Effect of diameter of closed-end coolant passages on natural-convection water cooling of gas-turbine blades
Explore the source record for details and available documents.
Curren, Arthur N↗
SEARCH · Search NASA
Results for “Natural Gas”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
High pressure combustion of liquid fuels
Measurements were made of the burning rates and liquid surface temperatures for a number of alcohol and n-paraffin fuels under natural and forced convection conditions. Porous spheres ranging in size from 0.64-1.9 cm O.D. were emloyed to simulate the fuel droplets. The natural convection cold gas tests considered the combustion in air of methanol, ethanol, propanol-1, n-pentane, n-heptane, and n-decane droplets at pressures up to 78 atmospheres. The pressure levels of the natural convection tests were high enough so that near critical combustion was observed for methanol and ethanol vaporization rates and liquid surface temperature measurements were made of droplets burning in a simulated combustion chamber environment. Ambient oxygen molar concentrations included 13%, 9.5% and pure evaporation. Fuels used in the forced convection atmospheric tests included those listed above for the natural convection tests. The ambient gas temperature ranged from 600 to 1500 K and the Reynolds number varied from 30 to 300. The high pressure forced convection tests employed ethanol and n-heptane as fuels over a pressure range of one to 40 atmospheres. The ambient gas temperature was 1145 K for the two combustion cases and 1255 K for the evaporation case.
Canada, G. S.↗
The Chevron Foil Thrust Bearing: Improved Performance Through Passive Thermal Management and Effective Lubricant Mixing
An improved foil thrust bearing is described that eliminates or reduces the need for forced cooling of the bearing foils while at the same time improves the load capacity of the bearing, enhances damping, provides overload tolerance, and eliminates the high speed load capacity drop-off that plagues the current state of the art. The performance improvement demonstrated by the chevron foil thrust bearing stems from a novel trailing edge shape that splays the hot lubricant in the thin film radially, thus preventing hot lubricant carry-over into the ensuing bearing sector. Additionally, the chevron shaped trailing edge induces vortical mixing of the hot lubricant with the gas that is naturally resident within the inter-pad region of a foil thrust bearing. The elimination of hot gas carry-over in combination with the enhanced mixing has enabled a completely passive thermally managed foil bearing design. Laboratory testing at NASA has confirmed the original analysis and reduced this concept to practice.
foil bearing↗
Theory for a gas composition sensor based on acoustic properties
Sound travelling through a gas propagates at different speeds and its intensity attenuates to different degrees depending upon the composition of the gas. Theoretically, a real-time gaseous composition sensor could be based on measuring the sound speed and the acoustic attenuation. To this end, the speed of sound was modelled using standard relations, and the acoustic attenuation was modelled using the theory for vibrational relaxation of gas molecules. The concept for a gas composition sensor is demonstrated theoretically for nitrogen-methane-water and hydrogen-oxygen-water mixtures. For a three-component gas mixture, the measured sound speed and acoustic attenuation each define separate lines in the composition plane of two of the gases. The intersection of the two lines defines the gas composition. It should also be possible to use the concept for mixtures of more than three components, if the nature of the gas composition is known to some extent.
NASA Discipline Life Sciences Technologies↗
Optical and ultraviolet absorption studies of cool gas in the Milky Way halo
This paper focuses on the contributions from absorption techniques to the knowledge of halo gas with temperatures below 10 to the 5th K. The results from observations of the neutral and singly ionized species on the nature of cool gas in the halo, its structure and its kinematics are presented. An overview of past and optical and ultraviolet observational studies of halo gas is included.
Danly, L.↗
Inert gas spraying device aids in repair of hazardous systems
Inert gas spraying device aids in safely making mechanical repairs to a cryogenic fluid system without prior emptying of the system. This method can be applied to any natural or bottled gas system and with modifications to gasoline transports.
Teleha, S.↗
Variable-temperature cryogenic trap for the separation of gas mixtures
The paper describes a continuous variable-temperature U-shaped cold trap which can both purify vacuum-line combustion products for subsequent stable isotopic analysis and isolate the methane and ethane constituents of natural gases. The canister containing the trap is submerged in liquid nitrogen, and, as the gas cools, the gas mixture components condense sequentially according to their relative vapor pressures. After the about 12 min required for the bottom of the trap to reach the liquid-nitrogen temperature, passage of electric current through the resistance wire wrapped around the tubing covering the U-trap permits distillation of successive gas components at optimal temperatures. Data on the separation achieved for two mixtures, the first being typical vacuum-line combustion products of geochemical samples such as rocks and the second being natural gas, are presented, and the thermal behavior and power consumption are reported.
Des Marais, D. J.↗
Effect of blade-tip crossover passages on natural-convection water-cooling of gas-turbine blades
Explore the source record for details and available documents.
