SEARCH · Search NASA

Results for “Plot”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Identifying the Best High‐Biomass Sorghum Hybrids Based on Biomass Yield Potential and Feedstock Quality Affected by Nitrogen Fertility Management Under Various Environments

The growing interest in high-biomass sorghum ( Sorghum bicolor L. Moench), hereafter referred to as sorghum, as a bioenergy feedstock in the United States requires an understanding of geographical adaptation to identify the most suitable hybrids for the Midwest. In this study, 13 sorghum hybrids (H1–H13) were evaluated for biomass yield potential in central and southern IL over two growing seasons (2022 and 2023). In addition to biomass yield, the effects of nitrogen (N) fertilization on yield, nutrient removal (N, P, and K), and feedstock composition (cellulose, hemicellulose, lignin, and soluble fractions) were determined to identify the best-performing sorghum hybrid across environmental gradients. The experimental design was a split-plot arrangement within a randomized complete block design with four replications at each of two locations: N rates (0 and 112 kg-N ha −1 ) as a whole plot factor and 13 sorghum hybrids as a subplot factor. As a result, complex genotypes (13 hybrids) by environment (2 sites and 2 years) and management (2 N rates) interactions were observed in biomass yield. The best hybrids at both sites were H1 (ATx2932/F10702_PSL) and H13 (TX08001), which were very photoperiod sensitive (PS). These hybrids produced superior biomass yield, and they also exhibited less nutrient removal and high energy-rich feedstock compositions (cellulose, hemicellulose, and lignin). Biomass yield potential was associated with morphological and phenological traits according to environmental conditions. Low-yielding hybrids were short-stature (H5 and H6) with pollinators (F10801_PSL-3dw and F10805_PSL-3dw) that are recessive at the Dw3 locus. Moderate PS hybrids (H7, H8, H11, and H12) that produced grain panicles at harvest showed high biomass yield plasticity and excessive nutrient removal as they accumulated high K concentrations in biomass tissues and high N and P in grain panicles.

09 BIOMASS FUELS↗

DOE OSTI2025

Secondary corundum‐bearing assemblages in Allende Ca,Al‐rich inclusions: Mineralogy, petrology, oxygen, and aluminum–magnesium isotope systematics

Here, we report on the mineralogy, petrology, oxygen, and aluminum–magnesium isotopic systematics of the secondary corundum-bearing assemblages in type B CAIs 3529Z and 3529G and fluffy type A (FTA) CAI ALH-2 from Allende (CV > 3.6). In 3529Z and 3529G, 2–5 μm-sized euhedral-to-subhedral corundum grains associate with secondary alumoåkermanite [(Ca,Na) 2 AlSi 2 O 7 ], grossular, spinel, grossite, celsian, kushiroite, and wadalite. In ALH-2, 2–5 μm-sized euhedral-to-subhedral corundum grains associate with secondary grossular, nepheline, spinel, and kushiroite. In 3529Z and 3529G, corundum and associated secondary grossite, spinel, alumoåkermanite, grossular, and kushiroite have similar 16 O-poor compositions (Δ 17 O = −2.2 ± 1.5‰); primary spinel is 16 O-rich (Δ 17 O ~ −23‰); Al,Ti-diopside shows a range of Δ 17 O (from ~ −24‰ to ~ −15‰); anorthite and melilite are 16 O-depleted to various degrees (−6.5‰ ≤ Δ 17 O ≤ −4.5‰ and Δ 17 O = −2.7 ± 0.8‰, respectively). In ALH-2, corundum shows a range of Δ 17 O, from ~ −9‰ to ~ −1‰; primary hibonite and spinel are 16 O-rich (Δ 17 O ~ −23‰); melilite and perovskite are 16 O-poor (Δ 17 O = −2.6 ± 1.5‰ and −3.1 ± 1.3‰, respectively). On the Al-Mg isotope diagram ( 26 Mg* versus 27 Al/ 24 Mg), primary Al,Ti-diopside, hibonite, melilite, and spinel in the Allende CAIs studied along the canonical isochron with inferred initial 26 Al/ 27 Al ratio [( 26 Al/ 27 Al) 0 ] of ~5 × 10 −5 . All secondary minerals have resolved excesses of 26 Mg*: alumoåkermanite, corundum, and grossite plot below the canonical isochron, whereas most spinel analyses plot above it. An internal isochron defined by the coexisting secondary corundum and alumoåkermanite in 3529Z has ( 26 Al/ 27 Al) 0 = (7.5 ± 2.6) × 10 −7 . We conclude that the corundum-bearing assemblages in Allende CAIs resulted from metasomatic alteration of primary melilite and anorthite, ~4–5 Ma after their crystallization. Metasomatic alteration of CAIs in the Allende parent asteroid by an aqueous fluid having Δ 17 O of ~ −3 ± 2‰ modified the O-isotope composition of their primary melilite, anorthite, and Ti-rich pyroxene; O-isotope compositions of primary hibonite, spinel, and low-Ti pyroxene escaped this modification.

