Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Regenerable Air Purification System for Gas-Phase Contaminant Control

Tests of a pre-prototype regenerable air purification system (RAPS) that uses water vapor to displace adsorbed contaminants from an adsorbent column have been performed at NASA Ames Research Center. A unit based on this design can be used for removing trace gas-phase contaminants from spacecraft cabin air or from polluted process streams including incinerator exhaust. During the normal operation mode, contaminants are removed from the air on the column. Regeneration of the column is performed on-line. During regeneration, contaminants are displaced and destroyed inside the closed oxidation loop. In this presentation we discuss initial experimental results for the performance of RAPS in the removal and treatment of several important spacecraft contaminant species from air.

Constantinescu, Ileana C.↗

Experimental and modeling studies of PR and ND oxalate solubility to high ionic strengths: Insight into actinide(III) oxalates

Actinide oxalates are chemical compounds important to nuclear industry, ranging from actinide separation in waste reprocessing, to production of specialty actinides, and to disposal of high level nuclear waste (HLW) and spent nuclear fuel (SNF). In this study, the solubility constants for Pr 2 (C 2 O 4 ) 3 •10H 2 O and Nd 2 (C 2 O 4 ) 3 •10H 2 O by performing solubility experiments in HNO 3 and mixtures of HNO 3 and H 2 C 2 O 4 at 23.0 ± 0.2 °C have been determined. The targeted starting materials, Pr 2 (C 2 O 4 ) 3 •10H 2 O and Nd 2 (C 2 O 4 ) 3 •10H 2 O, were successfully synthesized at room temperature using PrCl 3 , NdCl 3 and oxalic acid as the source metrials. Then, we utilized the targeted solubility-controlling phases to conduct solubility measurements. There was no phase change over the entire periods of experiments, demonstrating that Pr 2 (C 2 O 4 ) 3 •10H 2 O and Nd 2 (C 2 O 4 ) 3 •10H 2 O were the solubility-controlling phases in our respective experiments. Based on our experimental data, we have developed a thermodynamic model for Pr 2 (C 2 O 4 ) 3 •10H 2 O and Nd 2 (C 2 O 4 ) 3 •10H 2 O in the mixtures of HNO 3 and H 2 C 2 O 4 to high ionic strengths. The model for Pr 2 (C 2 O 4 ) 3 •10H 2 O reproduces well the reported experimental data for Pu 2 (C 2 O 4 ) 3 •10H 2 O, which are not utilized for the model development, demonstrating that Pr(III) is an excellent analog for Pu(III). Similarly, the model for Nd 2 (C 2 O 4 ) 3 •10H 2 O reproduces the solubility of Am 2 (C 2 O 4 ) 3 •10H 2 O and Cm 2 (C 2 O 4 ) 3 •10H 2 O. The Pitzer model was used for the calculation of activity coefficients. Based on the published, well established model for dissociation constants for oxalic acid and stability constants for actinide-oxalate complexes [i.e., AmC 2 O 4 + , and Am(C 2 O 4 ) 2 - ] to high ionic strengths, we have obtained the solubility constants (log 10 K 0 ) for the following reactions at 25 °C, Pr 2 (C 2 O 4 ) 3 •10H 2 O ⇌ 2Pr 3+ + 3C 2 O 4 2- + 10H 2 O(l). Nd 2 (C 2 O 4 ) 3 •10H 2 O ⇌ 2Nd 3+ + 3C 2 O 4 2- + 10H 2 O(l). to be -30.82 ± 0.30 (2σ), and - 31.14 ± 0.35 (2σ), respectively. These values for can be directly applied to Pu 2 (C 2 O 4 ) 3 •10H 2 O, Am 2 (C 2 O 4 ) 3 •10H 2 O and Cm 2 (C 2 O 4 ) 3 •10H 2 O. The model established for actinide oxalates by this study provides the needed knowledge with regard to solubilities of actinide/REE oxalates at various ionic strengths, and is expected to find applications in many fields, including the geological disposal of nuclear waste and the mobility of REE under the surface conditions, as Pr 2 (C 2 O 4 ) 3 •10H 2 O and Nd 2 (C 2 O 4 ) 3 •10H 2 O can be regarded as the pure Pr and Nd end-members of deveroite, a recently discovered natural REE oxalate with the following stoichiometry, (Ce 1.01 Nd 0.33 La 0.32 Pr 0.11 Y 0.11 Sm 0.01 Pb 0.04 U 0.03 Th 0.01 Ca 0.04 ) 2.01 (C 2 O 4 ) 2.99 •9.99H 2 O. Regarding its importance in the geological disposal of nuclear waste, Am 2 (C 2 O 4 ) 3 •10H 2 O/Pu 2 (C 2 O 4 ) 3 •10H 2 O/Cm 2 (C 2 O 4 ) 3 •10H 2 O can be the source-term phase for actinides, as demonstrated by the instance in the disposal in clay/shale formations. This is exemplified by the stability of Am 2 (C 2 O 4 ) 3 •10H 2 O in comparison with Am(OH) 3 (am), Am(OH) 3 (s) and AmCO 3 (OH)(s) under the relevant geological repository conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Regenerable Air Purification System for Gas-Phase Contaminant Control

