SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
An image processing program is reported to analyze the high resolution images obtained by the balloon borne 36 in. diameter stratoscope 2 telescope. A film recording device is described which is capable of converting numerical data from the computer into photographic images.
Film injection from discrete holes in a three-row, staggered array with five-diameter spacing was studied for three hole angles: (1) normal, (2) slanted 30 deg to the surface in the direction of the main stream, and (3) slanted 30 deg to the surface and 45 deg laterally to the main stream. The ratio of the boundary layer thickness-to-hole diameter and Reynolds number were typical of gas-turbine film-cooling applications. Detailed streaklines showing the turbulent motion of the injected air were obtained by photographing very small neutrally buoyant, helium-filled soap bubbles which follow the flow field.
Tubular tee is intersected at its junction by a reflecting/transmitting mirror angled to provide two images of an object for simultaneous photographing from two positions. This method is used when space and focal conditions are limited.
Elliptical patterns on emission lines of argon plasma jets attributed to antihalation backing during hypersensitization of film
The author has identified the following significant results. Shadow enhancement of topographic linears in photographic or scanner images is a valuable tool for interpretation of geologic structures. Whether linears will be enhanced or subdued depends on sun angle and azimuth. The relationship of the sun's attitude to topographic slopes determines which trends are available for interpretation in existing imagery, and it can be used to select the time of day, surface properties, and film and filter characteristics in planning aircraft flights or satellite orbital passes. The technique of selective shadow enhancement can be applied to all photographic or imaging experiments, but its best for snow-covered scenes, side-looking radar images, and painted relief models.
Shadow enhancement of topographic linears in photographic or scanner images is a valuable tool for interpretation of geologic structures. Whether linears will be enhanced or subdued depends on sun angle and azimuth. The relationship of the sun's attitude to topographic slopes determines which trends are available for interpretation in existing imagery, and it can be used to select the time of day, surface properties, and film and filter characteristics in planning aircraft flights or satellite orbital passes. The technique of selective shadow enhancement can be applied to all photographic or imaging experiments, but is best for snow-covered scenes, side-looking radar images, and painted relief models.
The use of recutting remote sensing was demonstrated for location of shipwrecks in the Florida Keys, using selected films and filters for improved water penetration.
The author has identified the following significant results. Field studies of the initiation of river flow onto the frozen Arctic Ocean were made by a group of scientists from May 15 to June 10, 1972. A time lapse camera mounted on a 40-ft. tower near the mouth of the Kaparuk River, west of Prudhoe Bay, provided a detailed 10-day record (24 hours a day) of flow direction and water level. It is believed that wind build-up, discharge variance of the river, and through-ice drainage rates are the prime factors influencing overflow onto the sea ice. Current meter, transmissometer, temperature, salinity, and thermoprobe data were collected from holes drilled in the shorefast ice from seal holes and from the river water overflow. Depth and a real distribution of the overflow water were monitored from the ice using snowmobiles, and from the air using helicopters and fixed-wing aircraft. Photographic records were made on 35mm KII, KX, Ektachrome IR, Plus X, and IR black and white film. A simple two camera frame permitted simultaneous exposures of two types of film. Preliminary comparisons of the IR and conventional films, both color and black and white, showed no advantage to using the infrared film. However, the low altitude photography taken during this study will be very helpful in the interpretation of ERTS-1 imagery.
A detailed description is given of the methods of choose the duplication film and chemistry currently used in the NASA-ERTS Ground Data Handling System. The major ERTS photographic duplication goals are given as background information to justify the specifications for the desirable film/chemistry combination. Once these specifications were defined, a quantitative evaluation program was designed and implemented to determine if any recommended combinations could meet the ERTS laboratory specifications. The specifications include tone reproduction, granularity, MTF and cosmetic effects. A complete description of the techniques used to measure the test response variables is given. It is anticipated that similar quantitative techniques could be used on other programs to determine the optimum film/chemistry consistent with the engineering goals of the program.
The study demonstrates a behavioral effect of selective sleep disturbance in normal human subjects. Ten male subjects were selectively REM-deprived for two nights by awakening them at the onset of REM sleep. In addition, there were baseline and non-REM awakening conditions. Heightened sexual interest was defined by the number of film frames (using a Mackworth camera) in which subjects fixated on parts of the female figure in photographs. The largest mean difference in sexual interest was found between baseline and REM-deprivation. Both the non-REM awakenings and REM-sleep deprivation enhanced sexual interest. The failure to demonstrate a significant difference between REM-deprivation and non-REM awakenings may be due to the fact that subjects were REM-sleep-deprived in both conditions. It is suggested that REM-sleep loss may lead to increased selective attention and preoccupation with any cues which are usually interesting.