Geosciences↗

DOE OSTI2023

Mycorrhizal effects on crop yield and soil ecosystem functions in a long‐term tillage and fertilization experiment

Summary It is well understood that agricultural management influences arbuscular mycorrhizal (AM) fungi, but there is controversy about whether farmers should manage for AM symbiosis. We assessed AM fungal communities colonizing wheat roots for three consecutive years in a long‐term (> 14 yr) tillage and fertilization experiment. Relationships among mycorrhizas, crop performance, and soil ecosystem functions were quantified. Tillage, fertilizers and continuous monoculture all reduced AM fungal richness and shifted community composition toward dominance of a few ruderal taxa. Rhizophagus and Dominikia were depressed by tillage and/or fertilization, and their abundances as well as AM fungal richness correlated positively with soil aggregate stability and nutrient cycling functions across all or no‐tilled samples. In the field, wheat yield was unrelated to AM fungal abundance and correlated negatively with AM fungal richness. In a complementary glasshouse study, wheat biomass was enhanced by soil inoculum from unfertilized, no‐till plots while neutral to depressed growth was observed in wheat inoculated with soils from fertilized and conventionally tilled plots. This study demonstrates contrasting impacts of low‐input and conventional agricultural practices on AM symbiosis and highlights the importance of considering both crop yield and soil ecosystem functions when managing mycorrhizas for more sustainable agroecosystems.

Peng, Zhenling↗

DOE OSTI2025

Machine-learning-enabled on-the-fly analysis of RHEED patterns during thin film deposition by molecular beam epitaxy

Thin film deposition is a fundamental technology for the discovery, optimization, and manufacturing of functional materials. Deposition by molecular beam epitaxy (MBE) typically employs reflection high-energy electron diffraction (RHEED) as a real-time in situ probe of the growing film. However, the state-of-the-art for RHEED analysis during deposition requires human observation. Here, we present an approach using machine learning (ML) methods to monitor, analyze, and interpret RHEED images on-the-fly during thin film deposition. In the analysis workflow, RHEED pattern images are collected at one frame per second and featurized using a pretrained deep convolutional neural network. The feature vectors are then statistically analyzed to identify changepoints; these changepoints can be related to changes in the deposition mode from initial film nucleation to a transition regime, smooth film deposition, and in some cases, an additional transition to a rough, islanded deposition regime. The feature vectors are additionally analyzed via graph analysis and community classification. The graph is quantified as a stabilization plot, and we show that inflection points in the stabilization plot correspond to changes in the growth regime. The full RHEED analysis workflow is termed RHAAPsody and includes data transfer and output to a visual dashboard. We demonstrate the functionality of RHAAPsody by analyzing the precaptured RHEED images from epitaxial depositions of anatase TiO2 on SrTiO3(001) and show that the analysis workflow can be executed in less than 1 s. Our approach shows promise as one component of ML-enabled real-time feedback control of the MBE deposition process.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Characterizing particle-based thermal storage performance using optical methods for use in next generation concentrating solar power plants

Concentrating Solar Power (CSP) generation is an attractive option for low-emission power generation; however, the high costs of thermal storage associated with concentrating solar create a large barrier for their use and adaptation into modern life. Lowering their operation costs, while maintaining high thermal storage and transfer performance is essential. Solid particle-based heat exchange systems can reduce CSP cost but are often less efficient. Efforts to increase their performance have led to use of binary size particle mixes. Presented is an optical-based thermal analysis technique used to measure near-wall thermal conductivity of particle beds essential in determining their heat exchanger efficiency. Modulated Photothermal Radiometry is used to make dynamic temperature measurements, allowing for the extraction of the most relevant thermal properties like thermal conductivity, specific heat, and effusivity. The system uses a modulated laser source causing a damped periodic heat flux, resulting in a frequency and thermal property dependent surface temperature, of which is measured using radiometry. Lock-In techniques are used to extrapolate the amplitude of the signal. Plotting the amplitude against the root angular frequency allows for effusivity measurement by ratio to a known sample. Using specific heat measurements from literature and density measurements, the thermal conductivity of the particle mixes can be calculated. The simplicity of MPTR to probe through the depth of the bed is ideal for use in CSP for dynamic thermal performance monitoring.

