Search NASA⌕ Search

SEARCH · Search NASA

Results for “Particle flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Urban wash-off of tire wear particles

Tire wear particles (TWPs) are an important class of microplastics due to their toxicity and abundance. Because most TWPs are generated on impervious road surfaces, urban wash-off is the critical first phase of waterborne transport from their zone of production to stormwater drainage. However, little is known about the driving factors behind their mobilization. In this study, we use a rainfall simulator to investigate how surface roughness, rainfall intensity, and surface slope affect wash-off behaviors of TWPs. We also analyze how the size and shape of mobilized TWPs change over the course of simulated storm events. We found that low surface roughness, high rainfall intensity (most significant factor), and low slope result in the most rapid conveyance of TWP load. On average, large particles (>1000 µm) travelled faster than small particles (<125 µm). Particle shape explained a very small amount of variance in TWP wash-off velocity but was found to be more important under higher surface roughness conditions. In addition to wash-off velocity, we found similar conditions controlled the percent mobilization of TWPs. Low surface roughness and high rainfall intensity resulting in higher TWP wash-off rates is consistent with mineral sediment wash-off behavior. Conversely, low surface slope and large particle size leading to faster conveyance is directly opposed to mineral sediment wash-off. Our findings suggest drag-dominated flow and that sufficient runoff depth is the most important parameter governing TWP wash-off. These findings are important first steps to understanding wash-off behaviors of TWPs and informing future modeling efforts and mitigation strategies.

13 HYDRO ENERGY↗
DOE OSTI2025

Numerical analysis of air dehumidification through electrospray-enhanced vortical flow cyclone separator

The dehumidification of air is a highly energy-intensive process, typically requiring vapor compression systems to cool the air significantly below its dew point temperature. Here, this study numerically investigates air dehumidification achieved by electrostatic and dielectrophoresis forces in a converging duct and centrifugal principles in cyclone separators. An electrospray was employed to energize water droplets, which then captured water vapor via dielectrophoresis. A novelty of the present study is the inclusion of a cyclone separator positioned downstream of the electrospray. This combination increased the dehumidification efficiency and controlled the flow of the condensate. By integrating electrospray technology and applying an electric field, this study examines the impact of particle separation efficiency, pressure drops, and cyclone performance on air dehumidification. The control parameters for air dehumidification were investigated. Three cyclones were modelled for airflow rates of 5 cubic feet per minute [cfm] (0.0024 m 3 /s), 38 cfm (0.0179 m 3 /s), and 200 cfm (0.094 m 3 /s). The results indicated air dehumidification was up to 5.7 % under environmental conditions, similar to those used to validate the CFD model. The degree of air dehumidification was primarily influenced by the electric charge acquired by the water droplets, their flight trajectory, and the vorticity intensity within the cyclone. Air dehumidification could increase by up to 13 % by increasing the number of droplets injected into the air stream, the flight time, and the electrical charge. The breakdown electric field strength threshold near the electrospray was a limiting factor for further enhancing dehumidification performance. This study examines the optimization of an electro-assisted dehumidification system that includes cyclone-based droplet separation through numerical analysis. The results provide insights into the design of energy-efficient air treatment technologies.

42 ENGINEERING↗
DOE OSTI2025

Autonomous Nanoparticle Synthesis Guided by In Situ Multiscale Structural Characterization

Autonomous synthesis platforms promise rapid exploration of vast parameter spaces; yet, integrating in situ structural characterization in closed-loop synthesis optimization remains challenging. We demonstrate a realization of such a closed-loop platform coupled with a droplet-flow microreactor, in situ X-ray scattering methods (SAXS/WAXS), and Gaussian process optimization to synthesize citrate-reduced Au nanoparticles with targeted characteristics. The system efficiently explored ∼19,000 synthesis recipes through 365 experiments, achieving precise control over size (4–60 nm) and polydispersity (σ < 0.11) across large citrate/gold ratios, exceeding traditional synthesis boundaries (1–10). Beyond confirming classical Turkevich–Frens trends, partial-dependence analysis revealed strong nonlinear coupling among precursor, citrate, and pH effects. Combining quantitative SAXS/WAXS analysis with electron microscopy characterization, we uncovered that crystallite size (d c ) and particle size (d) follow d c = 0.18d + β, where synthesis chemistry controls the intercept β while maintaining a universal slope. This parallel-band structure enables independent tuning of crystallite domain size at fixed particle diameter through a combination of chloride, gold precursor, citrate, and pH contributions (cross-validated Spearman ρ = 0.7 ± 0.1). High-resolution electron microscopy shows multiple lattice-fringe orientations within single particles, directly confirming polycrystalline domains and the ability to tune d c at the fixed d. The platform’s validation includes indistinguishable static versus flowing measurements, stable droplet transport at 100 °C, and <5% run-to-run variation, establishing a robust framework for mapping and controlling multiscale nanoparticle structure across expansive chemical spaces. In conclusion, the developed closed-loop platform can be applied to a borad range of nanosyntheis processes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Effect of nozzle translation on a bounded vortex flow

