SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A magnetic ink composition for three-dimensional (3D) printing a bonded magnet is provided. The magnetic ink composition includes magnetic particles, a polymer binder and a solvent. A 3D printing method for fabrication of a bonded magnet using the magnetic ink composition is also provided.
Rapidly solidified Nd{sub 15}Fe{sub 77}B{sub 8} magnetic alloy powders have been produced by using melt-spinning method. Different wheel surface structures such as smooth and textured were tested to investigate the effect of wheel surface morphology on powder shape, microstructure, Curie temperature, and magnetic properties. Produced powders were subjected to surfactant-active ball-milling process for powder size reduction and to enhance magnetic and thermal properties. Generally, flaky-shaped powders were obtained with smooth surface wheels and spherical-shaped powders were produced with textured surface wheel. Microstructure of flaky-shaped powders consisted of polygonal fine equiaxed grains with an average grain size of 0.45 µm. Spherical-shaped powders had dendritic microstructure regardless of their sizes. Both flaky and spherical powders involved hard magnetic Nd{sub 2}Fe{sub 14}B phase located in the grain interior and a fine network of Nd-rich phase at the grain boundaries. Surfactant-active ball-milling process significantly contributed to magnetic and thermal properties of powders. The coercivity values of flaky-shaped powders milled for 90, 150, 210, 270, 330, and 390 min milling times were substantially higher than that of spherical-shaped powders milled for the same period of times. The Curie temperatures of Nd{sub 15}Fe{sub 77}B{sub 8} ingot alloy and spherical- and flaky-shaped powders were found as 279, 305, and 321 {sup ∘}C, respectively. On the other hand, the Curie temperatures of flaky- and spherical-shaped powders milled for 390 min were measured as 331 and 311 {sup ∘}C, respectively.
In this work, we discuss the relaxation of the magnetic moments in a novel carbon nanotube (CNT)-based nanocomposite synthesized by using chemical vapor deposition process. The material consists of a matrix of CNT filled by Fe-based nanoparticles. This structure is seen clearly by scanning and transmission. X-ray diffraction and Raman spectroscopy are used to detect the predominant Fe{sub 3}C phase and the CNT presence in the sample, respectively. The results obtained from both hysteresis cycles, M(H), and zero field cooled-field cooled (ZFC-FC) measurements confirm that the material is characterized by both a strong ferromagnetic exchange and random magnetic anisotropy. For the first time, we have been able to fit the magnetic relaxation data, M(t), by using both the two distributions of nanoparticles data deduced from the ZFC-FC data and the temperature dependence of the magnetic anisotropy obtained from the law of approach to saturation in random magnets. .
Magnetocaloric heat pumping near room temperature, a.k.a. magnetic cooling, relies on the active regenerator cycle to achieve functional temperature spans and realize economic and societal benefits promised by this emerging solid-state cooling technology. The cycle itself depends upon synchronizing oscillating flow of a heat transfer fluid through a solid porous active material matrix, or the refrigerant, with periods when the refrigerant is in the highest available (field-on) and in nearly zero (field-off) magnetic fields to accomplish heat transfer. With this in mind, in this work we analyze varying flow and magnetic field wave forms and the timing between when the fluid is pumped and when the magnetic field is turned on and off. We demonstrate that the volume and the cost of permanent magnet generating the field changes can be cut nearly in half with little to no effect on the device temperature span and cooling power normalized by the refrigerant mass.
Highlights: • Ferrite phase in a duplex stainless steel consists of stripe type domains. • Domain contrast decreases with deviation of plane normal from <100>. • Domain width increases with deviation of plane normal from <100>. • Domain alignment with applied field observed along <100> directions. • Grain boundary stray field is a function of misorientation between grains. - Abstract: The paper investigates the local micro-magnetization behavior in duplex stainless steel (DSS) using magnetic force microscopy (MFM). DSS has equal amount of austenite phase in ferrite matrix. The MFM imaging clearly differentiates ferrite phase (ferromagnetic) from the austenite phase (paramagnetic) due to the maze type magnetic domains present in the ferrite phase. The magneto crystalline anisotropic effect on the domain structure is discussed with the support of electron backscatter diffraction (EBSD) measurements. The MFM phase contrast and domain width are correlated with the orientation of surface normal with respect to the easy axis of magnetization (<100>). The influence of external magnetic field (±127 kA/m) application on the domain structure is studied as a function of the grain orientation and the leakage field at the grain boundaries is analyzed based on the mis-orientation between the grains.
