Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA DENSITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

A class of analytic solutions for the thermally balanced magnetostatic prominence sheet

A theoretical study is presented for the nonlinear interplay between magnetostatic equilibrium and energy balance in a Kippenhahn-Schlueter type solar prominence sheet. A class of theoretical models is presented, expressed in closed analytic forms, thus facilitating the direct illustration of the nonlinear physical properties. The model couples the equilibrium between magnetic field, plasma pressure, and weight on the one hand, with the balance between a rho-squared T radiative loss, a rho wave heating (where rho equals plasma density, and T equals plasma temperature), and thermal conduction channeled along magnetic field lines on the other. The steady solutions are divided into three classes, and are characterized by the total wave heating in the prominence sheet which is greater than, equal to, or less than the total radiative loss. The compaction of the plasma along the field lines, under its own weight, and the energy transport effects determine which of the three basic behaviors obtains in a particular situation. A discussion is presented of the implications of the steady solutions for the formation of prominences.

Low, B. C.↗
NASA NTRS1981

ISEE 1 observations of thermal plasma in the vicinity of the plasmasphere during periods of quieting magnetic activity

An investigation of thermal plasma behavior in the vicinity of the plasmasphere during periods of quieting magnetic activity was conducted by combining thermal ion observations made with the plasma composition experiment on ISEE 1 with plasma density profiles obtained from plasma frequency measurements made with the same satellite's plasma wave experiment. During periods in which the magnetic activity quiets, the two regions characterized by H(+):He(+):O(+) (isotropic) and H(+):O(+):He(+) (field-aligned) ion species distributions (in order of dominance) are separated by a new region in which low-energy H(+) and He(+) are found flowing along the magnetic field lines. At other times, following quieting magnetic activity, distributions having peak fluxes at 90 deg pitch angle are observed in this region.

Horwitz, J. L.↗
NASA NTRS1988

The effect of the solenoidal condition on the numerical magnetohydrodynamic simulation of coronal dynamics

Several MHD simulations of coronal dynamics performed more than 10 years ago violated the solenoidality condition for an 'open' magnetic field topology. Using an improved code, consideration is given to the effect on the physical validity of the numerical simulation (for a representative pulse disturbance) for the case when solenoidality is deliberately violated as compared to the case when it is preserved. It is found that the error incurred in this specific case ('open' topology) in the energy density and in the plasma density profiles is rather small and, hence, does not invalidate the earlier conclusions concerning mass and wave motion.

Wu, S. T.↗
NASA NTRS2006

Experimental Results of Thin-Film Photovoltaic Cells in a Low Density LEO Plasma Environment: Ground Tests

Plasma ground testing results, conducted at the Glenn Research Center (GRC) National Plasma Interaction (N-PI) Facility, are presented for a number of thin-film photovoltaic cells. The cells represent a mix of promising new technologies identified by the Air Force Research Laboratory (AFRL) under the CYGNUS Space Science Technology Experiment (SSTE-4) Program. The current ground tests are aimed at characterizing the performance and survivability of thin film technologies in the harsh low earth orbital space environment where they will be flown. Measurements of parasitic current loss, charging/dielectric breakdown of cover-slide coatings and arcing threshold tests are performed for each individual cell. These measurements are followed by a series of experiments designed to test for catastrophic arc failure mechanisms. A special type of power supply, called a solar array simulator (SAS) with adjustable voltage and current limits on the supply s output, is employed to bias two adjacent cells at a predetermined voltage and current. The bias voltage is incrementally ramped up until a sustained arc results. Sustained arcs are precursors to catastrophic arc failure where the arc current rises to a maximum value for long timescales often ranging between 30 to 100 sec times. Normal arcs by comparison, are short lived events with a timescale between 10 to 30 sec. Sustained arcs lead to pyrolization with extreme cell damage and have been shown to cause the loss of entire array strings in solar arrays. The collected data will be used to evaluate the suitability of thin-film photovoltaic technologies for future space operations.

Galofaro, Joel T.↗
NASA NTRS2015

Quasi-One-Dimensional Particle-in-Cell Simulation of Magnetic Nozzles

A method for the quasi-one-dimensional simulation of magnetic nozzles is presented and simulations of a magnetic nozzle are performed. The effects of the density variation due to plasma expansion and the magnetic field forces on ion acceleration are investigated. Magnetic field forces acting on the electrons are found to be responsible for the formation of potential structures which accelerate ions. The effects of the plasma density variation alone are found to only weakly affect ion acceleration. Strongly diverging magnetic fields drive more rapid potential drops.

