Search NASA⌕ Search

SEARCH · Search NASA

Results for “Material Attributes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Energy, greenhouse gas, and water life cycle analysis of synthetic graphite anode production in the United States

This study presents a comprehensive life cycle analysis of potential synthetic graphite battery anode material (BAM) production in the U.S. based on industrial-scale data. The analysis focuses on three impacts: greenhouse gas (GHG) emissions, total energy use, and water consumption. We also conducted sensitivity analyses to evaluate the effect of variation in process parameters and energy sources used for synthetic graphite BAM production on its life cycle GHG emissions. A detailed supply chain analysis of graphite BAM in the U.S. was also undertaken, along with a study of its associated GHG emissions. The results show GHG emissions of 29.7 kg CO 2 -eq. per kg BAM, total energy use of 580 MJ kg −1 BAM, and water consumption of 121 L kg −1 BAM for the baseline condition. The graphitization step is a major process hotspot, contributing to over 74% of all impacts. This is attributed to the energy and material input requirements for this step, particularly through the use of crucibles. Across the entire synthetic graphite production process, electricity is the primary contributor, followed by crucibles used in graphite block production, and then calcined petroleum coke. Sensitivity analyses indicate that improvement in micronization yield, reuse of crucibles, and use of low-carbon nuclear energy can significantly reduce GHG emissions of potential domestic graphite production (by ∼70%). Supply chain analysis identified major graphite BAM sources in the U.S. and showed that the U.S. has a competitive advantage in domestic production of synthetic graphite BAM in terms of reduced life cycle GHG emissions compared to present-day imported sources (by ∼20%).

Battery anode↗

Report on 240 Am(n,x) surrogate cross section test measurement

The main goal of the test measurement was to determine the feasibility of the 243 Am(p,t) reaction as a surrogate for 240 Am(n,f). No data cross section data exists for neutron induced reactions on 240 Am; the half-life of this isotope is only 2.1 days making direct measurements difficult, if not impossible. The 48-hour experiment was conducted using the STARS/LIBERACE experimental facility located at the 88 Inch Cyclotron at Lawrence Berkeley National Laboratory in August 2011. A description of the experiment and results is given. The beam energy was initially chosen to be 39 MeV in order to measure an equivalent neutron energy range from 0 to 20 MeV. However, the proton beam was not stopped in the farady cup and the beam was deposited in the surrounding shielding material. The shielding material was not conductive, and a beam current, needed for proper tuning of the beam as well as experimental monitoring, could not be read. If the 240 Am(n,f) surrogate experiment is to be run at LBNL, simple modifications to the beam collection site will need to be made. The beam energy was reduced to 29 MeV, which was within an energy regime of prior experiments and tuning conditions at STARS/LIBERACE. At this energy, the beam current was successfully tuned and measured. At 29 MeV, data was collected with both the 243 Am and 238 U targets. An example particle identification plot is shown in Fig. 1. The triton-fission coincidence rate for the 243 Am target and 238 U target were measured. Coincidence rates of 0.0233(1) cps and 0.150(6) cps were observed for the 243 Am and 238 U targets, respectively. The difference in count rate is largely attributed to the available target material - the 238 U target contains approximately 7 times more atoms than the 243 Am. A proton beam current of ~0.7 nA was used for measurements on both targets. Assuming a full experimental run under similar conditions, an estimate for the run time needed was made. Figure 2 shows the number of days needed as a function of acceptable uncertainty for a measurement of 1-20 MeV equivalent neutron energy, binned into 200 keV increments. A 5% measurement will take 3 days for U, but 20 days for Am. It may be difficult to be the sole user of the LBNL cyclotron, or another facility, for such an extended period. However, a 10% measurement will take 19 hours for U, and 5 days for Am. Such a run period is more reasonable and will allow for the first ever measurement of the 240 Am(n,f) cross section. We also anticipate 40% more beam time being available at Texas A&M Cyclotron Institute compared to LBNL in FY2012. The increased amount of beam time will allow us to accumulate better statistics then what would have been available at LBNL.

