Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLUTONIUM OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Geochemical Simulations of Plutonium Redox Speciation at Increasing Ionic Strengths - 18567

In salt repositories like the Waste Isolation Pilot Plant (WIPP), reducing conditions are expected, supporting two aqueous species of plutonium: Pu(III) and Pu(IV). Of these states, Pu(III) is more soluble than Pu(IV). Because Pu behavior is uncertain in WIPP brines under reducing conditions, performance assessment calculations assume a 50/50 partitioning between the two, justified through calculations using dilute solutions. Recent experimental evidence suggests an increasing importance for Pu(III). To reexamine this assumption, we modeled Pu speciation in NaCl and dilute WIPP brine solutions equilibrated with a Pu solid, including PuO{sub 2} and Pu(OH){sub 3}. To maintain reducing conditions, sulfate and sulfide were added. Models were performed using PHREEQC and the Specific Ion Theory (SIT) database on dilutions ranging from 0.1 M to 3 M. Models were compared to calculations using the Pitzer database with PuO{sub 2} and with analogs Am(III) and Th(IV), all up to 11 M. Results indicate that under reducing conditions, Pu(III) concentrations increase with ionic strength and can be up to 80 fold higher than Pu(IV). While concentrations varied due to differences in solubility for each solid, Pu(IV) concentrations remained nearly constant in all solutions. Analogs showed similar trends, though Am(III) is 3 times more soluble than Pu(III) while Th(IV) is 6 times more soluble than Pu(IV). Pu(IV) concentrations using Pitzer calculations were similar to those with SIT. Our study indicates that assuming equivalent partitioning of Pu species may under-represent concentrations during a release. They also show that in PA calculations there is a need to consider redox state at high ionic strength rather than adopting an assumption of equal partitioning between the two charges. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Oxygen potential measurement and point defect chemistry of UO{sub 2}

Many studies on the oxygen potential of UO{sub 2} have been carried out so far. However, the oxygen potential data for UO{sub 2} near the stoichiometric composition in the high temperature region (1673-1873 K) are limited. Recently, Kato's group had investigated oxygen potential of (U, Pu)O{sub 2} as functions of Pu content, oxygen-to-metal (O/M) ratio and temperature. They evaluated the data based on defect chemistry. The UO{sub 2} data are fundamental to evaluate oxygen potential in UO{sub 2}-PuO{sub 2} solid solution. In this work, the oxygen potential data of UO{sub 2+x} were extended to the high temperature range of 1673-1873 K by gas equilibrium method. The measured data were analyzed based on a defect chemistry model. Kroeger-Vink's diagram were obtained in UO{sub 2+x}. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Custom Equipment Development for Processing of Surplus Plutonium

The Strategic Laboratory Assessment (SLA), a collaborative team of SRNL and ORNL personnel, has been established to advance the objectives of the Surplus Plutonium Disposition (SPD) Project, by identifying and developing technologies to accelerate disposition, reduce life cycle costs, minimize worker radiation exposure, improve worker safety, and minimize Surplus Plutonium Disposition Program risks. [1] The SLA team has identified can cutting and plutonium (Pu) oxide size reduction as two glovebox processes where technology enhancements would be valuable. The DOESTD-3013 package currently in use for Pu downblending requires cutting two nested cans before the inner convenience can that holds the Pu oxide may be accessed for further processing. A rotary tubing-style cutter is used for opening the 3013 packages within the glovebox. Collet changeouts are required between cutting of the outer and inner cans. The SLA team is currently developing and testing an adjustable-clamp can cutter design that eliminates collet changeouts and allows cutting of the outer and inner can at the same time, resulting in significant reduction of radiological dose and process time, as well as improved ergonomics. To meet the Pu oxide particle size requirement, size reduction of Pu oxide agglomerations must be performed within the process gloveboxes. The SLA team has identified jaw crushing technology as an alternative to the currently employed rotary mill. Jaw crusher advantages include reduced dust within the glovebox, increased batch sizes, and easier integration with other glovebox processes due to the flow-through nature of jaw crushing. Commercially manufactured jaw crushers are either too large and/or too heavy for implementation in the SPD gloveboxes, so the SLA team is developing and testing a custom jaw crusher to meet the needs of the SPD Project.

