Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mapping System”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

MIND-MAC: Multi-Level In-memory Quasi Non-Destructive MAC Operation in Compact 2T-nC FeRAM for Efficient DNN Accelerator

We present MIND-MAC, a compact 2T-nC FeRAM architecture that performs multi-level, quasi-non-destructive in-memory multiply–accumulate (MAC) for deep neural networks. By exploiting voltage-controlled partial domain switching in MFM capacitors and read-transistor amplification, the cell stores multi-bit weights and gates bit-serial inputs to produce an accumulated current on shared lines. We combine TCAD-extracted parasitics with experimentally calibrated ferroelectric models in SPICE to validate device-/circuit-level behavior, and validate multi-level sensing and QNRO with measurements on a fabricated 2T-3C test vehicle. An analytical system model maps MIND-MAC to a 6-GB main-memory in-memory compute (IMC) architecture and benchmarks VGG13 inference in 61.08 ms at 964.99 mJ. Results indicate high density, reduced rewrite overhead, and energy efficiency, positioning 2T-nC FeRAM as a promising IMC candidate for next-generation AI hardware.

36 MATERIALS SCIENCE↗

Photogrammetry of Apollo 15 photography, part C

In the Apollo 15 mission, a mapping camera system and a 61 cm optical bar, high resolution panoramic camera, as well as a laser altimeter were used. The panoramic camera is described, having several distortion sources, such as cylindrical shape of the negative film surface, the scanning action of the lens, the image motion compensator, and the spacecraft motion. Film products were processed on a specifically designed analytical plotter.

Wu, S. S. C.↗

Mission planning for remote exploration of the surface of Venus.

A science rationale for exploration of the surface of Venus by remote means together with the role of science goals in mission planning is presented. Specific attention is devoted to radar imagery. Earth-based radar images will provide 60% coverage with resolution at 10-km or better surface resolution are anticipated by 1980. A Venus orbiting imaging radar system could map 100% of the surface at 200 meter surface resolution and 3 to 6% at 40 meters or less. Such coverage and resolution are essential for identification of surface processes and for evaluation of lander observations in a planet-wide context. By deduction of surface observation goals, objectives for a Venus orbiter mission are derived and placed in a comprehensive Venus exploration program. The characteristics of such a mission are briefly discussed.

Saunders, R. S.↗

The Jupiter orbiter satellite tour mission

Consideration of the problem of exploring the Jupiter-Galilean satellite system by a spacecraft in orbit about the planet. A simple patched conic algorithm is developed which identifies Jupiter orbiter trajectories that utilize gravity assist flybys of the Galilean satellites. A detailed reference mission is designed against specific science criteria for satellite exploration to demonstrate the possible science return of utilizing close satellite encounters. A navigation strategy is developed, including both planet and satellite relative orbit determination and a maneuver analysis; spacecraft delivery statistics are determined in the barycentric Jupiter-Galilean satellite coordinate system and mapped to the satellite target planes to determine feasibility. A simple maneuver sequence is employed which yields acceptable velocity requirements.

Beckman, J. C.↗

The evolution of the SEASAT imaging radar

The paper describes the design parameters and development of a synthetic aperture radar for use on the SEASAT spacecraft. This imaging radar is designed to operate at altitudes of 800 km with an orbital inclination of 108 deg, a nominal resolution of 25 m, and a swath width of 100 km. The design evolved from planetary imaging radar studies conducted over many years where an L-band imaging radar was developed and tested on aircraft flights as a prototype system to map the surface of Venus. A solid-state transmitter is used where the pulse repetition frequency is a function of altitude and will be about 2kHz for a 12-m long antenna. The receiver consists of the receiver protector, input filters, the gain control, and the RF amplifier. The ground station uses the standard NASA receiver with a 10-m antenna. The correlator, either optical or digital, must be able to compensate for the pitch and yaw variations of the spacecraft as well as the inherent effective yaw caused by the rotation of the earth, and extract the range curvature and range walk effects.

Brown, W. E., Jr.↗

Finite-volume solution of the Euler equations for steady three-dimensional transonic flow

A numerical finite-volume method is proposed for solving the Euler equations of a steady three-dimensional flow. The subsonic regions embedded in steady supersonic flow about aircraft are computed by introducing a time-dependent coordinate system that maps the fuselage and wing into one coordinate surface. The suitability of the method to a delta-winged aircraft is demonstrated, and its applicability to rectangular-winged aircraft and problems in internal transonic flow is pointed out.

Rizzi, A.↗

Forebody and afterbody solutions of the Navier-Stokes equations for supersonic flow over blunt bodies in a generalized orthogonal coordinate system

A coordinate transformation, which can approximate many different two-dimensional and axisymmetric body shapes with an analytic function, is used as a basis for solving the Navier-Stokes equations for the purpose of predicting 0 deg angle of attack supersonic flow fields. The transformation defines a curvilinear, orthogonal coordinate system in which coordinate lines are perpendicular to the body and the body is defined by one coordinate line. This system is mapped in to a rectangular computational domain in which the governing flow field equations are solved numerically. Advantages of this technique are that the specification of boundary conditions are simplified and, most importantly, the entire flow field can be obtained, including flow in the wake. Good agreement has been obtained with experimental data for pressure distributions, density distributions, and heat transfer over spheres and cylinders in supersonic flow. Approximations to the Viking aeroshell and to a candidate Jupiter probe are presented and flow fields over these shapes are calculated.

