Search NASA⌕ Search

SEARCH · Search NASA

Results for “Polymer Networks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Supramolecular Control of Ionic Retention in Electrolyte-Gated Synaptic Transistors

Electrolyte-gated transistors with ion-trapping layers offer a promising platform for artificial synapses in neuromorphic computing, yet molecular mechanisms governing ionic retention remain poorly understood. Here, in this study, we present a supramolecular approach to modulate ion retention by incorporating a crown ether derivative-based polymer network as an ion-trapping layer on top of a semiconducting monolayer. We show that the balance between ion–host binding and ion–solvent interactions dictates the kinetics of ion capture and release, which in turn controls the memory characteristics of the device. By varying the solvent dielectric constant, we tune the ionic retention time from nearly permanent trapping to rapid relaxation. Intermediate solvent polarity enables programmable short- and long-term synaptic behaviors, including excitatory postsynaptic current, paired-pulse facilitation, and long-term potentiation and depression. These findings establish a direct link between supramolecular ion recognition and synaptic plasticity and provide a generalizable design strategy for ionic–electronic neuromorphic devices.

36 MATERIALS SCIENCE↗

Poly(oxime–ester) Vitrimers with Catalyst-Free Bond Exchange

Vitrimers are network polymers that undergo associative bond exchange reactions in the condensed phase above a threshold temperature, dictated by the exchangeable bonds comprising the vitrimer. For vitrimers, chemistries reliant on poorly nucleophilic bond exchange partners (e.g., hydroxy-functionalized alkanes) or poorly electrophilic exchangeable bonds, catalysts are required to lower the threshold temperature, which is undesirable in that catalyst leaching or deactivation diminishes its influence over time and may compromise reuse. Here we show how to access catalyst-free bond exchange reactions in catalyst-dependent polyester vitrimers by obviating conventional ester bonds in favor of oxime-esters. Poly(oxime-ester) (POE) vitrimers are synthesized using thiol-ene click chemistry, affording high stretchability and malleability. Finally, POE vitrimers are readily recycled with little degradation of their initial mechanical properties, suggesting exciting opportunities for sustainable plastics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Flexible monomer-based covalent organic frameworks: design, structure and functions

The design and synthesis of flexible monomer-based covalent organic frameworks (COFs) have been considered a challenge. We describe the design and synthesis of a new flexible monomer-based COF, termed PPN-30 (PPN meaning porous polymer network), by the use of a flexible alkyl amine, 1,4-cyclohexanediamine, combined with 1,3,5-triformylbenzene. The structure and gas adsorption properties of PPN-30 were carefully investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The bond rupture force for sulfur chains calculated from quantum chemistry simulations and its relevance to the tensile strength of vulcanized rubber

From quantum chemistry simulations using density functional theory, we obtain the total electronic energy of an eight-atom sulfur chain as its end-to-end distance is extended until S–S bond rupture occurs. We find that a sulfur chain can be extended by about 40% beyond its nominally straight conformation, where it experiences rupture at an end-to-end tension of about 1.5 nN. Using this rupture force as the chain failure limit in an explicit polymer network simulation model (EPnet), we predict the tensile failure stress for sulfur crosslinked (vulcanized) natural rubber. Furthermore, quantitative agreement with published experimental data for the failure stress is obtained in these simulations if we assume that only about 30% of the sulfur chains produce viable network crosslinks. Surprisingly, we also find that the failure stress of a rubber network does not scale linearly with the chain failure force limit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding why poly(acrylic acid) works: decarbonylation and cross-linking provide an ionically conductive passivation layer in silicon anodes