Krementz, Daniel [Savannah River National Laborato↗

Nuclear Criticality Control and Safety of Plutonium-Uranium Fuel Mixtures Outside Reactors

The ANSI/ANS 8.12 standard was first approved in July 1978. At that time, this edition was applicable to operations with plutonium-uranium oxide (MOX) fuel mixtures outside reactors and was limited to subcritical limits for homogeneous systems. The next major revision, ANSI/ANS-8.12-1987, included the addition of subcritical limits for heterogeneous systems. The standard was subsequently reaffirmed in February 1993. During late 1990s, substantial work was done by the ANS 8.12 Standard Working Group to re-examine the technical data presented in the standard using the latest codes and cross section sets. Calculations performed showed good agreement with the values published in the standard. This effort resulted in the reaffirmation of the standard in March 2002. The standard is currently in a maintenance mode. After 2002, activities included discussions to determine the future direction of the standard and to follow the MOX standard development by the International Standard Organization (ISO). In 2007, the Working Group decided to revise the standard to extend the areas of applicability by providing a wider range of subcritical data. The intent is to cover a wider domain of MOX fuel fabrication and operations. It was also decided to follow the ISO MOX standard specifications (related to MOX density and isotopics) and develop a new set of subcritical limits for homogeneous systems. This has resulted in the submittal (and subsequent approval) of the project initiation notification system form (PINS) in 2007.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Characterization of Pu-238 heat source granule containment

The Milliwatt Radioisotopic Thermoelectric Generator (RTG) provides power for permissive-action links. These nuclear batteries convert thermal energy to electrical energy using a doped silicon-germanium thermopile. The thermal energy is provided by a heat source made of {sup 238}Pu, in the form of {sup 238}PuO{sub 2} granules. The granules are contained in 3 layers of encapsulation. A thin T-111 liner surrounds the {sup 238}PuO{sub 2} granules and protects the second layer (strength member) from exposure to the fuel granules. The T-111 strength member contains the fuel under impact condition. An outer clad of Hastelloy-C protects the T-111 from oxygen embrittlement. The T-111 strength member is considered the critical component in this {sup 238}PuO{sub 2} containment system. Any compromise in the strength member is something that needs to be characterized. Consequently, the T-111 strength member is characterized upon it's decommissioning through Scanning Electron Microscopy (SEM), and Metallography. SEM is used in Secondary Electron mode to reveal possible grain boundary deformation and/or cracking in the region of the strength member weld. Deformation and cracking uncovered by SEM are further characterized by Metallography. Metallography sections are mounted and polished, observed using optical microscopy, then documented in the form of photomicrographs. SEM may further be used to examine polished Metallography mounts to characterize elements using the SEM mode of Energy Dispersive X-ray Spectroscopy (EDS). This paper describes the characterization of the metallurgical condition of decommissioned RTG heat sources.

36 MATERIALS SCIENCE↗

Pu speciation in actual and simulated aged wastes

X-ray Absorption Fine Structure Spectroscopy (XAFS) at the Pu L{sub II/III} edge was used to determine the speciation of this element in (1) Hanford Z-9 Pu crib samples, (2) deteriorated waste resins from a chloride process ion-exchange purification line, and (3) the sediments from two Waste Isolation Pilot Plant Liter Scale simulant brine systems. The Pu speciation in all of these samples except one is within the range previously displayed by PuO{sub 2+x-2y}(OH){sub y}{center_dot}zH{sub 2}O compounds, which is expected based on the putative thermodynamic stability of this system for Pu equilibrated with excess H{sub 2}O and O{sub 2} under environmental conditions. The primary exception was a near neutral brine experiment that displayed evidence for partial substitution of the normal O-based ligands with Cl{sup -} and a concomitant expansion of the Pu-Pu distance relative to the much more highly ordered Pu near neighbor shell in PuO{sub 2}. However, although the Pu speciation was not necessarily unusual, the Pu chemistry identified via the history of these samples did exhibit unexpected patterns, the most significant of which may be that the presence of the Pu(V)-oxo species may decrease rather than increase the overall solubility of these compounds. Several additional aspects of the Pu speciation have also not been previously observed in laboratory-based samples. The molecular environmental chemistry of Pu is therefore likely to be more complicated than would be predicted based solely on the behavior of PuO{sub 2} under laboratory conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A theoretical study of the ground state and lowest excited states of PuO0/+/+2 and PuO20/+/+2

