Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase Transition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Properties of solid and gaseous hydrogen, based upon anisotropic pair interactions

Properties of H2 are studied on the basis of an analytic anisotropic potential deduced from atomic orbital and perturbation calculations. The low-pressure solid results are based on a spherical average of the anisotropic potential. The ground state energy and the pressure-volume relation are calculated. The metal-insulator phase transition pressure is predicted. Second virial coefficients are calculated for H2 and D2, as is the difference in second virial coefficients between ortho and para H2 and D2.

Etters, R. D.↗

Exact solution of the Lifshitz equations governing the growth of fluctuations in cosmology

The exact solution of the Lifshitz equations governing the cosmological evolution of an initial fluctuation is presented. Lifshitz results valid for squares of the sound velocity equal to zero and 1/3 are extended in closed form to any equation of state where the pressure equals the total energy density times the square of the sound velocity. The solutions embody all the results found previously for special cases of the square of the sound velocity. It is found that the growth of any initial fluctuation is only an exponential function of time with an exponent of not more than 4/3 and is insufficient to produce galaxies unless the initial fluctuation is very large. A possible way to produce very large initial fluctuations by modifying the equation of state by including gravitational interactions is also examined. It is found that a phase transition can occur at baryonic density of 1 nucleon per cubic Planck length or equivalently, at a time of about 10 to the -43rd power sec. At those early times, the masses allowed by causality requirements are too small to be of interest in galaxy formation.

Adams, P. J.↗

Proton magnetic relaxation and internal rotations in tetramethylammonium cadmium chloride

Nuclear magnetic resonance (NMR) and relaxation studies of the proton spin-lattice relaxation time (PSLRT) and proton second moment (PSM) are reported. Tetramethylammonium cadmium chloride (TMCC) was selected as a diamagnetic member of the isomorphic series, and hence proton data relate directly to the motion of the tetramethylammonium ion in the absence of paramagnetic ions. In the model adopted, the correlation time for hindered motion of one of the methyl groups differs from that of the other three groups in the low-temperature phase below 104 K. PSLRT and PSM values agree closely with experimental data with this model. Crystallographic phase transitions in TMCC occur at 104 K and 119 K according to the PSLRT measurements. Dipolar interactions between adjacent protons account for the PSLR rates below 104 K.

Tsang, T.↗

Energy storage possibilities of atomic hydrogen

The possibility of storing large amounts of energy in a free radical system such as atomic hydrogen is analyzed. Attention is focused on theoretical calculations of the ground state properties of spin-aligned atomic triplet hydrogen, deuterium, and tritium. The solid-liquid phase transition in atomic hydrogen is also examined.

Etters, R. D.↗

A test of the comet hypothesis of the Tunguska Meteor Fall - Nature of the meteor 'thermal' explosion paradox

The hypothesis that a comet was responsible for the Tunguska Meteor Fall is rejected because the hypothesis does not seem to account for the intense terminal spherical shock. A porous meteoroid model is proposed, and an analysis indicates that an entity of this type might produce an aerodynamic heat flux large enough to account for the terminal meteor explosion. It is suggested that the presence of olivine and of highly irregular macrostructure in meteors might indicate the presence of some porosity. For a highly porous meteoroid, it is postulated that during entry into the atmosphere the aerodynamic heat transfer at its external or pore walls would become so intensified as to cause either complete ablation with popping or a solid-liquid-vapor phase transition accompanied by an explosion.

Liu, V. C.↗

On the origin of Hawking mini black-holes and the cold early universe

A simple argument is outlined leading to the result that the mass of mini black holes exploding today is 10 to the 15th power g. A mathematical model is discussed which indicates that the equation of state is greatly softened in the high-density regime and a phase transition may exist, such that any length (particularly very small sizes) will grow with time irrespective of its relation to the size of the particle horizon. It is shown that the effect of spin-2 mesons with respect to the equation of state is to soften the pressure and make it negative. An analytical expression is given for the probability that any particular region in a hot early universe will evolve into a black hole.

Canuto, V.↗

Diffusion and phase change characterization by mass spectrometry

The high temperature diffusion of trace elements in metals and alloys was investigated. Measurements were made by high sensitivity mass spectrometry in which individual atoms were detected, and quantitative data was obtained for zircaloy-2, 304 stainless steel, and tantalum. Additionally, a mass spectrometer was also an analytical tool for determining an allotropic phase change for stainless steel at 955 C, and a phase transition region between 772 C and 1072 C existing for zircaloy-2. Diffusion rates were measured in thin (0.001" (0.0025 cm) and 0.0005" (0.0013 cm)) ribbons which were designed as high temperature thermal ion sources, with the alkali metals as naturally occurring impurities. In the temperature and pressure regime where diffusion measurements were made, the solute atoms evaporated from the ribbon filaments when the impurities diffused to the surface, with a fraction of these impurity atoms ionized according to the Langmuir-Saha relation. The techniques developed can be applied to many other alloys important to space vehicles and supersonic transports; and, with appropriate modifications, to the diffusion of impurities in composites.

