Search NASA⌕ Search

SEARCH · Search NASA

Results for “PRISMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

The Nature of the Nonsingularity of Inner Interfaces in Hydroxyapatite Ceramics

The morphology of inner interfaces in hydroxyapatite (HA) based calcium phosphate ceramics has been studied by transmission electron microscopy. Grain boundaries in the ceramics have been shown to have a vicinal character, which is related to the mechanism of secondary recrystallization in the material: layer growth of grains via sequential motion of elementary steps on planes corresponding to the {11̄00} HA prism faces, which grow through transitions of atoms from adjacent grains that are in contact through their planes with large Miller indices. The recrystallization process may be accompanied by a “collision” of vicinal growth surfaces of grains with relatively large misalignment angles and the formation of grain boundaries nanofaceted by prism planes of adjacent grains. The recrystallization process in such a case should be expected to continue in the grain with a smaller nonsingularity of the growth front. Grain boundaries may allow for a match between planes differing in Miller indices, nd{sub h1k1l1} ≈ md{sub h2k2l2}, and the formation of grain-boundary Pumphrey dislocations, which compensate for the size mismatch between interplanar spacings and/or misalignment of the planes. The observed characteristic grain match configurations are typical of both ceramics produced by sintering HA powders and HA films produced by ion sputtering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Developing new optical imaging techniques for single particle and molecule tracking in live cells

Differential interference contrast (DIC) microscopy is a far-field as well as wide-field optical imaging technique. Since it is non-invasive and requires no sample staining, DIC microscopy is suitable for tracking the motion of target molecules in live cells without interfering their functions. In addition, high numerical aperture objectives and condensers can be used in DIC microscopy. The depth of focus of DIC is shallow, which gives DIC much better optical sectioning ability than those of phase contrast and dark field microscopies. In this work, DIC was utilized to study dynamic biological processes including endocytosis and intracellular transport in live cells. The suitability of DIC microscopy for single particle tracking in live cells was first demonstrated by using DIC to monitor the entire endocytosis process of one mesoporous silica nanoparticle (MSN) into a live mammalian cell. By taking advantage of the optical sectioning ability of DIC, we recorded the depth profile of the MSN during the endocytosis process. The shape change around the nanoparticle due to the formation of a vesicle was also captured. DIC microscopy was further modified that the sample can be illuminated and imaged at two wavelengths simultaneously. By using the new technique, noble metal nanoparticles with different shapes and sizes were selectively imaged. Among all the examined metal nanoparticles, gold nanoparticles in rod shapes were found to be especially useful. Due to their anisotropic optical properties, gold nanorods showed as diffraction-limited spots with disproportionate bright and dark parts that are strongly dependent on their orientation in the 3D space. Gold nanorods were developed as orientation nanoprobes and were successfully used to report the self-rotation of gliding microtubules on kinesin coated substrates. Gold nanorods were further used to study the rotational motions of cargoes during the endocytosis and intracellular transport processes in live mammalian cells. New rotational information was obtained: (1) during endocytosis, cargoes lost their rotation freedom at the late stage of internalization; (2) cargoes performed train-like motion when they were transported along the microtubule network by motor proteins inside live cells; (3) During the pause stage of fast axonal transport, cargoes were still bound to the microtubule tracks by motor proteins. Total internal reflection fluorescence microscopy (TIRFM) is another non-invasive and far-field optical imaging technique. Because of its near-field illumination mechanism, TIRFM has better axial resolution than epi-fluorescence microscopy and confocal microscopy. In this work, an auto-calibrated, prism type, angle-scanning TIRFM instrument was built. The incident angle can range from subcritical angles to nearly 90°, with an angle interval less than 0.2°. The angle precision of the new instrument was demonstrated through the finding of the surface plasmon resonance (SPR) angle of metal film coated glass slide. The new instrument improved significantly the precision in determining the axial position. As a result, the best obtained axial resolution was ~ 8 nm, which is better than current existing instruments similar in function. The instrument was further modified to function as a pseudo TIRF microscope. The illumination depth can be controlled by changing the incident angle of the excitation laser beam or adjusting the horizontal position of the illumination laser spot on the prism top surface. With the new technique, i.e., variable-illumination-depth pseudo TIRF microscopy, the whole cell body from bottom to top was scanned.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Predictive Integrated Stratigraphic Modeling Report, Center-wide Per- and Polyfluoroalkyl Substances, Potential Release Location 237, Kennedy Space Center, FL