43 PARTICLE ACCELERATORS↗

Activation Energies of Harvested Boston Insulated Wire and Okonite Cable Materials

As part of the Cable Aging Task within the Material Aging and Degradation (MAaD) pathway of the DOE Light Water Reactor Sustainability (LWRS) program, ORNL is collaborating with Pacific Northwest National Laboratory (PNNL), the Electric Power Research Institute (EPRI), and the US Nuclear Regulatory Commission (NCR) to study cable aging mechanisms. Understanding cable aging mechanisms in cable nuclear power plants (NPPs) with needed information as they seek plant life extensions to 80 years of operations. This report summarizes activities in the characterization of harvested electrical I&C cables related to activation energy and their role in determining the remaining margin of time cable insulation in NPPs can be used. Activation energy is the amount of energy that is required to break chemical bonds in a polymer through an endothermic reaction. For I&C cables that are utilized in NPPs, activation energy is used with a time and temperature dependent cable property like elongation at break (EAB) and/or an electrical property like voltage withstand to determine whether a cable insulation material meets the performance requirements for the environmental conditions such as temperature, radiation, and humidity for a given plant location. Considering differences in activation energies that were observed in harvested cable jackets when compared to previous measurements, an assessment of the cable insulation activation energy in harvested I&C cables was performed given that the insulation performance ultimately determines that lifetime performance for a cable. This assessment consisted of the mechanical and chemical characterization of harvested Boston Insulated Wire (BIW) and Okonite cable insulations from Zion NPP from a series of thermal accelerated aging exposures between 140°C and 160°C. Cables were obtained as part of the LWRS Zion Harvesting Project in cooperation with Energy Solutions and the NRC. Activation energies of 1.10 eV and 0.61 eV were obtained for BIW and Okonite manufactured ethylene propylene rubber (EPR) insulation with individual chlorosulfonated polyethylene (CSPE) jackets respectively. When compared to previous measurements, the activation energy of BIW agreed well, while there was a sizeable gap for previous Okonite activation energies near 0.91 eV. The lack of agreement could be attributed to differences in raw materials used in a given insulation and/or jacket, differences in the thicknesses of the EPR insulation and CSPE individual jacket or the environmental conditions that the insulation from previous measurements experienced prior to characterization especially if cables were not stored at manufacturer recommended conditions. Comparison of harvested insulation compositions from multiple NPP sites and locations in a given NPP with respect to activation energy could provide some guidance on property sensitivity and insulation variations. To address the issue of material thickness, an initial assessment of the influence of the CPSE individual jacket was also done. This was motivated by the different combinations of EPR insulation and CSPE individual jacket thicknesses that were found in harvested cables and previous measurements. Accelerated thermal aging of BIW-manufactured EPR insulation with individual CSPE jackets removed did show that the CSPE layer affected insulation degradation, further comparison of the compositional make-up of the CSPE and EPR for both BIW and Okonite insulation, along with a limited amount of additional accelerated aging, is needed to increase the level of confidence regarding the influence of the CSPE.

36 MATERIALS SCIENCE↗

Short-lived nuclei in the early solar system

An overview is given of the existence and abundance of short-lived nuclei that were present in the early solar system. It is shown that there are excesses of certain isotopes that may be assigned to the decay of short-lived radioactive nuclei corresponding to an abundance of about 0.0001 relative to a neighboring stable isotope. This abundance is roughly similar to the level of general nonlinear isotopic anomalies present in meteoritic material (excluding oxygen) which are not attributable to short-lived nuclei. If these results are representative of the bulk solar system, they indicate that about 0.0001 solar mass of freshly synthesized material of peculiar composition was added to the protosolar nebula as it was formed from the interstellar medium. This material must have been synthesized about three million yr before the formation of the solar system.