Koslin, M. E.↗

Optical, spin-resonance, and magnetoresistance studies of /tetrathiatetracene/2/iodide/3 - The nature of the ground state

A recent investigation in which Isett and Perez-Albuerne (1977) found that (tetrathiatetracene)2(iodine)3 is a stable organic metal down to 3.3 K is of considerable interest. In view of the diversity of suggestions made regarding this compound, measurements, were made of its electrical, magnetic, and optical properties. The results obtained indicate a metallic state at high temperatures, but also support a nonmetallic state at temperatures below 30 K. At 20-30 K, a metal-to-insulator phase transition occurs. This is indicated by the onset of a large and positive magnetoresistance, the leveling off in the temperature dependence of the ESR linewidth, and by recent derivative analysis of the electrical conductivity in this region. The investigated compound represents an interesting one-dimensional electronic system in which it may be possible to study the combined effects of disorder and interchain coupling on charge transport processes.

Somoano, R. B.↗

Five micron limb-darkening and the structure of the Jovian atmosphere

A combined radiative, dynamical, and chemical model of the Jovian atmosphere is presented which reproduces the observed IR limb-darkening curves for several regions on the disk of Jupiter. Two approaches are used to perform the inversion required for determination of the source function, and a power-series-expansion model is examined, along with a convective-equilibrium model, cloud and intermediate-zone models, and a thin-shell model. The statistical methods used in the analysis are outlined, and model fits to the observations are discussed. The chemistry of phase transitions in the hot spots of Jupiter's equatorial belt is briefly investigated.

Newman, W. I.↗

Isothermal-desorption-rate measurements in the vicinity of the Curie temperature for H2 chemisorbed on nickel films

Measurements of the isothermal desorption rate of H2 chemisorbed onto polycrystalline nickel films made for temperatures spanning the Curie temperature of the nickel film are presented. Desorption kinetics were followed by measuring the decay of the change in resistance of the nickel film brought about by hydrogen chemisorption after gas-phase H2 had been rapidly evacuated. The desorption rate is found to undergo an anomalous decrease in the vicinity of the Curie temperature, accompanied by an increase in the desorption activation energy and the equilibrium constant for the chemisorbed hydrogen. The results are interpreted in terms of anomalous variations in rate constants for the formation of the precursor molecular adsorbed state and the chemisorbed atomic state due to the phase transition in the nickel. The changes in rate constants are also considered to be in qualitative agreement with theoretical predictions based on a spin coupling between the adatom and the magnetic substrate.

Shanabarger, M. R.↗

On the dynamics of agglomerating ensembles of clouds

It is shown that for dynamical time scales longer than 10 million years the ensemble of interstellar cold diffuse clouds may be described by equations of mass and momentum conservation where the pressure has the form p/v-squared/ where /v-squared/ is the mass averaged square velocity dispersion. Equilibrium cloud spectra are derived and an equation of state obtained. The equation of state undergoes a phase transition at a critical density close to the local interstellar gas density. At higher densities, more massive clouds are formed and the cloud fluid softens. It is suggested that this mechanism may naturally regulate the interstellar gas density if star formation is very efficient in the cooler high-density systems.

Cowie, L. L.↗

The optically thin dust shell of Nova Cygni 1978

Nova Cygni 1978 was monitored photometrically from V to 19.5 microns for 120 days after the eruption. Following the initial expansion of the hot gas shell, an optically thin dust shell formed and reached a maximum visual optical depth of about 0.1 by day 60. No visible transition phase of the type observed in the very dusty DQ Herculis novae occurred in Nova Cygni 1978. It is argued that dust grain growth was inhibited because of the low mass of condensable atoms in the shell. Although the dust shell in Nova Cygni 1978 was optically thin at visual and infrared wavelengths, the grains grew to a radius of 0.3 micron which is comparable to the radius of the grains which grow in the optically thick shells of the DQ Herculis type novae.

Gehrz, R. D.↗

Surface tension-driven convection phenomena

The techniques for measuring surface tension-driven flow are reported. In addition to the fairly standard crossed beam LDV method, methods using ripplon scattering which do not require seeding of the fluid were developed. These methods can be used to determine thermophysical properties of the surface, such as surface tension, viscosity, and local temperature. This technique was utilized to observe the change in surface tension associated with the nematic to isotropic phase transition of para-azoxydianisole at 134 C. The ripplon scattering methods become difficult for surface velocities below 1 mm/sec because of the overlapping spectra. Careful analysis procedures could extend this to smaller flows, but the more conventional LDV techniques with seeded flows are the method of choice for slow flows.