The National Aeronautics and Space Administration (NASA) is investigating the occurrence of per- and polyfluoroalkyl substances (PFAS) Center-wide at Kennedy Space Center (KSC), Merritt Island, Florida (Figure 1-1) as Potential Release Location 237. AECOM Technical Services, Inc. (AECOM) conducted investigation activities in 2020 and 2021 to develop a better understanding of the fate and transport of PFAS in groundwater and surface water at KSC center-wide using PRedictive Integrated Stratigraphic Modeling (PRISM). PRISM uses best practices from the fields of geology, hydrology, and chemistry to acquire a holistic understanding of the subsurface and more accurately predict contaminant migration pathways. Based on the potential magnitude (frequency and areal distribution) of PFAS impacts at KSC, the analyses described herein were designed to provide tools to address the unique behavior of PFAS chemicals.

PFAS↗

On the Structure-Property Relationships of Cation-Exchanged ZK-5 Zeolites for CO 2 Adsorption

The CO 2 adsorption properties of cation-exchanged Li-, Na-, K-, and Mg-ZK-5 zeolites were correlated to the molecular structures determined by Rietveld refinements of synchrotron powder X-ray diffraction patterns. Li-, K-, and Na-ZK-5 all exhibited high isosteric heats of adsorption (Qst) at low CO 2 coverage, with Na-ZK-5 having the highest Qst (ca. 49 kJ mol -1 ). Mg2+ was located at the center of the zeolite hexagonal prism with the cation inaccessible to CO 2 , leading to a much lower Qst (ca. 30 kJ mol-1) and lower overall uptake capacity. Multiple CO 2 adsorption sites were identified at a given CO 2 loading amount for all four cation-exchanged ZK-5 adsorbents. Site A at the flat eight-membered ring windows and site B/B* in the γ-cages were the primary adsorption sites in Li - and Na-ZK-5 zeolites. Relatively strong dual-cation adsorption sites contributed significantly to an enhanced electrostatic interaction for CO 2 in all ZK-5 samples. This interaction gives rise to a migration of Li + and Mg 2+ cations from their original locations at the center of the hexagonal prisms toward the α-cages, in which they interact more strongly with the adsorbed CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparison of residual stresses in Inconel 718 simple parts made by electron beam melting and direct laser metal sintering

Residual stress profiles were mapped using neutron diffraction in two simple prism builds of Inconel 718: one fabricated with electron beam melting and the other with direct laser sintering. Spatially indexed stress-free cubes were obtained by EDM sectioning equivalent prisms of similar shape. The (311) interplanar spacing examined for the EDM sectioned sample was compared to the interplanar spacings calculated to fulfill force and moment balance. We have shown that Applying force and moment balance is a necessary supplement to the measurements for the stress-free cubes with respect to accurate stress calculations in additively manufactured components. Furthermore, our work has shown that residual stresses in electron beam melting parts are much smaller than that of direct laser metal sintering parts.

36 MATERIALS SCIENCE↗

From atomistic models to machine learning: Predictive design of nanocarbons under extreme conditions