Wasserburg, G. J.↗

Materials science research in microgravity

There are several important attributes of an extended duration microgravity environment that offer a new dimension in the control of the microstructure, processing, and properties of materials. First, when gravitational effects are minimized, buoyancy driven convection flows are also minimized. The flows due to density differences, brought about either by composition or temperature gradients will then be reduced or eliminated to permit a more precise control of the temperature and the composition of a melt which is critical in achieving high quality crystal growth of electronic materials or alloy structures. Secondly, body force effects such as sedimentation, hydrostatic pressure, and deformation are similarly reduced. These effects may interfere with attempts to produce uniformly dispersed or aligned second phases during melt solidification. Thirdly, operating in a microgravity environment will facilitate the containerless processing of melts to eliminate the limitations of containment for reactive melts. The noncontacting forces such as those developed from electromagnet, electrostatic, or acoustic fields can be used to position samples. With this mode of operation, contamination can be minimized to enable the study of reactive melts and to eliminate extraneous crystal nucleation so that novel crystalline structures and new glass compositions may be produced. In order to take advantage of the microgravity environment for materials research, it has become clear that reliable processing models based on a sound ground based experimental experience and an established thermophysical property data base are essential.

Perepezko, John H.↗

The use of low-energy SIMS (LE-SIMS) for nanoscale fuel cell material development

Low-energy secondary ion mass spectrometry has been used to investigate the matrix structure and interface attributes of a novel Ce0.85Sm0.15O2/CeO2 multilayer fuel cell material. Nanoscale oxide systems have shown enhanced ionic conductivities when produced to form highly oriented epitaxial structures. The Sm-doped CeO2 material system is of particular interest for fuel cell technology because of its inherently high ionic conductivity at low operating temperatures (600-800 C). For this study, a nanometer-scale Ce0.85Sm0.15O2/CeO2 multilayer was grown by pulsed laser deposition. The sample was annealed at 700 C in an oxygen ambience. High-resolution, low-energy depth profiling using Cs revealed some diffusion of the multilayer structure after annealing, along with a possible volume change for the Sm-doped layers. Changes in layer volume will lead to an increase in the mechanical strain and may cause the material to crack. The findings presented here suggest that the Ce0.85Sm0.15O2/CeO2 multilayer structure in its current form may not possess the level of thermal stability required for use within a fuel cell environment.

30 DIRECT ENERGY CONVERSION↗

Correlating mechanical properties and anti-wear performance of tribofilms formed by ionic liquids, ZDDP and their combinations

Here we examine the elasticity, hardness, and resistance-to-plastic-deformation (P/S 2 ) measured via nanoindentation of several tribofilms and correlates these properties to friction and wear behavior. The tribofilms were generated by ball-on-plate reciprocating sliding lubricated by a base oil containing an ionic liquid, phosphonium-organophosphate or ammonium-organophosphate, zinc dialkyldithiophosphate (ZDDP), or combination of IL and ZDDP. Nanoindentation was conducted at room and elevated temperatures. While there seems little correlation between the tribofilm hardness and tribological behavior, a higher modulus generally leads to better friction and wear performance. Interestingly, a lower P/S 2 ratio tends to reduce friction and improve wear protection, which is in an opposite trend as reported for bulk materials. Ultimately, this is likely attributable to the dynamic, self-healing characteristics of tribofilms.

42 ENGINEERING↗

Pore-Engineered Metal–Organic Frameworks with Excellent Adsorption of Water and Fluorocarbon Refrigerant for Cooling Applications

Metal–organic frameworks (MOFs) are found to be promising sorbents for adsorption cooling applications. Using organic ligands with 1, 2, and 3 phenylene rings, we construct moisture-stable Ni-MOF-74 members with adjustable pore apertures. These pore-engineered materials exhibit excellent sorption capabilities towards water and fluorocarbons. The adsorption patterns for these materials differ significantly and are attributed to variances in the hydrophobic/hydrophilic pore character, associated with differences in pore size. Complementary ex situ characterizations and in situ FTIR spectra are deployed to understand the correlations between the mechanisms of gas loadings and the pore environment of the MOFs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Graphene oxide/metal nanocrystal multilaminates as the atomic limit for safe and selective hydrogen storage