A regenerable air purification system (RAPS) that uses water vapor to displace adsorbed contaminants from an. adsorbent column into a closed oxidation loop is under development through cooperative R&D between Vanderbilt University and NASA Ames Research Center. A unit based on this design can be used for removing trace gas-phase contaminants from spacecraft cabin air or from polluted process streams including incinerator exhaust. Recent work has focused on fabrication and operation of a RAPS breadboard at NASA Ames, and on measurement of adsorption isotherm data for several important organic compounds at Vanderbilt. These activities support the use and validation of RAPS modeling software also under development at Vanderbilt, which will in turn be used to construct a prototype system later in the project.

Constantinescu, Ileana C.↗

Phase-angle controller for Stirling engines

An actuator includes a restraint link adapted to be connected with a pivotal carrier arm for a force transfer gear interposed between the crankshaft for an expander portion of a Stirling engine and a crankshaft for the displacer portion of the engine. The restraint link is releasably trapped hydraulic fluid for selectively establishing a phase angle relationship between the crankshaft. A second embodiment incorporates a hydraulic coupler for use in varying the phase angle of gear-coupled crank fpr a Stirling engine whereby phase angle changes are obtainable.

Mcdougal, A. R.↗

X-ray nanodiffraction studies of ionically controlled nanoscale phase separation in cobaltites

Complex oxide heterostructures provide access to emergent functional and structural phases that are not present in the bulk constituent materials. In this Rapid Communication, we focus on $La_{0.67}Sr_{0.33}CoO_3$ (LSCO)/Gd heterostructures due to the high oxygen ion conductivity, as well as the coupled magnetic and electronic properties of LSCO, which are strongly dependent on the oxygen stoichiometry. This combination of properties enables the ionic control of the functional properties of LSCO thin films through the presence of oxygen getter layers such as Gd.We utilize x-ray nanodiffraction to directly image the nanoscale morphology of LSCO thin films as they are progressively transformed from the equilibrium perovskite phase to the metastable brownmillerite (BM) phase with increasing Gd thickness. Our studies show the coexistence of perovskite and BM phases with a critical oxygen vacancy concentration threshold which leads to the formation of extended BM filaments. In addition to lateral phase separation, we observed phase separation within the film thickness possibly due to pinning of the perovskite and BM phases by the substrate/LSCO and LSCO/Gd interface, respectively. Our studies provide a nanoscale survey of the phase separation in the cobaltites and shed light on the formation of the metastable BM phase.