The ground and excited states of neutral and cationic PuO and PuO2 have been studied with multiconfigurational quantum chemical methods followed by second order perturbation theory, the CASSCF/CASPT2 method. Scalar relativistic effects and spin-orbit coupling have been included in the treatment. As literature values for the ionization energy of PuO2 are in the wide range of ~;;6.6 eV to ~;;10.1 eV, a central goal of the computations was to resolve these discrepancies; the theoretical results indicate that the ionization energy is near the lower end of this range. The calculated ionization energies for PuO, PuO+ and PuO2+ are in good agreement with the experimental values.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Passive Time Coincidence Measurements with HEU and DU Metal Castings

A Department of Energy sponsored Oak Ridge National Laboratory/Y-12 National Security Complex program of passive time coincidence measurements has been initiated at Y-12 to evaluate the ability to determine the presence of high enriched uranium (HEU) and distinguish it from depleted uranium (DU). This program uses the Nuclear Materials Identification System (NMIS) without an active interrogation source. Previous passive NMIS measurements with Pu metal and Pu oxide have been successful in determining the Pu mass, assuming a known 240Pu content. The spontaneous fission of uranium metal is considerably lower than Pu and measurements of this type have been performed at Lawrence Livermore National Laboratory. This work presents results of measurements of HEU and DU metal castings using moderated 3He detectors.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Modulation of Tetravalent Actinide Oxalate Morphology through Organic Compounds

Spent nuclear fuel of pressurized water reactors mainly consists of uranium, plutonium, minor actinides and fission products. The long term radiotoxicity of wastes is mainly due to plutonium and minor actinides such as neptunium, americium and curium. So, in order both to reduce the radiotoxicity of the ultimate wastes and to save uranium resources, researches for current and new generations of nuclear plants focus on the recycling of plutonium and minor actinides, to fabricate new mixed oxides nuclear fuel pellets (MOX) or transmutation targets. In this aim, production of actinide oxides is necessary. Currently, according to the Purex process, the spent fuel is dissolved in nitric acid and then valuable actinides (uranium and plutonium) are separated and purified from fission products and minor actinides in the Areva plant 'La Hague'. The resulting plutonium nitric solution is converted into a solid phase by oxalic conversion: the oxalic precipitation is followed by the calcination of the obtained oxalate into plutonium oxide. Considering either the MOX fuel or the transmutation targets fabrication from actinide oxides, the control of the particle structure and microstructure is a key factor related to the ability of oxide powder to sinter and shape as pellets. In the oxalic conversion process, the morphology of the precipitated oxalate is strongly influenced by the precipitation conditions and is kept during the calcination from oxalate into oxide. In this context, the aim of this work is to control the morphology of the final actinide oxide by changing the oxalic precipitation conditions. A lot of possibilities can be considered to modulate the morphology of actinide oxalates. Numerous parameters such as temperature, pressure, the presence of a magnetic field, the operating process (seeding, emulsions)... can modify the precipitated particles shape. Additives are also able to play a major role at the precipitation stage by means of different mechanisms involving either complexation, surface covering or structure insertion. This study focuses on this way to modify the morphology of actinides oxalates.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Radiation damage and annealing in plutonium tetrafluoride

