare the marginal posterior precision of the precision matrix under four priors: flat, conjugate Normal-Wishart, Normal-MGIG and a general independent. Under the flat and conjugate priors, the Laplace-approximated posterior precision is not a function of the design matrix rendering useless any efforts to find an optimal experimental design to infer the precision matrix. In contrast, the Normal-MGIG and general independent priors do allow for the search of optimal experimental designs, yet there is a sharp upper bound on the information that can be extracted from a given experiment. We confirm our theoretical findings via a simulation study comparing (i) the KL divergence between prior and posterior and (ii) the Stein’s loss difference of MAPs between random and no experiment. Our findings provide practical advice for domain scientists conducting experiments to better infer the precision matrix as a representation of a biological network.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Time-dependent density functional theory with the orthogonal projector augmented wave method

The projector augmented wave (PAW) method of Blöchl linearly maps smooth pseudo wavefunctions to the highly oscillatory all-electron DFT orbitals. Compared to norm-conserving pseudopotentials (NCPP), PAW has the advantage of lower kinetic energy cutoffs and larger grid spacing at the cost of having to solve for non-orthogonal wavefunctions. We earlier developed orthogonal PAW (OPAW) to allow the use of PAW when orthogonal wavefunctions are required. In OPAW, the pseudo wavefunctions are transformed through the efficient application of powers of the PAW overlap operator with essentially no extra cost compared to NCPP methods. Previously, we applied OPAW to DFT. Here, we take the first step to make OPAW viable for post-DFT methods by implementing it in real-time time-dependent (TD) DFT. Using fourth-order Runge–Kutta for the time-propagation, we compare calculations of absorption spectra for various organic and biological molecules and show that very large grid spacings are sufficient, 0.6–0.7 bohr in OPAW-TDDFT rather than the 0.4–0.5 bohr used in traditional NCPP-TDDFT calculations. This reduces the memory and propagation costs by around a factor of 3. Our method would be directly applicable to any post-DFT methods that require time-dependent propagations such as the GW approximation and the Bethe–Salpeter equation.

Chemistry↗

DOE OSTI2026

Hydrogenolysis Versus Hydrocracking for Polyolefin Upcycling

Global plastic production has reached 413.8 million metric tons in 2024 and is forecasted to surpass 1.2 billion metric tons by 2050. Polyolefins, mainly polyethylene (PE) and polypropylene (PP), dominate single-use packaging and account for approximately 55% of global plastic waste. The chemical inertness that makes these materials desirable for commercial applications also renders them persistent in the environment. Current recycling technologies have proven to be insufficient to divert plastic waste from landfills or environmental loss due to technical limitations and poor economic incentives. Conventional mechanical recycling is a form of downcycling, in which the polymer remelting process results in products with inferior material properties and reduced market value. Pyrolysis, a thermochemical route used for the chemical recycling of plastic wastes into refinery feedstock, requires severe conditions, typically 400–600 °C in an oxygen-free environment. The high temperature drives up energy costs and produces a wide range of poorly defined products, including undesirable light gases and heavy tars that pose challenges for downstream processing. As an alternative, catalytic chemical recycling offers a promising route for converting waste polyolefins back into value-added hydrocarbons—such as fuels, lubricant base oils, and other chemical feedstocks—at temperatures typically below 300 °C. This opinion article focuses on two dominant pathways in heterogeneous catalysis that are used to cleave the C–C bonds of polyolefins: hydrogenolysis and hydrocracking. Both catalytic pathways have the potential to selectively convert polyolefin waste into valuable fuels and chemical feedstocks under mild conditions. Notably, while hydrocracking primarily yields branched hydrocarbon products, hydrogenolysis predominantly produces linear hydrocarbons. Here, we compare the mechanisms and catalyst designs for hydrocracking and hydrogenolysis, analyze critical technical challenges from catalyst stability to process engineering, and provide an outlook on how these complementary pathways can be used to repurpose plastic waste into valuable products.

