Search NASA⌕ Search

SEARCH · Search NASA

Results for “PD Control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Computational modeling predicts the stability of both Pd + and Pd2 + ion-exchanged into H-CHA

Passive NO x adsorbers (PNA) using Pd/zeolites have emerged as a promising solution for the reduction of cold-start emissions from vehicle exhaust. However, the nature of the active sites and the mechanisms underlying NO x adsorption in Pd/zeolites remain a subject of ongoing investigation. In this study, we employ quantum chemical simulations to investigate the structure of Pd species in cation-exchange sites at isolated Al and Al pairs in the 6-ring and 8-ring of the CHA framework before the introduction of NO x . Our calculations show that the speciation of Pd in these exchange sites strongly depends on the precise Al arrangement within the framework, as well as the operating conditions. Ionically dispersed Pd is found to be the most favorable species over a wide range of oxidizing and reducing conditions. Small oligomers of PdO and metallic Pd do not appear to be competitive at either isolated Al or Al pairs. Notably, our calculations show that ion exchange sites other than next–next–nearest neighbor Al pairs in the 6-ring will be preferentially occupied by Pd + instead of Pd 2+ . The stability of Pd + in the zeolite environment is an interesting contrast with its rareness in molecular Pd compounds. Nonetheless, a detailed analysis of the electronic structure shows that predicted Pd oxidation states are consistent with chemical intuition for all complexes investigated in this study. We also discuss the potential ambiguity in Pd characterization provided by typical experimental techniques such as XANES, EXAFS and UV-Vis, and highlight the need for additional EPR spectroscopy studies to further elucidate the initial Pd speciation in zeolites for PNA applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

How Deep and Hot was Earth's Magma Ocean? Combined Experimental Datasets for the Metal-silicate Partitioning of 11 Siderophile Elements - Ni, Co, Mo, W, P, Mn, V, Cr, Ga, Cu and Pd

Since approximately 1990 high pressure and temperature (PT) experiments on metal-silicate systems have showed that partition coefficients (D) for siderophile (iron-loving) elements are much different than those measured at low PT conditions. The high PT data have been used to argue for a magma ocean during growth of the early Earth. Initial conclusions were based on experiments and calculations for a small number of elements such as Ni and Co. However, for many elements only a limited number of experimental data were available then, and they only hinted at values of metal-silicate D's at high PT conditions. In the ensuing decades there have been hundreds of new experiments carried out and published on a wide range of siderophile elements. At the same time several different models have been advanced to explain the siderophile elements in the earth's mantle: a) intermediate depth magma ocean; 25-30 GPa, b) deep magma ocean; up to 50 GPa, and c) early reduced and later oxidized magma ocean. Some studies have drawn conclusions based on a small subset of siderophile elements, or a set of elements that provides little leverage on the big picture (like slightly siderophile elements), and no single study has attempted to quantitatively explain more than 5 elements at a time. The purpose of this abstract is to update the predictive expressions outlined by Righter et al. (1997) with new experimental data from the last decade, test the predictive ability of these expressions against independent datasets (there are more data now to do this properly), and to apply the resulting expressions to the siderophile element patterns in Earth's upper mantle. The predictive expressions have the form: lnD = alnfO2 + b/T + cP/T + d(1Xs) + e(1Xc) + SigmafiXi + g These expressions are guided by the thermodynamics of simple metal-oxide equilibria that control each element, include terms that mimic the activity coefficients of each element in the metal and silicate, and quantify the effect of variable oxygen fugacity. Preliminary results confirm that D(Ni) and D(Co) converge at pressures near 25-30 GPa and approximately 2200 K, and show that D(Pd) and D(Cu) become too low at the PT conditions of the deepest models. Furthermore, models which force fit V and Cr mantle concentrations by metal-silicate equilibrium overlook the fact that at early Earth mantle fO2, these elements will be more compatible in Mg-perovskite and (Fe,Mg)O than in metal. Thus an intermediate depth magma ocean, at 25-30 GPa, 2200 K, and at IW-2, can explain more mantle siderophile element concentrations than other models.