Interest in hydrogen fuel is growing for automotive applications; however, safe, dense, solid-state hydrogen storage remains a formidable scientific challenge. Metal hydrides offer ample storage capacity and do not require cryogens or exceedingly high pressures for operation. However, hydrides have largely been abandoned because of oxidative instability and sluggish kinetics. We report a new, environmentally stable hydrogen storage material constructed of Mg nanocrystals encapsulated by atomically thin and gas-selective reduced graphene oxide (rGO) sheets. This material, protected from oxygen and moisture by the rGO layers, exhibits exceptionally dense hydrogen storage (6.5 wt% and 0.105 kg H 2 per litre in the total composite). As rGO is atomically thin, this approach minimizes inactive mass in the composite, while also providing a kinetic enhancement to hydrogen sorption performance. In conclusion, these multilaminates of rGO-Mg are able to deliver exceptionally dense hydrogen storage and provide a material platform for harnessing the attributes of sensitive nanomaterials in demanding environments.

08 HYDROGEN↗

Tuning electronic properties in LaNiO 3 thin films by B-site Cu-substitution

Resistors are essential parts of futuristic all-oxide electronic architectures, yet easily overlooked due to their apparent simplicity. In this study, design of thin films with specific resistance spanning six orders of magnitude by partial substitution of Cu 2+ for Ni 3+ in the metallic conductor LaNiO 3 is shown. Substitution is attainable across the whole composition range using atomic layer deposition on LaAlO 3 (100) pc substrates, however with some inclusion of Ruddlesden–Popper RP1 phase (La 2 CuO 4 ) at high levels of Cu-incorporation. The thermal stability of the resistance is based on a metal–insulator transition that evolves from non-existent for LaNiO 3 to above room-temperature for high Cu 2+ substitution. This provides further insight in the metal–insulator transition found for correlated rare-earth nickelates, especially the type of transition seen for ultrathin films of LaNiO 3 that is usually attributed to oxygen vacancy formation. Materials with variable resistivity and metal–insulator-transition temperatures are key in the design of futuristic electronics such as metal–insulator-transition-driven neuromorphic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Revealing uncommon transport in the previously unascertained very low cation clathrate-I Eu 2 Ga 11 Sn 35

In this study, high occupancy of cation sites is typical for clathrate-I compositions allowing limited tunability of the electrical properties beyond doping and elemental substitution. Herein, we report on the structure and electrical transport of single-crystal Eu 2 Ga 11 Sn 35 , the sole example of a very low (25%) cation concentration clathrate-I material with atypical transport directly attributable to the structure and stoichiometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interplay of structural fluctuations and charge carrier dynamics is key for high performance of hybrid lead halide perovskites

The ability of methylammonium lead triiodide (MAPbI 3 ) to achieve photoelectric conversion efficiency that is on par with crystalline silicon has led to a surge of interest in perovskite photovoltaics. However, an in-depth understanding of how the ubiquitous coupling between the fast rovibrational movements of the organic cations and the phonon vibrations of the inorganic framework affects the relaxation and recombination of hot carriers remains largely elusive. Access to such knowledge is critical to guide design and increase efficiency of new classes of perovskite solar cells. In this report, we report a time-domain ab initio investigation of temperature dependent excited state dynamics in MAPbI 3 , with particular emphasis on nuclear anharmonic effects. The observed strong anharmonicity is attributed to softness of the material and unusual dynamical coupling between the organic and inorganic components. At an elevated temperature, the hydrogen bonding between MA and iodines is weakened, enhancing rotation of MA cations, which become more dynamically disordered. As a result, thermal vibrations of the inorganic Pb–I sublattice are suppressed, and the lattice anharmonicity is decreased. Thermal fluctuations of the electronic energy levels are found to follow the trend of anharmonic motions of Pb and I atoms, with holes relaxing faster to the band edges than electrons, due to higher density of the hole states. While elevated temperature accelerates intraband carrier cooling, it slows nonradiative carrier recombination. The latter result is important for performance, since solar cells and other devices heat up during operation. The reported signatures of coupled structural dynamics of the organic cations and inorganic framework unravel the interplay between anomalous structural fluctuations and charge carrier dynamics, which is of particular importance for fundamental understanding of the structure–property relationships in hybrid metal halide perovskites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optically transparent, mechanically durable, nanostructured superhydrophobic surfaces enabled by spinodally phase-separated glass thin films