Zalabak, Charles F↗
Detection of Natural Oil Seeps in the Atlantic Ocean Using MODIS
Natural oil seepage is the release of crude oil into the ocean from fissures in the seabed. Oil seepage is a major contributor to the total amount of oil entering the world s oceans. According to a 2003 study by the National Academy of Sciences (NAS), 47 percent of oil entering the world s oceans is from natural seeps, and 53 percent is from human sources (extraction, transportation, and consumption). Oil seeps cause smooth oil slicks to form on the water s surface. Oil seeps can indicate the location of stores of fossil fuel beneath the ocean floor. Knowledge of the effect of oil seepage on marine life and marine ecosystems remains limited. In the past, remote sensing has been used to detect oil seeps in the Gulf of Mexico and off of the coast of southern California. This project utilized sun glint MODIS imagery to locate oil slicks off of the Atlantic coast, an area that had not previously been surveyed for natural oil seeps using remote sensing. Since 1982, the Atlantic Ocean has been closed to any oil and gas drilling. Recently, however, the U.S. Minerals Management Services (MMS) has proposed a lease for oil and gas drilling off the coasts of Virginia and North Carolina. Determining the location of seepage sites in the Atlantic Ocean will help MMS locate potential deposits of oil and natural gas, thereby reducing the risk of leasing areas for petroleum extraction that do not contain these natural resources.
Reahard, Ross↗
Physical processes in comets
The paper discusses physical processes in comets which involve solar and nuclear radial forces that affect the motions of gases and icy grains, gas-phase chemistry very close to the nuclei of large comets near the sun, sublimation of icy grains, dissociation of parent molecules into radicals and of radicals into atoms, and ionization by sunlight and collisions. The composition and dimensions of nuclei are examined along with variations in intrinsic brightness, the nature of volatiles, gas production rates in the coma, characteristics of icy grains in the coma, and the structure of streamers, ion tails, and dust tails. The structure of the coma is described in detail on the basis of spectroscopic observations of several comets. The origin of comets is briefly reviewed together with the relation of comets to earth, the interplanetary complex, and the interstellar medium. Desirable future observations are noted, especially by space missions to comets.
Whipple, F. L.↗
Gravitational collapse of small-scale structure as the origin of the Lyman-alpha forest
If gravitational clustering is a hierarchical process, the present large-scale structure of the galaxy distribution implies that structures on smaller scales must have formed at high redshift. We simulate the formation of small-scale structure (average cell mass: (delta) bar m(sub b) = 10(sup 4.2) solar mass) and the evolution of photoionized gas, in the specific case of the CDM + Lambda model. The photoionized gas has a natural minimal scale of collapse, the Jeans scale (m(sub b,J) is approximately equal to 10(exp 9) solar mass). We find that low column density (N(sub HI) is less than or equal to 10(exp 14)/sq cm) lines originate in regions resembling Zel'dovich pancakes, where gas with overdensities in the range 3-30 is enclosed by two shocks but is typically reexpanding at approximately the Hubble velocity. However, higher column density lines stem from more overdense regions where the shocked gas is cooling. We show that this model can probably account for the observed number of lines, their distribution in column density and b-parameters, as well as the cloud physical sizes as observed in gravitationally lensed quasars. We find a redshift evolution that is too steep; however, this may be due to insufficient dynamical range in the simulation or because the specific model is incorrect. The model predicts that high signal-to-noise observations should find systematic deviations from Voigt profiles, mainly in the form of broad wings in the line profiles, and that a fluctuating Gunn-Peterson effect will be detected, which can be modeled as a superposition of weak lines with a wide range of b-parameters.
Cen, Renyue↗
Preventing Damaging Pressure Gradients at the Walls of an Inflatable Space System
An inflatable structural system to deploy a space system such as a solar shield, an antenna or another similar instrument, requires a stiffening element after it is extended by the inflated gas pressure. The stiffening element has to be packaged in a folded configuration before the deployment. It must be relatively small, lightweight, non-damaging to the inflated system, and be able to become stiff in a short time. One stiffening method is to use a flexible material inserted in the deployable system, which, upon a temperature curing, can become stiff and is capable to support the entire structure. There are two conditions during the space operations when the inflated volume could be damaged: during the transonic region of the launch phase and when the curing of the rigidizing element occurs. In both cases, an excess of pressure within the volume containing the rigid element could burst the walls of the low-pressure gas inflated portion of the system. This paper investigates those two conditions and indicates the vents, which will prevent those damaging overpressures. Vent openings at the non-inflated volumes have been calculated for the conditions existing during the launch. Those vents allow the initially folded volume to exhaust the trapped atmospheric gas at approximately the same rate as the ambient pressure drops. That will prevent pressure gradients across the container walls which otherwise could be as high as 14.7 psi. The other condition occurring during the curing of the stiffening element has been investigated. This has required the testing of the element to obtain the gas generation during the curing and the transformation from a pliable material to a rigid one. The tested material is a composite graphite/epoxy weave. The outgassing of the uncured sample at 121C was carried with the Cahn Microbalance and with other outgassing facilities including the micro-CVCM ASTM E-595 facility. The tests provided the mass of gas evolved during the test. That data, including the chemical nature of the evolved gas, provided the data for the calculation of the pressure produced within the volume. The evaluation of the areas of the vents that would prevent excessive pressures and provide a rapid release of the gas away from contamination sensitive surfaces has been carried out. The pressure decay with time has been indicated.
