Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC BALANCES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Can Kelvin-Helmholtz Instabilites of Jet-Like Structures and Plumes Cause Solar Wind Fluctuations at 1 AU?

The long high-latitude sampling of Ulysses provides the opportunity to study fine structures. At latitudes poleward of about -60 degrees the solar wind had fluctuations in velocity gradients which were attributed to "microstreams." The data also suggested fluctuations characterized by magnetic plus thermal pressure balance structures ('PBS'). At higher frequencies, MHD turbulence was observed and found to be less evolved than it is in the ecliptic but essentially independent of heliographic latitude. It is argued here that microstreams, PBS, and MHD turbulence could all be the remnants of mixing due to shear instabilities associated with plumes and other filamentary structures ("jets") in coronal holes. To show this, we simulate a plume-like jet in the presence of an ambient magnetic field. We find that the presence of the ambient field reduces the growth rate of the instability, but the shear between a jet and its ambient still becomes unstable to the MHD Kelvin-Helmholtz instability when the shear speed is larger than the largest local magnetosonic speed, a condition probably satisfied for plumes.

Parhi, S.↗

The location of the dayside ionopause of Venus - Pioneer Venus Orbiter magnetometer observations

The location of the dayside Venus ionopause, as observed by the Pioneer Venus Orbiter, is shown to depend on the magnetic pressure in the shocked, highly compressed solar wind plasma just outside the ionopause. Assuming a balance exclusively between this external magnetic pressure and internal ionospheric thermal pressure, invariance of ionospheric conditions, and an isothermal ionosphere, it is possible to determine pressure scale heights for various solar zenith angle intervals. These scale heights yield ionospheric temperatures which agree with direct measurements obtained independently. Not surprisingly, the average ionopause altitude is higher near the terminator, where the average external magnetic pressure is lower. The near-terminator ionopause has much greater positional variability than that at lower solar zenith angles; this appears to be due principally to concomitant variations in the external magnetic pressure, presumably related to solar wind pressure changes.

Elphic, R. C.↗

The Width of a CME and the Source of the Driving Magnetic Explosion

We show that the strength of the magnetic field in the area covered by the flare arcade following a CME-producing ejective solar eruption can be estimated from the final angular width of the CME in the outer corona and the final angular width of the flare arcade. We assume (1) the flux-rope plasmoid ejected from the flare site becomes the interior of the CME plasmoid, (2) in the outer corona the CME is roughly a "spherical plasmoid with legs" shaped like a light bulb, and (3) beyond some height in or below the outer corona the CME plasmoid is in lateral pressure balance with the surrounding magnetic field. The strength of the nearly radial magnetic field in the outer corona is estimated from the radial component of the interplanetary magnetic field measured by Ulysses. We apply this model to three well-observed CMEs that exploded from flare regions of extremely different size and magnetic setting. In each event, the estimated source-region field strength is appropriate for the magnetic setting of the flare. This agreement indicates via the model that CMEs (1) are propelled by the magnetic field of the CME plasmoid pushing against the surrounding magnetic field, and (2) can explode from flare regions that are laterally far offset from the radial path of the CME in the outer corona.

Moore, R. L.↗

The Width of a Solar Coronal Mass Ejection and the Source of the Driving Magnetic Explosion

We show that the strength of the magnetic field in the area covered by the flare arcade following a CME-producing ejective solar eruption can be estimated from the final angular width of the CME in the outer corona and the final angular width of the flare arcade. We assume (1) the flux-rope plasmoid ejected from the flare site becomes the interior of the CME plasmoid, (2) in the outer corona (R greater than 2R(sub Sun)) the CME is roughly a spherical plasmoid with legs shaped like a light bulb, and (3) beyond some height in or below the outer corona the CME plasmoid is in lateral pressure balance with the surrounding magnetic field. The strength of the nearly radial magnetic field in the outer corona is estimated from the radial component of the interplanetary magnetic field measured by Ulysses. We apply this model to three well-observed CMEs that exploded from flare regions of extremely different size and magnetic setting. One of these CMEs is an over-and-out CME that exploded from a laterally far offset compact ejective flare. In each event, the estimated source-region field strength is appropriate for the magnetic setting of the flare. This agreement (1) indicates that CMEs are propelled by the magnetic field of the CME plasmoid pushing against the surrounding magnetic field, (2) supports the magnetic-arch-blowout scenario for over-and-out CMEs, and (3) shows that a CME s final angular width in the outer corona can be estimated from the amount of magnetic flux covered by the source-region flare arcade.