Inspired by highly non-wetting natural biological surfaces (e.g., lotus leaves and water strider legs), artificial superhydrophobic surfaces that exhibit water droplet contact angles exceeding 150o have previously been constructed by utilizing various synthesis strategies.[ , , ] Such bio-inspired, water-repellent surfaces offer significant potential for numerous uses ranging from marine applications (e.g., anti-biofouling, anti-corrosion), anti-condensation (e.g., anti-icing, anti-fogging), membranes for selective separation (e.g., oil-water, gas-liquid), microfluidic systems, surfaces requiring reduced maintenance and cleaning, to applications involving glasses and optical materials.[ ] In addition to superhydrophobic attributes, for integration into device systems that have extended operational limits and overall improved performance, surfaces that also possess multifunctional characteristics are desired, where the functionality should match to the application-specific requirements.

Nano-structure↗

Archaeological applications of laser-induced breakdown spectroscopy: an example from the Coso Volcanic Field, California, using advanced statistical signal processing analysis

Over the past quarter century, multielement chemical analysis has become a common means for attributing the provenance of archaeological materials. The Coso Volcanic Field (CVF) in California, USA, contains at least 38 high-silica rhyolite domes, many of which contain obsidian glass that has been quarried for tools by the indigenous population for more than 12,000 years. Artifacts made from CVF obsidian are found throughout the southwestern United States and geochemical sourcing of CVF obsidian has been an important tool in understanding prehistoric Native American trading patterns. Laser-induced breakdown spectroscopy (LIBS) is a simple atomic emission spectroscopic technique that has the potential for real-time man-portable chemical analysis in the field. Because LIBS is simultaneously sensitive to all elements, a single laser shot can be used to record the broadband emission spectra, which provides a ''chemical fingerprint'' of a material. Single-shot broadband LIBS spectra were collected using a commercial benchtop LIBS system for 27 obsidian samples from major sites across the CVF and four additional sites in California and western Nevada outside of CVF. Classification of the samples was performed using partial least-squares discriminant analysis (PLSDA), a common chemometric technique suitable for performing regression on high-dimensional data. Provenance identification for the obsidian samples was evaluated for three separate labeling frameworks. The first framework consisted of a binary classification problem to distinguish CVF samples from non-CVF samples. The second approach focused on the CVF samples with labels that corresponded to the eight separate Coso sites encompassed by the 27 samples. In the third analysis, non-CVF samples were excluded, and the remaining 27 CVF samples were labeled based on groupings defined from previous major and trace element chemical studies, which reduces the number of possible classes from eight to four. Different aspects of the classifier setup considered in this study include the training/testing routine (a 27-fold leave-one-sample-out setup versus a simple split of the data into separate sets for training and evaluation), the number of latent variables used in the regression model, and whether PLSDA operating on the entire broadband LIBS spectrum is superior to that using only a selected subset of LIBS emission lines. The results point to the robustness of the PLSDA technique and suggest that LIBS analysis combined with the appropriate statistical signal processing has the potential to be a useful tool for chemical analysis of archaeological artifacts and geological specimens.

74 ATOMIC AND MOLECULAR PHYSICS↗

Harvard Bounce Apparatus GoAmazon 2014/15 Field Campaign Report

The effect of relative humidity (RH) on the physical state of particulate matter during the GoAmazon 2014/15 campaign was investigated through the use of particle rebound (or lack thereof) during impaction. The physics governing particle rebound have been previously modeled and can be attributed to the surface and material properties. The physical state of secondary organic material is regulated by several factors, including the local RH, the recent RH history in the case of hysteresis, and chemical composition. Across the range of atmospheric RH, hygroscopic water uptake can occur and transitions from higher to lower viscosity phases are possible. By varying the particulate matter water content and observing particle rebound as a function of RH, the phase state of the organic material under investigation can be determined. Custom-made impactors were employed to study the effects of RH (up to 95%) on the particle physical state. Results inferred from the particle rebound measurements indicate that, under ambient conditions (RH >80%), particulate matter in Amazonia can be considered in a liquid phase state. However, during certain time periods, a fraction (10 to 30%) of particulate matter is found to rebound during the highest RH conditions, which indicates the presence of hydrophobic particles. The source of the hydrophobic particulates appears to be anthropogenic, from either biomass burning or the Manaus plume.