Poly(acrylic acid) (PAA) is commonly used as a binder for fabricating silicon (Si) anode active materials in lithium-ion batteries due to its useful properties including high polar solvent solubility, good rheology, and strong adhesive properties. However, the role and evolution of PAA during electrode fabrication, cycling, and calendar aging are not well understood. In this work, we reveal the evolution of PAA during electrode curing and relate its chemical change to the final electrode properties and performance. These studies are made possible using two types of in situ attenuated total reflectance-infrared Fourier transform (ATR-FTIR) spectroscopy: thermal ATR-FTIR to probe the cross-linking reaction, and ATR-FTIR spectroelectrochemistry of three-dimensional composite electrodes, a unique technique developed herein that probes the solvation dynamics of lithium ions at the silicon anode interface under electrochemical polarization. Specifically, we show that PAA undergoes a thermally-mediated, cross-linking decarbonylation reaction to form an ether-based network polymer. To show the importance of the polyether moieties, we synthesize partially esterified PAA analogues that do not undergo this cross-linking decarbonylation reaction and correlate the degree of cross-linking to half-cell performance metrics. Finally, we unveil the mechanism of the polyether binder performance through in situ ATR-FTIR spectroelectrochemistry and show that PAA acts as an interfacial material that conducts lithium-ions, limits solvent molecule access to the Si surface, and stabilizes the electrode against parasitic lithium inventory loss at high state of charge for an extended period of time.

25 ENERGY STORAGE↗

Regulating hydrogel mechanical properties with an electric field

Stimuli-responsive polymeric materials have attracted significant attention due to their ability to change properties in response to various external stimuli. Using an electric field as the stimulus is of particular interest as it possesses the potential for seamless integration of materials with electronic systems. While many materials with electric field responsive actuation have an associated mechanical property change, it is beneficial to develop materials that exhibit mechanical property changes without accompanying significant shape deformation. To address this challenge, here we designed a semi-interpenetrating polymer network (semi-IPN) hydrogel system containing both polyelectrolytes and salt ions, which enables electric field induced changes in mechanical properties while minimizing actuation. We first successfully verified the viability of our design by removing salt ions through a diffusion-only method where we witnessed the stiffness increased to 4.5 times the initial value while still being highly deformable. After this, we applied an electric field to transport the salt ions out of the hydrogel, as shown by both Raman spectroscopy and scanning electron microscopy. We were able to show a time-dependent stiffness increase, the maximum of which was 5 times the original stiffness. We quantified ion transport and water-splitting in the hydrogel by both experiments and simulations. Following this, we showed functional system reversibility by reversing the direction of the current to reinject salt ions into the semi-IPN hydrogel and reducing its stiffness to below the initial value. It's worth noting that our simulations enable us to understand the governing mechanisms behind ion generation and salt transport that leads to mechanical property changes. Finally, we were able to fabricate a spatially variable stiffness haptic interface with our hydrogel, with demonstrated reversibility and cyclability. This research can possibly find applications in soft robotics and haptics and also inspire the development of bio-compatible electronics related devices.

36 MATERIALS SCIENCE↗

Relationship between microporous structure and light gas transport through glassy polymeric membranes revealed by molecular simulations

Microporous glassy polymers are attractive materials for gas separation membranes, due to their high permeability and tailorable selectivity, provided physical aging can be delayed. The archetypal microporous glassy polymer, PTMSP, can be blended with a hyper-crosslinked isatin–triptycene porous polymer network (PPN) to delay physical aging. However, while PPN is effective at reducing physical aging, it also affects the permeability of light gases through PTMSP. Molecular dynamics simulations were used here to shed fundamental light on the mechanisms responsible for these effects. Atomistic models are developed that satisfactorily reproduce experimental observations such as matrix density and cavity size distributions for neat PTMSP as well as for PTMSP–PPN blends. Analysis of the simulation results suggests that physical aging is delayed because the PPN inclusions slow down PTMSP relaxation while reducing the connectivity between free volume pockets. To understand how PPN inclusions affect light gas permeability, the atomistic models developed are used to probe CO 2 and CH 4 diffusion and sorption. These simulations are conducted for PTMSP matrices exhibiting varying density, towards reproducing experimental permeability data. Interrogating the simulation trajectories, it is discovered that while CH 4 travels preferentially through the free volume cavities, CO 2 preferentially interacts with the available surfaces, especially in the presence of PPN. These differences help interpret experimental observations. The transport of C 2 H 6 and H 2 S through PTMSP matrices was also investigated. These gases, and in particular H 2 S, were found to absorb within PTMSP, yielding very low diffusion coefficients. The ability to predict differences in diffusion pathways for various natural gas components unveils the possibility of engineering membranes to control permeability and selectivity towards large-scale applications.

