Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC DIPOLES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Collective excitations and low-energy ionization signatures of relativistic particles in silicon detectors

Abstract Solid-state detectors with a low energy threshold have several applications, including searches of non-relativistic halo dark-matter particles with sub-GeV masses. When searching for relativistic, beyond-the-Standard-Model particles with enhanced cross sections for small energy transfers, a small detector with a low energy threshold may have better sensitivity than a larger detector with a higher energy threshold. In this paper, we calculate the low-energy ionization spectrum from high-velocity particles scattering in a dielectric material. We consider the full material response including the excitation of bulk plasmons. We generalize the energy-loss function to relativistic kinematics, and benchmark existing tools used for halo dark-matter scattering against electron energy-loss spectroscopy data. Compared to calculations commonly used in the literature, such as the Photo-Absorption-Ionization model or the free-electron model, including collective effects shifts the recoil ionization spectrum towards higher energies, typically peaking around 4–6 electron-hole pairs. We apply our results to the three benchmark examples: millicharged particles produced in a beam, neutrinos with a magnetic dipole moment produced in a reactor, and upscattered dark-matter particles. Our results show that the proper inclusion of collective effects typically enhances a detector’s sensitivity to these particles, since detector backgrounds, such as dark counts, peak at lower energies.

Physics↗
DOE OSTI2020

An intriguing intermediate state as a bridge between antiferroelectric and ferroelectric perovskites

The configuration of electric or magnetic dipoles embedded into a crystal lattice gives rise to the defining physical properties of a functional material. The prevailing antiferroelectric materials have so far been allusively assumed to be in a strict antiparallel electric polarization configuration, although they have shown huge potential applications for use in electronic devices. Herein, we have revealed for the first time the complex crystal structure of an intermediate state between the two conventional antiferroelectric (AFE) and ferroelectric (FE) states in PbZrO 3 -based perovskites by employing a combination of advanced synchrotron X-ray, neutron and three-dimensional (3D) electron diffraction techniques. We found that the intermediate state displays an intriguing flexible configuration of a sinusoidal wave functional with imbalanced polarization, different to the commonly believed antiparallel and balanced polarization. Such an intermediate state was concluded to act as a bridge between the conventional AFE and FE states. Our observations offer new insight into the AFE state and its transformation into the FE state. Such an intermediate state with a unique polarization configuration is believed to be a common feature that occurs in high-performance AFE perovskite materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Application of saturation absorption spectroscopy to study the hyperfine structure of 235U and accurate 235U/238U isotope ratio determinations at 861.031 nm

The uranium transition 5f 3 6d7s 2 ( 5 L 6 ) → 5f 3 7s 2 7p ( 5 K 5 ) at 861.031 nm was studied using saturation absorption spectroscopy. The hyperfine structure of the 235 U isotope was determined by measuring the Doppler-suppressed absorption spectrum, and the hyperfine structure constants were obtained by employing transition-specific line strength theory and spectral fitting. The magnetic-dipole and electric-quadrupole constants were determined to be A = -3.2887 ± 0.1957 mK and B = 31.8712 ± 8.0789 mK for the upper state 5f 3 7s 2 7p ( 5 K 5 ). A theoretical calculation for the hyperfine structure constants of the 235 U isotope was also carried out by the relativistic configuration-interaction (RCI) method, and the obtained values were found to be in agreement with the measured values. In addition, the line profile of 238 U was experimentally investigated for different excitation intensities and modeled using the RCI method for estimating the transition probability and oscillator strength, with various residual broadening mechanisms considered beyond the radiative decay. Finally, we show that these results allow us to make improvements on the precision of spectral measurements using our previously developed technique for isotope ratio determinations in atomic beams.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