A tribology experiment in zero gravity was performed during the orbital flight of Spacelab 1 to study the motion of liquid lubricants over solid surfaces. The absence of a significant gravitational force facilitates observation of such motions as controlled by interfacial and capillary forces. Two experimental configurations were used. One deals with the liquid on one solid surface, and the other with the liquid between a pair of closed spaced surfaces. Time sequence photographs of fluid motion on a solid surface yielded spreading rate data of several fluid-surface combinations. In general, a slow spreading process as governed by the tertiary junction can be distinguished from a more rapid process which is driven by surface tension controlled internal fluid pressure. Photographs were also taken through the transparent bushings of several experimental journal bearings. Morphology of incomplete fluid films and its fluctuation with time suggest the presence or absence of unsteady phenomena of the bearing-rotor system in various arrangements.
Space photography, camera-film systems and TV/videotape systems for space environments
Previsual detection of Fomes annosus in pine plantations was studied. Detailed analyses of photographic imagery obtained over the Ann Arbor Test Site during 1969 and 1970 reveal that the Ektachrome Infrared film was superior to Ektachrome Aerographic, Infrared Aerographic, or Plus-X Aerographic films for detecting Fomes annosus damage. Of far more significance in controlling the accuracy of damage detection, however, was the experience of the photo interpreter. Ratio-processing of multispectral scanner data was investigated with data collected in June of 1970 and in June of 1972. Ratioing of the 1.5-1.8 and 1.0-1.4 micrometer channels gave good results at detecting openings in the crown canopy and adjacent infected trees. Combined level slicing of the 1.5-1.8 micrometer channel and the 1.5-1.8 to 1.0-1.4 micrometer ratio permitted separation and recognition of forest litter in the openings and stressed trees adjacent ot the openings.
The scientific analyses of photographic data in astronomy obtained by the Apollo Orbital Science Photographic Team during Apollo flights 14 through 17 are described. Some of the tasks are the collection and correlation of Quick-Look listings, working prints for further study, the generation of post-mission reports, and project reports. Postflight calibrations of the flight photographic systems are carried out, and lens vignetting effects are corrected. The data handling is described and includes photodigitization of photographic scenes, calibrated step-wedges, and vignetting patterns, which are followed by computer program processing of the film density readings.
Images on developed photographic emulsions can be significantly intensified by making the image silver radioactive and exposing a second emulsion to this radiation. Because the print, an autoradiograph, reproduces the original with significant increases in density and contrast, the method can be used to enhance underexposed emulsions and to increase the limits of photographic detection. This paper reports a new, practical chemical method for activating the silver, using thiourea labeled with sulfur-35, a process convenient for use in photographic laboratories. Speed increases of 13 and contrast increases of 18 were achieved with Kodak Plus-X film in this initial phase.
The paper presents polycrystalline X-ray diffraction data for three high-pressure phases of InSb. The study employed two types of diamond-anvil pressure cells. The X-ray diffraction parameters were recorded at different fixed pressures and temperatures on flat film. The experiment utilized Zr-filtered Mo radiation. The intensities were estimated from the X-ray photographs using a semiautomated microdensitometer.
This microprocessor system was designed to control and annotate a Nikon 35 mm camera for the purpose of obtaining photographs and data at predefined time intervals. The single STD BUSS interface card was designed in such a way as to allow it to be used in either a stand alone application with minimum features or installed in a STD BUSS computer allowing for maximum features. This control system also allows the exposure of twenty eight alpha/numeric characters across the bottom of each photograph. The data contains such information as camera identification, frame count, user defined text, and time to .01 second.
The speckle camera in regular use at Kitt Peak National Observatory since 1974 is described in detail. The design of the atmospheric dispersion compensation prisms, the use of film as a recording medium, the accuracy of double star measurements, and the next generation speckle camera are discussed. Photographs of double star speckle patterns with separations from 1.4 sec of arc to 4.7 sec of arc are shown to illustrate the quality of image formation with this camera, the effects of seeing on the patterns, and to illustrate the isoplanatic patch of the atmosphere.