Bao Le, Tran Thi [Univ. of Oklahoma, Norman, OK (U↗

Crossing the bridge from molecular catalysis to a heterogenous electrode in electrocatalytic water oxidation

Significant progress has been made in designing single-site molecular Ru(II)-polypyridyl-aqua catalysts for homogenous catalytic water oxidation. Surface binding and transfer of the catalytic reactivity onto conductive substrates provides a basis for heterogeneous applications in electrolytic cells and dye-sensitized photoelectrosynthesis cells (DSPECs). Earlier efforts have focused on phosphonic acid (-PO 3 H 2 ) or carboxylic acid (-CO 2 H) bindings on oxide surfaces. However, issues remain with limited surface stabilities, especially in aqueous solutions at higher pH under conditions that favor water oxidation by reducing the thermodynamic barrier and accelerating the catalytic rate using atom-proton transfer (APT) pathways. Here, we address the problem by combining silane surface functionalization and surface reductive electropolymerization on mesoporous, nanofilms of indium tin oxide (ITO) on fluorine-doped tin oxide (FTO) substrates (FTO| nano ITO). FTO| nano ITO electrodes were functionalized with vinyltrimethoxysilane (VTMS) to introduce vinyl groups on the electrode surfaces by silane attachment, followed by surface electropolymerization of the vinyl-derivatized complex, [Ru II (Mebimpy)(dvbpy)(OH 2 )] 2+ (1 2+ ; Mebimpy: 2,6-bis(1-methyl-1 H -benzo[ d ]imidazol-2-yl)pyridine; dvbpy: 5,5'-divinyl-2,2'-bipyridine), in a mechanism dominated by a grafting-through method. The surface coverage of catalyst 1 2+ was controlled by the number of electropolymerization cycles. The combined silane attachment/cross-linked polymer network stabilized 1 2+ on the electrode surface under a variety of conditions especially at pH > ~6. Surface-grafted poly1 2+ was stable toward redox cycling at pH ~ 7.5 over an ~4-h period. Finally, sustained heterogeneous electrocatalytic water oxidation by the electrode gave steady-state currents for at least ~6 h with a Faradaic efficiency of ~68% for O 2 production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Charge segregation in weakly ionized microgels

Here we investigate microgels synthesized from N-isopropylacrylamide (NIPAM) copolymerized with a large mol% of acrylic acid, finding that when the acid groups are partially ionized at high temperatures, competition between ion-induced swelling and hydrophobic deswelling of poly(NIPAM) chains results in microphase separation. In cross-linked microgels, this manifests as a dramatic decrease in the ratio between the radius of gyration and the hydrodynamic radius to ~0.2, indicating that almost all the mass of the microgel is concentrated near the particle center. We also observe a concurrent decrease of the polymer network length scale via small-angle neutron scattering, confirming the presence of a dense, deswollen core surrounded by a diffuse, charged periphery. We compare these results to those obtained for a system of charged ultralow-cross-linked microgels; the form factor shows a distinct peak at high q when the temperature exceeds a threshold value. Lastly, we successfully fit the form factor to theory developed to describe scattering from weakly charged gels in poor solvents, and we tie this behavior to charge segregation in the case of the cross-linked microgels.

