Search NASA⌕ Search

SEARCH · Search NASA

Results for “Main group”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

An isotopic labeling investigation into the influence of the nitro group on LLM-105 thermal decomposition

Here, this work presents the first application of isotopically labeled LLM-105 (2,6-diamino-3,5-dinitropyrazine-1-oxide) to investigate thermal decomposition pathways. Specially synthesized LLM-105 isotopologues were utilized to isolate the influence of labeled 15 NO 2 nitro groups on the formation of lightgas products. Simultaneous differential scanning calorimetry, thermo-gravimetric, and mass spectrometry measurements were employed to track the evolution of product gases, enabling the direct comparison of isotopically shifted species with unlabeled LLM-105. Key findings show that C 2 N 2 production is mainly dependent on nitrogen sources from either the amine groups or the pyrazine ring (i.e., not the nitro groups). The formation of NO, N 2 , and N 2 O all involves the nitro groups to some extent. NO (nitric oxide) was found to be the predominant gas species directly formed from the nitro group of LLM-105. In contrast, mixed nitrogen isotopologues of N 2 and N 2 O (i.e., 14 N 15 N and 15 NNO) formed more readily in comparison to their pure counterparts (i.e., 15 N 2 and 15 N 2 O). This indicates the amine and/or pyrazine groups of LLM-105, in addition to the nitro group, are involved in the decomposition pathways forming N 2 and N 2 O. In addition, our investigation led to the discovery of two previously unreported decomposition products (CHO and HNCO), which were confirmed through hydrogen labelling utilizing deuterium isotopes. These results provide detailed speciation trends of gaseous products during LLM-105 decomposition, offering new insights into reaction pathways. Experimental data reported here will support the development of a detailed chemical kinetics model for LLM-105, essential for the safe handling of high explosives.

Chemistry - Chemical explosives↗
NASA NTRS1991

The design of two-stage-to-orbit vehicles

Two separate student design groups developed conceptual designs for a two-stage-to-orbit vehicle, with each design group consisting of a carrier team and an orbiter team. A two-stage-to-orbit system is considered in the event that single-stage-to-orbit is deemed not feasible in the foreseeable future; the two-stage system would also be used as a complement to an already existing heavy lift vehicle. The design specifications given are to lift a 10,000-lb payload 27 ft long by 10 ft diameter, to low Earth orbit (300 n.m.) using an air breathing carrier configuration that will take off horizontally within 15,000 ft. The staging Mach number and altitude were to be determined by the design groups. One group designed a delta wing/body carrier with the orbiter nested within the fuselage of the carrier, and the other group produced a blended cranked-delta wing/body carrier with the orbiter in the more conventional piggyback configuration. Each carrier used liquid hydrogen-fueled turbofanramjet engines, with data provided by General Electric Aircraft Engine Group. While one orbiter used a full-scale Space Shuttle Main Engine (SSME), the other orbiter employed a half-scale SSME coupled with scramjet engines, with data again provided by General Electric. The two groups conceptual designs, along with the technical trade-offs, difficulties, and details that surfaced during the design process are presented.

Source record↗
NASA NTRS1989

A dual-armed free flyer

This summary presents the main conclusions and results of the design studies conducted by a group of 13 students at the University of Maryland. The students, all participants in the spring 1989 course ENEE418 in the Electrical Engineering Department, met weekly in a two-hour class to discuss and evaluate design alternatives. The main problem considered was the design and control of a planar testbed simulating a free-flying space robot for applications in satellite servicing. This project grew out of the 1988 class where a dual-armed free flyer (DAFF) was designed and partially built. This year, a group of six students continued the development of the DAFF, achieving computer-controlled motion of the DAFF's arms. All fabrication and testing of the DAFF is being conducted in the Intelligent Servosystems Laboratory at the University of Maryland. While the work related to the design and development of the DAFF is the main subject of the report, it should be noted that other students in the ENEE418 class have investigated additional issues related to manipulation in space. For example, one group studied a new parallel linkage based manipulator for fine motion applications such as in assembly operations in space. They investigated the mechanism's kinematics, its reachable workspace, and precision of applying forces and torques. In yet another project, a student set out to measure and map the friction characteristics of the actuators used in the Modular Dextrous Hand, which has been recently developed in the Intelligent Servosystems Laboratory. The results are expected to help compensate for this friction, which is a highly nonlinear disturbance and presents significant problems in high-precision, low-speed operations. This summary continues with the discussion of the results obtained by the group of students who have been working on developing the DAFF testbed.