The formation of technologically valuable nanocarbon structures under extreme conditions, such as those produced during high-explosive detonations, remains poorly understood but holds significant potential for the development of controlled synthesis pathways. While detonation shockwaves provide the high-pressure, high-temperature environment required for nanodiamond formation, subsequent cooling and decompression dictate whether the diamond phase is preserved or transformed into other nanocarbon structures. Here, in this study, we employ GPU-accelerated reactive molecular dynamics (ReaxFF) simulations to investigate the graphitization and structural remodeling of detonation nanodiamond under nonlinear quench and pressure-release trajectories. We further investigate how the initial nanodiamond morphology; cuboctahedral, octahedral, or hexagonal prism influences the resulting transformation products. Evolution of nanostructure, allotrope (via simulated x-ray diffraction), carbon hybridization, and ring statistics are tracked during a two-stage quench from 5000 K to 60 GPa. Rapid cooling combined with slow decompression optimizes cubic diamond retention, whereas slow cooling with rapid pressure release promotes surface-to-core graphitization, producing concentric sp 2 -hybridized layers and hollowed inner shells. Octahedral nanodiamonds evolve into carbon nano-onions, initially forming bucky diamonds that progressively transform into fully sp 2 -hybridized structures, while hexagonal prisms preferentially form parallel-stacked graphite layers resembling carbon dots. Transient hexagonal diamond (lonsdaleite) emerges as an interfacial phase, suggesting potential reversibility in the shock-induced graphite-to-diamond transformation pathway transformation route. To extend predictive capabilities, we trained machine learning (ML) regressors on over 10 5 node-hours of molecular dynamics (MD) trajectories. A multilayer perceptron (MLP) model reliably predicts the number of graphitized layers from temperature–pressure trajectories with a coefficient of determination (R 2 ) exceeding 0.90. This high predictive fidelity enables efficient, high-throughput mapping of the synthesis parameter space for optimized graphitization outcomes. Collectively, morphological control combined with optimized quench–decompression conditions promote the selective synthesis of nanocarbon allotropes. This work establishes a data-driven framework for the rational, a priori design of carbon nanomaterials for applications in energy storage, sensing, and biomedicine.

Detonation nanodiamond remodeling↗

Shape effect on drying behavior of cement-based materials: Mechanisms and numerical analysis

The shape of the specimen or structure has a direct impact on the behavior of drying concrete. This effect is not taken into account in most of shrinkage models and codes. Only the current B4 model and its previous version B3 model incorporate a shape factor. The determination of this coefficient is based on the nonlinear moisture diffusion analysis, which can explain the shape effect on the shrinkage rate. However, the model integrates this coefficient in the ultimate shrinkage values as well. An experimental study has been performed to confirm and understand this behavior. The mass loss and drying shrinkage of cylinders showed higher rate and ultimate values than the prisms, for the same effective cross section thickness. To explain this result, the drying, the differential shrinkage, the internal stress and the damaged depth were determined for both shapes through numerical modeling. The main input data of the model were the measured mass loss and shrinkage. The calculated desorption isotherm curve of the cylinder was below that of the prism, which is consistent with its higher ultimate mass-loss. The determination of stress profiles indicates slower stress mitigation for the cylinder. The cylinder develops a larger relative damaged area, defined as the part of the specimen where cracking is likely to occur due to tensile stresses. The results actually show that differential shrinkage between the edge and the core is more pronounced for the cylinder and decreases with time.

36 MATERIALS SCIENCE↗

Efficacy of SCMs to mitigate ASR in systems with higher alkali contents assessed by pore solution method

This study demonstrates the efficacy of supplementary cementitious materials (SCMs) to mitigate alkali-silica reaction (ASR) even when used in conjunction with cement of higher alkali contents (up to 1% Na{sub 2}O{sub eq}). The expansion of concrete prisms was studied immersed in simulated pore solution in order to address the limitations of conventional ASR testing methods, accelerated mortar bar test (AMBT) and concrete prism test (CPT). Expansion results demonstrate that 25% fly ash and 50% slag are both sufficient to mitigate ASR even with cements with alkali content up to 1% Na{sub 2}O{sub eq} and that the pore solution method is a viable alternative ASR testing method. Massive amounts of ASR products (~20 μm thickness) were observed in concretes without SCMs consistent with high degree of expansion and extensive cracking. Small amounts of ASR products (≤5 μm thickness) were also observed in concrete with SCMs despite absence of significant expansion.