Righter, Kevin↗

Strong Damping‐Like Spin‐Orbit Torque and Tunable Dzyaloshinskii–Moriya Interaction Generated by Low‐Resistivity Pd 1− x Pt x Alloys

Abstract Despite their great promise for providing a pathway for very efficient and fast manipulation of magnetization, spin‐orbit torque (SOT) operations are currently energy inefficient due to a low damping‐like SOT efficiency per unit current bias, and/or the very high resistivity of the spin Hall materials. This work reports an advantageous spin Hall material, Pd 1− x Pt x , which combines a low resistivity with a giant spin Hall effect as evidenced with three independent SOT ferromagnetic detectors. The optimal Pd 0.25 Pt 0.75 alloy has a giant internal spin Hall ratio of >0.60 (damping‐like SOT efficiency of ≈0.26 for all three ferromagnets) and a low resistivity of ≈57.5 µΩ cm at a 4 nm thickness. Moreover, it is found that the Dzyaloshinskii–Moriya interaction (DMI), the key ingredient for the manipulation of chiral spin arrangements (e.g., magnetic skyrmions and chiral domain walls), is considerably strong at the Pd 1− x Pt x /Fe 0.6 Co 0.2 B 0.2 interface when compared to that at Ta/Fe 0.6 Co 0.2 B 0.2 or W/Fe 0.6 Co 0.2 B 0.2 interfaces and can be tuned by a factor of 5 through control of the interfacial spin‐orbital coupling via the heavy metal composition. This work establishes a very effective spin current generator that combines a notably high energy efficiency with a very strong and tunable DMI for advanced chiral spintronics and spin torque applications.

Zhu, Lijun↗

Synthesis Methods, Microscopy Characterization and Device Integration of Nanoscale Metal Oxide Semiconductors for Gas Sensing in Aerospace Applications

A comparison is made between SnO2, ZnO, and TiO2 single-crystal nanowires and SnO2 polycrystalline nanofibers for gas sensing. Both nanostructures possess a one-dimensional morphology. Different synthesis methods are used to produce these materials: thermal evaporation-condensation (TEC), controlled oxidation, and electrospinning. Advantages and limitations of each technique are listed. Practical issues associated with harvesting, purification, and integration of these materials into sensing devices are detailed. For comparison to the nascent form, these sensing materials are surface coated with Pd and Pt nanoparticles. Gas sensing tests, with respect to H2, are conducted at ambient and elevated temperatures. Comparative normalized responses and time constants for the catalyst and noncatalyst systems provide a basis for identification of the superior metal-oxide nanostructure and catalyst combination. With temperature-dependent data, Arrhenius analyses are made to determine an activation energy for the catalyst-assisted systems.