Moore, Ronald L.↗

Force balance near an X line in a collisionless plasma

The suggestion by Dungey (1988) that the gyroviscosity associated with gradients of the off-diagonal elements of the electron pressure tensor can balance a reconnection electric field along a magnetic X line in a collisionless plasma is investigated. The detailed balance of forces in the vicinity of an X line is evaluated using a two-dimensional magnetic field model and a simple model for particle motion. The results show that the gyroviscosity can indeed provide the force required to balance a reconnection electric field in that region, so that neither collisions nor wave turbulence are necessary for reconnection. The results also show that there should not be a significant increase in current from electron acceleration very near an X line. Reasonable numerical estimates are obtained for conditions expected in the vicinity of the distant X line in the geomagnetic tail.

Lyons, L. R.↗

Operational advances in ring current modeling using RAM-SCB

The Ring current Atmosphere interaction Model with Self-Consistently calculated 3D Magnetic field (RAM-SCB) combines a kinetic model of the ring current with a force-balanced model of the magnetospheric magnetic field to create an inner magnetospheric model that is magnetically self consistent. RAM-SCB produces a wealth of outputs that are valuable to space weather applications. For example, the anisotropic particle distribution of the KeV-energy population calculated by the code is key for predicting surface charging on spacecraft. Furthermore, radiation belt codes stand to benefit substantially from RAM-SCB calculated magnetic field values and plasma wave growth rates - both important for determining the evolution of relativistic electron populations. RAM-SCB is undergoing development to bring these benefits to the space weather community. Data-model validation efforts are underway to assess the performance of the system. 'Virtual Satellite' capability has been added to yield satellite-specific particle distribution and magnetic field output. The code's outer boundary is being expanded to 10 Earth Radii to encompass previously neglected geosynchronous orbits and allow the code to be driven completely by either empirical or first-principles based inputs. These advances are culminating towards a new, real-time version of the code, rtRAM-SCB, that can monitor the inner magnetosphere conditions on both a global and spacecraft-specific level. This paper summarizes these new features as well as the benefits they provide the space weather community.

47 OTHER INSTRUMENTATION↗

FLORA Equilibrium and Stability Code Archive

FLORA solves, in a 2-D domain (radial and axial dimensions) with a specified azimuthal Fourier mode, for the linearized stability of a long, thin, axisymmetric plasma equilibrium in an applied magnetic field. Before the stability equation is solved, FLORA solves a set of simple equations for pressure balance that specify the equilibrium magnetic field and plasma pressure in the long-thin limit given a simplified description of the magnetic coils. It uses an initial-value method for the linear stability problem in which an equilibrium is given an initial perturbation to its magnetic field, and the temporal behavior of the perturbation is followed. The perturbation has been Fourier expanded in the azimuthal coordinate; each azimuthal mode must be examined separately. The complex partial differential equation of motion for the perturbed radial displacement of the field lines is solved as a coupled system of two real p.d.e.'s and the solution consists of two parts, the real part and the imaginary part. The system is solved by bringing the coupling terms in each equation to the right side and using an iterative technique.