Zhang, Ruoxi [Iowa State Univ., Ames, IA (United S↗

DOE OSTI2024

Role of the likelihood for elastic scattering uncertainty quantification

In the last decade, uncertainty quantification (UQ) for optical model potentials (OMPs) has become a focal point for nuclear reaction theory, and several competing approaches for OMP UQ have recently been developed. Here, we clarify recent efforts to compare frequentist and Bayesian approaches in the context of OMP UQ [G. B. King et al., Phys. Rev. Lett. 122, 232502 (2019)]. We replicate a portion of that OMP UQ study but use independent statistical tools. Specifically, we compare two methods for OMP parameter inference from elastic scattering data: the Levenberg-Marquardt algorithm for χ 2 minimization on one hand and Markov chain Monte Carlo (MCMC) sampling on the other. Separately, we assess the common practice of using a renormalized likelihood (χ 2 /N), N being the number of data points, instead of the canonical weighted-least-squares likelihood (χ 2 ), as a way of accounting for unknown data correlations. Here, we show that for a generic linear model and for a five-parameter OMP analysis, frequentist and uniform-prior Bayesian approaches recover the same optimum and uncertainty estimates—not systematically larger uncertainties for the Bayesian approach, as was concluded in G. B. King et al., Phys. Rev. Lett. 122, 232502 (2019). Further, we show that if an additional, near-degenerate parameter is introduced into the same OMP analysis such that the parameter posterior becomes non-Gaussian, then covariance-based estimates of uncertainty become unreliable. Finally, we show that regardless of optimization approach, if χ 2 /N is used for the likelihood, the resulting parametric uncertainties increase by $\sqrt{N}$, and that this is responsible for the conclusions drawn in the revisited study. Based on our replication results, we find that a fortuitous cancellation of unreported errors and the renormalization factor can lead to improvement in empirical coverages, as was the case in the original comparative study. We emphasize that developing and applying a realistic likelihood function is an essential task in a UQ analysis, and that several recent UQ studies that employed a renormalized likelihood (i.e., including a 1/N factor) may have yielded unrealistically large uncertainties for elastic-scattering observables. If the parameter posterior deviates from multivariate-normal, a sampling-based approach like MCMC has a clear advantage over methods that assume the Laplace approximation holds. We note that empirical coverage can serve as an important internal check for the analyst whose model or data may have additional, unaccounted-for uncertainties.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2024

The inviscid incompressible limit of Kelvin–Helmholtz instability for plasmas

The Kelvin–Helmholtz Instability (KHI) is an interface instability that develops between two fluids or plasmas flowing with a common shear layer. KHI occurs in astrophysical jets, solar atmosphere, solar flows, cometary tails, planetary magnetospheres. Two applications of interest, encompassing both space and fusion applications, drive this study: KHI formation at the outer flanks of the Earth’s magnetosphere and KHI growth from non-uniform laser heating in magnetized direct-drive implosion experiments. Here, we study 2D KHI with or without a magnetic field parallel to the flow. We use both the GAMERA code, which solves the compressible Euler equations, and the STRATOSPEC code, which solves the Navier-Stokes equations under the Boussinesq approximation, coupled with the magnetic field dynamics. GAMERA is a global three-dimensional MHD code with high-order reconstruction in arbitrary nonorthogonal curvilinear coordinates, which is developed for a large range of astrophysical applications. STRATOSPEC is a three-dimensional pseudo-spectral code with an accuracy of infinite order (no numerical diffusion). Magnetized KHI is a canonical case for benchmarking hydrocode simulations with extended MHD options. An objective is to assess whether or not, and under which conditions, the incompressibility hypothesis allows to describe a dynamic compressible system. For comparing both codes, we reach the inviscid incompressible regime, by decreasing the Mach number in GAMERA, and viscosity and diffusion in STRATOSPEC. Here, we specifically investigate both single-mode and multi-mode initial perturbations, either with or without magnetic field parallel to the flow. The method relies on comparisons of the density fields, 1D profiles of physical quantities averaged along the flow direction, and scale-by-scale spectral densities. We also address the triggering, formation and damping of filamentary structures under varying Mach number or Atwood number, with or without a parallel magnetic field. Comparisons show very satisfactory results between the two codes. The vortices dynamics is well reproduced, along with the breaking or damping of small-scale structures. We end with the extraction of growth rates of magnetized KHI from the compressible regime to the incompressible limit in the linear regime assessing the effects of compressibility under increasing magnetic field. The observed differences between the two codes are explained either from diffusion or non-Boussinesq effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

Quantum stabilization of unexpected ordered phases on the honeycomb lattice

In this work, I discuss and showcase the utility of the method called minimally-augmented spin-wave theory (MAGSWT) as a relatively simple semi-analytical approach to the phase diagrams of quantum magnets. It complements numerical methods by providing physical insight into which states are competitive and by yielding approximate phase boundaries that agree well with much more numerically intensive calculations. This approach enabled me to construct the faithful phase diagrams of two paradigmatic honeycomb-lattice models in the quantum S=1/2 limit, the J 1 –J 3 FM-AF and J 1 –J 2 AF models, for the collinear quantum phases that replace or extend the classical ones. The results are in good qualitative and semi-quantitative agreement with state-of-the-art numerical studies for these models, correctly capturing the emergence of unexpected quantum phases and the suppression of classically favored spiral orders by quantum fluctuations. This study provides a much-needed important guidance to the ongoing theoretical and experimental searches of the unconventional quantum states. This work will be of significant and timely interest to both theorists and experimentalists in the field of quantum magnetism, broadly defined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