36 MATERIALS SCIENCE↗

Technology Enablers for Advanced Gasoline Compression Ignition Engines

To meet current emission regulations and increasingly demanding global fleet CO2 standards on fuel economy and future trends towards life cycle GHG emissions, advanced combustion engines remain significant in the passenger vehicle sector to achieve high efficiency and low emissions over the full operating range. Lean burn gasoline compression ignition (GCI) technology has shown to have the most potential in reaching these goals, although it faces challenges in the operating range. In this study, an advanced GCI engine is considered with the capability to operate under two combustion modes, namely low temperature combustion (LTC) and GCI. They are enabled with the use of two Hyundai in-house developed technologies; an advanced valve control mechanism known as continuously variable valve duration (CVVD) and a high-pressure gasoline injection system. At low load, the engine utilizes dual CVVD and dual CVVT (continuously variable valve timing) mechanisms for both intake and exhaust valvetrains to enable NVO (negative valve overlap) to trap hot residuals. The hot residuals enable low load auto-ignition, and the phasing control of that auto-ignition is achieved by varying the degrees of NVO, and in turn, the amount of hot residuals. This is done in real time with respect to the changes in engine loads or operating conditions, significantly improving cylinder-phasing control in LTC mode, and subsequently is able to realize a fuel economy gain and reduced emission benefits. Early direct injection during NVO or intake stroke is used to form homogenous or quasi-homogenous air-fuel mixture for LTC. At mid to high loads, late direct injection of gasoline or GCI mode is employed to take advantage of the high volatility and high resistance to auto-ignition of gasoline fuel, so that diesel-engine like high combustion efficiency can be achieved with lower soot emissions for the same NOx level as diesel combustion. In this paper, the key control and fueling technologies that enable this multiple mode combustion are introduced, and the resultant analysis on engine test and CFD simulation at LTC and GCI operating conditions are presented in detail.

Gasoline compression ignition, low temperature com↗

Tailoring the Intermediate Phase to Control Formation of γ‑CsPbI3 Films

Controlling the crystallization pathway of inorganic CsPbI3 perovskite is essential for achieving high efficiency and stability in optoelectronic devices. Here, we report a solvent-engineering strategy that combines an antisolvent process with vacuum treatment (AVT) to modulate evaporation dynamics of the precursor, guiding the formation of highly oriented (CH3)2NH2PbI3 (DMAPbI3) and Cs4PbI6 intermediate phases. Synchrotron and in situ analyses revealed correlations between intermediate orientation and γ-CsPbI3 crystallinity. This directional crystallization pathway promotes vertical alignment and grain enlargement in γ-CsPbI3 films, resulting in fewer voids, lower defect densities, and reduced tensile strain. Photovoltaic devices based on AVT-processed films achieved a power conversion efficiency of 18.47% with a fill factor of 83.14% and retained 101.9% of their initial efficiency after 526 h without encapsulation. This study first reports that the quality of DMAPbI3 and Cs4PbI6 intermediates, controlled by combination of antisolvent and vacuum treatment, plays a crucial role in achieving high-quality γ-CsPbI3 films.

Yoon, Geon Woo↗

In Situ Growth of Ni 2 P–Cu 3 P Bimetallic Phosphide with Bicontinuous Structure on Self-Supported NiCuC Substrate as an Efficient Hydrogen Evolution Reaction Electrocatalyst

A direct and effective approach is proposed to fabricate bimetallic phosphide Ni 2 P–Cu 3 P with controllable phase compn. and distribution for catalytic hydrogen evolution reaction (HER). Unlike previously reported precursors, a porous Ni-Cu alloy incorporated with graphitic carbon (NiCuC) prepd. via powder metallurgy is employed herein, and the generated Ni 2 P–Cu 3 P@NiCuC possesses a hierarchical porous structure and controllable phase compn. due to the high porosity and tunable Ni/Cu ratio of the precursor. With an optimal Cu content of 30.0 wt. %, the catalyst demonstrates the highest catalytic activity due to a synergistic interaction between different metallic phosphide sites and the facilitated mass transport. Meanwhile, d. functional theory (DFT) calcn. reveals that the at. interaction of Ni 2 P–Cu 3 P substantially lower the activation barrier for enhanced HER catalytic activity. Finally, the powder metallurgy provides an approach for the design of bimetallic phosphide electrocatalysts for HER and other catalytic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A parity-time symmetric coherent plasmonic absorber-amplifier

