Search NASA⌕ Search

SEARCH · Search NASA

Results for “Magnetic superconductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Status and future plans for C 3 R&D

C 3 is an opportunity to realize an e + e - collider for the study of the Higgs boson at √s = 250 GeV, with a well defined upgrade path to 550 GeV while staying on the same short facility footprint. C 3 is based on a fundamentally new approach to normal conducting linear accelerators that achieves both high gradient and high efficiency at relatively low cost. Given the advanced state of linear collider designs, the key system that requires technical maturation for C 3 is the main linac. This paper presents the staged approach towards a facility to demonstrate C 3 technology with both Direct (source and main linac) and Parallel (beam delivery, damping ring, ancillary component) R&D. The primary goal of the C 3 Demonstration R&D Plan is to reduce technical and cost risk by building and operating the key components of C 3 at an adequate scale. This R&D plan starts with the engineering design, and demonstration of one cryomodule and will culminate in the construction of a 3 cryomodule linac with pre-production prototypes. This R&D program would also demonstrate the linac rf fundamentals including achievable gradient and gradient stability over a full electron bunch train and breakdown rates. It will also investigate beam dynamics including energy spread, wakefields, and emittance growth. This work will be critical to confirm the suitability of the C 3 beam parameters for the physics reach and detector performance in preparation for a Conceptual Design Report (CDR), as well as for follow-on technology development and industrialization. The C 3 Demonstration R&D Plan will open up significant new scientific and technical opportunities based on development of high-gradient and high-efficiency accelerator technology. It will push this technology to operate both at the GeV scale and mature the technology to be reliable and provide high-brightness electron beams. The timeline for progressing with C 3 technology development will be governed by practical limitations on both the technical progress and resource availability. It consists of four stages: Stage 0) Ongoing fundamental R&D on structure prototypes, damping and vibrations. Stage 1) Advancing the engineering maturity of the design and developing start-to-end simulations including space-charge and wakefield effects. This stage will include testing of strucutres operating at cryogenic temperatures. Beam tests would be performed with high beam current to test full beam loading. Stage 2) Production and testing of the first cryomodule at cryogenic temperatures. This would provide sufficient experimental data to compile a CDR and it is anticipated for Stage 2 to last 3 years and to culminate with the transport of photo-electrons through the first cryomodule. Stage 3) Updates to the engineering design of the cryomodules, production of the second and third cryomodule and their installation. Lower charge and lower emittance beams will be used to investigate emittance growth. The successful full demonstration of the 3 cryomodules to deliver up to a 3 GeV beam and achieve the C 3 five gradient will allow a comprehensive and robust evaluation of the technical design of C 3 as well as mitigate technical, schedule, and cost risks required to proceed with a Technical Design Report (TDR).

radiation hardened magnets↗
DOE OSTI2023

Terahertz EPR spectroscopy using a 36-tesla high-homogeneity series-connected hybrid magnet

Electron Paramagnetic Resonance (EPR) is a powerful technique to study materials and biological samples on an atomic scale. High-field EPR in particular enables extracting very small g-anisotropies in organic radicals and half-filled 3d and 4f metal ions such as Mn II (3d 5 ) or Gd III (4f 7 ), and resolving EPR signals from unpaired spins with very close g-values, both of which provide high-resolution details of the local atomic environment. Before the recent commissioning of the high-homogeneity Series Connected Hybrid magnet (SCH, superconducting + resistive) at the National High Magnetic Field Laboratory (NHMFL), the highest-field, high-resolution EPR spectrometer available was limited to 25 T using a purely resistive “Keck” magnet at the NHMFL. Herein, we report the first EPR experiments performed using the SCH magnet capable of reaching the field of 36 T, corresponding to an EPR frequency of 1 THz for g = 2. The magnet’s intrinsic homogeneity (25 ppm, that is 0.9 mT at 36 T over 1 cm diameter, 1 cm length cylinder) was previously established by NMR. We characterized the magnet’s temporal stability (5 ppm, which is 0.2 mT at 36 T over one-minute, the typical acquisition time) using 2,2-diphenyl-1-picrylhydrazyl (DPPH). This high resolution enables resolving the weak g-anisotropy of 1,3-bis(diphenylene)-2-phenylallyl (BDPA), Δg = 2.5 × 10 –4 obtained from measurements at 932 GHz and 33 T. Subsequently, we recorded EPR spectra at multiple frequencies for two Gd III complexes with potential applications as spin labels. In conclusion, we demonstrated a significant reduction in line broadening in Gd[DTPA], attributed to second order zero field splitting, and a resolution enhancement of g-tensor anisotropy for Gd[sTPATCN]-SL.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