Corona, Javier↗

DOE OSTI2020

Multidecadal shifts in forest plant diversity and community composition across glacial landforms in northern lower Michigan, USA

Understanding how plant community assemblage is affected by spatial and temporal patterns is crucial to understanding forest ecosystem responses to disturbance, including future climate change. In this article, we tracked how diversity and composition are distributed through space and time in a midsuccessional mixed hardwood forest in northern lower Michigan, United States. This region’s geographically and abiotically distinct glacial landforms influence both the spatial and temporal dynamics of its forest communities. Vegetation sampling plots (n = 87) were established at the University of Michigan Biological Station in 1990 and resampled in 2015. Vegetation in the overstory, sapling, and groundcover layers was censused. Abiotic variables, including elevation, pH, and soil nutrients, were measured in a subset of plots (n = 40). There were strong differences in diversity and community composition among glacial landforms, with the moraine having a 31% greater species richness in the groundcover layer compared with those of the other glacial landforms. Surprisingly, plant communities across all three vegetation layers showed little change over the 25-year period, and we found no evidence of differences in successional rates among glacial landforms. Our findings indicate that glacial landforms have a large influence on the production and maintenance of local plant diversity and community composition in this area and suggest that successional dynamics may manifest themselves over much longer time periods in these northern biomes.

Forestry↗

DOE OSTI2021

Radiative three-body D -meson decays in and beyond the standard model

We study radiative charm decays D → P 1 P 2γ , P 1,2 = π, K in QCD factorization at leading order and within heavy hadron chiral perturbation theory. Branching ratios including resonance contributions are around ~10 –3 for the Cabibbo-favored modes into Kπγ and ~10 –5 for the singly Cabibbo-suppressed modes into π + π – γ,K + K – γ, and thus in reach of the flavor factories BES III and Belle II. Dalitz plots and forward–backward asymmetries reveal significant differences between the two QCD frameworks; such observables are therefore ideally suited for a data-driven identification of relevant decay mechanisms in the standard-model dominated D → Kπγ decays. This increases the potential to probe new physics with the D → π + π – γ and D → K + K – γ decays, which are sensitive to enhanced dipole operators. CP asymmetries are useful to test the SM and look for new physics in neutral |ΔC| = 1 transitions. Cuts in the Dalitz plot enhance the sensitivity to new physics due to the presence of both s- and t, u-channel intermediate resonances.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2023

Toward extracting $$\gamma $$ from $$B\rightarrow DK$$ without binning

Abstract $$B^\pm \rightarrow DK^\pm $$ B ± → D K ± transitions are known to provide theoretically clean information about the CKM angle $$\gamma $$ γ , with the most precise available methods exploiting the cascade decay of the neutral D into CP self-conjugate states. Such analyses currently require binning in the D decay Dalitz plot, while a recently proposed method replaces this binning with the truncation of a Fourier series expansion. In this paper, we present a proof of principle of a novel alternative to these two methods, in which no approximations at the level of the data representation are required. In particular, our new strategy makes no assumptions about the amplitude and strong phase variation over the Dalitz plot. This comes at the cost of a degree of ambiguity in the choice of test statistic quantifying the compatibility of the data with a given value of $$\gamma $$ γ , with improved choices of test statistic yielding higher sensitivity. While our current proof-of-principle implementation does not demonstrate optimal sensitivity to $$\gamma $$ γ , its conceptually novel approach opens the door to new strategies for $$\gamma $$ γ extraction. More studies are required to see if these can be competitive with the existing methods.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2022

Computational Estimation by Scientific Data Mining with Classical Methods to Automate Learning Strategies of Scientists

Experimental results are often plotted as 2-dimensional graphical plots (aka graphs) in scientific domains depicting dependent versus independent variables to aid visual analysis of processes. Repeatedly performing laboratory experiments consumes significant time and resources, motivating the need for computational estimation. The goals are to estimate the graph obtained in an experiment given its input conditions, and to estimate the conditions that would lead to a desired graph. Existing estimation approaches often do not meet accuracy and efficiency needs of targeted applications. We develop a computational estimation approach called AutoDomainMine that integrates clustering and classification over complex scientific data in a framework so as to automate classical learning methods of scientists. Knowledge discovered thereby from a database of existing experiments serves as the basis for estimation. Challenges include preserving domain semantics in clustering, finding matching strategies in classification, striking a good balance between elaboration and conciseness while displaying estimation results based on needs of targeted users, and deriving objective measures to capture subjective user interests. These and other challenges are addressed in this work. The AutoDomainMine approach is used to build a computational estimation system, rigorously evaluated with real data in Materials Science. Our evaluation confirms that AutoDomainMine provides desired accuracy and efficiency in computational estimation. It is extendable to other science and engineering domains as proved by adaptation of its sub-processes within fields such as Bioinformatics and Nanotechnology.