Shock Hugoniot calculations using on-the-fly machine learned force fields with ab initio accuracy

We present a framework for computing the shock Hugoniot using on-the-fly machine learned force field (MLFF) molecular dynamics simulations. In particular, we employ an MLFF model based on the kernel method and Bayesian linear regression to compute the free energy, atomic forces, and pressure, in conjunction with a linear regression model between the internal and free energies to compute the internal energy, with all training data generated from Kohn–Sham density functional theory (DFT). We verify the accuracy of the formalism by comparing the Hugoniot for carbon with recent Kohn–Sham DFT results in the literature. In so doing, we demonstrate that Kohn–Sham calculations for the Hugoniot can be accelerated by up to two orders of magnitude, while retaining ab initio accuracy. We apply this framework to calculate the Hugoniots of 14 materials in the FPEOS database, comprising 9 single elements and 5 compounds, between temperatures of 10 kK and 2 MK. We find good agreement with first principles results in the literature while providing tighter error bars. In addition, we confirm that the inter-element interaction in compounds decreases with temperature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2026

Importance of finite-size corrections for accurate ab initio modeling of carrier capture at semiconductor defects: A case study of substitutional C N in GaN

In ab initio studies of carrier-capture processes in defective semiconductor materials, the single-effective-mode formalism and the static-coupling approximation have become the predominant theoretical approaches for determining carrier-capture coefficients. The single-mode formalism relies on accurate nonequilibrium defect energies obtained from density-functional theory (DFT), where required inputs are a series of configurationally displaced, defect-containing supercells obtained using an interpolative ansatz, and where the DFT outputs are corresponding total energies that have traditionally been postprocessed using a long-established ground-state formulation of finite-size corrections and defect-formation energies. This formulation remains commonly used even though the defects that form a configuration-coordinate (CC) diagram typically exist as structures that are displaced from the ground state. To remedy this inconsistency, Kumagai has recently proposed novel methods for implementing finite-size corrections specifically intended for DFT calculations of the defect energies used to construct CC diagrams and implement the single-mode formalism [Y. Kumagai, Phys. Rev. B 107, L220101 (2023)]. Kumagai's approach builds on the latest finite-size-correction methods introduced to describe vertical charge-state transitions for charge-localizing point defects in semiconductors and insulators [T. Gake et al., Phys. Rev. B 101, 020102 (2020); S. Falletta et al., Phys. Rev. B 102, 041115 (2020)]. The newly identified finite-size artifact treated in these studies is the polarization charge induced on a configurationally frozen defect and its subsequent interaction with a vertical transition in charge state. In this work, we evaluate Kumagai's proposed methodology by applying it in a high-precision DFT study of carrier capture by substitutional C N in GaN, a well-characterized and technologically relevant defect and material. We have rigorously calculated C N defect energies across various supercell sizes for each defect configuration and charge state on the hole-capture CC diagram of C N (𝑞=−1), enabling a direct comparison of the slopes of the defect energies versus inverse cell size with those predicted by Kumagai. The most consequential prediction of Kumagai's method is that these slopes distinctly vary as the square of the linear-interpolation parameter used to construct the nonequilibrium defect configurations. Our results quantitatively support this prediction. Moreover, with these new finite-size corrections and multiple-cell-size DFT calculations in place, we find that the classical energy barrier for hole capture by C N (𝑞=−1) in GaN decreases to 0.092–0.127 eV. This finding confirms the recent ≈ 0.1 eV prediction of Reshchikov based on the weak temperature dependence for hole capture observed in photoluminescence experiments [M. A. Reshchikov, J. Appl. Phys. 129, 121101 (2021)]. These results stand in stark contrast to previously calculated barriers of 0.486 and 0.73 eV, which also used the single-mode formalism but were obtained by instead using ground-state-based finite-size corrections. Our reduced classical barrier for capture increases the temperature-dependent hole-capture coefficient of a C N (𝑞=−1) defect by more than two to four orders of magnitude for temperatures of 100–600 K, compared to the previous 0.486 eV results. While other defects may not be as dramatically affected as here, we suggest that incorporating proper finite-size corrections for the vertical-transition-like states embedded within CC diagrams is an essential, yet previously unrecognized, component of accurate modeling of carrier-capture when using the single-effective-mode formalism.

dielectric properties↗