Scialdone, John J.↗
Preventing Damaging Pressure Gradients at the Walls of an Inflatable Space System
An inflatable structural system to deploy a space system such as a solar shield, an antenna or another similar instrument requires a stiffening element after it is extended by the inflated gas pressure. The stiffening element has to be packaged in folded configuration before the deployment. It must be relatively small, lightweight, non-damaging to the inflated system and be able to become stiff in a short time. One stiffening method is to use a flexible material inserted in the deployable system, which, upon a temperature curing, can become stiff and is capable of supporting the entire structure. There are two conditions during the space operations when the inflated volume could be damaged: during the transonic region of the launch phase and when the curing of the rigidizing element occurs. In both cases, an excess of pressure within the volume containing the rigid element could burst the walls of the low-pressure gas inflated portion of the system. This paper investigates those two conditions and indicates the vents, which will prevent those damaging overpressures. Vent openings at the non-inflated volumes have been calculated for the conditions existing during the launch. Those vents allow the initially folded volume to exhaust the trapped atmospheric gas at approximately the same rate as the ambient pressure drops. That will prevent pressure gradients across the container walls which otherwise could be as high as 14.7 psi. The other condition occurring during the curing of the stiffening element has been investigated. This has required the testing of the element to obtain the gas generation during the curing and the transformation from a pliable material to a rigid on The tested material is a composite graphite/epoxy weave. The outgassing of the uncured sample at 121 deg Celcius was carried with the Cahn Microbalance and with other outgassing facilities including the micro-CVCM ASTM E-595 facility. The test provided the mass of gas evolved during the test. That data, including the chemical nature of the evolved gas, provided the data for the calculation of the pressure produced within the volume. The evaluation of the areas of the vents that would prevent excessive pressures and provide a rapid release of the gas away from contamination sensitive surfaces has be carried out. The pressure decay with time has been indicated.
Scialdone, John J.↗
Validation of Cryogenic Propellant Tank Self-Pressurization by Leveraging Reduced Order Modeling within Computational Fluid Dynamics Simulation
Validation of cryogenic propellant tank self-pressurization was performed using a hybrid Computational Fluid Dynamics (CFD) and reduced order modeling methodology. Data from a liquid hydrogen ground test conducted at the K-site facility at the National Aeronautics and Space Administration (NASA) Glenn Research Center was used for the validation effort. Liquid phase dynamics were explicitly resolved with a CFD tool. Vapor phase dynamics were modeled as a point mass that communicated heat from the tank wall to the liquid phase via a boundary condition used at the gas-liquid interface. The method proved to be more accurate, robust, and efficient than explicit resolution of the dynamics using a standard Volume of Fluid (VOF) methodology. The subject pressurization process was found to be heavily dependent upon both the relatively high liquid temperature gradient near the gas-liquid interface and the natural convection flow path. Modeling the gas-liquid interface as an immovable surface eliminated temperature gradient destroying gas-liquid interface velocities observed in VOF simulations, and correspondingly enabled more rapid simulation since interface advection was not allowed. The single phase computational domain also facilitated the ability to demonstrate spatial resolution convergence of natural convection cells within the liquid which significantly impacted the tank pressurization rate. This work was used to demonstrate the critical physics for tank self-pressurization and numerical methodologies that may be used to best resolve those physics. The findings informed development and operation of production level CFD tools used in the Fluid Dynamics Branch at NASA Marshall Space Flight Center.
J. M. Brodnick↗
Bidirectional Pressure-Regulator System
A bidirectional pressure-regulator system has been devised for use in a regenerative fuel cell system. The bidirectional pressure-regulator acts as a back-pressure regulator as gas flows through the bidirectional pressure-regulator in one direction. Later, the flow of gas goes through the regulator in the opposite direction and the bidirectional pressure-regulator operates as a pressure- reducing pressure regulator. In the regenerative fuel cell system, there are two such bidirectional regulators, one for the hydrogen gas and another for the oxygen gas. The flow of gases goes from the regenerative fuel cell system to the gas storage tanks when energy is being stored, and reverses direction, flowing from the storage tanks to the regenerative fuel cell system when the stored energy is being withdrawn from the regenerative fuel cell system. Having a single bidirectional regulator replaces two unidirectional regulators, plumbing, and multiple valves needed to reverse the flow direction. The term "bidirectional" refers to both the bidirectional nature of the gas flows and capability of each pressure regulator to control the pressure on either its upstream or downstream side, regardless of the direction of flow.
