Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC MEMORY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

THE BUILDUP OF A SCALE-FREE PHOTOSPHERIC MAGNETIC NETWORK

We use a global Monte Carlo simulation of the formation of the solar photospheric magnetic network to investigate the origin of the scale invariance characterizing magnetic flux concentrations visible on high-resolution magnetograms. The simulations include spatially and temporally homogeneous injection of small-scale magnetic elements over the whole photosphere, as well as localized episodic injection associated with the emergence and decay of active regions. Network elements form in response to cumulative pairwise aggregation or cancellation of magnetic elements, undergoing a random walk on the sphere and advected on large spatial scales by differential rotation and a poleward meridional flow. The resulting size distribution of simulated network elements is in very good agreement with observational inferences. We find that the fractal index and size distribution of network elements are determined primarily by these post-emergence surface mechanisms, and carry little or no memory of the scales at which magnetic flux is injected in the simulation. Implications for models of dynamo action in the Sun are briefly discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Current-Induced Skyrmion Generation through Morphological Thermal Transitions in Chiral Ferromagnetic Heterostructures

Magnetic skyrmions promise breakthroughs in future memory and computing devices due to their inherent stability and small size. Their creation and current driven motion have been recently observed at room temperature, but the key mechanisms of their formation are not yet well-understood. Here it is shown that in heavy metal/ferromagnet heterostructures, pulsed currents can drive morphological transitions between labyrinth-like, stripe-like, and skyrmionic states. Using high-resolution X-ray microscopy, the spin texture evolution with temperature and magnetic field is imaged and it is demonstrated that with transient Joule heating, topological charges can be injected into the system, driving it across the stripe-skyrmion boundary. The observations are explained through atomistic spin dynamic and micromagnetic simulations that reveal a crossover to a global skyrmionic ground state above a threshold magnetic field, which is found to decrease with increasing temperature. It is demonstrated how by tuning the phase stability, one can reliably generate skyrmions by short current pulses and stabilize them at zero field, providing new means to create and manipulate spin textures in engineered chiral ferromagnets.

36 MATERIALS SCIENCE↗

Probing Defects and Spin‐Phonon Coupling in CrSBr via Resonant Raman Scattering

Abstract Understanding the stability limitations and defect formation mechanisms in 2D magnets is essential for their utilization in spintronic and memory technologies. Here, defects in mono‐ to multilayer CrSBr are correlated with structural, vibrational, and magnetic properties. Resonant Raman scattering is used to reveal distinct vibrational defect signatures. In pristine CrSBr, it is shown that bromine atoms mediate vibrational interlayer coupling, allowing for distinguishing between surface and bulk defect modes. Environmental exposure is shown to cause drastic degradation in monolayers, with the formation of intralayer defects. This is in contrast to multilayers that predominantly show bromine surface defects. Through deliberate ion irradiation, the formation of defect modes is tuned: these are strongly polarized and resonantly enhanced, reflecting the quasi‐‐1D electronic character of CrSBr. Strikingly, pronounced signatures of spin‐phonon coupling of the intrinsic phonon modes and the ion beam‐induced defect modes are observed throughout the magnetic transition temperature. Overall, defect engineering of magnetic properties is possible, with resonant Raman spectroscopy serving as a direct fingerprint of magnetic phases and defects in CrSBr.

2D magnetic semiconductors↗

Manipulation of magnetostructural transition and realization of prominent multifunctional magnetoresponsive properties in NiCoMnIn alloys