VanderWal, Randy L.↗

Highly Siderophile Element Abundances in Martian Meteorites

Critical evaluation of new and literature data for highly siderophile elements (HSE) in Martian (SNC) meteorites allows several first order conclusions to be drawn. (i) Re concentrations in SNC meteorites are nearly constant (within a factor of two) and do not correlate with rock type. Exceptions to this rule are Chassigny and Dar al Gani (DaG) 476, both of which are inferred to have experienced terrestrial Re contamination. (ii) Fractionations between Rh and Pd are small. Excluding Shergotty, the Rh/Pd ratio of the SNC suite is 0.22\pm0.05. (iii) Os and Ir contents vary by about four orders of magnitude; and positive correlations with MgO, Cr, and Ni suggest that these variations are not controlled by sulfide fractionation. A possible exception is the orthopyroxenite ALH84001, whose HSE's (including Ni, which is compatible in opx) are very low. (iv) Zagami, Shergotty, and Nakhla have nearly identical HSE signatures. Shergotty and Zagami have experienced assimilation-fractional crystallization (AFC) and have "crustal" Sr and Nd isotopic signatures. Conversely, the Nakhla parent was a small degree partial melt of a depleted mantle that interacted little with the Martian crust. These observations suggest that "evolved" HSE signatures can be produced by either fractional crystallization or small degrees of partial melting. (v) Chassigny and other mafic SNC's have HSE signatures that are very distinct from those of Nakhla-Zagami-Shergotty. The HSE elemental ratios of mafic SNC's approach chondritic, implying that the Martian mantle has nearly chondritic relative abundances of the HSE's. (vi) This chondritic HSE signature is observed in SNC's of various ages, suggesting that this is an ancient feature that has not evolved over time. (vii) No correlation is observed between HSE's and signatures of crustal contamination (e.g., Sr isotopes), indicating that the HSE signatures of the SNC suite are not derived from the crust. (vii) The Ru/Pd for the SNC suite ratio is about 0.5 chondritic. We attribute this depletion of Ru to the presence of spinel in the SNC source regions. (viii) Assignment of this depletion of Ru to spinel seems to also imply that spinel is not the cause of Os and Ir fractionations, requiring some other mafic phase to account for the observed variations. -----.

Jones, J. H.↗

Dual-site catalysts featuring platinum-group-metal atoms on copper shapes boost hydrocarbon formations in electrocatalytic CO2 reduction

Abstract Copper-based catalyst is uniquely positioned to catalyze the hydrocarbon formations through electrochemical CO 2 reduction. The catalyst design freedom is limited for alloying copper with H-affinitive elements represented by platinum group metals because the latter would easily drive the hydrogen evolution reaction to override CO 2 reduction. We report an adept design of anchoring atomically dispersed platinum group metal species on both polycrystalline and shape-controlled Cu catalysts, which now promote targeted CO 2 reduction reaction while frustrating the undesired hydrogen evolution reaction. Notably, alloys with similar metal formulations but comprising small platinum or palladium clusters would fail this objective. With an appreciable amount of CO-Pd 1 moieties on copper surfaces, facile CO * hydrogenation to CHO * or CO-CHO * coupling is now viable as one of the main pathways on Cu(111) or Cu(100) to selectively produce CH 4 or C 2 H 4 through Pd-Cu dual-site pathways. The work broadens copper alloying choices for CO 2 reduction in aqueous phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluation of Mn and Sn-Modified Pd-Ce-Based Catalysts for Low-Temperature Diesel Exhaust Oxidation

Pd-impregnated Ce-based catalysts were tested for carbon monoxide (CO) and hydrocarbon (HC) oxidation under challenging low-temperature diesel combustion conditions. The results indicate that the light-off temperatures for CO over Pd/CeO 2 , Pd/MnO x -CeO 2 (Pd/MC), and Pd/SnO 2 -MnO x -CeO 2 (Pd/SMC) catalysts shift to higher temperatures in the presence of simulated diesel exhaust gas. The lowest T 50 for CO is observed over Pd/MC at 173 °C, whereas Pd/CeO 2 is shown to oxidize most of the HCs at temperatures below 400 °C. In all catalysts, the oxidation of HCs starts right after the onset of CO oxidation, revealing that the competitive adsorption of CO, NO, and alkenes controls the catalytic activity. Further evaluation of the catalytic activity in the presence of only CO and C 3 H 6 reveals the immediate inhibiting effect of C 3 H 6 at catalyst temperatures below 150 °C. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) experiments performed over Pd/CeO 2 , Pd/MC, and Pd/SMC show that C 3 H 6 inhibits the formation of carbonyl species on Pd n+ sites, which limits the catalytic activity for CO. Lastly, such inhibition is observed on all supports, implying that the activity is independent of oxygen storage capacity (OSC) or lattice oxygen reducibility of the supports in the presence of C 3 H 6 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dose-rate controlled energy dispersive x-ray spectroscopic mapping of the metallic components in a biohybrid nanosystem