59 BASIC BIOLOGICAL SCIENCES↗

Stiffness anisotropy coordinates supracellular contractility driving long-range myotube-ECM alignment

The ability of cells to organize into tissues with proper structure and function requires the effective coordination of proliferation, migration, polarization, and differentiation across length scales. Skeletal muscle is innately anisotropic; however, few biomaterials can emulate mechanical anisotropy to determine its influence on tissue patterning without introducing confounding topography. Here, we demonstrate that substrate stiffness anisotropy coordinates contractility-driven collective cellular dynamics resulting in C2C12 myotube alignment over millimeter-scale distances. When cultured on mechanically anisotropic liquid crystalline polymer networks (LCNs) lacking topography, C2C12 myoblasts collectively polarize in the stiffest direction. Cellular coordination is amplified through reciprocal cell-ECM dynamics that emerge during fusion, driving global myotube-ECM ordering. Conversely, myotube alignment was restricted to small local domains with no directional preference on mechanically isotropic LCNs of the same chemical formulation. These findings provide valuable insights for designing biomaterials that mimic anisotropic microenvironments and underscore the importance of stiffness anisotropy in orchestrating tissue morphogenesis.

59 BASIC BIOLOGICAL SCIENCES↗

Fast and programmable locomotion of hydrogel-metal hybrids under light and magnetic fields

The design of soft matter in which internal fuels or an external energy input can generate locomotion and shape transformations observed in living organisms is a key challenge. Such materials could assist in productive functions that may range from robotics to smart management of chemical reactions and communication with cells. In this context, hydrated matter that can function in aqueous media would be of great interest. Here, we report the design of hydrogels containing a scaffold of high–aspect ratio ferromagnetic nanowires with nematic order dispersed in a polymer network that change shape in response to light and experience torques in rotating magnetic fields. The synergistic response enables fast walking motion of macroscopic objects in water on either flat or inclined surfaces and also guides delivery of cargo through rolling motion and light-driven shape changes. The theoretical description of the response to the external energy input allowed us to program specific trajectories of hydrogel objects that were verified experimentally.

36 MATERIALS SCIENCE↗

Bench Scale Thin Film Composite Hollow Fiber Membranes for Post-Combustion Carbon Dioxide Capture

GE Global Research, Idaho National Laboratory (INL), Georgia Institute of Technology (Georgia Tech), and Western Research Institute (WRI) proposed to develop high performance thin film polymer composite hollow fiber membranes and advanced processes for economical post-combustion carbon dioxide (CO 2 ) capture from pulverized coal flue gas at temperatures typical of existing flue gas cleanup processes. The project sought to develop and then optimize new gas separations membrane systems at the bench scale, including tuning the properties of a novel polyphosphazene polymer in a coating solution and fabricating highly engineered porous hollow fiber supports. The project also sought to define the processes needed to coat the fiber support to manufacture composite hollow fiber membranes with high performance, ultra-thin separation layers. Physical, chemical, and mechanical stability of the materials (individual and composite) towards coal flue gas components was considered via exposure and performance tests. Preliminary design, technoeconomic, and economic feasibility analyses were conducted to evaluate the overall performance and impact of the process on the cost of electricity (COE) for a coal-fired plant including capture technologies. At the onset of the project, Membranes based on coupling a novel selective material polyphosphazene with an engineered hollow fiber support was found to have the potential to capture greater than 90% of the CO 2 in flue gas with less than 35% increase in COE, which would achieve the DOE-targeted performance criteria. While lab-scale results for the polyphosphazene materials were very promising, and the material was incorporated into hollow-fiber modules, difficulties were encountered relating to the performance of these membrane systems over time. Performance, as measured by both flux of and selectivity for CO 2 over other flue gas constituents was found to deteriorate over time, suggesting a system that was more dynamic than initially hypothesized. These phenomena are believed to be associated with the physical and mechanical properties of the separation material, rather than chemical degradation by flue gas or one of its constituents. Strategies to improve the composite systems via alternate chemistries and processing techniques were only partially successful in creating a more robust system, but the research provided critical insight into the barriers to engineering sophisticated composite systems for gas separation. Promising concepts, including a re-engineering of the separation material with interpenetrating polymer networks were identified which may prove useful to future efforts in this field.