Promising multifunctional magnetoresponsive effects such as magnetoresistance, magnetostrain, and the magnetocaloric effect have recently been extensively studied in Ni-Mn-based metamagnetic shape memory alloys, but large reversible magnetoresponsive effects are usually obtained under high magnetic fields, which is an obstacle for practical applications. In this work, through manipulating magnetostructural transition, we achieved large reversible magnetoresponsive effects under a relatively low magnetic field of 3 T in a Ni-Co-Mn-In alloy. By systematically tuning the Mn/In ratio and Co substitution, an optimum composition Ni 49 Co 3 Mn 34 In 14 with a low thermal hysteresis (8 K), a narrow transformation interval (7 K) and a high sensitivity of transformation temperature to field change (6KT -1 ), was obtained. Good geometric compatibility between austenite and martensite was revealed by in situ synchrotron high-energy x-ray diffraction experiment, which accounts for the low hysteresis and narrow transformation interval. A reversible transformation between pure austenite and pure martensite is induced by a relatively low field of 3 T, which was directly evidenced by in situ neutron diffraction experiments. As a result, a large reversible magnetocaloric effect with entropy change of 16.5Jkg -1 K -1 , a large reversible magnetostrain of 0.26%, and a large reversible magnetoresistance of 60%, under a relatively low field of 3 T, were simultaneously achieved. These reversible magnetoresponsive effects are comparable to the maximum reversible values obtained under high fields in other Ni-Mn-based alloys, but the magnetic field we applied is much lower. This research may guide the design of metamagnetic shape memory alloys with low-field-induced magnetoresponsive properties for magnetic refrigeration, magnetic sensing, and magnetic recording applications.

36 MATERIALS SCIENCE↗

Giant field-like torque by the out-of-plane magnetic spin Hall effect in a topological antiferromagnet

Abstract Spin-orbit torques (SOT) enable efficient electrical control of the magnetic state of ferromagnets, ferrimagnets and antiferromagnets. However, the conventional SOT has severe limitation that only in-plane spins accumulate near the surface, whether interpreted as a spin Hall effect (SHE) or as an Edelstein effect. Such a SOT is not suitable for controlling perpendicular magnetization, which would be more beneficial for realizing low-power-consumption memory devices. Here we report the observation of a giant magnetic-field-like SOT in a topological antiferromagnet Mn 3 Sn, whose direction and size can be tuned by changing the order parameter direction of the antiferromagnet. To understand the magnetic SHE (MSHE)- and the conventional SHE-induced SOTs on an equal footing, we formulate them as interface spin-electric-field responses and analyzed using a macroscopic symmetry analysis and a complementary microscopic quantum kinetic theory. In this framework, the large out-of-plane spin accumulation due to the MSHE has an inter-band origin and is likely to be caused by the large momentum-dependent spin splitting in Mn 3 Sn. Our work demonstrates the unique potential of antiferromagnetic Weyl semimetals in overcoming the limitations of conventional SOTs and in realizing low-power spintronics devices with new functionalities.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Joule Heating Effect on Field-Free Magnetization Switching by Spin-Orbit Torque in Exchange-Biased Systems

Switching of magnetization via spin-orbit torque provides an efficient alternative for nonvolatile memory and logic devices. However, to achieve deterministic switching of perpendicular magnetization, an external magnetic field collinear with the current is usually required, which makes these devices inappropriate for practical applications. As such, in this work, we examine the current-induced magnetization switching in a perpendicularly magnetized exchange-biased Pt/CoFe/IrMn system. A magnetic field annealing technique is used to introduce in-plane exchange biases, which are quantitatively characterized. Under proper conditions, field-free current-driven switching is achieved.We study the Joule heating effect, and we show how it can decrease the in-plane exchange bias and degrade the field-free switching. Furthermore, we discuss that the exchange-bias training effect can have similar effects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic-field-induced transformation in FeMnGa alloys

A kind of ferromagnetic shape memory alloy with off-stoichiometric composition of Heusler alloy Fe{sub 2}MnGa has been synthesized. By optimizing composition, the martensitic transformation has been modified to occur at about 163 K accompanying spontaneous magnetization, which enables a magnetic field-induced structural transition from a paramagnetic parent phase to a ferromagnetic martensite with high magnetization of 93.8 emu/g. The material performs a quite large lattice distortion through the transformation, (c-a)/c=33.5%, causing a shape memory strain upto 3.6%. Such large lattice distortions strongly influence the electron structures, and thus some special physical behavior related to the transport and conductive properties is investigated.