Computer Science↗

DOE OSTI2023

ALGEBRA v.1.27

The ALGEBRA program allows the user to manipulate data from a finite element analysis before it is plotted. The finite element output data is in the form of variable values (e.g., stress, strain, and velocity components) in an EXODUS II database. The ALGEBRA program evaluates user-supplied functions of the data and writes the results to an output EXODUS II database that can be read by plot programs.

Sjaardema, Gregory↗

DOE OSTI2021

Igor Pro procedures for ARPES analysis (ARPES Igor procedures) v21.0

A suite of non-proprietary C-like procedures (code) that compile and run within the commercial Igor Pro data analysis program (wavemetrics.com) have been developed for the data file loading, plotting and analysis of Angle-Resolved Photoemission Spectroscopy (ARPES) data. The data file loading procedures are more specific to ARPES data acquisition and file formats at Advanced Light Source (ALS) beamlines, while plotting and analysis procedures are more generic to processing of 1D, 2D and higher dimensional dataset arrays with some specific tools tailored to the ARPES technique.

Rotenberg, Eli↗

DOE OSTI2022

Ring Pull Strain Analysis

Ring Pull Strain Analysis (RPSA) is a framework for analysis of Digital Image Correlation (DIC) data of gaugeless ring pull testing. It is meant for analysis of rings cut from tube cross sections and pulled in a displacement-controlled tensile test. This code takes load frame data, images take during testing, and csv files from the DIC analysis of those images and allows the user to analyze and plot data from the test. Some important features of the software include getting the strain values as a function of radial distance and angle, plotting of the strain around the ring, and stress-strain analysis of the load frame data.

Beck, Peter↗

DOE OSTI2023

UEDGE toolbox

The UEDGE Toolbox supplies an object-based interface and a wide array of tools used for running and analyzing UEDGE simulations. The toolbox provides routines for setting up UEDGE cases using YAML input files, shorthand commands for restoring converged solutions, as well as plotting profiles and surface plots of any of the parameters in UEDGE. Furthermore, the toolbox provides the necessary objects for compiling and analyzing parameter scans consisiting of several UEDGE simulations.

Holm, AndreasM↗

DOE OSTI2023

coloring v.1.0

SAND2024-02435O The software coloring allows applications written in the C++ language to generate publication-quality 2D plots. Its functionality is similar to Microsoft Excel's chart functionality or the Python language's matplotlib package. The value of coloring is that it is written purely in C++ and thus can be compiled on systems where Python is not available and linked into high performance computing software. For drawing shapes onto an image, coloring uses the mathematical definition of quadratic Bezier splines and uses Newton's method to search for the closest point on a spline to a given query point. This is then used to do accurate sub-pixel sampling to get clean, non-pixelated images. For working with the actual plot data, coloring has basic statistical methods such as finding maxima and minima as well as axis scaling such as logarithms. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Ibanez, Daniel↗

DOE OSTI2024

Ring Pull Strain Analysis

Beck, Peter↗

DOE OSTI2024

ThunderBoltz API

The ThunderBoltz application programming interface (API) code is written in Python and is comprised of a set of tools to facilitate compilation of the ThunderBoltz code, as well as fast assembly and formatting of input files for the ThunderBoltz code, post-processing tools of ThunderBoltz results, plotting tools, and runs/schedules the ThunderBoltz code executable for calculations. The ThunderBoltz API code is utilized for importing and manipulating input cross section sets, input conditions, and any other simulation settings made available within the ThunderBoltz input deck via user-defined settings or via automatic generation. The API comes with a set of plotting capabilities of input cross sections, results from ThunderBoltz, and post-processed results carried out with the API.

Park, Ryan↗

DOE OSTI2022

Psychrometric Chart v1.0.0

Psychart is a graphical program developed for NERSC for accurately monitoring air conditions for the air cooled HPC equipment. Psychart will live directly in the OMNI system as a Grafana plugin. It employs the use of Psychrolib and the Grafana Starter Panel to create a front-end program that plots the state of the environmental air on a psychrometric chart. It is highly customizable, allowing the user to modify graph bounds, optionally show ASHRAE data center comfort regions, change the series point color, and more. What sets Psychart apart from other existing psychrometric charts is its ability to plot in real-time. Other psychrometric charts that can be found online require manual input of data and do not seamlessly integrate with Grafana.

Ventura, Nicolas↗

DOE OSTI2025

ggtaxplot v 0.0.1

ggtaxplot is an R package designed to process and visualize taxonomic data through a taxonomic river plot. This package is ideal for researchers and data scientists who need to visualize taxonomic data. ggtaxplot function processes data and generates a taxonomic river plot, allowing users to visualize the distribution of taxa across different samples.

Coclet, Clement [Lawrence Berkeley National Labora↗