In this work, we showcase that through precise control of the electron dose rate, state-of-the-art large solid angle energy dispersive X-ray spectroscopy (EDS) mapping in aberration-corrected scanning transmission electron microscope (STEM) is capable of faithful and unambiguous chemical characterization of the Pt and Pd distribution in a peptide-mediated nanosystem. This low-dose-rate recording scheme adds another dimension of flexibility to the design of elemental mapping experiments, and holds significant potential for extending its application to a wide variety of beam sensitive hybrid nanostructures.

composition mapping↗

Magneto-optic superlattice thin films: Fabrication, structural and magnetic characterization

During this quarter studies were extended to determine the electronic contribution to the perpendicular interface anisotropy in Co-based multilayers. Using in situ Kerr effect measurements, the influences of different transition metals (TM = Ag, Au, Cu, and Pd) on the magnetic properties of single-crystal Co films grown on Pd (111) and Au (111) surfaces are investigated. Last quarter the discovery of a large peak in the perpendicular anisotropy when approximately one monolayer of Cu or Ag is deposited on the Co surface was reported. We now have added a computer-controlled stepper-motor drive to our MBE sample transfer mechanism. The motor allows us to move the sample at a constant velocity from behind a shutter during deposition. The film, therefore, is deposited as a wedge with a linear variation of thickness across the substrate. In this way, a continuous range of coverage on a single sample is studied. The stepper motor also provides the necessary control for precisely positioning the sample in the laser beam for Kerr effect measurements at the different coverages.

Falco, C. M.↗

The effects of SO 2 exposure on three-way catalysts for passive SCR operation

We report efficient lean-burn gasoline engines cannot employ traditional three-way catalysts (TWCs) to control NO X emissions due to excess oxygen. Passive selective catalytic reduction (pSCR) is a process designed to control NOx by generating NH 3 over the TWC during fuel-rich operation, storing it on a downstream SCR, and then converting NOx during fuel-lean operation. This work is focused on studying sulfur effects on this promising strategy. Two hydrothermally-aged commercial catalysts were studied for their effectiveness in the presence of SO 2 : a Pd-based TWC and a TWC with NO X storage. The sulfated samples were evaluated in a flow reactor under pSCR conditions and with targeted reactions. SO 2 inhibited the water gas shift and steam reforming reactions, decreasing (but not eliminating) NH 3 production; however, initial activity is recoverable after a simple thermal treatment at 650 °C. This work will prove valuable in understanding, mitigating, and even reversing the effects of SO 2 inhibition on real pSCR systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Concurrent Chemoradiation Therapy Followed by Consolidation Chemotherapy for Localized Extranodal Natural Killer/T-Cell Lymphoma, Nasal Type

Purpose: To evaluate the effectiveness of concurrent chemoradiation therapy (CCRT) with 40 Gy followed by consolidation chemotherapy for localized extranodal natural killer (NK)/T-cell lymphoma (ENKTL), nasal type. Methods and Materials: From August 2004 to August 2012, 62 patients with newly diagnosed stage IE to IIE ENKTL underwent CCRT followed by consolidation chemotherapy. The median RT dose was 40 Gy. Cisplatin, 30 mg/m{sup 2}, was administered weekly during the RT course. Responders to CCRT were encouraged to undergo consolidation chemotherapy. Three different consolidation chemotherapy regimens were used consecutively: VIPD (etoposide, ifosfamide, cisplatin, and dexamethasone); VIDL (etoposide, ifosfamide, and dexamethasone followed by intramuscular injection of L-asparaginase); and MIDLE (methotrexate, etoposide, ifosfamide, mesna, and L-asparaginase). Results: The median follow-up period was 49 months (range 8-112). After completion of CCRT, 56 patients (90.3%) had a complete response, 4 (6.4%) had a partial response, 1 (1.6%) had stable disease, and 1 patient (1.6%) had progressive disease (PD). Consolidation chemotherapy was recommended to 61 patients, after excluding the patient with PD, but was actually delivered to 58. Of these 58 patients, 56 (96.5%) had a complete response and 2 (3.5%) had PD. During the follow-up period, 17 patients (including 3 with PD) experienced progression. The median interval to progression was 11 months (range 1-61). Local failure developed in 6 patients, of whom, 2 had developed progression outside the RT field. For all patients, the 3-year overall survival, progression-free survival, and local control rates were 83.1%, 77.1%, and 92.4%, respectively. Grade ≥3 nonhematologic toxicity developed in only 3 patients (4.8%). Conclusions: Excellent clinical outcomes were achieved using CCRT with 40 Gy followed by consolidation chemotherapy. Additional investigation, however, is warranted to confirm our findings.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Impregnation of Catalytic Metals in Single-Walled Carbon Nanotubes for Toxic Gas Conversion in Life Support System