Highlights: • ZnO and Yb doped ZnO are synthesized by co-precipitation method. • Rietvelt anlysis of XRD patterns confirms the complete substitution of Yb{sup 3+} in ZnO. • Vacancy and defect mediated RTFM is introduced in doped ZnO. • BMP model successfully analyze the magnetic property of Zn{sub 0.98}Yb{sub 0.02}O. - Abstract: Nanocrystalline ZnO and Yb-doped ZnO (Zn{sub 0.98}Yb{sub 0.02}O) are prepared by simple co-precipitation method. The pure crystallographic phases of ZnO and Zn{sub 0.98}Yb{sub 0.02}O are confirmed by Rietveld analyses of XRD patterns. Raman and photoluminescence spectra recorded at room temperature (RT) indicates that lattice defects and oxygen vacancy in Zn{sub 0.98}Yb{sub 0.02}O is more than that of ZnO. Magnetic measurements of ZnO and Zn{sub 0.98}Yb{sub 0.02}O are carried out from 300 to 5 K. Ferromagnetic ordering is observed in Zn{sub 0.98}Yb{sub 0.02}O at RT and the strength of the ordering increases with the lowering of temperature. Ferromagnetism of Zn{sub 0.98}Yb{sub 0.02}O is attributed to the oxygen vacancy introduced by annealing in vacuum. Magnetization vs. temperature curve is well fitted by the combination of 3D spin wave and Curie-Weiss law, which suggest simultaneous presence of para- and ferro-magnetic phases in Zn{sub 0.98}Yb{sub 0.02}O. Ferromagnetic ordering is successfully explained by vacancy mediated bound-magnetic polaron model.
We present a novel magnetic semiconductor, Cr 2.37 Ga 3 Se 8 , synthesized by partially replacing magnetic Cr 3+ in antiferromagnetic Cr 5+δ Se 8 with nonmagnetic Ga 3+ . The crystal structure of Cr 2.37 Ga 3 Se 8 was determined by both powder and single-crystal X-ray diffraction. The title compound crystallizes in a monoclinic structure with space group C2/m (No. 12). In Cr 2.37 Ga 3 Se 8 , the Cr atoms are surrounded by 6 Se atoms and form filled octahedral clusters, while Ga atoms are centered in the Se 4 tetrahedral clusters. The two kinds of clusters pack alternatingly along the c-axis, which results in a quasi-two-dimensional layered structure. The magnetization (M) measurement shows the development of short-range ferromagnetic coupling below the Curie-Weiss (CW) temperature θ CW ~ 92 K, evidenced by the nonlinear field dependence of M. However, the magnetic susceptibility exhibits a peak at low fields at ~18 K, indicating the existence of an antiferromagnetic interaction as well. Electronic structure calculations using the WIEN2k program in the local spin density approximation indicate that the magnetism arises exclusively from local moments of the Cr atoms. Here, the electrical resistivity measurement of the Cr 2.37 Ga 3 Se 8 sample confirms that this material is a semiconductor with the band gap ~0.26 eV. Meanwhile, the experimental band gap (~0.26 eV) is close to the theoretical prediction using the WIEN2k program (~0.35 eV).
The current progress in describing rare-earth-based magnets' electronic structure and magnetic properties is discussed. We use several currently popular electronic structure methods to show the typical values of critical parameters that define the physics of RECo 5 (RE = rare earth atom) materials. The magnetic moments and magnetic anisotropy of 4f atoms are obtained using several approaches, including anisotropic 4f-charge density-constrained DFT and DFT+HI methods. We also suggest the introduction of "penalty" functional for obtaining correct variational total energy in the traditional Hund's rule-constrained DFT-based techniques. The applicability and future extensions are discussed. The proposed combination of methods is potentially suitable for high-throughput computational searches of new rare-earth-containing magnetic materials.