Beck, D.↗
NASA NTRS1997

The Evolution of Energy-Transducing Systems. Studies with an Extremely Halophilic Archaebacterium

The F-type ATPases are found in remarkably similar versions in the energy-transducing membranes of bacteria, chloroplasts and mitochondria (1). Thus, it is likely that they have originated early in the evolution of life, which is consistent with their function as key enzymes of cellular metabolism. The archaea (formerly called archaebacteria) are a group of microorganisms which, as shown by molecular sequencing and biochemical data, have diverged early from the main line of prokaryotic evolution (2). From studies of members of all three major groups of archaea, the halophiles, methanogens and thermoacidophiles, it emerged that they possess a membrane ATPase, which differs from the F-ATPases. The goal of this project was a comparison of the ATPase from the halophilic archaebacterium Halobacterium saccharovorum with the well-characterized F-type ATPases on the molecular level. The results were expected to allow a decision about the nature of archaebacterial ATPases, their classification as one of the known or, alternatively, novel enzyme complex, and possibly a deduction of events during the early evolution of energy-transducing systems.

Stan-Lotter, Helga↗
DOE OSTI2020

Choosing the Best Modeling Platform for Radiological Risk Assessment Models - 20468

Radiological risk assessments, in the form of performance or safety assessments, are often required under regulations or guidance for remediation of contaminated land, decommissioning of contaminated buildings or structures, and radioactive waste disposal. These risk assessments are usually supported by fate and transport models that address decay and ingrowth of radionuclides, as well as their movement through engineered systems and the natural environment. These models are often projected thousands, or more, years into the future, largely because the radioactive species change through decay and ingrowth, and hence the magnitude of the radioactive effect changes with time. There are many computer codes that are available to address this type of modeling. They range from addressing specific pathways or processes such as infiltration of water, groundwater, surface water, air, biota, diffusion and advection of water and gases, to those that try to couple all processes together to evaluate the impact of fate and transport through the entire system to places in space and time to which access is assumed. These different types of codes are sometimes separated with the monikers process-level and systems-level codes, although it is often not clear that this separation does justice to the capabilities of the many codes that are available to evaluate fate and transport of radionuclides. The focus of this paper is the latter group of modeling codes. Several systems level modeling codes exist and are used. There are differences between these codes in terms of utility, flexibility, complexity and cost. The purpose of this paper is to compare a few of these codes in the context of work currently being performed by the International Atomic Energy Agency (IAEA) Modeling and Data for Radiological Impact Assessments (MODARIA) II Working Group 1 (WG1). The MODARIA II WG1's main focus is how stakeholder engaged decision analysis can, or should, be applied to radiological contamination problems so that better, longstanding, sustainable, solutions are reached. However, the WG1 also recognizes the potential impact of the modeling tools that are chosen to address radiological risk, which is often a primary objective of decision making for radiological problems. Other objectives might also be important, such as constraining costs, obtaining financing, minimizing impact on ecosystems, saving cultural resources, saving jobs, farmland, environmental justice, etc., in a full decision analysis for a given radiological contamination problem, but none of these other objectives have the same types of complex modeling needs as minimize radiological dose. Consequently, a further focus of WG1 is to evaluate the potential impacts on decision making of the choice of fate and transport, and risk assessment, modeling codes that are used to support decision making. The WG1 will produce a report at the end of 2020 that will focus on an approach to effective decision making and stakeholder engagement. The report will also consider the role that performance assessment modeling should play in the decision-making process, including the impact of the choice of modeling tools or computer codes on risk-informed decision making. Several sites around the World have been made available by Member States for these model comparisons, and several modeling tools have been considered. However, the focus of this paper is on two of the sites, one in Belgium and one in Ukraine, and on three of the tools: NORMALYSA (NORM And Legacy Site Assessment); GoldSim{sup C}, and AMBER{sup C}. The final report from this working group will also cover other modeling tools, including RESRAD, and PC-Cream{sup R}. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

AP-XPS Study of the Reaction of O 2 and CO 2 with Zn–Au(111) Surface Alloys: Activation of O–O/C–O Bonds and the Formation of ZnO