Carbon nanotubes (CNTs) possess extraordinary properties such as high surface area, ordered chemical structure that allows functionalization, larger pore volume, and very narrow pore size distribution that have attracted considerable research attention from around the world since their discovery in 1991. The development and characterization of an original and innovative approach for the control and elimination of gaseous toxins using single walled carbon nanotubes (SWNTs) promise superior performance over conventional approaches due to the ability to direct the selective uptake of gaseous species based on their controlled pore size, increased adsorptive capacity due to their increased surface area and the effectiveness of carbon nanotubes as catalyst supports for gaseous conversion. We present our recent investigation of using SWNTs as catalytic supporting materials to impregnate metals, such as rhodium (Rh), palladium (Pd) and other catalysts. A protocol has been developed to oxidize the SWNTs first and then impregnate the Rh in aqueous rhodium chloride solution, according to unique surface properties of SWNTs. The Rh has been successfully impregnated in SWNTs. The Rh-SWNTs have been characterized by various techniques, such as TGA, XPS, TEM, and FTIR. The project is funded by a NASA Research Announcement Grant to find applications of single walled nanocarbons in eliminating toxic gas Contaminant in life support system. This knowledge will be utilized in the development of a prototype SWNT KO, gas purification system that would represent a significant step in the development of high efficiency systems capable of selectively removing specific gaseous for use in regenerative life support system for human exploration missions.

Li, Jing↗

Chemosaturation Percutaneous Hepatic Perfusion (CS-PHP) with Melphalan: Evaluation of 2D-Perfusion Angiography (2D-PA) for Leakage Detection of the Venous Double-Balloon Catheter

Purpose: To evaluate the feasibility of 2D-perfusion angiography (2D-PA) for detecting leakage of the double-balloon catheter used for chemosaturation percutaneous hepatic perfusion (CS-PHP). Materials and Methods: Overall, 112 CS-PHP (09/2015-09/2018) in 52 patients were retrospectively screened for leakage alongside the double-balloon catheter on standard venograms. Finally, 18 procedures with visually detected leakage were included. Fifteen consecutive procedures without leakage served as control. To evaluate 2D-PA for leakage detection, the acquired digital subtraction venograms were post-processed. For each balloon, two different target ROIs were evaluated to assess a possible impact of localization and shape of the ROIs. Time to peak (TTP), peak density (PD), area under the curve (AUC), and ratios of target ROI/reference ROIs (PD{sub tROI}/PD{sub REF}; AUC{sub tROI}/AUC{sub REF}; and TTP{sub tROI}/TTP{sub REF}) were calculated. Results: Leakages were located as follows: 15/18 cranial and 3/18 caudal. At the cranial balloon both ROIs showed a significant decrease in PD{sub tROI}/PD{sub REF} and AUC{sub tROI}/AUC{sub REF} (ROI1: p < 0.0001; p < 0.0001; ROI2: p < 0.0001; p < 0.0001) and a significant increase in TTP{sub tROI}/TTP{sub REF} (ROI1: p = 0.0009; ROI2: p = 0.0003) after double-balloon correction. Following balloon adjustment, the 2D-PA ratios (PD and AUC) of the tested ROIs differed significantly (p < 0.05). The inter-individual comparison of the 2D-PA parameters of the group with leakage before balloon correction and the non-leakage group showed significantly different 2D-PA values for the cranial balloon in both ROIs (p < 0.05). No significant differences were found for the caudal balloon. Conclusion: 2D-PA provides a feasible tool for detecting leakages alongside the cranial portion of the double-balloon catheter used in CS-PHP. The shape and position of the ROIs used to assess perfusion and flow have an impact on the measurements.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Atomic Layer Deposition for Enhanced Reactivity, Stability, and Sulfur Tolerance of Hydrogenation Catalysts