36 MATERIALS SCIENCE↗

Synthesis, structural characterization and Li{sup +} ion conductivity of a new vanado-molybdate phase, LiMg{sub 3}VMo{sub 2}O{sub 12}

A new vanado-molybdate LiMg{sub 3}VMo{sub 2}O{sub 12} has been synthesized, the crystal structure determined an ionic conductivity measured. The solid solution Li{sub 2-z}Mg{sub 2+z}V{sub z}Mo{sub 3-z}O{sub 12} was investigated and the structures of the z=0.5 and 1.0 compositions were refined by Rietveld analysis of powder X-ray (XRD) and powder neutron diffraction (ND) data. The structures were refined in the orthorhombic space group Pnma with a{approx}5.10, b{approx}10.4 and c{approx}17.6 A, and are isostructural with the previously reported double molybdates Li{sub 2}M{sub 2}(MoO{sub 4}){sub 3} (M=M{sup 2+}, z=0). The structures comprise of two unique (Li/Mg)O{sub 6} octahedra, (Li/Mg)O{sub 6} trigonal prisms and two unique (Mo/V)O{sub 4} tetrahedra. A well-defined 1:3 ratio of Li{sup +}:Mg{sup 2+} is observed in octahedral chains for LiMg{sub 3}VMo{sub 2}O{sub 12}. Li{sup +} preferentially occupies trigonal prisms and Mg{sup 2+} favours octahedral sheets. Excess V{sup 5+} adjacent to the octahedral sheets may indicate short-range order. Ionic conductivity measured by impedance spectroscopy (IS) and differential scanning calorimetry (DSC) measurements show the presence of a phase transition, at 500-600 {sup o}C, depending on x. A decrease in activation energy for Li{sup +} ion conductivity occurs at the phase transition and the high temperature structure is a good Li{sup +} ion conductor, with {sigma}=1x10{sup -3}-4x10{sup -2} S cm{sup -1} and E{sub a}=0.6 to 0.8 eV. - Graphical abstract: A new vanado-molybdate LiMg{sub 3}VMo{sub 2}O{sub 12} has been synthesized and the crystal structure determined. Ionic conductivity measurements show the presence of a phase transition, at 500-600 {sup o}C. A large decrease in activation energy for Li{sup +} ion conductivity occurs at the phase transition and the high temperature structure is a good Li{sup +} ion conductor. Display Omitted

36 MATERIALS SCIENCE↗

Ternary rare-earth ruthenium and iridium germanides RE{sub 3}M{sub 2}Ge{sub 3} (RE=Y, Gd–Tm, Lu; M=Ru, Ir)

Through arc-melting reactions of the elements and annealing at 800 °C, the ternary rare-earth germanides RE{sub 3}Ru{sub 2}Ge{sub 3} and RE{sub 3}Ir{sub 2}Ge{sub 3} have been prepared for most of the smaller RE components (RE=Y, Gd–Tm, Lu). In the iridium-containing reactions, the new phases RE{sub 2}IrGe{sub 2} were also generally formed as by-products. Powder X-ray diffraction revealed orthorhombic Hf{sub 3}Ni{sub 2}Si{sub 3}-type structures (space group Cmcm, Z=4) for RE{sub 3}M{sub 2}Ge{sub 3} (M=Ru, Ir) and monoclinic Sc{sub 2}CoSi{sub 2}-type structures (space group C2/m, Z=4) for RE{sub 2}IrGe{sub 2}. Full crystal structures were determined by single-crystal X-ray diffraction for all members of RE{sub 3}Ru{sub 2}Ge{sub 3} (a=4.2477(6) Å, b=10.7672(16) Å, c=13.894(2) Å for RE=Y; a=4.2610(3)–4.2045(8) Å, b=10.9103(8)–10.561(2) Å, c=14.0263(10)–13.639(3) Å in the progression of RE from Gd to Lu) and for Tb{sub 3}Ir{sub 2}Ge{sub 3} (a=4.2937(3) Å, b=10.4868(7) Å, c=14.2373(10) Å). Both structures can be described in terms of CrB- and ThCr{sub 2}Si{sub 2}-type slabs built from Ge-centred trigonal prisms. However, band structure calculations on Y{sub 3}Ru{sub 2}Ge{sub 3} support an alternative description for RE{sub 3}M{sub 2}Ge{sub 3} based on [M{sub 2}Ge{sub 3}] layers built from linked MGe{sub 4} tetrahedra, which emphasizes the strong M–Ge covalent bonds present. The temperature dependence of the electrical resistivity of RE{sub 3}Ru{sub 2}Ge{sub 3} generally indicates metallic behaviour but with low-temperature transitions visible for some members (RE=Gd, Tb, Dy) that are probably associated with magnetic ordering of the RE atoms. Anomalously, Y{sub 3}Ru{sub 2}Ge{sub 3} exhibits semiconductor-like behaviour of uncertain origin. Magnetic measurements on Dy{sub 3}Ru{sub 2}Ge{sub 3} reveal antiferromagnetic ordering at 3 K and several unusual field-dependent transitions suggestive of complex spin reorientation processes. - Graphical abstract: RE{sub 3}M{sub 2}Ge{sub 3} (M=Ru, Ir) adopts the Hf{sub 3}Ni{sub 2}Si{sub 3}-type structure containing slabs built up from Ge-centred trigonal prisms. - Highlights: • Crystal structures of RE{sub 3}Ru{sub 2}Ge{sub 3} (RE=Y, Gd–Tm, Lu) and Tb{sub 3}Ir{sub 2}Ge{sub 3} were determined. • Strong M–Ge covalent bonds were confirmed by band structure calculations. • Most RE{sub 3}Ru{sub 2}Ge{sub 3} members except Y{sub 3}Ru{sub 2}Ge{sub 3} exhibit metallic behaviour. • Dy{sub 3}Ru{sub 2}Ge{sub 3} displays unusual field-dependent magnetic transitions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stabilization of the Ti{sub 3}Co{sub 5}B{sub 2}-type structure for Ti{sub 3−x}Si{sub x}Ru{sub 5}B{sub 2} through Si–Ti substitution