Gnoffo, P. A.↗

The evaluation of a HgCdTe photomixer with a Tunable Diode Laser (TDL) and the evaluation of TDL's as a local oscillator in a heterodyne detection system

Heterodyne systems would be much more versatile if a broadly tunable laser, such as a semiconductor diode laser (TDL), could be used as the local oscillator (LO). Previous studies have shown that while a TDL can be used as an LO, the TDL lack sufficient power to cause the signal-to-noise ratio to be shot noise limited. The heterodyne system with a HgCdTe photodiode as the LO was characterized and the beat frequency response of the heterodyne systems was mapped out.

Harward, C. N.↗

Pilot Tests of Satellite Snowcover/Runoff Forecasting Systems

Major snow zones of the western U.S. were selected to test the capability of satellite systems for mapping snowcover in various snow, cloud, climatic, and vegetation regimes. Different satellite snowcover analysis methods used in each area are described along with results.

Rango, A.↗

Integration of socioeconomic data and remotely sensed imagery for land use applications

The Image Based Information System (IBIS) uses techniques of digital image processing to interface geocoded data sets, information management systems, thematic maps, and remotely sensed imagery. For two cases IBIS has been used to integrate remotely sensed imagery and socioeconomic data. In the first case thematically classified Landsat imagery covering Orange County, California is combined with census tracts and municipalities. In the second case, thematically classified Landsat imagery over Los Angeles, California is combined with census tracts.

Bryant, N. A.↗

Water vapor as an error source in microwave geodetic systems: Background and survey of calibration techniques

Water vapor as an error source in radio interferometry systems is briefly examined. At microwave frequencies, the delay imposed by tropospheric water vapor becomes a limiting error source for high accuracy geodetic systems. The mapping of tropospheric induced errors into 'solved-for' parameters depends upon baseline length and observing strategy. Simulation analysis (and experience) indicates that in some cases, errors in estimating tropospheric delay can be magnified in their effect on baseline components. The various techniques by which tropospheric water can be estimated or measured are surveyed with particular consideration to their possible use as a calibration technique in support to very long baseline interferometry experiments. The method of remote sensing using a microwave radiometer seems to be the most effective way to provide an accurate estimate of water vapor delay.

Claflin, E. S.↗

Global mapping strategies for a synthetic aperture radar system in orbit about Venus

An analysis of the global mapping of Venus using a synthetic aperture radar (SAR) is presented. The geometry of the side-looking radar, the narrow swath width, and the slow rotation of Venus combine to constrain the methods required to produce such a map within the primary mapping mission of 121.5 days. Parametric studies indicate that multiple strategies can satisfy the requirements of the mission with reasonable assumptions for the total recording capacity, the downlink data rate, and the operating time of the SAR on each revolution.

Kerridge, S. J.↗

Studies of high latitude current systems using Magsat vector data

Disturbance fields caused by global external current systems are analyzed in order to gain an improved understanding of the phydical processes which control high latitude current systems and to increase the confidence level in the identification of internal field levels. The basic approach is to: (1) categorize the vector data by those physical parameters important for investigation of external current systems; (2) map the disturbances for appropriate conditions; (3) model the currents which might cause the mapped disturbances; and (4) correlate results with data from other sources. It is concluded that the Magsat data set appears to have remarkably high precision and quality and should permit major advances to be made in modeling current distribution at high latitudes in the ionosphere and magnetosphere.

Burrows, J. R.↗

Distributed problem solving and natural language understanding models

A theory of organization and control for a meaning-based language understanding system is mapped out. In this theory, words, rather than rules, are the units of knowledge, and assume the form of procedural entities which execute as generator-like coroutines. Parsing a sentence in context demands a control environment in wich experts can ask questions of each other, forward hints and suggestions to each other, and suspend. The theory is a cognitive theory of both language representation and parser control.

Rieger, C.↗

Activities in planetary geology for the physical and earth sciences

A users guide for teaching activities in planetary geology, and for physical and earth sciences is presented. The following topics are discussed: cratering; aeolian processes; planetary atmospheres, in particular the Coriolis Effect and storm systems; photogeologic mapping of other planets, Moon provinces and stratigraphy, planets in stereo, land form mapping of Moon, Mercury and Mars, and geologic features of Mars.

Dalli, R.↗

Synthetic aperture radar range - Azimuth ambiguity design and constraints

Problems concerning the design of a system for mapping a planetary surface with a synthetic aperture radar (SAR) are considered. Given an ambiguity level, resolution, and swath width, the problems are related to the determination of optimum antenna apertures and the most suitable pulse repetition frequency (PRF). From the set of normalized azimuth ambiguity ratio curves, the designer can arrive at the azimuth antenna length, and from the sets of normalized range ambiguity ratio curves, he can arrive at the range aperture length or pulse repetition frequency. A procedure based on this design method is shown in an example. The normalized curves provide results for a SAR using a uniformly or cosine weighted rectangular antenna aperture.

Mehlis, J. G.↗