Heterogeneous catalysts are an essential tool in the transition towards a sustainable, bio-based economy for fuels and chemicals. However, many key biomass conversion processes utilize harsh conditions that lead to nanoparticle sintering, support collapse, and metal leaching in conventional PGM catalysts. Active site poisoning resulting from the relatively high sulfur content of most biomass feedstocks further compounds these durability problems. Next-generation catalysts must be developed to address these stability challenges. In this work, we have used atomic layer deposition (ALD), to modify a conventional Pd/Al2O3 hydrogenation catalyst and generate improvements in its stability and sulfur tolerance, as well as overall catalyst activity. Ten cycles of TiO2ALD were applied to Pd/Al2O3 using a proprietary coating process developed by industry partners. The coated catalyst (10cTiO2), alongside uncoated Pd/TiO2 and Pd/Al2O3 controls, was characterized in-depth and naphthalene hydrogenation was used as a probe reaction to assess activity. The 10cTiO2 catalyst was observed to be significantly more active towards hydrogenation than uncoated Pd/Al2O3, despite evidence that the ALD coating suppressed chemisorption uptake through coverage of Pd. In order to reconcile these seemingly contradictory findings, interactions between the Pd nanoparticles and TiO2ALD coating were investigated via XAS and computational modeling. The catalysts were also assessed for their sulfur tolerance, thermal stability, and hydrothermal stability. Each of these catalyst stability parameters was enhanced by application of the TiO2ALD layer; the mechanisms by which the layer may have mitigated these degradation processes will be discussed. ALD technology holds great potential in the development of next-generation catalysts for biofuels and bioproducts and this work constitutes an important examination of the expected and unexpected benefits of applying TiO2ALD coatings to supported Pd hydrogenation catalysts.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Subsurface hydrogen, curvature, and strain: lessons from electro-reduction of benzaldehyde on nano-structured Pd catalysts

The unique ability of palladium (Pd) to absorb hydrogen and form a bulk hydride is vital for chemical transformations that involve hydrogenation reactions. Nano-structured Pd catalysts offer a promise of tuning these reaction rates by exploiting variations of reactant binding energies depending on the surface structure and morphological constraints that result in inhomogeneous strain. However, the interplay between the nano-structure of Pd and the ability of Pd to adsorb (and absorb) hydrogen as well as other reactive species needs to be better understood for a rational understanding of competitive chemical transformations at Pd surfaces. We consider the effects of the surface corrugation, strain, and subsurface Pd hydride on the reduction of benzaldehyde to benzyl alcohol in two qualitatively different samples – Pd nanoparticles and Pd gels formed by quasi-one-dimensional chains of these nanoparticles. Our electrochemical measurements and computational modelling suggest that surface concave sites, inherent to Pd gels, facilitate hydrogen transfer to the Pd subsurface region, thus weakening benzaldehyde binding to the surface. This effect is further modulated by the strain, depending on the local coordination environment on the corrugated surface. Furthermore, these findings demonstrate how structurally complex samples in the form of gels provide degrees of freedom for controlling the behavior of metal catalysts that are not available in isolated nanoparticles, which paves the way for new approaches in the design of catalytic materials and synthesis of metal hydrides.