36 MATERIALS SCIENCE↗

Perpendicular magnetic tunnel junction with thin CoFeB/Ta/Co/Pd/Co reference layer

Integration of high density spin transfer torque magnetoresistance random access memory requires a thin stack (less than 15 nm) of perpendicular magnetic tunnel junction (p-MTJ). We propose an innovative approach to solve this challenging problem by reducing the thickness and/or moment of the reference layer. A thin reference layer structure of CoFeB/Ta/Co/Pd/Co has 60% magnetic moment of the conventional thick structure including [Co/Pd] multilayers. We demonstrate that the perpendicular magnetization of the CoFeB/Ta/Co/Pd/Co structure can be realized by anti-ferromagnetically coupling to a pinned layer with strong perpendicular anisotropy via Ruderman-Kittel-Kasuya-Yosida exchange interaction. The pMTJ with thin CoFeB/Ta/Co/Pd/Co reference layer has a comparable TMR ratio (near 80%) as that with thick reference layer after annealing at 280 °C. The pMTJ with thin reference layer has a total thickness less than 15 nm, thereby significantly increasing the etching margin required for integration of high density pMTJ array on wafers with form factor of 300 mm and beyond.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Experimental and Theoretical Investigations of Magnetic Properties of Co Ferrite/Polyvinyl Alcohol Nanocomposites

Cobalt ferrite nanoparticles (NPs) have been synthesized by the modified co-precipitation technique in the presence of the polyvinyl alcohol (PVA) matrix. The structural and magnetic properties of NPs are tunable by means of interaction between the polymer and the surface of NPs. Magnetic properties of NPs were simulated using the accurate Monte Carlo (MC) method. In addition, the magnetic anisotropy constant has been obtained by means of the law of approach to saturation magnetization (LAS). The experimental and theoretical results are in good agreement with each other and show that the as-synthesized NPs are single domain and approximately non-interacting. The anisotropy constant and size of the NPs increase by increasing the concentration of precursors in the reaction medium. Nanocomposites have been characterized by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR). Hysteresis loops were investigated at room temperature using a vibrating sample magnetometer (VSM). The crystallite size of single-domain NPs is lower than 20 nm, and the obtained results from FT-IR confirmed the interaction between PVA and the surface of the particles. These approximately non-interacting NPs are useful for magnetic data storage.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructure, Phase Transformation, Mechanical Behavior, Bio-corrosion and Antibacterial Properties of Ti-Nb-xSn (x = 0, 0.25, 0.5 and 1.5) SMAs

Porous Ti-Nb-xSn shape memory alloys (SMAs) are fabricated by microwave sintering technology. The microstructures exhibit needle-like morphologies, β{sub (N)} (normal straight and crossed needles along with needle-like morphology that resembles spaghetti or irregular lines with α-phases in between) as well as plate-like morphologies [normal straight plate-like morphology, α′′ and dendritic plate-like morphology, β{sub (D)}]. Increases in Sn addition significantly induce an increase in the density of the α-phase. XRD patterns exhibited three phases, namely the β-main phase with smaller intensities of α′′ and α. Further, the addition of 0.25% Sn led to more effective improvement in the intensity of the α′′-phase compared with 0.5% and 1.5% Sn addition. Additions of Sn also enhanced the fracture strength and its corresponding strain along with the shape memory effect (SME), where the best enhancement was achieved at 0.25% Sn. The corrosion rate (Ri) was reduced by rising Sn content, while both corrosion resistance and antibacterial zones were increased. The lower elastic modulus, as well as the robust mechanical properties and bioactivity, made these SMAs rather suitable for biomedical application purposes, where the low elastic modulus had value in terms of avoiding the problem of “stress shielding.”.

36 MATERIALS SCIENCE↗

APOE effect on Alzheimer's disease biomarkers in older adults with significant memory concern

This study assessed apolipoprotein E (APOE) ε4 carrier status effects on Alzheimer's disease imaging and cerebrospinal fluid (CSF) biomarkers in cognitively normal older adults with significant memory concerns (SMC). Cognitively normal, SMC, and early mild cognitive impairment participants from Alzheimer's Disease Neuroimaging Initiative were divided by APOE ε4 carrier status. Diagnostic and APOE effects were evaluated with emphasis on SMC. Additional analyses in SMC evaluated the effect of the interaction between APOE and [ 18 F]Florbetapir amyloid positivity on CSF biomarkers. SMC ε4+ showed greater amyloid deposition than SMC ε4-, but no hypometabolism or medial temporal lobe (MTL) atrophy. SMC ε4+ showed lower amyloid beta 1-42 and higher tau/p-tau than ε4-, which was most abnormal in APOE ε4+ and cerebral amyloid positive SMC. Lastly, SMC APOE ε4+ show abnormal changes in amyloid and tau biomarkers, but no hypometabolism or MTL neurodegeneration, reflecting the at-risk nature of the SMC group and the importance of APOE in mediating this risk.