We report a route for designing and synthesizing Ti{sub 3}Co{sub 5}B{sub 2}-type compounds in the Ti–Ru–B system by using chemical substitution of Si for Ti to decrease the d-electron-based antibonding interactions that it is argued would otherwise drive an instability in this structure for unsubstituted Ti{sub 3}Ru{sub 5}B{sub 2}. Ti{sub 3−x}Si{sub x}Ru{sub 5}B{sub 2} with x=0.75, 1.00 and 1.25 nominal compositions crystalizes in the Ti{sub 3}Co{sub 5}B{sub 2} structure type using arc melting methods, whereas at lower doping levels (x=0.0, 0.25 and 0.50) the more complex Zn{sub 11}Rh{sub 18}B{sub 8}-type structure is stable. Electronic structure calculations show that in hypothetical, unsubstituted Ti{sub 3}Ru{sub 5}B{sub 2} with the Ti{sub 3}Co{sub 5}B{sub 2}-type structure, the antibonding interactions are strong around the Fermi level between the Ti and Ru in the structure that form tetragonal prisms. We propose that weakening these strong interactions through the partial substitution of isovalent Si for Ti leads to the observed stability of the Ti{sub 3}Co{sub 5}B{sub 2}-type structure for Ti{sub 3−x}Si{sub x}Ru{sub 5}B{sub 2} for x≈1. - Graphical abstract: We present the designing and synthesizing of Ti{sub 3}Co{sub 5}B{sub 2}-type compounds in the Ti–Ru–B system by using chemical substitution of Si for Ti to decrease the d-electron-based antibonding interactions that would otherwise drive an instability in this structure for unsubstituted Ti{sub 3}Ru{sub 5}B{sub 2}. Electronic structure calculations show that in hypothetical, unsubstituted Ti{sub 3}Ru{sub 5}B{sub 2} with the Ti{sub 3}Co{sub 5}B{sub 2}-type structure, the antibonding interactions are strong around the Fermi level between the Ti and Ru in the structure that form tetragonal prisms. We propose that weakening these strong interactions through the partial substitution of isovalent Si for Ti leads to the observed stability of the Ti{sub 3}Co{sub 5}B{sub 2}-type structure for Ti{sub 3−x}Si{sub x}Ru{sub 5}B{sub 2} for x≈1. - Highlights: • New quaternary phase Ti{sub 3−x}Si{sub x}Ru{sub 5}B{sub 2} in Ti{sub 3}Co{sub 5}B{sub 2}-type structure is reported. • Chemical substitution of isovalent Si for Ti is used to stabilize the phase. • Decreasing the d-electron-based antibonding interactions is proved by calculation. • Physical properties of Ti{sub 3−x}Si{sub x}Ru{sub 5}B{sub 2} are presented down to 0.4 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the tungsten single crystal coatings achieved by chemical vapor transportation deposition