36 MATERIALS SCIENCE↗

Review of calcium carbonate incorporated hydrogels

Hydrogels are three-dimensional lightly cross-linked polymer networks that experience a volume change in response to slight environmental changes. 1,2 Hydrogels biocompatibility and drug release capabilities make them of interest for applications in biomineralization, depositing minerals in specific sites. A mineral of interest is calcium carbonate, an insoluble mineral utilized by organisms normally for mechanical strength. Researchers have investigated calcium carbonate loaded hydrogels for applications such as bone regeneration. A literature review on calcium carbonate incorporated hydrogels and the investigation into mechanical properties, crystal growth, and regenerative properties of the materials is presented.

36 MATERIALS SCIENCE↗

Engineering Accessible Adsorption Sites in MOFs for CO 2 Capture (Final Report)

The overall goal of this project was to synthesize metal-organic frameworks (MOFs) with improved CO 2 adsorption and selectivity properties for potential application in removing this greenhouse gas from flue gas streams during fossil fuel processing. MOFs are an important class of 2-dimensional (2D) and 3D supramolecular coordination polymer networks that are comprised of organic linkers (ligands) and metal ion-units or clusters. They generally possess very high surface area, porosity, variable thermal stability and tunable chemistry, which make them potentially candidates CO 2 adsorption. The three specific objectives of this project were as follows: 1) To synthesize MOFs with metal ions adsorption sites in more accessible locations within the structures (towards the center of the organic linkers) in order to enhance their CO 2 adsorption characteristics; 2) To investigate the CO 2 adsorption properties of new MOFs containing pyrazine- and other nitrogen containing ligands as possible improved alternatives to known amine-functionalized MOFs; and 3) To investigate the nature of the adsorption sites and mechanism(s) by conducting computational studies on CO 2 adsorption within the MOF structures and compare the results with experimental observations. The main outcomes of this research are as follows. Nitrogen-containing ligands that possesses a diaza-12-crown-4-ether moiety at the center of two phenylcarboxylic acid groups was utilized to synthesize 3D MOFs in which the added transition metal ions (i.e.CO 2 + and Mn2+) were coordinated within the crown moieties. Therefore, the structures had the metal ions in more accessible locations. The new 3D structures, being non-porous however, showed negligible adsorption capacity for CO 2 . The ligand 2,3,5,6,-pyrazinetetracarboxylic acid (PZTC) was successfully used to synthesize four new MOFs, each with one of the following metal ion; Ca2+(1D), Zn2+(2D), Mn2+ (3D) and Gd3+(3D), and with the dimensionality (D) indicated. The Ca-, Zn- and Mn- PZTC-based MOFs had no obvious accessible pores and showed no adsorption capacity for CO 2 . Gd-PZTC structure however, showed promising capacities of 1.0 mmol/g and 0.6 mmol/g at 273K and 298 K respectively. Another nitrogen-containing ligand explored was 2,2’-dinitro- trans-4,4’- stilbenedicarboxylic acid (DNSDC) and in combination with a co-ligand, 2,2’-bipyridine (2,2’-BPY). The combination of DNSDC with CO 2 + and Mn2+ yielded four new thermally stable MOFs that showed significant CO 2 absorption capacities. The experimental CO 2 adsorption capacities varied among the structures, ranging between 1.8 mmol/g at 256 K and 0.8 mmol/g at 298K. The DNSDC-based structures maintained significant stability and capacities over many adsorption cycles at 298K. With 2,2’-diamino- trans-4,4’-stillbene dicarboxylic acid (DASDC) as ligand instead of DNSDC, new 3D MOF structures were also synthesized. The structures however were less stable, and decomposed on activation (exposure to vacuum and or solvents) and therefore showed negligible CO 2 adsorption capacities. The dinitro-stilbene based MOFs showed promising CO 2 adsorption capacities, thermal stabilities and recyclability, and therefore showed potential for application in CO 2 removal from flue gas. The research accomplishments presented herein supports the Department of Energy’s (DOE) Office of Fossil Energy and the National Energy Technology Laboratory (NETL) mission in the area of research that advances the science of coal technologies, specifically carbon capture and storage. The research outcomes can guide rational design/synthesis strategies towards producing advanced materials for CO 2 capture. However, further research is needed in order to develop the materials to meet or exceed capacities and stabilities that are reported for their counterparts.