The Heavy Photon Search (HPS) Software Environment

The Heavy Photon Search (HPS) is an experiment at the Thomas Jefferson National Accelerator Facility (JLab) designed to search for a hidden sector photon (A’) in fixed-target electro-production. It uses a silicon microstrip tracking and vertexing detector placed inside a dipole magnet to measure charged particle trajectories and a fast lead-tungstate crystal calorimeter located just downstream of the magnet to provide a trigger and to identify electromagnetic showers. The HPS experiment uses both invariant mass and secondary vertex signatures to search for the A’. The experimental collaboration is small and quite heterogeneous: it is composed of members of the nuclear physics as well as particle physics communities, from universities and national labs from around the US and Europe. Enabling such a disparate group to concentrate on the physics aspects of the experiment required that the software be easy to install and use, and having such limited manpower meant that existing solutions had to be exploited. HPS has successfully completed two engineering runs and completed its first physics run in the summer of 2019. We begin with an overview of the physics goals of the experiment followed by a short description of the detector design. We then describe the software tools used to design the detector layout and simulate the expected detector performance. Event reconstruction involving track, cluster and vertex finding and fitting for both simulated and real data was, to first order, adopted from existing software originally developed for Linear Collider studies. Bringing it all together into a cohesive whole involved the use of multiple software solutions with common interfaces.

Graf, Norman↗
DOE OSTI2020

A compact, high resolution energy, and emittance diagnostic for electron beams using active plasma lenses

High-resolution (sub-%), single-shot energy distribution, and emittance measurements of GeV-class electron beams generated by laser plasma accelerators (LPAs) have been enabled through the use of an active plasma lens combined with relatively short dipole magnets. This setup, with only 60 cm between the LPA source and the final diagnostic screen, was facilitated through the use of a replenishable ∼20–40 nm thick liquid crystal plasma mirror to separate remnant laser radiation from the electron beam without emittance degradation. As LPAs capable of generating GeV-class electron beams at cm-scale distances become increasingly ubiquitous, there is a need to supplement these compact accelerators with equally compact diagnostics.

Barber, S. K. (ORCID:0000000172518755)↗
DOE OSTI2024

Current potential patches

A novel form of the current potential, a mathematical tool for the design of stellarators and stellarator coils, is developed. Specifically, these are current potentials with a finite-element basis, called current potential patches. Current potential patches leverage the relationship between distributions of magnetic dipoles and current potentials to explore limits of the access properties of stellarator coil sets. An example calculation is shown using the Helically Symmetric Experiment (HSX) equilibrium, demonstrating the method's use in coil design and understanding the limits of the access properties of coil sets. Current potential patches have additional desirable properties such as of promoting sparse current sheet solutions and identifying crucial locations of shaping current placement. A result is found for the HSX equilibrium that shaping currents covering only 22% of the winding surface are sufficient to produce the equilibrium to a good accuracy, provided a toroidal field is generated by an exterior coil set.

Elder, Todd↗
DOE OSTI2020

Intrinsic operators for the translationally-invariant many-body problem

Abstract The need to enforce fermionic antisymmetry in the nuclear many-body problem commonly requires use of single-particle coordinates, defined relative to some fixed origin. To obtain physical operators which nonetheless act on the nuclear many-body system in a Galilean-invariant fashion, thereby avoiding spurious center-of-mass contributions to observables, it is necessary to express these operators with respect to the translational intrinsic frame. Several commonly-encountered operators in nuclear many-body calculations, including the magnetic dipole and electric quadrupole operators (in the impulse approximation) and generators of U(3) and Sp ( 3 , R ) symmetry groups, are bilinear in the coordinates and momenta of the nucleons and, when expressed in intrinsic form, become two-body operators. To work with such operators in a second-quantized many-body calculation, it is necessary to relate three distinct forms: the defining intrinsic-frame expression, an explicitly two-body expression in terms of two-particle relative coordinates, and a decomposition into one-body and separable two-body parts. We establish the relations between these forms, for general (non-scalar and non-isoscalar) operators bilinear in coordinates and momenta.

Physics↗
DOE OSTI2018

Controlling Cu–Sn mixing so as to enable higher critical current densities in RRP ® Nb 3 Sn wires