Synchrotron-based ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) was used to study the dissociation of O 2 and CO 2 on Zn-Au(111) alloys which contained 0.2-0.3 monolayers of zinc. Although Au(111) is inert, the alloys displayed a high activity for the cleavages of O-O and C-O bonds at room temperature with the formation of ZnO x species. Dissociative adsorption of O 2 at 300 K destroyed the alloys and the results of AP-XPS pointed to the co-existence of two types of oxygen species on the surface: ZnO x and chemisorbed O atoms (O chem ) on Au or the Au-ZnO interface. Annealing from room temperature to 600 K induced a O chem → ZnO x transformation that reflected the poor stability of O atoms on Au(111). The Zn-Au(111) systems exhibited a reactivity towards CO 2 that was much larger than that seen for Au(111), Cu(111) or surfaces of late transition metals like, Ni, Pd or Pt. At 300 K, CO 2 underwent partial dissociation depositing large amounts of O chem on the surface with minor formation of ZnO x . In addition, the deposited O chem reacted with CO 2 to form surface carbonate groups. Dosing of CO 2 at 500-600 K mainly led to the formation of ZnO x and the surface carbonate almost disappeared. In the presence of hydrogen, i.e. reaction feeds with a CO 2 to H 2 ratio of 1:3, the surface chemistry at 300 K was very similar to that seen for pure CO 2 with the formation of ZnO x and carbonate groups. In contrast, at 500-600 K, reaction with hydrogen induced the removal of ZnO x and CO 3 /HCOO species. Finally, our AP-XPS results are consistent with the idea that CO 2 hydrogenation on AuZn alloys involves a redox process where there is sequential oxidation by CO 2 and reduction by H 2 to yield methanol.

36 MATERIALS SCIENCE↗
NASA NTRS1994

Increased walking variability in elderly persons with congestive heart failure

OBJECTIVES: To determine the effects of congestive heart failure on a person's ability to walk at a steady pace while ambulating at a self-determined rate. SETTING: Beth Israel Hospital, Boston, a primary and tertiary teaching hospital, and a social activity center for elderly adults living in the community. PARTICIPANTS: Eleven elderly subjects (aged 70-93 years) with well compensated congestive heart failure (NY Heart Association class I or II), seven elderly subjects (aged 70-79 years) without congestive heart failure, and 10 healthy young adult subjects (aged 20-30 years). MEASUREMENTS: Subjects walked for 8 minutes on level ground at their own selected walking rate. Footswitches were used to measure the time between steps. Step rate (steps/minute) and step rate variability were calculated for the entire walking period, for 30 seconds during the first minute of the walk, for 30 seconds during the last minute of the walk, and for the 30-second period when each subject's step rate variability was minimal. Group means and 5% and 95% confidence intervals were computed. MAIN RESULTS: All measures of walking variability were significantly increased in the elderly subjects with congestive heart failure, intermediate in the elderly controls, and lowest in the young subjects. There was no overlap between the three groups using the minimal 30-second variability (elderly CHF vs elderly controls: P < 0.001, elderly controls vs young: P < 0.001), and no overlap between elderly subjects with and without congestive heart failure when using the overall variability. For all four measures, there was no overlap in any of the confidence intervals, and all group means were significantly different (P < 0.05).

NASA Discipline Cardiopulmonary↗
DOE OSTI2022

Smectic C Self‐Assembly in Mesogen‐Free Liquid Crystalline Chiral Polyethers with Sulfonylated Methyl‐Branched Side Chains

Abstract To realize advanced electrical applications for ferroelectric liquid crystalline polymers, high spontaneous polarization ( P s ) is highly desired. However, current ferroelectric liquid crystalline polymers usually exhibit a low P s . In this work, mesogen‐free, chiral polyethers containing sulfonylated methyl‐branched alkyl side chains with a (CH 2 ) 3 O spacer between the sulfonyl and the branched alkyl groups are designed and synthesized. In contrast to the linear n ‐alkyl side chains, the methyl‐branched alkyl side chains induce chain tilting in the smectic layers. When double chirality exists in both the main chain and the side chains, a crystalline structure is observed after mechanical stretching. Intriguingly, when single chirality exists in either the backbone or the side chains, a liquid crystalline smectic C phase is obtained. The electric displacement–electric field study, however, does not show typical ferroelectric switching, although the dielectric constants are relatively high for these liquid crystalline polymers. This is likely because the dipole–dipole interactions among neighboring sulfonyl groups along the main chain are so strong that the ferroelectric switching is hindered in the samples. For the future work, it is desired to weaken the dipole–dipole interaction to achieve ferroelectricity in these mesogen‐free liquid crystalline polymers.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Performance enhancement and degradation mechanism identification of a single-atom Co–N–C catalyst for proton exchange membrane fuel cells