Burke, Kenneth↗
Chondrites and the Protoplanetary Disk, Part 2
Contents include the following: On the Dynamical Evolution of a Nebula and Its Effect on Dust Coagulation and the Formation of Centimeter-sized Particles. The Mineralogy and Grain Properties of the Disk Surfaces in Three Herbig Ae/Be Stars. Astrophysical Observations of Disk Evolution Around Solar Mass Stars. The Systematic Petrology of Chondrites: A Consistent Approach to Assist Classification and Interpretation. Understanding Our Origins: Formation of Sun-like Stars in H II Region Environments. Chondrule Crystallization Experiments. Formation of SiO2-rich Chondrules by Fractional Condensation. Refractory Forsterites from Murchison (CM2) and Yamato 81020 (CO3.0) Chondrites: Cathodoluminescence, Chemical Compositions and Oxygen Isotopes. Apparent I-Xe Cooling Rates of Chondrules Compared with Silicates from the Colomera Iron Meteorite. Chondrule Formation in Planetesimal Bow Shocks: Physical Processes in the Near Vicinity of the Planetesimal. Genetic Relationships Between Chondrules, Rims and Matrix. Chondrite Fractionation was Cosmochemical; Chondrule Fractionation was Geochemical. Chondrule Formation and Accretion of Chondrite Parent Bodies: Environmental Constraints. Amoeboid Olivine Aggregates from the Semarkona LL3.0 Chondrite. The Evolution of Solids in Proto-Planetary Disks. New Nickel Vapor Pressure Measurements: Possible Implications for Nebular Condensates. Chemical, Mineralogical and Isotopic Properties of Chondrules: Clues to Their Origin. Maximal Size of Chondrules in Shock-Wave Heating Model: Stripping of Liquid Surface in Hypersonic Rarefied Gas Flow. The Nature and Origin of Interplanetary Dust: High Temperature Components. Refractory Relic Components in Chondrules from Ordinary Chondrites. Constraints on the Origin of Chondrules and CAIs from Short-lived and Long-lived Radionuclides. The Genetic Relationship Between Refractory Inclusions and Chondrules. Contemporaneous Chondrule Formation Between Ordinary and Carbonaceous Chondrites. Chondrules and Isolated Grains in the Fountain Hills Bencubbinite. Implications of Chondrule Formation in a Gas of Solar Composition. Implications of Meteoritic Cl-36 Abundance for the Origin of Short-lived Radionuclides in the Early Solar System. Size Sorting and the Chondrule Size Spectrum. Comparative Study of Refractory Inclusions from Different Groups of Chondrites. In Situ Investigation of Mg Isotope Distributions in an Allende CAI by Combined LA-ICPMS and SIMS Analyses Photochemical Speciation of Oxygen Isotopes in the Solar Nebula.
Source record↗
Research on inert gas narcosis and air velocity effects on metabolic performance
The effects of air velocity on metabolic performance are studied by using high forced airflow in a closed environment as a mechanism to control the concentration of volatile animal wastes. Air velocities between 100 and 200 ft/min are without significant effects on the metabolism of rats. At velocities of 200 ft/min and above, oxygen consumption and CO2 production as well as food consumption increase. In most instances, the changes are on the order of 5-10%. At the same time, the RQ for the animals increases slightly and generally correlates well with oxygen consumption and CO2 production. Experiments on the nature of inert gas narcosis show that halothane and methoxyflurane are rather potent inhibitors of the NADH:O2 oxidoreductase system in rats. These experiments suggest that the mechanism of inert gas narcosis is not mandatorily related to a membrane surface phenomenon.
Source record↗
Laser induced asymmetry and inhomogeneous broadening of the microwave lineshape of a gas cell atomic frequency standard
The possibility of replacing the RF discharge lamp in a rubidium gas cell clock with a single mode laser diode is addressed. Since the short term stability of the rubidium frequency standard is limited by the shot noise of the photodetector, an increased signal-to-noise ratio due to more efficient laser diode optical pumping might improve the short term performance. Because the emission wavelength of the laser diode can be tuned, improved long term performance could be gained through the control of the light shift effect. However, due to the nature of the gas cell frequency standard, various physical phenomena are strongly coupled in their effect on the frequency output, and thus careful consideration must be given to any change in one parameter because of its interrelation with other parameters. Some investigations concerning the coupled effect of the optical and microwave fields in the rubidium atomic clock are reported. It is shown that this type of coupling is an important consideration for any attempt to incorporate a laser diode into a gas cell clock.
Camparo, J. C.↗