First Field Measurements of the 15 T Nb 3 Sn Dipole Demonstrator MDPCT1

Within the US Magnet Development Program (MDP) a 15 T Nb 3 Sn dipole was developed, to demonstrate a magnet design for a post-LHC pp Collider. Specifically, the magnet design is based on 60 mm aperture 4-layer shell-type coils, graded between the inner and outer layers to maximize the magnet performance. The cable in the two innermost layers has 28 strands 1.0 mm in diameter and the cable in the two outermost layers has 40 strands 0.7 mm in diameter. Both cables use RRP Nb3Sn wires produced by Bruker-OST. Magnet coils are surrounded by vertically-split thick iron laminations, con-nected by aluminum I-clamps, and a thick stainless-steel skin. The magnet was tested at the Vertical Magnet Test Facility (VMTF) at Fermilab. This paper reports the first results of magnetic measure-ments of the 15 T Nb 3 Sn dipole demonstrator including geometrical harmonics, coil magnetization and iron saturation effects. The ex-perimental data are compared with the magnetic calculations.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Quench Performance of the First Pre-series AUP Cryo-assembly

The High Luminosity upgrade of the Large Hadron Collider (HL-LHC) at CERN will include eight cryo-assemblies that are expected to be fabricated and delivered to CERN by the US HL-LHC Accelerator Upgrade Project (AUP) as part of the U.S. contributions to the HL-LHC. These cryostat assemblies are the quadrupole magnetic components of the HL-LHC Q1 and Q3 inner triplet optical elements in front of the two interaction points. Each cryo-assembly consists of two 4.2 m long Nb 3 Sn quadrupole magnets with aperture 150 mm and operating gradient 132.6 T/m. The first pre-series cryo-assembly has been fabricated and successfully tested at the horizontal test facility at Fermi National Accelerator Laboratory. Here in this manuscript we report the quench test results of the LQXFA/B-01 cryo-assembly. The primary objective of the horizontal test is full cryo-assembly qualification and validation of the performance requirements.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Exploring superconductivity at the edge of magnetic or structural instabilities

Modern research of condensed matters devotes in understanding how properties of complex solids are determined by their structural and electronic degrees of freedom. In the last decade, the discovery of Fe-based high-temperature superconductors as well as the discovery of protected surface state in bulk materials arising from the non-trivial topological electronic structures have brought revolutionary breakthroughs, advancing our understanding of the interplay of structure, band topology, spin and charge degrees of freedom to a new level. Despite the exciting progresses, significant materials challenges remain. To address such challenges, our research funded by this award focuses on the design, synthesis and property characterization of two types of quantum materials. One is quasi-two-dimensional materials with structural/magnetic instability, the other is topological materials, especially the “ideal” ones where only minimum non-trivial bands exist at the Fermi level. The objective of our research is to design quantum materials that lie at the edge of structural/magnetic instabilities as well as the ones with non-trivial band topology, aiming at the discovery of quantum materials with emergent phenomena and the in-depth understanding of the entanglement of band topology and various degrees of freedoms through thermodynamic, transport, X-ray, and neutron measurements.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Quantum Engineering With Hybrid Magnonic Systems and Materials (Invited Paper)