Development of platinum group metal (PGM)-free catalysts for oxygen reduction reaction (ORR) has been a strategic research topic for proton exchange membrane (PEM) fuel cells. Present state-of-art PGM-free ORR catalysts are Fe, N co-doped carbon (Fe-N-C) catalysts, which unfortunately exhibit instability concerns. Herein, we report a stable atomically dispersed Co, N co-doped carbon (Co-N-C) catalyst with high Co content of 1.0 at% and the active site, i.e., the coordination of Co, is CoN2+2 in nature. The Co-N-C catalyst demonstrated high ORR activity comparable to, and high stability over 3 times better than, that of the Fe-N-C catalyst. It also achieved a high activity of 22 mA cm2 at 0.9 ViR-free and a power density of 0.61 W cm-2 under 1.0 bar H2/O2. Further, we identify two main degradation mechanisms of the PGM-free catalysts: catalyst oxidation by H2O2/radicals and demetalation. The improved stability of Co-N-C relative to Fe-N-C is attributed to less Fenton-reactive nature of Co and significantly enhanced resistance to demetalation of Co-N-C.

Xie, Xiaohong↗
DOE OSTI2021

Structure and Potential–Dependent Selectivity in Redox–Metallopolymers: Electrochemically Mediated Multicomponent Metal Separations

Electro-responsive functional materials can play a critical role in selective metal recovery and recycling due to the need for molecular differentiation between transition metals in complex mixtures. Redox-active metallopolymers are a promising platform for electrochemical separations, offering versatile structural tuning and fast electron transfer. First, through a judicious selection of polymer structure between a main-chain metallopolymer (polyferrocenylsilane) and a pendant-group metallopolymer (polyvinylferrocene), charge-transfer interactions and binding strength toward competing metal ions are tuned, which as a result, dictate selectivity. For example, almost an order of magnitude increase in separation factor between chromate and meta-vanadate can be achieved, depending on polymer structure. Second, these metallopolymer electrodes exhibit potential-dependent selectivity that can even flip ion preference, based solely on electrical means—indicating a control parameter that is orthogonal to structural modifications. Finally, this work presents a framework for evaluating electrochemical separations in multicomponent ion mixtures and elucidates the underlying charge-transfer mechanisms resulting in molecular selectivity through a combination of spectroscopy and electronic structure calculations. Furthermore, the findings demonstrate the applicability of redox-metallopolymers in tailored electrochemical separations for environmental remediation, value-added metal recovery, waste recycling, and even mining processing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Toward More Efficient Organic Solar Cells: A Detailed Study of Loss Pathway and Its Impact on Overall Device Performance in Low‐Offset Organic Solar Cells

Abstract Low‐offset organic solar cell systems have attracted great interest since nonfullerene acceptors came into the picture. While numerous studies have focused on the charge generation process in these low‐offset systems, only a few studies have focused on the details of each loss channel in the charge generation process and their impact on the overall device performance. Here, several nonfullerene acceptors are blended with the same polymer donor to form a series of low‐offset organic solar cell systems where significant variation in device performance is observed. Through detailed analyses of loss pathways, it is found that: i) the donor:acceptor interfaces of PM6:Y6 and PM6:TPT10 are close to the optimum energetic condition, ii) energetics at the donor:acceptor interface are the most important factor to the overall device performance, iii) exciton dissociation yield can be field‐dependent owing to the sufficiently small energetic offset at the donor:acceptor interface, and iv) the change in substituents in the terminal group of Y‐series acceptors in this work mainly affects energetics at the donor:acceptor interface instead of the interface density in the active layer. In general, this work presents a path toward more efficient organic solar cells.