Cohen, Bruce [Lawrence Livermore National Laborato↗

The Width of a Solar Coronal Mass Ejection and the Source of the Driving Magnetic Explosion: A Test of the Standard Scenario for CME Production

We show that the strength (B(sub F1are)) of the magnetic field in the area covered by the flare arcade following a CME-producing ejective solar eruption can be estimated from the final angular width (Final Theta(sub CME)) of the CME in the outer corona and the final angular width (Theta(sub Flare)) of the flare arcade: B(sub Flare) approx. equals 1.4[(Final Theta(sub CME)/Theta(sub Flare)] (exp 2)G. We assume (1) the flux-rope plasmoid ejected from the flare site becomes the interior of the CME plasmoid; (2) in the outer corona (R > 2 (solar radius)) the CME is roughly a "spherical plasmoid with legs" shaped like a lightbulb; and (3) beyond some height in or below the outer corona the CME plasmoid is in lateral pressure balance with the surrounding magnetic field. The strength of the nearly radial magnetic field in the outer corona is estimated from the radial component of the interplanetary magnetic field measured by Ulysses. We apply this model to three well-observed CMEs that exploded from flare regions of extremely different size and magnetic setting. One of these CMEs was an over-and-out CME, that is, in the outer corona the CME was laterally far offset from the flare-marked source of the driving magnetic explosion. In each event, the estimated source-region field strength is appropriate for the magnetic setting of the flare. This agreement (1) indicates that CMEs are propelled by the magnetic field of the CME plasmoid pushing against the surrounding magnetic field; (2) supports the magnetic-arch-blowout scenario for over-and-out CMEs; and (3) shows that a CME's final angular width in the outer corona can be estimated from the amount of magnetic flux covered by the source-region flare arcade.

Moore, Ronald L.↗

Role of the edge stochastic layer in density pump-out by resonant magnetic perturbations

The role of the edge stochastic layer on particle transport is addressed in DIII-D plasmas with applied resonant magnetic perturbations (RMPs) causing density pump-out (a term used to denote the density reduction at the top of the pedestal due to the applied RMPs). Using an analytical model that adds the stochastic parallel transport of electrons (Harvey et al 1981 Phys. Rev. Lett. 47 102) to the fluid equations, the ambipolar radial electric field and particle flux are calculated simultaneously. In this model the nonambipolar electron particle flux, driven by the stochastic magnetic field, is predominantly balanced by the nonambipolar perpendicular ion flux, driven by toroidal viscosity, across a narrow stochastic layer of order two percent of the plasma radius (0.98 < ψn < 1). The model reproduces the level of density pump-out and its dependence on RMP amplitude near the separatrix for three plasma discharges for which the pedestal foot is at medium to high collisionality $(2\leqslant {\nu }_{\text{sep}}^{\ast }\leqslant 30)$. In this work, the experimentally observed and numerically tested inverse density dependence of density pump-out (Hu et al 2020 Nucl. Fusion 60 076001) is accurately captured by the model: an increase in collisionality with density in the pedestal foot results in a decrease in stochastic diffusivity, and hence a decrease in the level of pump-out.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The early hydration of OPC investigated by in-situ XRD, heat flow calorimetry, pore water analysis and 1H NMR: Learning about adsorbed ions from a complete mass balance approach

In-situ XRD, heat flow calorimetry, pore water analysis and {sup 1}H NMR were used in order to gain more detailed understanding for cement hydration within the first hours of hydration. All methods used show very satisfying accordance. All information gained from the different methods were used in order to calculate absolute mass balance for several ions in order to get an idea about ionic reservoirs adsorbed on surfaces during cement hydration. Sulfate and aluminum adsorption show impact on sulfate depletion, calcium does not.