Quantum technology has made tremendous strides over the past two decades with remarkable advances in materials engineering, circuit design and dynamic operation. In particular, the integration of different quantum modules has benefited from hybrid quantum systems, which provide an important pathway for harnessing the different natural advantages of complementary quantum systems and for engineering new functionalities. This review focuses on the current frontiers with respect to utilizing magnetic excitations or magnons for novel quantum functionality. Magnons are the fundamental excitations of magnetically ordered solid-state materials and provide great tunability and exibility for interacting with various quantum modules for integration in diverse quantum systems. The concomitant rich variety of physics and material selections enable exploration of novel quantum phenomena in materials science and engineering. In addition, the relative ease of generating strong coupling and forming hybrid dynamic systems with other excitations makes hybrid magnonics a unique platform for quantum engineering. We start our discussion with circuit-based hybrid magnonic systems, which are coupled with microwave photons and acoustic phonons. Subsequently, we are focusing on the recent progress of magnon-magnon coupling within confined magnetic systems. Next we highlight new opportunities for understanding the interactions between magnons and nitrogen-vacancy centers for quantum sensing and implementing quantum interconnects. Lastly, we focus on the spin excitations and magnon spectra of novel quantum materials investigated with advanced optical characterization.

42 ENGINEERING↗
DOE OSTI2021

Time-reversal symmetry breaking in the Fe-chalcogenide superconductors

Significance In the Fe-chalcogenide superconductors, topology, superconductivity, and magnetism all come together to provide a platform for a range of exotic quantum phenomena. Topology and superconductivity can interact to give topological superconductivity capable of supporting Majorana fermions that could prove to be the basis of future qubit technology. The large spin–orbit interaction associated with the topological phenomena combined with magnetism can potentially result in the quantum anomalous Hall effect although the superconductivity will work against such. It is important that we understand the relevant roles of the different phenomena. Here we provide evidence of time-reversal symmetry breaking and associated mass acquisition in a topological surface state at the superconducting transition, an observation highly suggestive of the formation of surface ferromagnetism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

General Failure Modes and Effects Analysis for Accelerator and Detector Magnet Design at JLab

The aim of this article is to develop a risk management procedure, which could be applied to the magnet design process, for both superconducting and normal magnets at the Jefferson Laboratory (JLab). This procedure allowed us to identify the key risks at each of the critical phases of design and propose procedures, tests, and checks to mitigate each risk. In this article, we present a qualitative and quantitative risk management procedure commonly referred to a “failure modes and effects analysis.” As part of this procedure, we calculated a risk priority number (RPN) for each activity of the process, identified the most critical activities and proposed mitigation activities, which in turn resulted in a revised RPN. Additionally, another benefit of this procedure was the identification of appropriate “control and hold” points within the design process, which allowed one to review and approve a particular outcome before proceeding to the next sequential activity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Monte Carlo study of the pseudogap and superconductivity emerging from quantum magnetic fluctuations

Abstract The origin of the pseudogap behavior, found in many high- T c superconductors, remains one of the greatest puzzles in condensed matter physics. One possible mechanism is fermionic incoherence, which near a quantum critical point allows pair formation but suppresses superconductivity. Employing quantum Monte Carlo simulations of a model of itinerant fermions coupled to ferromagnetic spin fluctuations, represented by a quantum rotor, we report numerical evidence of pseudogap behavior, emerging from pairing fluctuations in a quantum-critical non-Fermi liquid. Specifically, we observe enhanced pairing fluctuations and a partial gap opening in the fermionic spectrum. However, the system remains non-superconducting until reaching a much lower temperature. In the pseudogap regime the system displays a “gap-filling" rather than “gap-closing" behavior, similar to the one observed in cuprate superconductors. Our results present direct evidence of the pseudogap state, driven by superconducting fluctuations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Performance of low-loss demountable joints between CORC ® cable-in-conduit-conductors at magnetic fields up to 8 T developed for fusion magnets