Ebersohn, Frans H.↗
DOE OSTI2026

Role of Neutrals Versus Transport in Determining the Pedestal Density Structure: Final Technical Report

In fusion devices the plasma density plays a crucial role in determining the fusion reaction rate and has a direct impact on the fusion gain of a given device. This density is in general regulated by the particle sources and transport near the plasma edge, which give rise to an edge density pedestal. When predicting the performance of future devices, this density pedestal is often prescribed, rather than predicted, due to a lack of models which allow confident extrapolation. This project aims to advance these models through the focused validation of theoretical models related to the transport of fueling neutral particles, and through interpretive transport modeling in present day fusion plasmas, in which the penetration of neutrals is altered to better simulate future reactor-like conditions. Achievements in theory and model validation under this project have advanced our understanding of how much of the edge density profile is set by transport versus direct ionization, enabling interesting projections to future burning plasma devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Enhancement of mid-/high-Z impurity transport by continuous Li-granule dropping in a stellarator plasma

An enhancement of core impurity transport is observed in high-density plasmas of the stellarator large helical device, heated by neutral beam injection, when continuous lithium (Li) granule dropping is performed. In the reported experiments, in which the tracer-encapsulated solid pellet is employed to inject trace amounts of titanium (Ti) and molybdenum (Mo) into the plasma core, confinement times for these impurities are seen to reduce significantly when Li dropping is applied, this reduction being more notable for Mo. To gain some initial insight into these observations, simulations are performed using the drift-kinetic transport code SFINCS for the Mo case. These simulations indicate that, while neoclassical transport prevails for the main plasma components (electrons, majority ions, and low-Z impurities), the classical contribution appears dominant for transporting Mo impurities. In summary, this work reports the first experimental observation of the degradation of mid-Z and high-Z impurity confinement induced by the continuous dropping of Li granules into a high-density stellarator plasma. In the case of the Mo impurity, simulations suggest that classical transport is the key mechanism underlying the enhanced impurity transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

H - Ion Source RF Plasma Testing with 13 MHz and 27 MHz at the Spallation Neutron Source (SNS)

The baseline RF-driven H⁻ ion source configuration at the Spallation Neutron Source (SNS) facility uses a continuous wave (CW) 600 W 13 MHz RF system to ignite and maintain a low-density plasma inside the ion source vacuum chamber. After the continuous low-density 13 MHz plasma has been established, a pulsed (typical 1 ms pulse width and 60 Hz pulse repetition rate) 80 kW 2 MHz RF system is used to increase the plasma density to produce the pulsed H⁻ ion beam. Incremental upgrades and improvements to the SNS ion source systems have resulted in the ability to reliably operate an H⁻ ion source for SNS neutron production run cycles that can last up to four months. Conditions inside the SNS H⁻ ion source evolve throughout a four-month run cycle due to changes in impurity levels, sputtering, and erosion. As the internal ion source conditions change during the run cycle, there can also be changes in plasma stability and the 13 MHz RF power level required to ignite the plasma. This paper presents the preliminary results of testing performed on the SNS Ion Source Test Stand (ISTS) system where we looked at plasma ignition and plasma stability using 27 MHz RF in place of the baseline 13 MHz RF system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1986

Method of high-precision microsampled blood and plasma mass densitometry

The reliability of the mechanical oscillator technique for blood and plasma density measurements on samples of volumes less than 0.1 ml is examined, and a precision of 0.001 g/l is found if plasma-isodensic heparin solution and siliconized densitometers are employed. Sources of measurement errors in the density determinations include storage of plasma samples, inhomogeneity of blood samples, and density reading before adequate temperature equilibration. In tests of plasma sample storage, the best reproducibility was obtained with samples kept at 4 C. Linear correlations were found between plasma density and plasma protein concentration, blood density and blood hemoglobin concentration, and erythrocyte density and MCHC.

Hinghofer-Szalkay, H.↗
DOE OSTI2024

Proton deflectometry analysis in magnetized plasmas: Magnetic field reconstruction in one dimension

Proton deflectometry is used in magnetized high-energy-density plasmas to observe electromagnetic fields. Here we describe a reconstruction algorithm to recover the electromagnetic fields from proton fluence data in 1-D. The algorithm is verified against analytic solutions and applied to example data. Next, we study the role of source fluence uncertainty for 1-D reconstructions. We show that reconstruction boundary conditions can be used to constrain the source fluence profile and use this to develop a reconstruction using a specified pair of boundary conditions on the magnetic field. From these considerations, we experimentally demonstrate a hybrid mesh-fluence reconstruction technique where fields are reconstructed from fluence data in an interior region with boundary conditions supplied by direct mesh measurements at the boundary.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2012

Understanding the Impact of Return-Current Losses on the X-Ray Emission from Solar Flares