36 MATERIALS SCIENCE↗

Spin switches for compact implementation of neuron and synapse

Nanomagnets driven by spin currents provide a natural implementation for a neuron and a synapse: currents allow convenient summation of multiple inputs, while the magnet provides the threshold function. The objective of this paper is to explore the possibility of a hardware neural network implementation using a spin switch (SS) as its basic building block. SS is a recently proposed device based on established technology with a transistor-like gain and input-output isolation. This allows neural networks to be constructed with purely passive interconnections without intervening clocks or amplifiers. The weights for the neural network are conveniently adjusted through analog voltages that can be stored in a non-volatile manner in an underlying CMOS layer using a floating gate low dropout voltage regulator. The operation of a multi-layer SS neural network designed for character recognition is demonstrated using a standard simulation model based on coupled Landau-Lifshitz-Gilbert equations, one for each magnet in the network.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

QUASI-STEADY CONFIGURATIONS OF CONDUCTIVE INTRACLUSTER MEDIA

The radial distributions of temperature, density, and gas entropy among cool-core clusters tend to be quite similar, suggesting that they have entered a quasi-steady state. If that state is regulated by a combination of thermal conduction and feedback from a central active galactic nucleus (AGN), then the characteristics of those radial profiles ought to contain information about the spatial distribution of AGN heat input and the relative importance of thermal conduction. This paper addresses those topics by deriving steady-state solutions for clusters in which radiative cooling, electron thermal conduction, and thermal feedback fueled by accretion are all present, with the aim of interpreting the configurations of cool-core clusters in terms of steady-state models. It finds that the core configurations of many cool-core clusters have entropy levels just below those of conductively balanced solutions in which magnetic fields have suppressed electron thermal conduction to {approx}1/3 of the full Spitzer value, suggesting that AGN feedback is triggered when conduction can no longer compensate for radiative cooling. And even when feedback is necessary to heat the central {approx}30 kpc, conduction may still be the most important heating mechanism within a cluster's central {approx}100 kpc.

79 ASTRONOMY AND ASTROPHYSICS↗

Sensitivity of magnetohydrodynamic simulations of Joule-heated conductors to the vaporization curve in equations of state

Magnetohydrodynamic (MHD) simulations of electrically exploded aluminum and copper rods demonstrate a technique to validate equations of state (EOS) for rapidly Joule-heated conductors. The balance of internal and magnetic forces at the conductor-insulator interface drives the metal there along the vaporization phase boundary. Variations between critical points and vaporization curves in existing models predict differing densities and temperatures in MHD simulations for these models. Here, the inclusion of Maxwell constructs in the liquid-vapor biphase region of the EOS caused the rod surface to vaporize earlier in time than unmodified tables with van der Waals loops. Velocimetry of recent experiments is used to validate the location of the vaporization curve in existing EOS models and differentiate between the vapor dome treatments. Dielectric coatings applied to the metal surface restricted the conductor’s expansion and diverted the metal into the warm dense matter regime.

36 MATERIALS SCIENCE↗

Standardized Testing Program for Solid-State Hydrogen Storage Technologies

In the US and abroad, major research and development initiatives toward establishing a hydrogen-based transportation infrastructure have been undertaken, encompassing key technological challenges in hydrogen production and delivery, fuel cells, and hydrogen storage. However, the principal obstacle to the implementation of a safe, low-pressure hydrogen fueling system for fuel-cell powered vehicles remains storage under conditions of near-ambient temperature and moderate pressure. The choices for viable hydrogen storage systems at the present time are limited to compressed gas storage tanks, cryogenic liquid hydrogen storage tanks, chemical hydrogen storage, and hydrogen absorbed or adsorbed in a solid-state material (a.k.a. solid-state storage). Solid-state hydrogen storage may offer overriding benefits in terms of storage capacity, kinetics and, most importantly, safety. The fervor among the research community to develop novel storage materials had, in many instances, the unfortunate consequence of making erroneous, if not wild, claims on the reported storage capacities achievable in such materials, to the extent that the potential viability of emerging materials was difficult to assess. This problem led to a widespread need to establish a capability to accurately and independently assess the storage behavior of a wide array of different classes of solid-state storage materials, employing qualified methods, thus allowing development efforts to focus on those materials that showed the most promise. However, standard guidelines, dedicated facilities, or certification programs specifically aimed at testing and assessing the performance, safety, and life cycle of these emergent materials had not been established. To address the stated need, the Testing Laboratory for Solid-State Hydrogen Storage Technologies was commissioned as a national-level focal point for evaluating new materials emerging from the designated Materials Centers of Excellence (MCoE) according to established and qualified standards. Working with industry, academia, and the U.S. government, SwRI set out to develop an accepted set of evaluation standards and analytical methodologies. Critical measurements of hydrogen sorption properties in the Laboratory have been based on three analytical capabilities: 1) a high-pressure Sievert-type volumetric analyzer, modified to improve low-temperature isothermal analyses of physisorption materials and permit in situ mass spectroscopic analysis of the sample’s gas space; 2) a static, high-pressure thermogravimetric analyzer employing an advanced magnetic suspension electro-balance, glove-box containment, and capillary interface for in situ mass spectroscopic analysis of the sample’s gas space; and 3) a Laser-induced Thermal Desorption Mass Spectrometer (LTDMS) system for high thermal-resolution desorption and mechanistic analyses. The Laboratory has played an important role in down-selecting materials and systems that have emerged from the MCoEs.