Abstract High-temperature superconductors (HTS) are promising candidates for use in the high-field magnets needed in particle accelerators and fusion reactors. HTS conductor on round core (CORC ® ) cables and wires wound from ReBa 2 Cu 3 O 7- x (REBCO) coated tapes are being developed for use in high-field magnet applications including fusion magnets operating at currents beyond 80 kA, requiring them to be bundled into cable-in-conduit conductor (CICC) configurations. The use of HTS cables enable demountable superconducting fusion magnets that would allow easier access to the fusion machine for maintenance and parts replacement. Such demountable magnets require practical, low-resistance joints, capable of injecting current uniformly into the many REBCO tapes that make up different cable designs. Optimization steps on CORC ® cables have resulted in high-current terminations and joints with a joint resistance measured between a pair of 30-tape CORC ® cables of 51 nΩ at 76 K and 1.9 nΩ at 4 K. Demountable joints between CICCs consisting of six CORC ® cables arranged in flat and round configurations were also tested and compared to joints between low-temperature superconducting (LTS) CICCs consisting of NbTi Rutherford cables. Samples were paired into two configurations (LTS-to-LTS and HTS-to-HTS) with a demountable joint between them that were each tested in series with currents up to 10 000 A in an applied background magnetic field of up to 8 T. The total loop resistance of the HTS-to-HTS sample, including their terminations and joint, was about 4 nΩ at 4 K in self-field with the resistance of the copper pressed joint being less than 1 nΩ. At 8 T, the total loop resistance increased to 6.9 nΩ with the pressed joint contributing 1.4 nΩ. These initial tests prove the feasibility of producing remountable (dry) joints with low resistance between superconducting magnet windings in future compact fusion machines.

Physics↗
DOE OSTI2022

SuperScreen: An open-source package for simulating the magnetic response of two-dimensional superconducting devices

Quantitative understanding of the spatial distribution of magnetic fields and Meissner screening currents in two-dimensional (2D) superconductors and mesoscopic thin film superconducting devices is critical to interpreting the results of magnetic measurements of such systems. Here, we introduce SuperScreen, an open-source Python package for simulating the response of 2D superconductors to trapped flux and applied time-independent or quasi-DC magnetic fields for any value of the effective magnetic penetration depth, Λ. Given an applied magnetic field, SuperScreen solves the 2D London equation using an efficient matrix inversion method to obtain the Meissner currents and magnetic fields in and around structures composed of one or more superconducting thin films of arbitrary geometry with spatially nonuniform magnetic penetration depth. SuperScreen can be used to model screening effects and calculate self- and mutual-inductance in superconducting devices, and simulate the magnetic response of inhomogeneous 2D superconductors.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Pearl vortices in anisotropic superconducting films

The magnetic field of vortices in anisotropic superconducting films is considered in the framework of anisotropic London approach. It is found that at distances large relative to the core size, the magnetic field normal to the film surface may change sign. Here, we find that the magnetic field attenuates at large distances as 1/r 3 as it does in isotropic films, but the anisotropy induces an angular dependence to the supercurrents which causes the sign of the field to change for anisotropy parameters γ = λ 2 /λ 1 > $\sqrt{2}$ in some parts of the (x, y) plane.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Enhanced spin-triplet pairing in magnetic junctions with s -wave superconductors

A common path to superconducting spintronics, Majorana fermions, and topologically protected quantum computing relies on spin-triplet superconductivity. While naturally occurring spin-triplet pairing is elusive, and even common spin-triplet candidates, such as Sr 2 RuO 4 , support alternative explanations, proximity effects in heterostructures can overcome these limitations. It is expected that robust spin-triplet superconductivity in magnetic junctions should rely on highly spin-polarized magnets or complex magnetic multilayers. Instead, we predict that the interplay of interfacial spin-orbit coupling and the barrier strength in simple magnetic junctions, with only a small spin polarization and s -wave superconductors, can lead to nearly complete spin-triplet superconducting proximity effects. This peculiar behavior arises from an effective perfect transparency: interfacial spin-orbit coupling counteracts the native potential barrier for states of a given spin and wave vector. We demonstrate that the enhanced spin-triplet regime is characterized by a huge increase in conductance magnetoanisotropy, orders of magnitude larger than in the normal state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Scanning SQUID microscopy in a cryogen-free dilution refrigerator