Plutonium tetrafluoride that was separated prior to 1966 at the Hanford Site in Washington State was analyzed at the Pacific Northwest National Laboratory (PNNL) in 2015 and 2016. The plutonium tetrafluoride, as received, was an off-normal color and considering the age of the plutonium, there were questions about the condition of the material. These questions had to be answered in order to determine the suitability of the material for future use or long-term storage. Therefore, Thermogravimetric/Differential Thermal Analysis and X-ray Diffraction evaluations were conducted to determine the plutonium’s crystal structure, oxide content, and moisture content; these analyses reported that the plutonium was predominately amorphous and tetrafluoride, with an oxide content near ten percent. Freshly fluorinated plutonium tetrafluoride is known to be monoclinic. During the initial Thermogravimetric/Differential Thermal analyses, it was discovered that an exothermic event occurred within the material near 414°C. X-ray Diffraction analyses were conducted on the annealed tetrafluoride. The X-ray Diffraction analyses indicated that some degree of recrystallization occurred in conjunction with the 414°C event. The following commentary describes the series of Thermogravimetric/Differential Thermal and X-ray Diffraction analyses that were conducted as part of this investigation at PNNL, in collaboration with the University of Utah Nuclear Engineering Program.

McCoy, Kaylyn↗

Implications of Plutonium isotopic separation on closed fuel cycles and repository design

Advances in laser enrichment may enable relatively low-cost plutonium isotopic separation. This would have large impacts on LWR closed fuel cycles and waste management. If Pu-240 is removed before recycling plutonium as mixed oxide (MOX) fuel, it would dramatically reduce the buildup of higher plutonium isotopes, Americium, and Curium. Pu-240 is a fertile material and thus can be replaced by U-238. Eliminating the higher plutonium isotopes in MOX fuel increases the Doppler feedback, simplifies reactor control, and allows infinite recycle of MOX plutonium in LWRs. Eliminating fertile Pu-240 and Pu-242 reduces the plutonium content in MOX fuel and simplifies fabrication. Reducing production of Pu-241 reduces production of Am-241 - the primary heat generator in spent nuclear fuels after several decades. Reducing heat generating Am-241 would reduce repository cost and waste toxicity. Avoiding Am- 241 avoids its decay product Np-237, a nuclide that partly controls long-term oxidizing repository performance. Most of these benefits also apply to LWR plutonium recycled into fast reactors. There are benefits for plutonium isotopic separation in fast reactor fuel cycles (particularly removal of Pu-242) but the benefits are less. (author)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

SUPPORTING SAFE STORAGE OF PLUTONIUM-BEARING MATERIALS THROUGH SCIENCE, ENGINEERING AND SURVEILLANCE

Reductions in the size of the U. S. nuclear weapons arsenal resulted in the need to store large quantities of plutonium-bearing metals and oxides for prolonged periods of time. To assure that the excess plutonium from the U. S. Department of Energy (DOE) sites was stored in a safe and environmentally friendly manner the plutonium-bearing materials are stabilized and packaged according to well developed criteria published as a DOE Standard. The packaged materials are stored in secure facilities and regular surveillance activities are conducted to assure continuing package integrity. The stabilization, packaging, storage and surveillance requirements were developed through extensive science and engineering activities including those related to: plutonium-environment interactions and container pressurization, corrosion and stress corrosion cracking, plutonium-container material interactions, loss of sealing capability and changes in heat transfer characteristics. This paper summarizes some of those activities and outlines ongoing science and engineering programs that assure continued safe and secure storage of the plutonium-bearing metals and oxides.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Acidic dissolution behavior of U containing ZrO2–MgO ceramics

This study explores the possibility of dissolving zirconia-magnesia inert matrix fuel containing uranium oxide as a fissile material and plutonium homolog and erbium oxide as a burnable poison with nitric and sulfuric acid as a potential first step in a reprocessing scheme. The progress of the dissolution is followed by monitoring the amount of material in solution by inductively coupled plasma-atomic emission spectroscopy, assessing the speciation of the material by time resolved laser fluorescence spectroscopy, and determining and quantifying the crystalline phases present in the remaining residue by X-ray diffraction. This study has shown a linear incongruent dissolution of the cubic zirconia phase in concentrated nitric acid under certain chemical compositions, while the magnesium oxide phase is completely soluble. In sulfuric acid uranium, erbium, and magnesium are soluble to different extents while zirconium forms a colloidal suspension that conglomerates and settles out of solution. The feasibility of the dissolution of zirconia-magnesia inert matrix fuel with nitric and sulfuric acid for reprocessing is discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Systems Analysis of an Advanced Nuclear Fuel Cycle Based on a Modified UREX+3c Process