The tungsten single crystal has many excellent properties, namely a high melting point, high anti-creeping strength. Chemical vapor transportation deposition (CVTD) is a possible approach to achieve large-sized W single crystals for high-temperature application such as the cathode of a thermionic energy converter. In this work, CVTD W coatings were deposited on the monocrystalline molybdenum substrate (a tube with < 111 > axial crystalline orientation) using WCl{sub 6} as a transport medium. The microstructures of the coatings were investigated by a scanning electron microscope (SEM) and electron backscatter diffraction (EBSD). The as-deposited coatings are hexagonal prisms—rough surfaces perpendicular to < 110 > with alternating hill-like bulges and pits at the side edges of the prisms, and flat surfaces perpendicular to < 112 > with arc-shaped terraces at the side faces. This can be explained by two-dimensional nucleation -mediated lateral growth model. Some parts of the coatings contain hillocks of an exotic morphology (noted as “abnormal growth”). The authors hypothesize that the abnormal growth is likely caused by the defects of the Mo substrate, which facilitate W nucleation sites, cause orientation difference, and may even form boundaries in the coatings. A dislocation density of 10{sup 6} to 10{sup 7} (counts/cm{sup 2}) was revealed by an etch-pit method and synchrotron X-ray diffraction. As the depositing temperature rises, the dislocation density decreases, and no sub-boundaries are found on samples deposited over 1300 °C, as a result of atom diffusion and dislocation climbing. - Highlights: •The varied growth rate causes the different morphologies of different planes. •The W coating is a single crystal when only single hillocks appear. •The (110) plane tends to have the lowest dislocation density. •The dislocation density tends to decrease as the temperature increases.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis and electrical properties of NaNbO{sub 3}

Graphical abstract: Display Omitted Highlights: ► Crystalline rhombohedral sodium niobate (r-NaNbO{sub 3}) were synthesized. ► Conductivity goes from 5.5 × 10{sup −6} Ω{sup −1} cm{sup −1} at 280 °C to 7.61 × 10{sup −4} Ω{sup −1} cm{sup −1} at 780 °C. ► Activation energies are in the order of 0.893, 0.507, 0.819 and 0.105 eV. -- Abstract: Triangular prism-like of crystalline rhombohedral sodium niobate (r-NaNbO{sub 3}) were prepared from Nb{sub 2}O{sub 5} in the presence of NaOH via a hydrothermal method at 180 °C for 6 h. Techniques X-ray diffraction, scanning electron microscopy, Fourier transform infrared, Raman and impedance spectroscopy have been used to characterize the structure, morphology, composition and electrical properties of the material. Electrical conductivity measurements showed that the as synthesized r-NaNbO{sub 3} triangular prism has a conductivity value which goes from 5.5 × 10{sup −6} Ω{sup −1} cm{sup −1} at 280 °C to 7.61 × 10{sup −4} Ω{sup −1} cm{sup −1} at 780 °C. The Arrhenius diagram is not linear; it presents four regions of conductivity. The corresponding activation energies are, respectively, in the order of 0.893, 0.507, 0.819 and 0.105 eV, deduced from the Arrhenius relation.

36 MATERIALS SCIENCE↗

Analysis of alternative climate datasets and evapotranspiration methods for the Upper Mississippi River Basin using SWAT within HAWQS