Padavala, Sri Krishna Murthy [University of Minnes↗

Offset Compound Gear Drive

The Offset Compound Gear Drive is an in-line, discrete, two-speed device utilizing a special offset compound gear that has both an internal tooth configuration on the input end and external tooth configuration on the output end, thus allowing it to mesh in series, simultaneously, with both a smaller external tooth input gear and a larger internal tooth output gear. This unique geometry and offset axis permits the compound gear to mesh with the smaller diameter input gear and the larger diameter output gear, both of which are on the same central, or primary, centerline. This configuration results in a compact in-line reduction gear set consisting of fewer gears and bearings than a conventional planetary gear train. Switching between the two output ratios is accomplished through a main control clutch and sprag. Power flow to the above is transmitted through concentric power paths. Low-speed operation is accomplished in two meshes. For the purpose of illustrating the low-speed output operation, the following example pitch diameters are given. A 5.0 pitch diameter (PD) input gear to 7.50 PD (internal tooth) intermediate gear (0.667 reduction mesh), and a 7.50 PD (external tooth) intermediate gear to a 10.00 PD output gear (0.750 reduction mesh). Note that it is not required that the intermediate gears on the offset axis be of the same diameter. For this example, the resultant low-speed ratio is 2:1 (output speed = 0.500; product of stage one 0.667 reduction and stage two 0.750 stage reduction). The design is not restricted to the example pitch diameters, or output ratio. From the output gear, power is transmitted through a hollow drive shaft, which, in turn, drives a sprag during which time the main clutch is disengaged.

Stevens, Mark A.↗

Elucidating the factors controlling the methanol synthesis from CO 2 on ZnPd-ZnO/TiO 2 catalysts prepared by direct/inverse impregnation

The direct hydrogenation of CO 2 to methanol over supported ZnPd intermetallic catalysts remains a challenge due to the complex nature of the active sites, which are highly dependent on both the dispersion of ZnPd intermetallics and their proximity to ZnO. This study investigates the effect of the Pd and Zn incorporation order on methanol synthesis over TiO 2 -supported ZnPd catalysts. Catalysts were prepared via direct (Pd/Zn), inverse (Zn/Pd), and co-impregnation (Pd+Zn) methods using anatase TiO 2 as the support. Comprehensive characterization by XRD, HRTEM, CO-DRIFTS and XPS revealed that the formation of small and crystalline intermetallic β-ZnPd particles and their interaction with ZnO/ZnO x depends on the sequence of Pd and Zn incorporation. It was found that, under the reaction conditions, the ZnO x species plays a critical role in facilitating the formation of the intermetallic ZnPd through the interactions between Pd and ZnO x . In addition, ZnO x species have also been shown to modulate key catalytic properties, such as CO 2 activation and methanol selectivity. Specifically, the ZnPd/Pd surface ratio, determined by Pd dispersion and proximity to ZnO/ZnO x , was shown to determine the methanol production from CO 2 directly or via a CO intermediate. The Pd/Zn catalyst showed superior selectivity due to the in-situ formation of intermetallic species facilitated by Pd-ZnO x interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coupling sensor to enzyme in the voltage sensing phosphatase

Voltage-sensing phosphatases (VSPs) dephosphorylate phosphoinositide (PIP) signaling lipids in response to membrane depolarization. VSPs possess an S4-containing voltage sensor domain (VSD), resembling that of voltage-gated cation channels, and a lipid phosphatase domain (PD). The mechanism by which voltage turns on enzyme activity is unclear. Structural analysis and modeling suggest several sites of VSD-PD interaction that could couple voltage sensing to catalysis. Voltage clamp fluorometry reveals voltage-driven rearrangements in three sites implicated earlier in enzyme activation—the VSD-PD linker, gating loop and R loop—as well as the N-terminal domain, which has not yet been explored. N-terminus mutations perturb both rearrangements in the other segments and enzyme activity. Our results provide a model for a dynamic assembly by which S4 controls the catalytic site.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