The research described in this report was performed under a grant from the U.S. Department of Energy (DOE) to describe and compare the merits of two advanced alternative nuclear fuel cycles -- named by this study as the “UREX+3c fuel cycle” and the “Alternative Fuel Cycle” (AFC). Both fuel cycles were assumed to support 100 1,000 MWe light water reactor (LWR) nuclear power plants operating over the period 2020 through 2100, and the fast reactors (FRs) necessary to burn the plutonium and minor actinides generated by the LWRs. Reprocessing in both fuel cycles is assumed to be based on the UREX+3c process reported in earlier work by the DOE. Conceptually, the UREX+3c process provides nearly complete separation of the various components of spent nuclear fuel in order to enable recycle of reusable nuclear materials, and the storage, conversion, transmutation and/or disposal of other recovered components. Output of the process contains substantially all of the plutonium, which is recovered as a 5:1 uranium/plutonium mixture, in order to discourage plutonium diversion. Mixed oxide (MOX) fuel for recycle in LWRs is made using this 5:1 U/Pu mixture plus appropriate makeup uranium. A second process output contains all of the recovered uranium except the uranium in the 5:1 U/Pu mixture. The several other process outputs are various waste streams, including a stream of minor actinides that are stored until they are consumed in future FRs. For this study, the UREX+3c fuel cycle is assumed to recycle only the 5:1 U/Pu mixture to be used in LWR MOX fuel and to use depleted uranium (tails) for the makeup uranium. This fuel cycle is assumed not to use the recovered uranium output stream but to discard it instead. On the other hand, the AFC is assumed to recycle both the 5:1 U/Pu mixture and all of the recovered uranium. In this case, the recovered uranium is reenriched with the level of enrichment being determined by the amount of recovered plutonium and the combined amount of the resulting MOX. The study considered two sub-cases within each of the two fuel cycles in which the uranium and plutonium from the first generation of MOX spent fuel (i) would not be recycled to produce a second generation of MOX for use in LWRs or (ii) would be recycled to produce a second generation of MOX fuel for use in LWRs. The study also investigated the effects of recycling MOX spent fuel multiple times in LWRs. The study assumed that both fuel cycles would store and then reprocess spent MOX fuel that is not recycled to produce a next generation of LWR MOX fuel and would use the recovered products to produce FR fuel. The study further assumed that FRs would begin to be brought on-line in 2043, eleven years after recycle begins in LWRs, when products from 5-year cooled spent MOX fuel would be available. Fuel for the FRs would be made using the uranium, plutonium, and minor actinides recovered from MOX. For the cases where LWR fuel was assumed to be recycled one time, the 1st generation of MOX spent fuel was used to provide nuclear materials for production of FR fuel. For the cases where the LWR fuel was assumed to be recycled two times, the 2nd generation of MOX spent fuel was used to provide nuclear materials for production of FR fuel. The number of FRs in operation was assumed to increase in successive years until the rate that actinides were recovered from permanently discharged spent MOX fuel equaled the rate the actinides were consumed by the operating fleet of FRs. To compare the two fuel cycles, the study analyzed recycle of nuclear fuel in LWRs and FRs and determined the radiological characteristics of irradiated nuclear fuel, nuclear waste products, and recycle nuclear fuels. It also developed a model to simulate the flows of nuclear materials that could occur in the two advanced nuclear fuel cycles over 81 years beginning in 2020 and ending in 2100. Simulations projected the flows of uranium, plutonium, and minor actinides as these nuclear fuel materials were produced and consumed in a fleet of 100 1,000 MWe LWRs and in FRs. The model also included recycle and reuse of extant inventories of spent LWR fuel. The results of the simulations allowed comparisons of the two fuel cycles from the standpoints of cost, non-proliferation, radiological health, wastes generated, and sustainability. Results of the research also provide insights regarding (i) multiple recycling of uranium and plutonium from spent MOX fuel in LWRs, (ii) costs and benefits of reenriching and reusing uranium from spent LWR fuel; (iii) effects of using uranium, plutonium, and minor actinides from LWR spent fuels to produce fuel for FRs; (iv) net rates of consumption (burning) in FRs of actinide elements produced in LWRs, and (v) ependencies of and interactions among the different systems of an advanced nuclear fuel cycle -- and the flows of nuclear materials between these systems.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Radiation-Induced Plutonium Redox Chemistry