This study reports the application of Soil andWater Assessment Tool (SWAT) within the Hydrologic andWater Quality System(HAWQS) on-line platform, for the UpperMississippi River Basin (UMRB). TheUMRB is an important ecosystem located in the north central U.S. that is experiencing a range of ecological stresses. Specifically, testing of SWAT was performed for: (1) Hargreaves (HG) and Penman-Monteith (PM) PET methods, and (2) Livneh, National Climatic Data Center (NCDC) and Parameter-elevation Regressions on Independent Slopes Model (PRISM) climate datasets. The Livneh-PM combination resulted in the highest average annual water yield of 380.6 mm versus the lowest estimated water yield of 193.9 mm for the Livneh-HG combination, in response to 23-year uncalibrated simulations. Higher annual ET and PET values were predicted with HG method versus the PM method for all three weather datasets in response to the uncalibrated simulations, due primarily to higher HG-based estimates during the growing season. Based on these results, it was found that the HG method is the preferred PET option for the UMRB. Initial calibration of SWAT was performed using the Livneh data and HGmethod for threeMississippi Rivermain stem gauge sites, which was followed by spatial validation at 10 other gauge sites located within the UMRB streamnetwork. Overall satisfactory results were found for the calibration and validation gauge sites, with the majority of R2 values ranging between 0.61 and 0.82, Nash- Sutcliffe modeling efficiency (NSE) values ranging between 0.50 and 0.79, and Kling-Gupta efficiency (KGE) values ranging between 0.61 and 0.84. The results of an additional experimental suite of six scenarios,which represented different combinations of climate data sets and calibrated parameters, revealed that suggested statistical criteria were again satisfied by the different scenario combinations. Overall, the PRISM data exhibited the strongest reliability for the UMRB.

54 ENVIRONMENTAL SCIENCES↗

Experimental demonstration and performance evaluation of a complex fenestration system for daylighting and thermal harvesting

Two significant design strategies for mitigating building energy consumption are daylight redirection and solar energy harvesting. Effective daylighting implementation enhances the amount of useful natural light within a space and offsets the need for electric lighting. Solar energy harvesting systems can mitigate energy costs from mechanical systems by managing incoming thermal loads or capturing solar energy that can be used to supplement thermal systems in the building. While there are many available façade-based technologies that can perform daylighting or solar thermal energy harvesting, there remains a limitation in available systems that can perform both of them simultaneously. This paper, describes the design and experimental demonstration of a Liquid Filled Prismatic Louver (LFPL) system, which combines both energy-saving strategies. The LFPL system was installed in a south-facing room in New York City and evaluated for indoor daylight penetration and potential for thermal energy harvesting. Daylight redirection is achieved through the prismatic louver geometry and proper orientation, whereas thermal energy harvesting is achieved through IR absorption from the liquid (e.g., water) within the prisms. Daylighting performance was evaluated by illuminance measurements at key locations within the space, whereas thermal harvesting performance was evaluated through temperature measurements and thermal imaging analysis. We show that the LFPL system, with all prismatic elements oriented at the same angle, achieve a 2-fold and 8-fold enhancement in daylight redirection to the ceiling, for prism orientations of 10° and 20°, respectively. We also demonstrate the system’s capability to adjust to specific lighting needs, within the space, through the dynamic individual orientation of prismatic elements; thus, achieving a concentrated ceiling illuminance enhancement of ~100 times and ~200 times at 2.5 and 4.3 m away from the window sill, providing workplane illuminance enhancement of 6 and 2 times more than in the case of the control room with regular windows. Furthermore, we illustrate a reduction of potential heating loads at locations close to the window from the combination of infrared absorption in the water volume and the redirection of the incoming solar radiation, leading to a reduction of the workplane temperature by an average of 7–10 °C.

14 SOLAR ENERGY↗

Venturing into Unexplored Phase Space: Synthesis, Structure, and Properties of MgCo 3 B 2 Featuring a Rumpled Kagomé Network