A bounded vortex flow is generated by a nozzle that combines azimuthally tilted downward jets in a circular array and a central suction port. When the nozzle is directed toward a bottom surface (called the impingement surface), the flow develops a strong intake vortex spanning from the impingement surface to the suction port, which acts to generate strong shear stress on the impingement surface. This strong shear stress can aid in removing particles attached to the impingement surface or in enhancement of heat or mass transfer, where in typical applications, the nozzle would be translated along the impingement surface. This paper reports on a computational study of the effect of nozzle translation on the bounded vortex flow field. The nozzle translation induces a bending of the bounded vortex in the downstream flow direction, which becomes larger with increase in the nozzle translation speed. We identify an interesting oscillatory phenomenon by which the bounded vortex can resist the bending induced by the translational flow and rotate about a mean position downstream of the suction port. At sufficiently high translation speeds, the oscillatory process can no longer resist the downwash effect from nozzle translation and the vortex eventually detaches from the impingement surface, limiting the effectiveness of this flow device.

42 ENGINEERING↗
DOE OSTI2026

Proton-rich Production of Lanthanides: The vi Process

The astrophysical origin of the lanthanides is an open question in nuclear astrophysics. Besides the widely studied s, i, and r processes in moderately to strongly neutron-rich environments, an intriguing alternative site for lanthanide production could in fact be robustly proton-rich matter outflows from core-collapse supernovae under specific conditions—in particular, high-entropy winds with enhanced neutrino luminosity and fast dynamical timescales. In this environment, excess protons present after charged-particle reactions have ceased can continue to be converted to neutrons by (anti)neutrino interactions, producing a neutron-capture reaction flow up to A ∼ 200. This scenario, christened the νi process in a recent paper, has previously been discussed as a possibility. Here, we examine the prospects for the νi process through the lenses of stellar abundance patterns, bolometric light curves, and galactic chemical evolution models, with a particular focus on hypernovae as candidate sites. We identify specific lanthanide signatures for which the νi process can provide a credible supplement to the r/i processes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Evidence for Similar Collectivity of High Transverse-Momentum Particles in 𝑝-Pb and Pb-Pb Collisions

Charged hadron elliptic anisotropies (𝑣 2 ) are presented over a wide transverse momentum (𝑝 T ) range for proton-lead (𝑝 ⁢Pb) and lead-lead (PbPb) collisions at nucleon-nucleon center-of-mass energies of 8.16 and 5.02 TeV, respectively. The data were recorded by the CMS experiment and correspond to integrated luminosities of 186 and 0.607 nb −1 for the 𝑝⁢Pb and PbPb systems, respectively. A four-particle cumulant analysis is performed using subevents separated in pseudorapidity to effectively suppress noncollective effects. At high 𝑝 T (𝑝 T > 8 GeV), significant positive 𝑣 2 values that are similar between 𝑝 ⁢Pb and PbPb collisions at comparable charged particle multiplicities are observed. This observation suggests a common origin for the multiparticle collectivity for high-𝑝 T particles in the two systems.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Velocity-space Origins of the Pressure–Strain Interaction in Multipopulation Distributions and Its Application to Magnetic Reconnection