I obtain and examine the implications of one-dimensional analytic solutions for return-current losses on an initially power-law distribution of energetic electrons with a sharp low-energy cutoff in flare plasma with classical (collisional) resistivity. These solutions show, for example, that return-current losses are not sensitive to plasma density, but are sensitive to plasma temperature and the low energy cutoff of the injected nonthermal electron distribution. A characteristic distance from the electron injection site, x(sub rc), is derived. At distances less than x(sub rc) the electron flux density is not reduced by return-current losses, but plasma heating can be substantial in this region, in the upper, coronal part of the flare loop. Before the electrons reach the collisional thick-target region of the flare loop, an injected power-law electron distribution with a low-energy cutoff maintains that structure, but with a flat energy distribution below the cutoff energy, which is now determined by the total potential drop experienced by the electrons. Modifications due to the presence of collisional losses are discussed. I compare these results with earlier analytical results and with more recent numerical simulations. Emslie's 1980 conjecture that there is a maximum integrated X-ray source brightness on the order of 10(exp -15) photons per square centimeter per second per square centimeter is examined. I find that this is not actually a maximum brightness and its value is parameter dependent, but it is nevertheless a valuable benchmark for identifying return-current losses in hard X-ray spectra. I discuss an observational approach to identifying return-current losses in flare data, including identification of a return-current "bump" in X-ray light curves at low photon energies.

Holman, Gordon D.↗
NASA NTRS1990

Ionospheric chemical releases

Ionospheric plasma density irregularities can be produced by chemical releases into the upper atmosphere. F-region plasma modification occurs by: (1) chemically enhancing the electron number density; (2) chemically reducing the electron population; or (3) physically convecting the plasma from one region to another. The three processes (production, loss, and transport) determine the effectiveness of ionospheric chemical releases in subtle and surprising ways. Initially, a chemical release produces a localized change in plasma density. Subsequent processes, however, can lead to enhanced transport in chemically modified regions. Ionospheric modifications by chemical releases excites artificial enhancements in airglow intensities by exothermic chemical reactions between the newly created plasma species. Numerical models were developed to describe the creation and evolution of large scale density irregularities and airglow clouds generated by artificial means. Experimental data compares favorably with theses models. It was found that chemical releases produce transient, large amplitude perturbations in electron density which can evolve into fine scale irregularities via nonlinear transport properties.

Bernhardt, Paul A.↗
NASA NTRS1987

Propagation of charge-neutral beams in space - Modifications when negative ions are present

Two-dimensional (three velocity component) electrostatic simulations are used to investigate the properties of a charge-neutral beam consisting of H(+), H(-), and electrons which will be used in the Beams on Rockets (BEAR) experiment to be launched in late 1987 or early 1988. For cross-field injection and beam densities much greater than the ambient plasma density, the beam splits into two approximately charge-neutral beams: a H(+)-e(-) beam that propagates down the field lines and a H(+)-H(-) beam that propagates at nearly the initial beam velocity on time scales less than the ion gyroperiod. Because of this splitting, space-charge oscillations are induced in the H(+)-H(-) component, which lead to its breakup. At lower beam densities, particularly when the beam electron density is less than about the density of the ambient plasma, the ambient plasma response reduces the space-charge fields as the beam splits and the space-charge oscillations are suppressed.

Winglee, R. M.↗
NASA NTRS1980

The structure of the Jovian magnetotail from plasma wave observations

Plasma wave measurements from the outbound passes of Voyager 1 and 2 are used to study the plasma density and structure of the Jovian magnetotail. Two principal types of plasma waves are observed in the magnetotail, continuum radiation and narrowband emissions near the electron gyrofrequency. The low frequency cutoff of the continuum radiation can be used to determine the local electron density. Profiles of the electron density from the outbound passes of Voyager 1 and 2 provide evidence of a broad region of nearly uniform plasma density between the magnetopause and the inner corotating portion of the magnetosphere. We refer to this region as the boundary layer. Comparisons are made with other experimental and theoretical evidence for the existence of such a boundary layer inside the Jovian magnetosphere.

Gurnett, D. A.↗
NASA NTRS1990

AMPTE CCE observations of Pc 3-4 pulsations at L = 2-6

Magnetic field data acquired by the AMPTE CCE satellite from L = 2-6 are analyzed. A procedure was specially developed to reduce the artificial modulation and noise in magnetic field measurements, making it possible to detect Pc 3-4 pulsations with amplitudes only 1 nT or less, even for L values less than 3. A survey of 41 CCE passes in L = 2-6 and in the postnoon sector showed that the most commonly observed pulsations in this region were the east-west oscillations of magnetic field with clearly L-dependent frequencies; these are identified as the toroidal mode standing Alfven waves. A relationship was found between the pulsation frequency and plasma density, showing that the pulsation data can be used to estimate the plasma mass density in the inner magnetosphere.

Takahashi, Kazue↗