Non-Hermitian parity-time (PT)-symmetric optical potentials have led to a new class of unidirectional photonic components based on the spatially symmetric and balanced inclusion of loss and gain. While most proposed and implemented PT-symmetric optical devices have wavelength-scale dimensions, no physical constraints preclude development of subwavelength PT-symmetric components. We theoretically demonstrate a nanoscale PT-symmetric, all-optical plasmonic modulator capable of phase-controlled amplification and directional absorption. The modulator consists of two deeply subwavelength channels composed of either gain or loss dielectric material, embedded in a metallic cladding. When illuminating on-resonance by two counter-propagating plane waves, the aperture's total output can be modulated by changing the phase offset between the two waves. Modulation depths are greater than 10 dB, with output power varying from less than one half of the incident power to more than six times amplification. Off-resonance, the aperture possesses strong phase-controlled directionality with the output from one side varying from perfect absorption to strong scattering and transmission. The device design provides a platform for nanoscale all-optical modulators with gain while potentially enabling coherent perfect absorption and lasing in a single, compact structure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

3D field phase-space control in tokamak plasmas

Here, a small relaxation of the axisymmetric magnetic field of a tokamak into a non-axisymmetric three-dimensional (3D) configuration can be effective to control magnetohydrodynamic instabilities, such as edge-localized modes. However, a major challenge to the concept of 3D tokamaks is that there are virtually unlimited possible choices for a 3D magnetic field, and most of them will only destabilize or degrade plasmas by symmetry breaking. Here, we demonstrate the phase-space visualization of the full 3D field-operating windows of a tokamak, which allows us to predict which configurations will maintain high confinement without magnetohydrodynamic instabilities in an entire region of plasmas. We test our approach at the Korean Superconducting Tokamak Advanced Research (KSTAR) facility, whose 3D coils with many degrees of freedom in the coil space make it unique for this purpose. Our experiments show that only a small subset of coil configurations can accomplish edge-localized mode suppression without terminating the discharge with core magnetohydrodynamic instabilities, as predicted by the perturbative 3D expansion of plasma equilibrium and the optimizing principle of local resonance. The prediction provided excellent guidance, implying that our method can substantially improve the efficiency and fidelity of the 3D optimization process in tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optical control of electron phase space in plasma accelerators with incoherently stacked laser pulses

It is demonstrated that synthesizing an ultrahigh-bandwidth, negatively chirped laser pulse by incoherently stacking pulses of different wavelengths makes it possible to optimize the process of electron self-injection in a dense, highly dispersive plasma (n{sub 0}∼10{sup 19} cm{sup −3}). Avoiding transformation of the driving pulse into a relativistic optical shock maintains a quasi-monoenergetic electron spectrum through electron dephasing and boosts electron energy far beyond the limits suggested by existing scaling laws. In addition, evolution of the accelerating bucket in a plasma channel is shown to produce a background-free, tunable train of femtosecond-duration, 35–100 kA, time-synchronized quasi-monoenergetic electron bunches. The combination of the negative chirp and the channel permits acceleration of electrons beyond 1 GeV in a 3 mm plasma with 1.4 J of laser pulse energy, thus offering the opportunity of high-repetition-rate operation at manageable average laser power.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Polymorph (C{sub 2}N{sub 2}H{sub 10}){sub 0.5}RE{sub 3}F{sub 10}·xH{sub 2}O (RE = Ho-Lu, Y) and REF{sub 3} nanocrystals: Hydrothermal synthesis, characterization and luminescence