A forefront research question is how energy evolves in weakly collisional plasmas for which departures from local thermodynamic equilibrium (LTE) are significant. The standard approach is studying the terms in the non-LTE energy evolution equation derived by taking the second moment of the Boltzmann equation, but the resultant fluid metrics do not retain information about which particles at which velocities drive energy evolution. A widely studied channel for internal energy density evolution is the pressure–strain interaction. Here, we employ the kinetic pressure–strain, a phase-space diagnostic whose velocity-space integral recovers the pressure–strain interaction to disambiguate the contributions to the pressure–strain interaction from disparate particle populations in composite phase-space densities. We develop phase-space analogs of the pressure–strain interaction decompositions to provide the phase-space origins of normal versus sheared flow. We introduce the “kinetic strain-rate” tensor, the phase-space analog of the strain-rate tensor, which we argue is needed to interpret the phase-space origins of the pressure–strain interaction. To demonstrate the utility of these quantities, we investigate them for composite electron distributions near the electron diffusion region in two-dimensional particle-in-cell simulations of antiparallel symmetric magnetic reconnection. We find that the phase-space-based diagnostics isolate the roles of distinct populations. These results contribute to a growing body of work providing new methods for quantifying phase-space energy evolution for a broad array of processes, from magnetic reconnection to collisionless shocks and turbulence, opening new pathways for answering longstanding problems of particle energization in weakly collisional plasmas.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Design of a SiC-Si moving packed-bed particle-to-sCO 2 heat exchanger for high temperature concentrating solar power applications

Particle-based concentrating solar power systems integrated with sCO 2 power cycles offer high thermal efficiencies but require durable heat exchangers to transfer heat from high-temperature particles to the sCO 2 working fluid. Here, this study presents the design and optimization of a silicon carbide-silicon moving packed-bed heat exchanger for fabrication via binder jetting additive manufacturing. The heat exchanger was designed to withstand a 20 MPa sCO 2 pressure and operate at particle inlet temperatures up to 750 °C. The final design features 152 sCO 2 channels distributed across 19 plates, with elliptical corners and a minimum wall thickness of 3 mm. Flow restrictors at the sCO 2 channel inlets significantly improved flow uniformity, reducing thermal stresses and achieving a structural reliability of 99 % under representative operating conditions. The heat exchanger delivers a thermal duty of 9 kW and a volumetric power density of approximately 1 MW/m 3 in the channel region. Sensitivity studies confirmed the heat exchanger’s robustness under varying operating conditions, demonstrating its viability as a high-performance alternative to metallic heat exchangers for particle-based high-temperature concentrating solar power applications.

Barua, Bipul [Argonne National Laboratory (ANL), A↗
DOE OSTI2025

System size and energy dependence of the mean transverse momentum fluctuations at the LHC

Event-by-event fluctuations of the event-wise mean transverse momentum, $\langle$p T $\rangle$, of charged particles produced in proton–proton (pp) collisions at $\sqrt{s}$ = 5.02 TeV, Xe–Xe collisions at $\sqrt{s_{NN}}$ = 5.44 TeV, and Pb–Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV are studied using the ALICE detector based on the integral correlator $\langle$$\langle$Δp T Δp T $\rangle$$\rangle$. The correlator strength is found to decrease monotonically with increasing produced charged-particle multiplicity measured at midrapidity in all three systems. In Xe–Xe and Pb–Pb collisions, the multiplicity dependence of the correlator deviates significantly from a simple power-law scaling as well as from the predictions of the HIJING and AMPT models. The observed deviation from power-law scaling is expected from transverse radial flow in semicentral to central Xe–Xe and Pb–Pb collisions. In pp collisions, the correlation strength is also studied by classifying the events based on the transverse spherocity, S 0 , of the particle production at midrapidity, used as a proxy for the presence of a pronounced back-to-back jet topology. Low-spherocity (jetty) events feature a larger correlation strength than those with high spherocity (isotropic). The strength and multiplicity dependence of jetty and isotropic events are well reproduced by calculations with the PYTHIA 8 and EPOS LHC models.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Bounding irrelevant operators in the 3d Gross-Neveu-Yukawa CFTs

We perform a numerical bootstrap study of scalar operators in the critical 3d Gross-Neveu-Yukawa models, a family of conformal field theories containing N Majorana fermions in the fundamental representation of an O(N) global symmetry. We compute rigorous bounds on the scaling dimensions of the next-to-lowest parity-even and parity-odd singlet scalars at N = 2, 4, and 8. All of these dimensions have lower bounds greater than 3, implying that there are only two relevant singlet scalars and placing constraints on the RG flow structure of these theories.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Overview of the first Wendelstein 7-X long pulse campaign with fully water-cooled plasma facing components