Dipole magnets for the proposed Future Circular Collider (FCC) demand specifications significantly beyond the limits of all existing Nb 3 Sn wires, in particular a critical current density (J c ) of more than 1500 A mm -2 at 16 T and 4.2 K with an effective filament diameter (D eff ) of less than 20 μm. The restacked-rod-process (RRP ® ) is the technology closest to meeting these demands, with a J c (16 T) of up to 1400 A mm -2 , residual resistivity ratio > 100, for a sub-element size D s of 58 μm (which in RRP ® wires is essentially the same as D eff ). An important present limitation of RRP ® is that reducing the sub-element size degrades J c to as low as 900 A mm -2 at 16 T for D s = 35 μm. To gain an understanding of the sources of this J c degradation, we have made a detailed study of the phase evolution during the Cu–Sn 'mixing' stages of the wire heat treatment that occur prior to Nb 3 Sn formation. Using extensive microstructural quantification, we have identified in this paper the critical role that the Sn–Nb–Cu ternary phase (Nausite) can play. The Nausite forms as a well-defined ring between the Sn source and the Cu/Nb filament pack, and acts as an osmotic membrane in the 300 °C–400 °C range—greatly inhibiting Sn diffusion into the Cu/Nb filament pack while supporting a strong Cu counter-diffusion from the filament pack into the Sn core. This converts the Sn core into a mixture of the low melting point (408 °C) η phase (Cu 6 Sn 5 ) and the more desirable ε phase (Cu 3 Sn), which decomposes at 676 °C. After the mixing stages, when heated above 408 °C towards the Nb 3 Sn reaction, any residual η liquefies to form additional irregular Nausite on the inside of the membrane. All Nausite decomposes into NbSn 2 on further heating, and ultimately transforms into coarse-grain (and often disconnected) Nb 3 Sn which has little contribution to current transport. Understanding this critical Nausite reaction pathway has allowed us to simplify the mixing heat treatment to only one stage at 350 °C for 400 h which minimizes Nausite formation while encouraging the formation of the higher melting point ε phase through better Cu–Sn mixing. Finally, at a D s of 41 μm, the Nausite control heat treatment increases the J c at 16 T by 36%, reaching 1300 A mm -2 (i.e. 2980 A mm -2 at 12 T), and moving RRP ® closer to the FCC targets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Beneficial influence of Hf and Zr additions to Nb4at%Ta on the vortex pinning of Nb 3 Sn with and without an O source

In this paper we show that addition of Hf to Nb4Ta can significantly improve the high field performance of Nb 3 Sn, making it suitable for dipole magnets for a machine like the 100 TeV Future Circular Collider (FCC). A big challenge of the FCC is that the desired non-Cu critical current density (J c ) target of 1500 A mm –2 (16 T, 4.2 K) is substantially above the best present Nb 3 Sn conductors doped with Ti or Ta (~1300 A mm –2 in the very best sample of the very best commercial wire). Recent success with internal oxidation of Nb–Zr precursor has shown significant improvement in the layer J c of Nb 3 Sn wires, albeit with the complication of providing an internal oxygen diffusion pathway and avoiding degradation of the irreversibility field H Irr . We here extend the Nb1Zr oxidation approach by comparing Zr and Hf additions to the standard Nb4Ta alloy of maximum H c2 and H Irr . Nb4Ta rods with 1Zr or 1Hf were made into monofilament wires with and without SnO 2 and their properties measured over the entire superconducting range at fields up to 31 T. We found that Group IV alloying of Nb4Ta does raise H Irr , though O 2 addition still slightly degrades it. As noted in earlier Nb1Zr work with an O source, the pinning force density F p is strongly enhanced and its peak value shifted to higher field by internal oxidation. A surprising result of this work is that we found better properties in Nb4Ta1Hf without SnO 2 , F pMax achieving 2.35 times that of the standard Nb4Ta alloy, while the oxidized Nb4Ta1Zr alloy achieved 1.54 times that of the Nb4Ta alloy. The highest layer J c (16 T, 4.2 K) of 3700 A mm –2 was found in the SnO 2 -free wire made with Nb4Ta1Hf alloy. Using a standard A15 cross-section fraction of 60% for modern powder-in-tube and rod restack process wires, we estimated that a non-Cu J c of 2200 A mm –2 is obtainable in modern conductors, well above the 1500 A mm –2 FCC specification. Moreover, since the best properties were obtained without SnO 2 , the Nb4Ta1Hf alloy appears to open a straightforward route to enhanced properties in Nb 3 Sn wires manufactured by virtually all the presently used commercial routes employed today.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A very high energy hadron collider on the Moon