We report a scanning superconducting quantum interference device (SQUID) microscope in a cryogen-free dilution refrigerator with a base temperature at the sample stage of at least 30 mK. The microscope is rigidly mounted to the mixing chamber plate to optimize thermal anchoring of the sample. The microscope housing fits into the bore of a superconducting vector magnet, and our design accommodates a large number of wires connecting the sample and sensor. Through a combination of vibration isolation in the cryostat and a rigid microscope housing, we achieve relative vibrations between the SQUID and the sample that allow us to image with micrometer resolution over a 150 μm range while the sample stage temperature remains at base temperature. To demonstrate the capabilities of our system, we show images acquired simultaneously of the static magnetic field, magnetic susceptibility, and magnetic fields produced by a current above a superconducting micrometer-scale device.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Topological superconductivity induced by a triple- q magnetic structure

Here we demonstrate that the recently discovered triple- q (3 q ) magnetic structure, when embedded in a magnet-superconductor hybrid (MSH) system, gives rise to the emergence of topological superconductivity. We investigate the structure of chiral Majorana edge modes at domain walls, and show that they can be distinguished from trivial in-gap modes through the spatial distribution of the induced supercurrents. Finally, we show that topological superconductivity in 3 q MSH systems is a robust phenomenon that does not depend on the relative alignment of the magnetic and superconducting layers, or on the presence of electronic degrees of freedom in the magnetic layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Residual loss due to magnetic flux trapping in niobium superconducting microwave cavities

One of the significant source of radio frequency loss in superconducting microwave cavities is the trapped residual magnetic field during the cooldown due to the incomplete Messier effect. The sensitivity of flux trapping depends on the distribution of impurities, network of dislocations and defects which pin vortices. Recent advancement in cavity processing techniques resulted in very high quality factors with impurity doping, however the rf loss related to the flux trapping increases. High quality factor in SRF cavities is not only limited to particle accelerators but also emerging as an application to quantum computing and quantum information science. In this presentation, we present the results of measurements of flux trapping sensitivity on several 1.3 GHz elliptical accelerating cavities with different grain size, impurity content and surface preparations.

Dhakal, P.↗
DOE OSTI2022

Multiple magnetic orders in LaFeAs 1-x P x O uncover universality of iron-pnictide superconductors

The iron-pnictide superconductors have generated tremendous excitement as the competition between magnetism and superconductivity has allowed unique in-roads towards elucidating a microscopic theory of unconventional high-temperature superconductivity. In addition to the stripe spin density wave ($C^a_{2M}$) phase observed in the parent compounds of all iron-pnictide superconductors, two novel magnetic orders have recently been discovered in different parent structures: an out-of-plane collinear double-Q ($C^c_{4M}$) structure in the hole-doped (Ca, Sr, Ba) 1-x (Na) x Fe 2 As 2 and Ba 1-x K x Fe 2 As 2 families, and a spin vortex crystal “hedgehog” ($C^{ab}_{4M}$) structure in the CaKFe 4 As 4 family. Using neutron diffraction, we demonstrate that LaFeAs 1-x P x O contains all three magnetic orders within a single-phase diagram as a function of substitution, all of which compete strongly with superconductivity. Our experimental observations combined with theoretical modeling demonstrate how the reduction in electronic correlations by chemical substitution results in larger Fermi surfaces and the sequential stabilization of multiple magnetic anisotropies. Our work presents a unified narrative for the competing magnetic and superconducting phases observed in various iron-pnictide systems with different crystal structures and chemistry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