08 HYDROGEN↗

ORION’S VEIL. IV. H{sub 2} EXCITATION AND GEOMETRY

The foreground Veil of material that lies in front of the Orion Nebula is the best studied sample of the interstellar medium because we know where it is located, how it is illuminated, and the balance of thermal and magnetic energy. In this work, we present high-resolution STIS observations toward the Trapezium, with the goal of better understanding the chemistry and geometry of the two primary Veil layers, along with ionized gas along the line of sight. The most complete characterization of the rotational/vibrational column densities of H{sub 2} in the almost purely atomic components of the Veil are presented, including updates to the Cloudy model for H{sub 2} formation on grain surfaces. The observed H{sub 2} is found to correlate almost exclusively with Component B. The observed H{sub 2}, observations of CI, CI*, and CI**, and theoretical calculations using Cloudy allow us to place the tightest constraints yet on the distance, density, temperature, and other physical characteristics for each cloud component. We find the H{sub 2} excitation spectrum observed in the Veil is incompatible with a recent study that argued that the Veil was quite close to the Trapezium. The nature of a layer of ionized gas lying between the Veil and the Trapezium is characterized through the emission and absorption lines it produces, which we find to be the blueshifted component observed in S iii and P iii absorption. We deduce that, within the next 30–60 thousand years, the blueshifted ionized layer and Component B will merge, which will subsequently merge with Component A in the next one million years.

79 ASTRONOMY AND ASTROPHYSICS↗

Interaction of Convection and Small-scale Magnetic Fields: Influence on the Solar Luminosity

Changes in the local solar luminosity due to the presence of a small scale structured (facular) magnetic field in the photosphere are discussed. The discussion is based on three dimensional numerical simulations of the magnetohydrodynamics of the top of the convection zone, and the adjacent stable photosphere. The simulations demonstrate that practically all of the magnetic flux present is concentrated into intense magnetic flux structures, such that the magnetic field pressure is balanced by the gas pressure of the surrounding plasma. The flux concentration is caused by the convectively unstable stratification. The average luminosity of the area is influenced by three effects: (1) the brightness of the flux concentrations, (2) their filling factor, and (3) the average luminosity of the surrounding plasma.

Nordlund, A.↗

Magnetic reconnection flares in the protoplanetary nebula and the possible origin of meteorite chondrules

A possible episodic heating mechanism that could account for chondrule formation is discussed. The mechanism involves the transient release of energy as a result of magnetic flares in the corona of the protosolar nebula. The possible magnetic behavior of the protosolar nebula is outlined, based on meteorite paleomagnetic evidence about the magnetic field of the protoplanetary nebula and observations of the behavior of magnetic fields. The thermal balance in the melting of a chondrule precursor dust ball is examined. Observational evidence supporting the proposed heating mechanism is presented.

Lavy, Eugene H.↗