Abstract The long-term prospect of building a hadron collider around the circumference of a great circle of the Moon is sketched. A circular collider on the Moon (CCM) of ∼11 000 km in circumference could reach a proton–proton center-of-mass collision energy of 14 PeV—a thousand times higher than the Large Hadron Collider at CERN—optimistically assuming a dipole magnetic field of 20 T. Several aspects of such a project are presented, including siting, construction, availability of necessary materials on the Moon, and powering, as well as a discussion of future studies and further information needed to determine the more concrete feasibility of each. Machine parameters and vacuum requirements are explored, and an injection scheme is delineated. Other unknowns are set down. Due to the strong interest from multiple organizations in establishing a permanent Moon presence, a CCM could be the (next-to-) next-to-next-generation discovery machine for high-energy particle physics and a natural successor to next-generation machines, such as the proposed future circular collider at CERN or a super proton–proton collider in China, and other future machines, such as a collider in the Sea, in the Gulf of Mexico. A CCM would serve as an important stepping stone toward a Planck-scale collider sited in our Solar System.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Analytic Chromaticity Formulas for the Muon g -2 experiment at fermilab

The Muon g-2 Experiment (E989) at Fermilab measured the muon anomalous magnetic moment aμ with unprecedented precision of 127 ppb using a storage ring. The experiment pushed the limits in terms of accuracy and systematic errors. Achieving the 78-ppb total systematic uncertainty required precise beam dynamics modeling and corrections for effects on the measured muon precession frequency. Here, we derived the first analytic aberration formulas up to the second order for the muon g-2 storage ring’s combined-function electrostatic quadrupoles (superimposed magnetic dipole and electric quadrupole fields) using an order-by-order perturbation method. From these, we obtained the exact chromaticity formulas for three ring models of different granularity and validated them against numerical calculations using COSY INFINITY, achieving analytic-numerical agreement to ⁠$\mathscr{O}(10^{-10})$. This work resolved discrepancies between previous approximate derivations and provided essential beam dynamics results for Runs 4-6 analyses. We also calculated nonlinear chromaticities up to ninth order. The experiment completed its final Run 6 in July 2023, collecting 21 times more data than the previous muon g-2 experiment at Brookhaven National Laboratory, with the final result announced in June 2025.

aberrations↗
DOE OSTI2026

Nanoscale Defects as Probes of Time-Reversal Symmetry Breaking

Nanoscale defects such as nitrogen-vacancy (NV) centers can serve as sensitive and noninvasive probes of electromagnetic fields and fluctuations from materials, which in turn can be used to characterize these systems. Here we specifically discuss how NV centers can probe time-reversal symmetry breaking (TRSB) phenomena in low-dimensional electronic systems. We argue that the difference in relaxation rates Γ$_{±\hat{z}}$ of NV centers starting from 𝑚 = ±1 spin states to the ground state with 𝑚 = 0 directly probes TRSB. The effect arises from the difference in the fluctuation spectrum of left- and right-polarized electromagnetic fields emanating from such materials. In the quantum Hall setting, the NV center experiences (nearly zero) large additional contribution to its relaxation due to the presence of the material when its magnetic dipole (anti)aligns with the external field. More generally, the difference in the relaxation rates is sensitive to the imaginary part of the wave-vector-dependent Hall conductivity. We argue that this can be used to determine the Hall viscosity, which can potentially distinguish candidate fractional quantum Hall states and be used to infer the pairing angular momentum in TRSB superconductors. We compute the average relaxation rate [Γ$_{+\hat{z}}$ + Γ$_{-\hat{z}}$] near thin film superconductors and find that it exhibits a Hebel-Slichter-like enhancement below 𝑇 𝑐 . The difference Γ$_{+\hat{z}}$ −Γ$_{-\hat{z}}$ also inherits this peak but is only nonzero for 𝑇 < 𝑇 𝑐 and only if the superconductivity is chiral. We provide concrete estimates for observing this effect in stacked twisted bismuth strontium calcium copper oxide flakes.