Graphical abstract: A hydrothermal system is developed to prepare one new polymorph of (C{sub 2}N{sub 2}H{sub 10}){sub 0.5}RE{sub 3}F{sub 10}·xH{sub 2}O and known rare earth fluorides involving REF{sub 3} nanocrystals under mild condition. Highlights: ► A new polymorph of (C{sub 2}N{sub 2}H{sub 10}){sub 0.5}RE{sub 3}F{sub 10}·xH{sub 2}O has been synthesized. ► The RE{sup 3+} radius decides the shape evolution and phase control for REF{sub 3} NCs. ► The RE{sup 3+} radius has influence on the microstructure and morphology of REF{sub 3} NCs. -- Abstract: In this paper, a solvents-thermal system is developed to prepare one new polymorph of (C{sub 2}N{sub 2}H{sub 10}){sub 0.5}Ho{sub 3}F{sub 10}·xH{sub 2}O and rare earth fluorides REF{sub 3} nanocrystals under mild condition. It is found that the ionic radius of RE{sup 3+} is the key factor responsible for the shape evolution and phase control for rare earth fluorides nanocrystals at selected temperatures, which has an influence on the microstructure and morphology of the products to some extent. With the increase of the atomic number, the shape of fluoride changes from hexagonal REF{sub 3} phase (RE = La, Sm) to orthorhombic REF{sub 3} phase (RE = Eu-Dy), and finally to diamond structure (C{sub 2}N{sub 2}H{sub 10}){sub 0.5}Ho{sub 3}F{sub 10}·xH{sub 2}O (RE = Ho, Er, Tm, Yb, Lu, Y). In addition, the characteristic energy level transition {sup 5}D{sub 0}–{sup 7}F{sub 1} of Eu{sup 3+} splits into 585 and 591 nm emission peaks, and the dominant peak is the orange emission at 591 nm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Automated and High-Throughput Phase Separation Control for Supramolecular Polymer Blends Enabled by Machine Learning

Supramolecular polymer blends (SPBs) offer tunable morphologies that dictate their macroscopic properties, yet their rational design is limited by the absence of predictive structure−morphology models. Here, we introduce a data-driven highthroughput workflow that integrates modular polymer synthesis, robotic formulation, automated morphology characterization, and machine learning (ML) for accelerated SPB discovery. Using a plug-and-play synthetic strategy, 33 hydrogen-bonding endfunctional homopolymers were prepared and orthogonally combined to generate 260 SPBs in 1 day. A fully automated atomic force microscopy (AFM) pipeline enabled systematic imaging, producing 2340 morphology data sets with minimal human intervention. Domain spacings were extracted through complementary imageprocessing methods and used to train ML models. A support vector regression (SVR) model accurately predicted target phase-separation sizes (50, 100, and 150 nm), which were experimentally validated. This work demonstrates the power of coupling high-throughput experimentation with ML to accelerate morphology discovery and provides one of the first large-scale experimental data sets for supramolecular polymer systems.

ML-guided polymer design↗

π–π Stacking Distance and Phase Separation Controlled Efficiency in Stable All-Polymer Solar Cells

The morphology of the active layer plays a crucial role in determining device performance and stability for organic solar cells. All-polymer solar cells (All-PSCs), showing robust and stable morphologies, have been proven to give better thermal stability than their fullerene counterparts. However, outstanding thermal stability is not always the case for polymer blends, and the limiting factors responsible for the poor thermal stability in some All-PSCs, and how to obtain higher efficiency without losing stability, still remain unclear. By studying the morphology of poly [2,3-bis (3-octyloxyphenyl) quinoxaline-5,8-diyl-alt-thiophene-2,5-diyl](TQ1)/poly[4,8-bis[5-(2-ethylhexyl)-2-thienyl]benzo[1,2-b:4,5-b']dithiophene-alt-(4-(2-ethylhexyl)-3-fluorothieno[3,4-b]thiophene-)-2-carboxylate-2-6-diyl]] (PCE10)/PNDI-T10 blend systems, we found that the rearranged molecular packing structure and phase separation were mainly responsible for the poor thermal stability in devices containing PCE10. The TQ1/PNDI-T10 devices exhibited an improved PCE with a decreased π–π stacking distance after thermal annealing; PCE10/PNDI-T10 devices showed a better pristine PCE, however, thermal annealing induced the increased π–π stacking distance and thus inferior hole conductivity, leading to a decreased PCE. Thus, a maximum PCE could be achieved in a TQ1/PCE10/PNDI-T10 (1/1/1) ternary system after thermal annealing resulting from their favorable molecular interaction and the trade-off of molecular packing structure variations between TQ1 and PCE10. This indicates that a route to efficient and thermal stable All-PSCs can be achieved in a ternary blend by using material with excellent pristine efficiency, combined with another material showing improved efficiency under thermal annealing.