14 SOLAR ENERGY↗
DOE OSTI2026

Expected sensitivity of the Light Dark Matter eXperiment to long-lived dark photons and axion-like particles

The Light Dark Matter eXperiment (LDMX) is an electron-beam fixed-target experiment primarily designed to achieve world-leading, model-independent sensitivity to sub-GeV dark matter particles. LDMX aims to identify dark sector particle production through the detection of events with substantial missing energy and momentum, a signature of invisible particles escaping detection. Beyond this primary objective, LDMX offers a complementary search strategy for long-lived, visibly decaying particles, such as dark photons and axion-like particles. We present the first detailed evaluation of the ability of LDMX to identify visibly decaying, long-lived particles that couple to electrons using a detailed simulation, based on the Geant 4-toolkit, that incorporates realistic detection efficiencies and background levels. We demonstrate that LDMX can achieve a sensitivity that is competitive with other experiments that are currently running. The models explored in this paper are distinct and complementary to those probed in the LDMX flagship missing-momentum analysis. Through searching for both invisible dark matter and visibly decaying long-lived signatures, LDMX will significantly advance the search for light dark matter and provide a broad exploration of the sub-GeV dark sector.[graphic not available: see fulltext]

Akesson, Torsten [Lund U.] (ORCID:0000000341415408↗
DOE OSTI2022

Low-synch Gram–Schmidt with delayed reorthogonalization for Krylov solvers

The parallel strong-scaling of iterative methods is often determined by the number of global reductions at each iteration. Low-synch Gram-Schmidt algorithms are applied here to the Arnoldi algorithm to reduce the number of global reductions and therefore to improve the parallel strong-scaling of iterative solvers for nonsymmetric matrices such as the GMRES and the Krylov-Schur iterative methods. In the Arnoldi context, the factorization is "left-looking" and processes one column at a time. Among the methods for generating an orthogonal basis for the Arnoldi algorithm, the classical Gram-Schmidt algorithm, with reorthogonalization (CGS2) requires three global reductions per iteration. A new variant of CGS2 that requires only one reduction per iteration is presented and applied to the Arnoldi algorithm. Delayed CGS2 (DCGS2) employs the minimum number of global reductions per iteration (one) for a one-column at-a-time algorithm. The main idea behind the new algorithm is to group global reductions by rearranging the order of operations. DCGS2 must be carefully integrated into an Arnoldi expansion or a GMRES solver. Numerical stability experiments assess robustness for Krylov-Schur eigenvalue computations. Performance experiments on the ORNL Summit supercomputer then establish the superiority of DCGS2 over CGS2.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Genome-scale model development and genomic sequencing of the oleaginous clade Lipomyces

The Lipomyces clade contains oleaginous yeast species with advantageous metabolic features for biochemical and biofuel production. Limited knowledge about the metabolic networks of the species and limited tools for genetic engineering have led to a relatively small amount of research on the microbes. Here, a genome-scale metabolic model (GSM) of Lipomyces starkeyi NRRL Y-11557 was built using orthologous protein mappings to model yeast species. Phenotypic growth assays were used to validate the GSM (66% accuracy) and indicated that NRRL Y-11557 utilized diverse carbohydrates but had more limited catabolism of organic acids. The final GSM contained 2,193 reactions, 1,909 metabolites, and 996 genes and was thus named iLst996. The model contained 96 of the annotated carbohydrate-active enzymes. iLst996 predicted a flux distribution in line with oleaginous yeast measurements and was utilized to predict theoretical lipid yields. Twenty-five other yeasts in the Lipomyces clade were then genome sequenced and annotated. Sixteen of the Lipomyces species had orthologs for more than 97% of the iLst996 genes, demonstrating the usefulness of iLst996 as a broad GSM for Lipomyces metabolism. Pathways that diverged from iLst996 mainly revolved around alternate carbon metabolism, with ortholog groups excluding NRRL Y-11557 annotated to be involved in transport, glycerolipid, and starch metabolism, among others. Overall, this study provides a useful modeling tool and data for analyzing and understanding Lipomyces species metabolism and will assist further engineering efforts in Lipomyces .

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1984

Cloud interactions and merging - Numerical simulations

A total of 48 numerical experiments have been performed to study cloud interactions adn merging by means of a two-dimensional multi-cell model. Two soundings of deep convection during GATE and two different magnitudes of large-scale lifting have been used as the initial conditions and as the main forcing on the model. Over two hundred groups of cloud systems with a life history of over sixty minutes have been generated under the influence of different combinations of the stratification and large-scale lifting. The results demonstrate the increase in convective activity and in amount of precipitation with increased intensity of large-scale lifting. The results also show increased occurrence of cloud merger with increased intensity of large-scale lifting. The most unfavorable environmental conditions for cloud merging are (1) less unstable stratification of the atmosphere and (2) weaker large-scale lifting. A total of fourteen cloud systems qualify as mergers. Two selected cases will be described dynamically and thermodynamically in this paper. Although these cloud mergers have been simulated under the influence of different synoptic-scale conditions, the major physical mechanism related to the cloud merging process is the same as that proposed by Simpson. Cumulus downdrafts and associated cold outflows play a dominant role in the merging process in all cases studied.