20 FOSSIL-FUELED POWER PLANTS↗

Engineering Accessible Adsorption Sites in MOFs for CO 2 Capture

The overall goal of this project was to synthesize metal-organic frameworks (MOFs) with improved CO 2 adsorption and selectivity properties for potential application in removing this greenhouse gas from flue gas streams during fossil fuel processing. MOFs are an important class of 2-dimensional (2D) and 3D supramolecular coordination polymer networks that are comprised of organic linkers (ligands) and metal ion-units or clusters. They generally possess very high surface area, porosity, variable thermal stability and tunable chemistry, which make them potential candidates for CO 2 adsorption. The three specific objectives of this project were as follows: 1) To synthesize MOFs with metal ion adsorption sites in more accessible locations within the structures (towards the center of the organic linkers) in order to enhance their CO 2 adsorption characteristics; 2) To investigate the CO 2 adsorption properties of new MOFs containing pyrazine- and other nitrogen containing ligands as possible improved alternatives to known amine-functionalized MOFs; and 3) To investigate the nature of the adsorption sites and mechanism(s) by conducting computational studies on CO 2 adsorption within the MOF structures and compare the results with experimental observations. The main outcomes of this research are as follows: Nitrogen-containing ligands that possess a diaza-12-crown-4-ether moiety at the center of two phenylcarboxylic acid groups were utilized to synthesize 3D MOFs in which the added transition metal ions (i.e. Co 2+ and Mn 2+ ) were coordinated within the crown moieties. Therefore, the structures had the metal ions in more accessible locations. The new 3D structures, being non-porous however, showed negligible adsorption capacity for CO 2 . The ligand 2,3,5,6,-pyrazinetetracarboxylic acid (PZTC) was successfully used to synthesize four new MOFs, each with one of the following metal ions; Ca 2+ (1D), Zn 2+ (2D), Mn 2+ (3D) and Gd 3+ (3D), and with the dimensionality (D) indicated. The Ca-, Zn- and Mn- PZTC-based MOFs had no obvious accessible pores and showed no adsorption capacity for CO 2 . Gd-PZTC structure however, showed promising capacities of 1.0 mmol/g and 0.6 mmol/g at 273K and 298 K respectively. Another nitrogen-containing ligand explored was 2,2’-dinitro- trans-4,4’- stilbenedicarboxylic acid (DNSDC) and in combination with a co-ligand, 2,2’-bipyridine (2,2’-BPY). The combination of DNSDC with Co 2+ and Mn 2+ yielded four new thermally stable MOFs that showed significant CO 2 absorption capacities. The experimental CO 2 adsorption capacities varied among the structures, ranging between 1.8 mmol/g at 256 K and 0.8 mmol/g at 298K. The DNSDC-based structures maintained significant stability and capacities over many adsorption cycles at 298K. With 2,2’-diamino- trans-4,4’-stillbene dicarboxylic acid (DASDC) as ligand instead of DNSDC, new 3D MOF structures were also synthesized. The structures, however, were less stable, and decomposed on activation (exposure to vacuum and or solvents) and therefore showed negligible CO 2 adsorption capacities. The dinitro-stilbene based MOFs showed promising CO 2 adsorption capacities, thermal stabilities and recyclability, and therefore showed potential for application in CO 2 removal from flue gas. The research accomplishments presented herein support the Department of Energy’s (DOE) Office of Fossil Energy and the National Energy Technology Laboratory (NETL) mission in the area of research that advances the science of coal technologies, specifically carbon capture and storage. The research outcomes can guide rational design/synthesis strategies towards producing advanced materials for CO 2 capture. However, further research is needed in order to develop the materials to meet or exceed capacities and stabilities that are reported for their counterparts.