morphology↗

Use of Adaptive Injection Strategies to Increase the Full Load Limit of RCCI Operation

Dual-fuel combustion using port-injection of low reactivity fuel combined with direct injection (DI) of a higher reactivity fuel, otherwise known as reactivity controlled compression ignition (RCCI), has been shown as a method to achieve low-temperature combustion with moderate peak pressure rise rates, low engine-out soot and NO x emissions, and high indicated thermal efficiency. A key requirement for extending to high-load operation is moderating the reactivity of the premixed charge prior to the diesel injection. One way to accomplish this is to use a very low reactivity fuel such as natural gas. In this work, experimental testing was conducted on a 13 l multicylinder heavy-duty diesel engine modified to operate using RCCI combustion with port injection of natural gas and DI of diesel fuel. Engine testing was conducted at an engine speed of 1200 rpm over a wide variety of loads and injection conditions. The impact on dual-fuel engine performance and emissions with respect to varying the fuel injection parameters is quantified within this study. The injection strategies used in the work were found to affect the combustion process in similar ways to both conventional diesel combustion (CDC) and RCCI combustion for phasing control and emissions performance. As the load is increased, the port fuel injection (PFI) quantity was reduced to keep peak cylinder pressure (PCP) and maximum pressure rise rate (MPRR) under the imposed limits. Overall, the peak load using the new injection strategy was shown to reach 22 bar brake mean effective pressure (BMEP) with a peak brake thermal efficiency (BTE) of 47.6%.

Hanson, Reed↗

Muon Acceleration-RLA and FFAG

Various acceleration schemes for muons are presented. The overall goal of the acceleration systems: large acceptance acceleration to 25 GeV and 'beam shaping' can be accomplished by various fixed field accelerators at different stages. They involve three superconducting linacs: a single pass linear Pre-accelerator followed by a pair of multi-pass Recirculating Linear Accelerators (RLA) and finally a non-scaling FFAG ring. The present baseline acceleration scenario has been optimized to take maximum advantage of appropriate acceleration scheme at a given stage. The solenoid based Pre-accelerator offers very large acceptance and facilitates correction of energy gain across the bunch and significant longitudinal compression trough induced synchrotron motion. However, far off-crest acceleration reduces the effective acceleration gradient and adds complexity through the requirement of individual RF phase control for each cavity. The RLAs offer very efficient usage of high gradient superconducting RF and ability to adjust path-length after each linac pass through individual return arcs with uniformly periodic FODO optics suitable for chromatic compensation of emittace dilution with sextupoles. However, they require spreaders/recombiners switchyards at both linac ends and significant total length of the arcs. The non-scaling Fixed Field Alternating Gradient (FFAG) ring combines compactness with very large chromatic acceptance (twice the injection energy) and it allows for large number of passes through the RF (at least eight, possibly as high as 15).

43 PARTICLE ACCELERATORS↗

Insertion Magnets

Chapter 3 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temperature and density. To sustain and extend its discovery potential, the LHC will need a major upgrade in the 2020s. This will increase its luminosity (rate of collisions) by a factor of five beyond the original design value and the integrated luminosity (total collisions created) by a factor ten. The LHC is already a highly complex and exquisitely optimised machine so this upgrade must be carefully conceived and will require about ten years to implement. The new configuration, known as High Luminosity LHC (HL-LHC), will rely on a number of key innovations that push accelerator technology beyond its present limits. Among these are cutting-edge 11-12 tesla superconducting magnets, compact superconducting cavities for beam rotation with ultra-precise phase control, new technology and physical processes for beam collimation and 300 metre-long high-power superconducting links with negligible energy dissipation. The present document describes the technologies and components that will be used to realise the project and is intended to serve as the basis for the detailed engineering design of HL-LHC.

43 PARTICLE ACCELERATORS↗