After a long device enhancement phase, scientific operation resumed in 2022. The main new device components are the water cooling of all plasma facing components and the new water-cooled high heat flux divertor units. Water cooling allowed for the first long-pulse operation campaign. A maximum discharge length of 8 min was achieved with a total heating energy of 1.3 GJ. Safe divertor operation was demonstrated in attached and detached mode. Stable detachment is readily achieved in some magnetic configurations but requires impurity seeding in configurations with small magnetic pitch angle within the edge islands. Progress was made in the characterization of transport mechanisms across edge magnetic islands: Measurement of the potential distribution and flow pattern reveals that the islands are associated with a strong poloidal drift, which leads to rapid convection of energy and particles from the last closed flux surface into the scrape-off layer. Using the upgraded plasma heating systems, advanced heating scenarios were developed, which provide improved energy confinement comparable to the scenario, in which the record triple product for stellarators was achieved in the previous operation campaign. However, a magnetic configuration-dependent critical heating power limit of the electron cyclotron resonance heating was observed. Exceeding the respective power limit leads to a degradation of the confinement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Impact of QCD energy evolution on observables in heavy-ion collisions

Here, we study how the inclusion of energy dependence as dictated by quantum chromodynamic (QCD) small-x evolution equations affects key observables in ultra-relativistic heavy-ion collisions. Specifically, we incorporate JIMWLK evolution into the IP-Glasma framework, which serves as the initial condition for a simulation pipeline that includes viscous relativistic hydrodynamics and a hadronic afterburner. This approach enables a consistent modeling of highly energetic nuclei across varying Bjorken-x values, which are relevant for different collision energies and rapidity regions. In comparison to the standard IP-Glasma setup without small-x evolution, we observe pronounced changes in particle multiplicities and spectral distributions, especially in smaller systems and at the highest available energies. We further explore effects on anisotropic flow observables and correlations between mean transverse momentum and elliptic flow. Our findings underscore the critical role of nonlinear QCD evolution in accurately modeling the early stages of heavy-ion collisions, as well as its implications for extracting transport properties of the quark-gluon plasma.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Excerpt from Oxygen Monitor Clean Testing Report Performed in 2010

The Rosemount X-STREAM Series X2GP is a paramagnetic oxygen analyzer with a 0-25% oxygen measurement range. It claims a drift less than 2% of span (0.10% volume oxygen) per week, and a response time of less than 5 seconds (for the analyzer to report 90% of a step change). Our test equipment was set-up such that the same gas was running through each oxygen analyzer at the same time. This allowed Calibration Error, Calibration Drift, and Loss of Power Testing to be run on all monitors at the same time, eliminating any variability between the analyzers from tolerances in the gas cylinder, ambient temperature, ambient pressure, test duration, etc. An APTech pressure regulator was placed on the gas cylinder manifold and a 23 psia Paroscientific pressure transducer measured the regulator’s outlet pressure. This did not give the inlet pressure on any one analyzer but outlet pressure from the manifold before the stream was split. The APTech pressure regulator was used to keep operating conditions consistent. A DWYER rotameter was installed on each oxygen monitor’s outlet piping. With the exception of Variation of Flow Rate Testing, the rotameter was left fully open for all testing. The flow rate through each oxygen monitor was controlled by a Swagelok needle valve that was installed on each analyzer’s inlet piping. Additionally, a filter was installed in the each monitor’s inlet piping to keep particles from the measurement cells and a Swagelok ball valve was installed on each monitor’s outlet piping to isolate each monitor between tests. No pumps were installed. Each of the cylinders used was at a pressure greater than ambient room barometric pressure. This pressure differential was used to move gas through the testing equipment. The flow rate through each analyzer was controlled by the Swagelok needle valve installed on each analyzer’s inlet piping. Finally, for all tests, a Paroscientific Digiquartz Barometer was used to measure ambient room barometric pressure and a Fluke Thermo-hygrometer was used to measure ambient room temperature.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

Studies of localized mix and asymmetry caused by the stalk in inertial fusion experiments at OMEGA