MgCo 3 B 2 , a novel ternary boride in a previously unexplored phase space, was synthesized using the hydride route. In situ powder X-ray diffraction and DFT calculations aided in the discovery of this compound, whose structure was then determined by single-crystal X-ray diffraction. Like the closely related CeCo 3 B 2 , MgCo 3 B 2 crystallizes in centrosymmetric space group P6/mmm (a = 4.883(2) Å, c = 2.926(2) Å at 210 K, Z = 1). Unlike CeCo 3 B 2 , however, it adopts a disordered structure that features a rumpled Kagomé network of Co atoms, and Mg atoms fill the channels of a Co–B framework. Although the structural disorder leads to motifs that are similar to those observed in MgNi 3 B 2 and other related ternary borides, no evidence of an ordered superstructure was found by single-crystal X-ray diffraction or high-resolution powder X-ray diffraction. In the case of CeCo 3 B 2 , boron atoms occupy the center of regular Co 6 trigonal prisms; in MgCo 3 B 2 , boron atoms are shifted from the center of the prism to form B–B dimers with roughly the same length as those found in MgNi 3 B 2 . Magnetic susceptibility data exhibit an unusual temperature dependence that cannot be convincingly modeled by the modified Curie–Weiss equation, consistent with DFT calculations predicting a nonmagnetic ground state. Intrinsic susceptibility at 300 K is 1.42 × 10 –3 emu/mol Oe, which is comparable to that of paramagnetic YCo 3 B 2 and CeCo 3 B 2 with a similar structure and composition. Here, this study showcases the efficacy of combining several methodologies to discover new solids in unexplored phase spaces. This approach includes in situ PXRD data to monitor reactions of precursors upon heating, a diffusion-enhanced synthesis method, and DFT assessment of compound stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

d -Electron Heavy Fermion Behavior in a Near-Room-Temperature Polar Metallic Ferrimagnet: A Case of Mn 5 SiC

Polycrystalline Mn 5 SiC was synthesized by using a high-temperature solid-state method. Mn 5 SiC adopts a polar space group (Cmc2 1 ) with six crystallographic Mn sites confirmed by X-ray and neutron diffraction, transmission electron microscopy, and second harmonic generation experiments. The complex crystal structure features edge-sharing trigonal prisms and icosahedra, as well as face/edge-sharing pentagonal prisms. Magnetic measurements indicate ferrimagnetic ordering with a transition temperature of 284 K. The ferrimagnetic structure (magnetic space group Cm’c’2 1 ) was further identified by powder neutron diffraction, where collinear Mn spins align along the crystallographic c-axis. The refined magnetic moment for each crystallographic Mn site at 4 K is 1.8(2), −2.42(9), −1.72(8), 0.51(6), 0.50(4), and 1.7(2) μ B . Density functional theory calculations confirm both the metallic behavior and the ferrimagnetic structure observed experimentally and further provide insight into the observed Mn moment dependence across crystallographic sites. The resistivity and specific heat measurements and density functional theory calculations reveal a substantially large Kadowaki–Woods ratio of 5 × 10 –5 μΩ·cm/(mJ/mol) 2 and a many-body renormalization factor of 5.5, indicating the unusual heavy Fermion behavior in such an itinerant magnetic metal.

Messegee, Zachary T. [George Mason University, Fai↗

Revealing Surface Waters on an Antifreeze Protein by Fusion Protein Crystallography Combined with Molecular Dynamic Simulations

Antifreeze proteins (AFPs) adsorb to ice through an extensive, flat, relatively hydrophobic surface. It has been suggested that this ice-binding site (IBS) organizes surface waters into an ice-like clathrate arrangement that matches and fuses to the quasi-liquid layer on the ice surface. On cooling, these waters join the ice lattice and freeze the AFP to its ligand. Evidence for the generality of this binding mechanism is limited because AFPs tend to crystallize with their IBS as a preferred protein–protein contact surface, which displaces some bound waters. Type III AFP is a 7 kDa globular protein with an IBS made up two adjacent surfaces. In the crystal structure of the most active isoform (QAE1), the part of the IBS that docks to the primary prism plane of ice is partially exposed to solvent and has clathrate waters present that match this plane of ice. The adjacent IBS, which matches the pyramidal plane of ice, is involved in protein–protein crystal contacts with few surface waters. Here we have changed the protein–protein contacts in the ice-binding region by crystallizing a fusion of QAE1 to maltose-binding protein. In this 1.9 Å structure, the IBS that fits the pyramidal plane of ice is exposed to solvent. By combining crystallography data with MD simulations, the surface waters on both sides of the IBS were revealed and match well with the target ice planes. Here, the waters on the pyramidal plane IBS were loosely constrained, which might explain why other isoforms of type III AFP that lack the prism plane IBS are less active than QAE1. The AFP fusion crystallization method can potentially be used to force the exposure to solvent of the IBS on other AFPs to reveal the locations of key surface waters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