Abstract not provided
SrCo 2 P 2 with a tetragonal structure is known to be a Stoner-enhanced Pauli paramagnetic metal being nearly ferromagnetic. Recently J. Schmidt et al. [Phys. Rev. B 108, 174415 (2023)] reported that a ferromagnetic ordered state is actually induced by a small Ni substitution for Co of x = 0.02 in Sr(Co 1–x Ni x ) 2 P 2 where an antiferromagnetic ordered phase also appears by further Ni substitution with x = 0.06–0.35. Here, in this work, using nuclear magnetic resonance (NMR) measurements on 31 P nuclei, we have investigated how the magnetic properties change by the Ni substitution in Sr(Co 1–x Ni x ) 2 P 2 from a microscopic point of view, especially focusing on the evolution of magnetic fluctuations with the Ni substitution and the characterization of the magnetically ordered states. The temperature dependencies of the 31 P spin-lattice relaxation rate divided by temperature (1/T 1 T) and Knight shift (K) for SrCo 2 P 2 are reasonably explained by a model where a double-peak structure for the density of states near the Fermi energy is assumed. Based on a Korringa ratio analysis using the T 1 and K data, ferromagnetic spin fluctuations are found to dominate in the ferromagnetic Sr(Co 1–x Ni x ) 2 P 2 as well as the antiferromagnets where no clear antiferromagnetic fluctuations are observed. We also found the distribution of the ordered Co moments in the magnetically ordered states from the analysis of the 31 P-NMR spectra exhibiting a characteristic rectangular-like shape.
Local strain-dependent spin-polarized electronic structure of a two-dimensional (2D) magnetic layer is an exciting property for practical applications. For example, it holds the promise for advanced ultrathin spintronic nanodevices with customized electronic and magnetic properties by local strain engineering. Here, we demonstrate that the spin-polarized electronic structure of a 2D manganese gallium nitride (MnGaN-2D) magnetic monolayer is sensitive to intrinsic local lattice strain, as proven by first-principles calculations and indicated by scanning tunneling spectroscopy measurements. Atomic resolution images reveal a highly non-Gaussian lattice spacing/strain distribution, while the spectroscopy reveals variations in the electronic density of states. Simulations of the MnGaN-2D monolayer based on first-principles calculations, including both isotropic and anisotropic strains, confirm a highly strain-dependent manganese partial density of states. Spin-orbit coupling is included which indicates either out-of-plane perpendicular magnetic anisotropy (PMA) or in-plane magnetic anisotropy, dependent on the type of strain whether compressive or tensile, suggesting that MnGaN-2D is magnetoelastic. The MnGaN-2D PMA is further supported by superconducting quantum interference device magnetometry measurements which reveal a high spin polarization of ~ 79 % at room temperature.
The effect of the fractal dimension of exchange-coupled clusters of magnetic nanoparticles on their magnetization curves is predicted by scaling estimates. These predictions form the basis for the experimental technique used for determining the fractal dimension of nanoparticle clusters from the magnetization curves. We estimate the reliability of determining the dimension by such methods with the help of micromagnetic simulation. It is shown that the effective dimension of magnetic correlation volumes, which is determined from analysis of the magnetization approaching saturation, is in conformity with the dimension of fractal clusters determined from analysis of their morphology. The dimension estimated from analysis of the coercive field on the particle size in a physically natural situation of the dipole–dipole interaction between nanoparticles provides estimates of the cluster dimension, which strongly differs from estimates obtained from analysis of their morphology.
Abstract—Magnetic force microscopy has been used to study the distribution of the magnetization in permalloy microparticles with a configurational anisotropy. The triangular particles with different degrees of concavity of the lateral sides have been studied. An analysis of the results enables us to state that the particles can be in several quasi-homogeneous stable states. It is shown that the particle magnetization reversal can occur both stepwise and also via an intermediate state in the dependence on the particle orientation. It is demonstrated that the quasi-homogeneous magnetization orientation in a particle can be changed by a magnetic-force microscope probe.
The comparison of the resonance magnetic absorption spectra with the data on structure and magnetic properties of Fe{sub 67}Cr{sub 18}B{sub 15} amorphous samples has shown that a randomly inhomogeneous medium of amorphous alloy is multiphase. Two types of samples with the same chemical composition, but with a different clusterized structure, and the use of (Ar{sup +}) ion irradiation in the experiment made it possible to separate four basic phases with different magnetic properties. The basic phase α-(Fe,Cr) contains large clusters of D < 400 Å in size with a tendency to phase separation of iron (α-Fe) and chromium (α-Cr), which under irradiation, enhances the competing FM and AFM magnetic interactions and increases the intensity of the resonance magnetic absorption lines associated with α-Fe and α-Cr. The phase Fe{sub 3}B (D < 100 Å) is detected by independent line in the resonance absorption spectra only when its groupings are isolated from the α-(Fe,Cr) metal phase clusters. The fourth phase contains precluster groupings and disappears when the sample is irradiated.