Mann, J. A., Jr.↗

Numerical and classical analysis of V/STOL aircraft using selected propulsion systems

The development needed for the evolution of selected V/STOL research vehicles into optimized antisubmarine warfare (ASW) aircraft configurations, using numerical procedures and traditional analytical methods, has been examined. Three propulsion systems, which represent state-of-the-art development aimed at solving the thrust-vectoring and attitude-control problems of V/STOL aircraft, are analyzed. The use of NASA computer programs for aircraft synthesis (ACSYNT), and for optimizing configurations (COMMIN), coupled with contractor-supplied propulsion system data provides for accurate performance prediction of the selected ASW configurations. Particular emphasis on the transition phase between the research vehicle and the optimized configuration demonstrates the strengths and weaknesses of using generic research aircraft instead of building prototypes to demonstrate new technology

Wilson, S. B., III↗

Metal and Bi/Pb microdistribution studies of an L3 chondrite - Their implications for a meteorite parent body

Strong localizations relative to bulk are reported of Bi, and to a lesser extent Pb, in some of the kamacite grains in Khohar, while other kamacite grains show no such enrichments. Distinctive and correlated differences in the Ni content are found in the two kamacite populations, with the Bi/Pb-rich kamacite grains having consistently lower Ni levels than the 6-7% typical of the Bi/Pb-poor kamacite. The Bi/Pb-rich kamacite grains also exhibit a highly reactive attack upon etching, which may be due to a finely polycrystaline microstructure. It is concluded that the trace element microdistributions were not established in the nebula, and that the enrichments were not likely to have occurred with slow cooling in the presence of a vapor phase during the kamacite-taenite phase transitions.

Woolum, D. S.↗

Development and fabrication of a solar cell junction processing system

Modifications to the ground plane, to insure a good electrical return path during the pulse discharge, were made using a ring of beryllium copper finger stock attached to the underside of the aluminum ground plate. Experiments on annealing of wafers with ion implantation damage continued. The entire surface of 100 mm diameter wafers were annealed by one pulse for the standard implant (10 keV, phosphorus, 2x10 to the 15th power ions/sq cm). While samples are being fabricated into solar cells for electrical characterization, work is continuing on improvement of the electron beam uniformity and the optimization of the diode parameters. The engineering design was completed and the manufacturing detail drawings were released for fabrication. Assembly of the subcomponents for the exit and entrance locks is almost complete. These components include the cassettes, the indexing mechanisms, main doors, and wafer carrier transfer modules. The 'Y' track and three phase transition track sections are under final assembly and test.

Giesling, R.↗

Laboratory Research

To properly interpret the rapidly growing body of data from comet observations, many types of laboratory measurements are needed. These include: (1) molecular spectroscopy in the visible, ultraviolet, infrared and microwave region of the spectra; (2) laser fluorescent spectroscopy of photofragments; (3) laboratory cross-section or reaction rate measurements using flow tube techniques, fluorescent spectroscopy detection for neutrals and ion-molecule reaction techniques; (4) experiments to simulate solar-wind interactions with comets; (5) studies of the properties and behavior of ice mixtures; (6) experiments on the sublimation rate of ice, and the phase transition from amorphous to crystalline ice; (7) investigations of the irradiation of ice; and (8) the electron impact dissociation and excitation of molecules of cometary interest. A nearly completed experiment on the proton irradiation of ice is described.

Donn, B.↗

An investigation of the kinetics for hydrogen chemisorption on iron metal surfaces

A quasi-isothermal approach was used to study the kinetics of hydrogen and hydrogen sulfide chemisorption onto iron film in an effort to understand the environmental degradation of steels. The coverage of chemisorbed hydrogen or chemisorbed sulfur was observed as a function of time for fixed conditions of substrate temperature. Auger electron spectroscopy was used to observe the sulfur and chemisorption-induced resistance change was employed to monitor hydrogen coverage. To compare the results obtained from studying the kinetics by two different techniques, the kinetics of oxygen chemisorption onto iron films was also studied. A reaction model utilized to interpret the H2/Fe2 chemisorption kinetics was applied to data from an earlier study on the desorption kinetics for H2 chemisorbed onto nicket films in the vicinity of the Curie temperature of the film. This analysis permitted a separation of the gross desorption process into individual components so that the influence of the magnetic phase transition on the rate constants could be determined.

Shanabarger, M. R.↗