NV centers↗
DOE OSTI2019

Controlling spins with surface magnon polaritons

Polaritons in metals, semimetals, semiconductors, and polar insulators can allow for extreme confinement of electromagnetic energy, providing many promising opportunities for enhancing typically weak light-matter interactions such as multipolar radiation, multiphoton spontaneous emission, Raman scattering, and material nonlinearities. These extremely confined polaritons are quasielectrostatic in nature, with most of their energy residing in the electric field. As a result, these “electric” polaritons are far from optimized for enhancing emission of a magnetic nature, such as spin relaxation, which is typically many orders of magnitude slower than corresponding electric decays. Here, we take concepts of “electric” polaritons into magnetic materials, and propose using surface magnon polaritons in negative magnetic permeability materials to strongly enhance spin relaxation in nearby emitters. Specifically, we provide quantitative examples with MnF 2 and FeF 2 , enhancing spin transitions in the THz spectral range. In this work we find that these magnetic polaritons in 100-nm thin films can be confined to lengths over 10 000 times smaller than the wavelength of a photon at the same frequency, allowing for a surprising 12 orders of magnitude enhancement in magnetic dipole transitions. This takes THz spin-flip transitions, which normally occur at timescales on the order of a year, and forces them to occur at sub-ms timescales. Our results suggest an interesting platform for polaritonics at THz frequencies, and more broadly, a way to use polaritons to control light-matter interactions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Experimental observation of magnetic dimers in diluted Yb:YAlO 3

In this paper, we present a comprehensive experimental investigation of Yb magnetic dimers in Yb 0.04 Y 0.96 AlO 3 , an Yb-doped yttrium aluminum perovskite YAlO3, by means of specific heat, magnetization, and high-resolution inelastic neutron scattering (INS) measurements. In our sample, the Yb ions are randomly distributed over the lattice and ~7% of Yb ions form quantum dimers due to nearest-neighbor antiferromagnetic coupling along the c axis. At zero field, the dimer formation manifests itself in an appearance of an inelastic peak at Δ ≈ 0.2 meV in the INS spectrum and a Schottky-like anomaly in the specific heat. The structure factor of the INS peak exhibits a cosine modulation along the $L$ direction, in agreement with the $c$-axis nearest-neighbor intradimer coupling. A careful fitting of the low-temperature specific heat shows that the excited state is a degenerate triplet, which indicates a surprisingly small anisotropy of the effective Yb-Yb exchange interaction despite the low crystal symmetry and anisotropic magnetic dipole contribution, in agreement with previous reports for the Yb parent compound, YbAlO 3 , and in contrast to Yb 2 Pt 2 Pb. The obtained results are precisely reproduced by analytical calculations for the Yb dimers.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Evolution of non-Kramers doublets in magnetic field in PrNi 2 Cd 20 and PrPd 2 Cd 20

Praseodymium-based 1-2-20 cage compounds PrT 2 X 20 (T is generally Ti, V, Nb, Ru, Rh, Ir; and X is either Al, Zn, or Cd) provide yet another platform to study nontrivial electronic states of matter ranging from topological and magnetic orders to unconventional multipolar orders and superconductivity. In this paper, we report measurements of the electronic heat capacity in two Pr-based 1-2-20 materials: PrNi 2 Cd 20 and PrPd 2 Cd 20 . We find that the lowest-energy multiplet of the Pr 4f 2 valence configuration is a Γ 3 non-Kramers doublet and the first excited triplet is assumed to be a magnetic Γ 5 . By analyzing the dependence of the energy splitting between the ground and first excited singlet states on an external magnetic field, we found that the maximum in the heat capacity corresponding to the Schottky anomaly in PrPd 2 Cd 20 , unlike PrNi 2 Cd 20 , shows a pronounced linear dependence on an external magnetic field at higher field values. In conclusion, this effect is associated with the exchange interactions between the field-induced magnetic dipole moments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