60 APPLIED LIFE SCIENCES↗

Detection of secondary phases in duplex stainless steel by magnetic force microscopy and scanning Kelvin probe force microscopy

The secondary phase transformations in a commercial super duplex stainless steel were investigated by micro-chemical analyses and high resolution scanning probe microscopy. Energy dispersive X-ray and electron probe detected ferrite and austenite as well as secondary phases in unetched aged duplex stainless steel type 25Cr-7Ni-3Mo. Volta potential indicated that nitride and sigma appeared more active than ferrite, while secondary austenite and austenite presented a nobler potential. Reversal order in nobility is thought to be attributable to the potential ranking provided by oxide nature diversity as a result of secondary phase surface compositions on steel. After eutectoid transformation, secondary austenite was detected by electron probe microanalysis, whereas atomic force microscopy distinguished this phase from former austenite by image contrast. Magnetic force microscopy revealed a “ghosted” effect on the latter microstructure probably derived from metal memory reminiscence of mechanical polishing at passivity and long range magnetic forces of ferrite phase. - Highlights: • Nobility detection of secondary phases by SKPFM in DSS particles is not a straightforward procedure. • As Volta potential and contrast are not always consistent SKPFM surface oxides is thought played an important role in detection. • AFM distinguished secondary austenite from former austenite by image contrast though SEM required EPMA.

36 MATERIALS SCIENCE↗

Core magnetic islands and plasma confinement in the H-1NF heliac

Plasma confinement in the vicinity of vacuum magnetic islands near the magnetic axis in the H-1NF heliac [S. M. Hamberger et al., Fusion Technol. 17, 123 (1990)] has been experimentally studied in a low temperature argon plasma. Experimental results indicate that, under favorable conditions, these low order (m=2) islands near the core of the plasma serve as 'pockets' of higher electron density. This results in significant profile modifications including enhancement of the core radial electric field to a large positive value, possibly through an electron-root ambipolar condition. The characteristics of islands are found to be dependent on the plasma collisionality and island width.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Observation of coupled vortex gyrations by 70-ps-time- and 20-nm-space-resolved full-field magnetic transmission soft x-ray microscopy

We employed time- and space-resolved full-field magnetic transmission soft x-ray microscopy to observe vortex-core gyrations in a pair of dipolar-coupled vortex-state Permalloy (Ni{sub 80}Fe{sub 20}) disks. The 70 ps temporal and 20 nm spatial resolution of the microscope enabled us to simultaneously measure vortex gyrations in both disks and to resolve the phases and amplitudes of both vortex-core positions. We observed their correlation for a specific vortex-state configuration. This work provides a robust and direct method of studying vortex gyrations in dipolar-coupled vortex oscillators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Oleate Coated Magnetic Cores Based on Magnetite, Zn Ferrite and Co Ferrite Nanoparticles - Preparation, Physical Characterization and Biological Impact on Helianthus Annuus Photosynthesis

Sodium oleate was used as coating shell for magnetite, Zn ferrite and Co ferrite powders to stabilize them in the form of aqueous magnetic suspensions. The physical characterization was carried out by applying X-ray diffraction and magnetization measurements. Both crystallite size and magnetic core diameter ranged between 7 and 11 nm. The influence of magnetic nanoparticle suspensions (corresponding to magnetic nanoparticle levels of 10{sup -14}-10{sup -15}/cm{sup 3}) on sunflower seedlings was studied considering the changes in the photosynthesis pigment levels. Similar responses were obtained for magnetite and cobalt ferrite nanoparticle treatment consisting in the apparent inhibition of chlorophyll biosynthesis while for zinc ferrite nanoparticles some concentrations seemed to have stimulatory effects on the chlorophylls as well as on the carotene levels. But the chlorophyll ratio was diminished in the case of all three types of magnetic nanoparticles meaning their slight negative effect on the light harvesting complex II (LHC II) from the chloroplast membranes and consequently on the photosynthesis efficiency.