Plutonium plays a key role in global actinide research and nuclear fuel cycle technologies, and yet, our fundamental understanding of its inherent radiation-induced chemical behavior is limited. These radiation-induced processes cannot simply be switched off, as they are as fundamentally inherent to plutonium as the impact of relativistic effects on its f-electrons. In less chemically complex actinide systems, such as aqueous solutions of neptunium and americium, , radiolysis products play a significant role in the redox cycling of their oxidation states. However, plutonium's multiple, coexisting, and chemically active oxidation states, which comprise of bare ions and dioxo cations, provide additional redox pathways that complicate radiation-induced processes. Oxidation state control is critical for the manipulation of plutonium, especially in used nuclear fuel reprocessing technologies, where oxidation specific states are successfully extracted, and others rejected. Consequently, mechanistically understanding the behavior of plutonium’s multiple oxidation states in the presence of intense ionizing radiation fields is essential for predicting the behavior of this element under multiple conditions that support the development and innovation of nuclear fuel cycle technologies. Here, we present recent advances in our understanding of plutonium radiation chemistry, including the first-ever multiscale model for predicting gamma radiation-induced plutonium redox chemistry, and new chemical kinetics for the reaction of plutonium and its complexes of tributyl phosphate (TBP), N,N-di-(2-ethylhexyl)butyramide (DEHBA), and N,N-di-(2-ethylhexyl)isobutyramide (DEHiBA) with transients radiolysis products, a measured using electron pulse radiolysis.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Thermophysical properties of α−Pu{sub 2}O{sub 3}: A new potential model

α−Pu{sub 2}O{sub 3} is an important material among plutonium based materials in nuclear industry. Pure plutonium surfaces quickly oxidizes into α−Pu{sub 2}O{sub 3} and PuO{sub 2} which are in the form of layers one on another. Here we have investigated thermal properties of α−Pu{sub 2}O{sub 3} by molecular dynamics simulation by using a partially ionic semi-empirical rigid ion potential. Mechanical properties, thermal expansion, and heat capacity are calculated. Results were compared with available experimental data and quantum calculation [2]. Due to the experimental limitations such as toxicity and radiation effects, studying the physical properties of such materials from molecular dynamics simulations have vital importance.

36 MATERIALS SCIENCE↗

Deployment Scenario of Heavy Water Cooled Thorium Breeder Reactor

Deployment scenario of heavy water cooled thorium breeder reactor has been studied. We have assumed to use plutonium and thorium oxide fuel in water cooled reactor to produce {sup 233}U which will be used in thorium breeder reactor. The objective is to analysis the potential of water cooled Th-Pu reactor for replacing all of current LWRs especially in Japan. In this paper, the standard Pressurize Water Reactor (PWR) has been designed to produce 3423 MWt; (i) Th-Pu PWR, (ii) Th-Pu HWR (MFR = 1.0) and (iii) Th-Pu HWR (MFR 1.2). The properties and performance of the core were investigated by using cell and core calculation code. Th-Pu PWR or HWR produces {sup 233}U to introduce thorium breeder reactor. The result showed that to replace all (60 GWe) LWR by thorium breeder reactor within a period of one century, Th-Pu oxide fueled PWR has insufficient capability to produce necessary amount of {sup 233}U and Th-Pu oxide fueled HWR has almost enough potential to produce {sup 233}U but shows positive void reactivity coefficient.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