{beta}- and {gamma}-spectroscopy study of {sup 119}Pd and {sup 119}Ag

Neutron-rich Pd-119 nuclei were produced in fission of natural uranium, induced by 25-MeV protons. Fission fragments swiftly extracted with the Ion Guide Isotope Separation On-Line method were mass separated using a dipole magnet and a Penning trap, providing mono-isotopic samples of Pd-119. Their beta(-) decay was measured with gamma gamma- and beta gamma-spectroscopy methods using low-energy germanium detectors and a thin plastic scintillator. Two distinct nuclear-level structures were observed in Ag-119, based on the 1/2(-) and 7/2(+) isomers reported previously. The beta(-)decay work was complemented by a prompt-gamma study of levels in Ag-119 populated in spontaneous fission of (252)cf, performed using the Gammasphere array of germanium detectors. Contrary to previous suggestions, our data show that the 1/2(-) isomer is located below the 7/2(+) isomer and is proposed as a new ground state of Ag-119 with the 7/2(+) isomer excitation energy determined to be 33.4 keV. Our data indicate that there are two beta unstable isomers in Pd-119, a proposed ground state of Pd-119 with tentative spin 1/2(-) or 3/2(+) and a half-life of 0.88 s and the other one about 350 keV above, having spin (11/2(-)) and a half-life of 0.85 s. The higher-energy isomer probably decays to the 1/2(-) or 3/2(+) ground state via a gamma cascade comprising 18.7-219.8-X-keV transitions. The unobserved isomeric transition with energy X approximate to 100 keV probably has an E3 multipolarity. Its hindrance factor is significantly lower than for analogous E3 isomeric transitions in lighter Pd isotopes, suggesting an oblate deformation of levels in Pd-119. Oblate configurations in Ag-119 are discussed also.

Kurpeta, J↗
DOE OSTI2022

Lifetime measurements of states of S 35 , S 36 , S 37 , and S 38 using the AGATA γ -ray tracking spectrometer

Lifetimes or lifetime limits of a small number of excited states of the sulfur isotopes with mass numbers A = 35 , 36, 37, and 38 have been measured using the differential recoil-distance method. The isotopes of sulfur were populated in binary grazing reactions initiated by a beam of 36 S ions of energy 225 MeV incident on a thin 208 Pb target which was mounted in the Cologne plunger apparatus. The combination of the PRISMA magnetic spectrometer and an early implementation of the AGATA γ-ray tracking array was used to detect γ rays in coincidence with projectile-like nuclear species. Lifetime measurements of populated states were measured within the range from about 1 to 100 ps. The number of states for which lifetime measurements or lifetime limits were possible was limited by statistics. For 35 S, the lifetime was determined for the first 1/2 + state at 1572 keV; the result is compared with a previous published lifetime value. The lifetime of the 3 - state of 36 S at 4193 keV was determined and compared with earlier measurements. No previous lifetime information exists for the (6 + ) state at 6690 keV; a lifetime measurement with large associated error was made in the present work. For 37 S, the states for which lifetime limits were established were those at 646 keV with J π = 3/2 - and at 2776 keV with J π = 11/2 - ; there are no previously published lifetime values for excited states of 37 S. Finally, a lifetime limit was established for the J π =(6 + ) state of 38 S at 3675 keV; no lifetime information exists for this state in the literature. Measured lifetime values were compared with the results of state-of-the-art shell-model calculations based on the PSDPF, SDPF-U, and FSU effective interactions. In addition, nuclear magnetic-dipole and electric-quadrupole moments, branching ratios, mixing ratios, and electromagnetic transition rates, where available, have been compared with shell-model values. The current work suffers from poor statistics; nevertheless, lifetime values and limits have been possible, allowing a useful discussion of the ability of state-of-the-art shell-model calculations to reproduce the experimental results.

electromagnetic transitions↗
DOE OSTI2023

Quasiparticle random-phase approximation calculations for M 1 transitions with the noniterative finite-amplitude method and application to neutron radiative capture cross sections

Here, we derive the equations of quasiparticle random-phase approximation (QRPA) based on the finite amplitude method with the Hartree-Fock+Bardeen–Cooper–Schrieffer (HF+BCS) single-particle states, and calculate the magnetic dipole (M⁢1) transition for deformed gadolinium isotopes. Our QRPA calculation shows both large spin-flip transitions in the 5 to 10 MeV excitation energy and the low energy orbital transition that would correspond to the M⁢1 scissors mode observed in nuclear experiments. Then, we calculate neutron capture reactions based on the statistical Hauser-Feshbach theory with the photoabsorption cross sections of even-even nuclei given by QRPA. We find that the capture cross section is enhanced due to the contribution from the low energy M⁢1 transition although the calculated capture cross section still underestimates the experimental data. This issue in the calculated capture cross section could be improved by uncertainties of the low energy E⁢1 transition neglected in our QRPA calculation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