36 MATERIALS SCIENCE↗

Electroresistance and field effect studies on manganite based heterostructure

Electronic properties of manganites are significantly important for various spintronic applications such as microelectronics, magnetic data storage, communication technologies, and memory devices. Influence of applied electric field on the room temperature charge transport in ZnO/La{sub 0.7}Sr{sub 0.3}MnO{sub 3}/SrNb{sub 0.002}Ti{sub 0.998}O{sub 3} (SNTO) heterostructure has been investigated using field effect studies. Large negative and positive electroresistance has been observed in heterostructure under various possible circuit geometries. Field effect studies have been carried out using three different circuit geometries, namely: (i) ZnO as a control electrode (E{sub LZ}), (ii) SNTO as a control electrode (E{sub LS}), and (iii) shorted ZnO and SNTO as control electrodes (E{sub LZS}). For this, channel electric field (E{sub CH}) dependent variation in channel resistance (R{sub C}) (of manganite channel) and I-V (across manganite channel) under various control fields (E{sub C}) have been studied. Variation in barrier height (Φ{sub B}) with control field (E{sub C}) for different geometries has been discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NEAR-INFRARED IMAGING POLARIMETRY OF THE SERPENS CLOUD CORE: MAGNETIC FIELD STRUCTURE, OUTFLOWS, AND INFLOWS IN A CLUSTER FORMING CLUMP

We made deep near-infrared (JHKs) imaging polarimetry toward the Serpens cloud core, which is a nearby, active cluster forming region. The polarization vector maps show that the near-infrared reflection light in this region mainly originates from SVS 2 and SVS 20, and enable us to detect 24 small infrared reflection nebulae associated with young stellar objects. Polarization measurements of near-infrared point sources indicate an hourglass-shaped magnetic field, of which the symmetry axis is nearly perpendicular to the elongation of the C{sup 18}O (J = 1-0) or submillimeter continuum emission. The bright part of C{sup 18}O (J = 1-0), submillimeter continuum cores as well as many Class 0/I objects are located just toward the constriction region of the hourglass-shaped magnetic field. Applying the Chandrasekhar and Fermi method and taking into account the recent study on the signal integration effect for the dispersion component of the magnetic field, the magnetic field strength was estimated to be {approx}100 {mu}G, suggesting that the ambient region of the Serpens cloud core is moderately magnetically supercritical. This suggests that the Serpens cloud core first contracted along the magnetic field as an elongated cloud, which is perpendicular to the magnetic field, and that the central part then contracted across the magnetic field due to the high density in the central region of the cloud core, where star formation is actively continuing. Comparison of this magnetic field with previous observations of molecular gas and large-scale outflows suggests a possibility that the cloud dynamics are controlled by the magnetic field, protostellar outflows, and gravitational inflows. Furthermore, the outflow energy injection rate appears to be larger than the dissipation rate of the turbulent energy in this cloud, indicating that the outflows are the main source of turbulence and that the magnetic field plays an important role both in allowing the outflow energy to escape from the central region of the cloud core and enabling the gravitational inflows from the ambient region to the central region. These characteristics appear to be in good agreement with the outflow-driven turbulence model and imply the importance of the magnetic field to continuous star formation in the center region of the cluster forming region.

79 ASTRONOMY AND ASTROPHYSICS↗

Superradiant scattering of electromagnetic waves emitted from disk around Kerr black holes

We study electromagnetic perturbations around a Kerr black hole surrounded by a thin disk on the equatorial plane. Our main purpose is to reveal the black hole superradiance of electromagnetic waves emitted from the disk surface. The outgoing Kerr-Schild field is used to describe the disk emission, and the superradiant scattering is represented by a vacuum wave field which is added to satisfy the ingoing condition on the horizon. The formula to calculate the energy flux on the disk surface is presented, and the energy transport in the disk-black hole system is investigated. Within the low-frequency approximation we find that the energy extracted from the rotating black hole is mainly transported back to the disk, and the energy spectrum of electromagnetic waves observed at infinity is also discussed.

79 ASTRONOMY AND ASTROPHYSICS↗