Tao, W.-K.↗
NASA NTRS1984

On the psychophysics of workload - Why bother with subjective measures?

Psychophysical functions describe the relationship between variations in the amplitude of a defined physical quantity and the psychological perception of these changes. Examples are brightness, loudness, and pain. The regularities of these relationships have been formulated into psychophysical laws. The measurement methodology of psychophysical scaling has been refined by the Harvard group led by Stevens (1957 and 1966), who proposed a power function as a general form for such laws. It is argued here that a similar scaling approach can be adapted to the measurement of workload and task demands based upon subjective estimates. The rationale is that these estimates, like other psychophysical judgments, reflect the individual's perception of the amount of processing resources that the subject invests to meet the demand imposed by a task. This approach was successfully applied to the assessment of 21 experimental conditions given to a group of 60 subjects. The paper discusses the main results of this effort and their implications to theory and application in human performance.

Gopher, D.↗
NASA NTRS1986

Computer-assisted design of organic synthesis

The computer programs to design synthetic pathways of organic compounds have been utilized throughout the world since the first system was reported by Corey in 1969, and the LHASA was reported in1972 to become the predominant system. Many programs have been reported mainly in the United States and Europe, and groups of corporations, especially chemical companies, have been trying to improve programs and increase the efficiency of research. In Japan, unfortunately, no concrete movement in this area has been seen. Of course, it goes without saying that these kinds of programs are effective for efficient research, but the remarkable aspect is that these can present unexpected data to the researchers to stimulate them to develop new ideas.

Kaminaka, H.↗
NASA NTRS2006

Topside sounders as mobile ionospheric heaters

There is evidence that satellite-borne RF sounders can act as mobile ionospheric heaters in addition to performing topside sounding. The main objective of topside sounding is to use sounder-generated electromagnetic (em) waves to obtain ionospheric topside vertical electron-density (N(sub e) profiles. These profiles are obtained from mathematical inversions of the frequency vs. delay-time ionospheric reflection traces. In addition to these em reflection traces, a number of narrowband intense signals are observed starting at zero delay times after the transmitted pulses. Some of these signals, termed plasma resonances, appear at characteristic frequencies of the ambient medium such as at the electron cyclotron frequency f(sub ce), the harmonics nf(sub ce), the electron plasma frequency f(sub pe) and the upper-hybrid frequency f(sub uh), where (f(sub uh))(exp 2) = (f(sub ce))(exp 2) + (f(sub pe))(exp 2) . These signals have been attributed to the oblique echoes of sounder-generated electrostatic (es) waves. These resonances provide accurate in situ f(sub pe) and f(sub ce) values which, in turn, lead to accurate N(sub e) and [B] values where B is the ambient magnetic field. Resonances are also observed between the nf(sub ce) harmonics both above and below f(sub uh). The former, known as the Qn plasma resonances, are mainly attributed to the matching of the wave group velocity of sounder-generated (Bernstein-mode) es waves to the satellite velocity. The frequency spectrum of these waves in the magnetosphere can be used to detect non-Maxwellian electron velocity-distributions. In addition, these resonances also exhibit components that appear to be the result of plasma emissions stimulated by the sounder pulses. The plasma resonances observed between the nf(sub ce) harmonics and below f(sub uh), known as the Dn plasma resonances, are entirely attributed to such sounder-stimulated plasma emissions. There are other sounder-stimulated plasma phenomena that also fall into this category, e.g., ion affects on electron-resonant phenomena, proton-cyclotron echoes and N(sub e) field-aligned irregularities (FAI). Some of these phenomena are more pronounced when f(sub pe)/f(sub ce) approx. = n where n is an integer significantly greater than one. The observations suggest that the sounder-stimulated plasma phenomena are stimulated, or enhanced, on a time scale much less than one second. The purpose of this presentation is to review the above topics with particular emphasis on the sounder-stimulated plasma phenomena.

Benson, R. F.↗