20 FOSSIL-FUELED POWER PLANTS↗

Multi-state Catalysts Modulated by Mechanical Force (Final Report)

The development of more efficient catalytic processes and new approaches to control catalytic activity and selectivity are central to the realization of more selective, atom economic, and energy efficient routes to value added chemicals and polymers. The reactivity and selectivity of a transition metal catalyst is intimately related to the ligand-sphere geometry and, in many cases, the ideal ligand geometry for one step of a catalytic cycle is poorly matched to the ideal ligand geometry for another, resulting in sub-optimal efficiency. Macroscopic mechanical forces are both large, potentially much larger than interatomic forces, and are directional and localized to an extent that differentiates them from other forms of energy input such as heat or light. As such, mechanical force represents a heretofore untapped approach to modulate catalyst geometry, with the potential to reversibly modulate catalyst geometry on the timescale of catalytic turnover or monomer enchainment. This project has addressed the fundamental challenges in material-to-molecule strain coupling associated with the development of a new class of mechanically responsive catalysts (mechanocatalysts) in which active organotransition metal catalysts are strategically embedded in a flexible polymer network such that application of external mechanical force (stretching or deformation) leads to modulation of catalyst geometry, and hence reactivity and selectivity. Our efforts during the tenure of this grant were directed toward the elucidation of force-reactivity relationships of elementary transformations that occur within the first coordination sphere of a transition metal complex employing stiff stilbene photoswitches tethered to a flexible bidentate phosphine ligand derived from MeOBiphep as molecular force probes which provide a range of compressive and extension forces to the coupled transition metal complex depending on the geometry of the stiff stilbene and length of the tethering chains. During the tenure of this grant, we have quantified the rate of C(sp 2 )-C(sp 2 ) reductive elimination from platinum(II) diaryl complexes containing bis(phosphine) force probe ligands as a function of mechanical force; compressive forces decreased the rate of reductive elimination whereas extension forces increased the rate relative to the strain-free MeOBiphep complex with a 3.4-fold change in rate over a ~290 pN range of restoring forces. In a similar manner, we have quantified the rate of oxidative addition of bromobenzene to low-ligated palladium(0) complexes containing force probe ligands as a function of mechanical force; compressive forces increase the rate of oxidative addition, whereas tensile forces decrease the rate with a ~6 fold change in rate across ~340 pN of force applied to the complexes. In both cases, experimental and computational analyses argue strongly against any significant force-induced perturbation of ground state geometry within the first coordination sphere of the reactant complexes. Rather, the force/rate behavior observed for these transformations across these ranges of forces is attributed to the coupling of force to the nuclear motion comprising the reaction coordinates for reductive elimination and oxidative addition. These results together inform the development of catalysts whose activity can be tuned by an external force that is adjusted within a catalytic cycle and suggest opportunities to experimentally map geometry changes associated with reactions in transition metal complexes and potential strategies for force-modulated catalysis.

99 GENERAL AND MISCELLANEOUS↗

Composite Alkaline Battery Electrolyte with Improved Hydroxide-Ion Transport Number

Giner, Inc. has developed a solid-state water-free hydroxide ion electrolyte that can be formed in a cell or battery to eliminate leakage of hazardous caustic liquid caused by ruptured cells and batteries with typical liquid electrolyte cells. The approach uses a pre-mix of block co-oligomers that, when mixed with a limited amount of hydroxide in methanol and a free radical catalyst, can be added to cells as a liquid prior to curing in situ. When cured, the interpenetrating polymer network (IPN) solid-state electrolytes are ionically conductive and have a transport number for hydroxide ion that is close to or equal to 1. Evidence was also presented that the IPN solid-state electrolytes could be combined with selected oxide particles with negative surface charge (to sequester the cation), creating a single ion (hydroxide ion) conductor electrolyte. Using this approach, improvements can be made in battery lifetime by limiting dissolution and crossover of electrode components (e.g., zinc as zincate ion and silver as silver oxide), which lead to dendrite shorting and loss of capacity. The approach is generally applicable to all rechargeable alkaline batteries.

25 ENERGY STORAGE↗