54 ENVIRONMENTAL SCIENCES↗

DOE/GO/15075-MacDiarmid-Wang Final Technical Report

Since Cho et al. reported up to ~8 wt% room-temperature hydrogen adsorption in HCl-treated polyaniline and polypyrrole [1], the research on the interactions between hydrogen and conducting polymers has become an area of special interest in the hydrogen economy community. However, later studies on hydrogen sorption using conducting polymers gave controversial results, which showed either much lower H2 uptake [2] or no H2 uptake at all [3]. As conducting polymers possess some unique “unconventional” and complex characteristics [4], it is highly likely that the controversial results could be attributed to the variation in material characteristics caused by “ambiguous” processing/handling procedures employed in H2 uptake studies involving conducting polymers. In order to determine whether conducting polymers can be developed into a new type of high-performance media for hydrogen storage applications, the goals of the project were to (i) confirm the brief report by Cho et al. [1] that ~8 wt% hydrogen gas storage in doped (metallic) forms of organic conducting polymers (“synthetic metals”), polyaniline and polypyrrole, can be attained, (ii) determine the optimum polymer preparative methods, chemical composition, polymer electrode potential, polymer crystallinity and morphology to give quantitative optimum conditions of hydrogen gas adsorption and desorption and (iii) investigate hydrogen storage by the many known types of organic conducting polymers in their semiconducting and, metallic forms, and in selected oxidation states.

08 HYDROGEN↗

Part 1: Silicon ingot casting. Heat Exchanger Method (HEM)

Directional solidification by the Heat Exchanger Method (HEM) is a viable approach for directional solidification of silicon ingots used for terrestrial solar cell applications. Some of the significant advances made during this phase of the program were: ingot size, 34 cm x 34 cm x 17 cm - 45 kg, usable material yield - 90%, solar cell efficiency averaged over the whole ingot - 85% of control CZ (35 kg ingot), very uniform resistivity over the boule, and cycle time for 36 kg ingots - 56 hours. Some of the problems encountered were growth rate decrease with increased ingot height, silicon carbide precipitates, and high dislocation density in HEM material. The silicon carbide is attributed to backstreaming of oil vapors from the vacuum pump; the high dislocation density is associated with the thermal history of the boule.

Source record↗

Finite element analysis of the Space Shuttle 2.5-inch frangible nut

Finite element analysis of the Space Shuttle 2.5-inch frangible nut was conducted to improve understanding of the current design and proposed design changes to this explosively-actuated nut. The 2.5-inch frangible nut is used in two places to attach the aft end of the Space Shuttle Orbiter to the External Tank. Both 2.5-inch frangible nuts must function to complete safe separation. The 2.5-inch frangible nut contains two explosive boosters containing RDX explosive each capable of splitting the nut in half, on command from the Orbiter computers. To ensure separation, the boosters are designed to be redundant. The detonation of one booster is sufficient to split the nut in half. However, beginning in 1987 some production lots of 2.5-inch frangible nuts have demonstrated an inability to separate using only a single booster. The cause of the failure has been attributed to differences in the material properties and response of the Inconel 718 from which the 2.5-inch frangible nut is manufactured. Subsequent tests have resulted in design modifications of the boosters and frangible nut. Model development and initial analysis was conducted by Sandia National Laboratories (SNL) under funding from NASA Lyndon B. Johnson Space Center (NASA-JSC) starting in 1992. Modeling codes previously developed by SNL were transferred to NASA-JSC for further analysis on this and other devices. An explosive bolt with NASA Standard Detonator (NSD) charge, a 3/4-inch frangible nut, and the Super*Zip linear separation system are being modeled by NASA-JSC.

Darin N. McKinnis↗