In an inertially confined fusion experiment, a capsule of fusion fuel is compressed to high temperatures and densities using lasers, creating a hot plasma in which thermonuclear fusion reactions take place. To achieve efficient conversion of laser energy to fuel heating, the implosion must be as spherically symmetric as possible. One common source of asymmetry that degrades performance is the stalk and glue spot that hold the capsule in place before the experiment. The exact nature and magnitude of this perturbation had not been previously quantified. In this work, inertially confined fusion experiments were executed with an additional stalk on the capsule to measure and quantify the effect of the stalk and glue spot on the symmetry and performance. It is found that the stalk drives low-mode asymmetry by shadowing the laser drive on the part of the shell near the glue spot, enhancing the hot-spot velocity toward the stalk by 40–80 km/s and elongating the hot-spot along the stalk axis. It is also found that localized mix due to the additional stalk has a negligible effect on implosion performance. Two-dimensional radiation-hydrodynamic simulations using the xRAGE code reproduce the direction of the experimentally observed change to hot-spot velocity and implosion performance metrics, but not the observed elongation, suggesting that this feature results from an interaction between stalk perturbations and other preexisting asymmetry seeds, such as laser drive asymmetry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

An ignition criterion for inertial fusion boosted by microturbulence

Turbulence on fine spatial scales enhances fusion reactivity, enabling ignition at lower temperature. A modified Lawson-like ignition criterion is derived for inertially confined plasmas harboring turbulent kinetic energy. For some turbulent energy spectra, hot spots ignite at lower energy density and smaller volume. While detrimental mixing effects typically accompany turbulence and obscure these advantages, targets might be engineered to drive flow in regions where it is beneficial. The optimal length scale for this driving is identified, typically lying in the micrometer range.

Alpha particles↗
DOE OSTI2025

Global heliospheric termination shock strength in the solar–interstellar interaction

A heliospheric termination shock (HTS) surrounds our Solar System at approximately 100 astronomical units from the Sun, where the expanding solar wind (SW) is compressed and heated before encountering the interstellar medium. HTS-accelerated particles govern the pressure balance with the interstellar medium, but little is known about the global properties of the HTS beyond in situ measurements from Voyager in only two directions of the sky. Here we fill this gap by extracting the HTS strength using particle-in-cell, test particle and magnetohydrodynamic simulations, constrained by Interstellar Boundary Explorer observations of energetic neutral atoms produced from HTS-accelerated particles. Our results reveal there is a higher compression near the poles during solar minimum compared with solar maximum due to the higher Mach number flow. North–south asymmetries arise from the disparate evolution of the polar coronal holes, while minimum compression near the flanks is probably due to SW slowing from mass loading over a greater distance to the HTS. The results imply a strong connection between the HTS strength and the SW and interstellar medium dynamics.

Astrophysical plasmas↗
DOE OSTI2025

Charged-hadron and identified-hadron (𝐾$^{0}_{𝑆}$, Λ, $Ξ$ − ) yield measurements in photonuclear Pb + Pb and 𝑝 + Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV with ATLAS

This paper presents the measurement of charged-hadron and identified-hadron (𝐾$^{0}_{𝑆}$, Λ, $Ξ$ − ) yields in photonuclear collisions using 1.7nb −1 of $\sqrt{s_{NN}}$ = 5.02 TeV Pb + Pb data collected in 2018 with the ATLAS detector at the Large Hadron Collider. Candidate photonuclear events are selected using a combination of tracking and calorimeter information, including the zero-degree calorimeter. The yields as a function of transverse momentum and rapidity are measured in these photonuclear collisions as a function of charged-particle multiplicity. These photonuclear results are compared with 0.1 nb −1 of $\sqrt{s_{NN}}$ = 5.02 TeV p + Pb data collected in 2016 by ATLAS using similar charged-particle multiplicity selections. These photonuclear measurements shed light on potential quark-gluon plasma formation in photonuclear collisions via observables sensitive to radial flow, enhanced baryon-to-meson ratios, and strangeness enhancement. The results are also compared with the Monte Carlo generator and hydrodynamic calculations to test whether such photonuclear collisions may produce small droplets of quark-gluon plasma that flow collectively.

H & He induced nuclear reactions↗