Strong magnetic fields in the magnetospheres of neutron stars (NSs) (especially magnetars) and other astrophysical objects may release their energy in violent, intense episodes of magnetic reconnection. While reconnection has been studied extensively, the extreme field strength near NSs introduces new effects: radiation cooling and electron–positron pair production. Using massively parallel particle-in-cell simulations that self-consistently incorporate these new radiation and quantum-electrodynamic effects, we investigate relativistic magnetic reconnection in the strong-field regime. We show that reconnection in this regime can efficiently convert magnetic energy to X-ray and gamma-ray radiation and thus power bright, high-energy astrophysical flares. Rapid radiative cooling causes strong plasma and magnetic field compression in compact plasmoids. In the most extreme cases, the field can approach the quantum limit, leading to copious pair production.
Stress-annealing (SA) is a novel secondary processing technique capable of significantly increasing magnetic anisotropy and controlling magnetic permeability in planar-cast amorphous precursor ribbons. In this technical memorandum, measures taken to improve the mechanical handling of brittle Fe-based ribbons are described for a custom SA system. This system was then used to process a series of Fe-based alloys (Fe-2Nb-2Mo-1Cu-15.5Si-7B at.%, Fe-5Co-3Ta-1Cu-16Si-6.5B at.%, and Fe-5Co-3Ta-1Cu-16.5Si-6B at.%) and the resulting magnetic properties were determined. The Fe-5Co-3Ta-1Cu-16.5Si-6B at.% alloy was found to be the most promising composition of the three in terms of surviving an optimized spool-to-spool continuous SA process under 90 MPa of tensile stress at 650 °C using a feed rate of 75.5 in/min, which equated to approximately 10 second anneal time. These optimally annealed ribbons exhibited flat hysteresis loops with a saturation magnetization of nearly 1.2 T, low magnetic coercivity (≈ 2 A m-1), and relative permeability of approximately 500.
High-temperature Active Magnetic Bearings (AMBs) are a promising alternative to conventional bearings in hermetically sealed turbomachinery for supercritical CO₂ (sCO₂) systems. They offer reduced CO₂ leakage, lower windage losses, enhanced misalignment tolerance, reduced wear, and built-in diagnostic capabilities. A critical challenge, however, is ensuring long-term material stability in harsh CO₂-rich environments. This study investigated the degradation behavior of permanent and soft magnetic materials (Alnico 9C, Alnico 5-7C, SmCo 18-T550, Hiperco-50, and coated variants) after up to 6,000 hours of exposure in gaseous CO₂, sCO₂, or air at 450 °C and 550 °C. The evaluation included post-exposure mass change measurements, scanning electron microscopy (SEM) analysis, and magnetic property assessments. The results demonstrate oxidation rates, microstructural evolution, and retention of magnetic performance across conditions. The findings offer essential insights into the thermal corrosion behavior of magnetic materials under CO₂ rich environments and serve as a reference for material selection in AMB system designs.
The thermodynamic and electronic-transport properties of trigonal EuMg 2 Bi 2 in ab-plane magnetic fields H x and the A-type antiferromagnetic structure have recently been reported. The Eu magnetic moments with spin S = 7/2 remain locked in the ab plane up to and above the ab-plane critical field $H^{c}_{x}$ = 27.5 kOe at which the Eu moments become parallel to H x . Here additional measurements at low fields are reported that reveal a new spin-reorientation transition at a field H c1 ≈ 465 Oe where the Eu moments remain in the ab plane but become perpendicular to H x . At higher fields, the moments cant toward the field resulting in M ∝ H x up to $H^{c}_{x}$. Similar results are reported from measurements of the magnetic properties of EuMg 2 Sb 2 single crystals, where H c1 ≈ 220 Oe is found. Theory is formulated that models the low-field magnetic behavior of both materials, and the associated anisotropies are calculated. Further, the ab-plane trigonal anisotropy in EuMg 2 Sb 2 is found to be significantly smaller than in EuMg 2 Bi 2 .