Search NASA⌕ Search

SEARCH · Search NASA

Results for “Power spectral density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Frequency noise measurement of diode-pumped Nd:YAG ring lasers

The combined frequency noise spectrum of two model 120-01A nonplanar ring oscillator lasers was measured by first heterodyne detecting the IF signal and then measuring the IF frequency noise using an RF frequency discriminator. The results indicated the presence of a 1/f-squared noise component in the power-spectral density of the frequency fluctuations between 1 Hz and 1 kHz. After incorporating this 1/f-squared into the analysis of the optical phase tracking loop, the measured phase error variance closely matches the theoretical predictions.

Chen, Chien-Chung↗
NASA NTRS1990

Application of a novel multi-stage signal parameter estimator to high dynamic GPS receivers

The performance of a novel multistage estimator when applied to the estimation of the position, velocity, and acceleration of high dynamic Global Positioning System (GPS) receivers is discussed. For the present application, a two-stage specialization of the more general estimation scheme is considered, wherein the first-stage algorithm is selected to be a modified least-squares algorithm operating upon the differential signal model and referred to as differential least-squares (DLS) and the second stage is simply an extended Kalman filter (EKF). In terms of the threshold on received carrier power-to-noise power spectral density ratio (CNR), when compared to the single-stage EKF algorithm, the DLS-EKF algorithm is about 1.5-2.0 dB better in terms of threshold and outperforms the crossproduct AFC (automatic frequency control) loop by 2-5 dB. For the case when data modulation is present, the proposed scheme provides an improvement of about 6 dB in terms of CNR compared to an earlier approximate MLE (maximum likelihood estimation) scheme. There are also very significant improvements in terms of other performance measures.

Kumar, R.↗
NASA NTRS1991

Spectral comparison of continuous Global Positioning System and strainmeter measurements of crustal deformation

Temporal power spectral density models of noise in continuous crustal deformation measurements obtained with the Global Positioning System (GPS) and high-quality strainmeters are compared. The crossover frequency at which GPS measurement noise is less than that of strainmeters is determined. Assuming GPS precision of 0.1 to 1 cm in horizontal components for baselines up to 100 km in length, local deformation monitoring with GPS may be preferable to strainmeters for observations of short-term deformation in under 6 months of continuous (at least daily) measurements. Short-period tropospheric path delays and multipath effects, which may obscure GPS-determined strain signals in local network measurements, also are discussed.

Tralli, David M.↗
NASA NTRS1990

Imaging other planetary systems from the moon

This paper studies the problem of using a telescope like the HST, only larger and sensitive to a wider range of wavelengths, to image systems of planets like the solar system around other stars. Both reflected starlight and thermal radiation from the planets are treated. The instrumental effects of aperture diffraction, scattering due to the power spectral density of telescope mirror surface errors, and telescope thermal emission are included. The integration time required to achieve a signal-to-noise ratio is computed at 5 for photon-statistical random errors only, which is a necessary but not sufficient criterion for detection at a confidence level of five standard deviations. A cold telescope on the moon with 16m aperture and the optical quality of HST could detect and characterize planets around nearby stars.

Brown, Robert A.↗
NASA NTRS1991

Evidence of chaotic pattern in solar flux through a reproducible sequence of period-doubling-type bifurcations

Presented here is a preliminary study of the limits to solar flux intensity prediction, and of whether the general lack of predictability in the solar flux arises from the nonlinear chaotic nature of the Sun's physical activity. Statistical analysis of a chaotic signal can extract only its most gross features, and detailed physical models fail, since even the simplest equations of motion for a nonlinear system can exhibit chaotic behavior. A recent theory by Feigenbaum suggests that nonlinear systems that can be led into chaotic behavior through a sequence of period-doubling bifurcations will exhibit a universal behavior. As the control parameter is increased, the bifurcation points occur in such a way that a proper ratio of these will approach the universal Feigenbaum number. Experimental evidence supporting the applicability of the Feigenbaum scenario to solar flux data is sparse. However, given the hypothesis that the Sun's convection zones are similar to a Rayleigh-Bernard mechanism, we can learn a great deal from the remarkable agreement observed between the prediction by theory (period doubling - a universal route to chaos) and the amplitude decrease of the signal's regular subharmonics. The authors show that period-doubling-type bifurcation is a possible route to a chaotic pattern of solar flux that is distinguishable from the logarithm of its power spectral density. This conclusion is the first positive step toward a reformulation of solar flux by a nonlinear chaotic approach. The ultimate goal of this research is to be able to predict an estimate of the upper and lower bounds for solar flux within its predictable zones. Naturally, it is an important task to identify the time horizons beyond which predictability becomes incompatible with computability.

Ashrafi, S.↗
NASA NTRS1992

Extended H2 synthesis for multiple degree-of-freedom controllers

H2 synthesis techniques are developed for a general multiple-input-multiple-output (MIMO) system subject to both stochastic and deterministic disturbances. The H2 synthesis is extended by incorporation of anticipated disturbances power-spectral-density information into the controller-design process, as well as by frequency weightings of generalized coordinates and control inputs. The methodology is applied to a simple single-input-multiple-output (SIMO) problem, analogous to the type of vibration isolation problem anticipated in microgravity research experiments.

Hampton, R. David↗
NASA NTRS1991

Evidence of chaotic pattern in solar flux through a reproducible sequence of period-doubling-type bifurcations

A preliminary study of the limits to solar flux intensity prediction, and of whether the general lack of predictability in the solar flux arises from the nonlinear chaotic nature of the Sun's physical activity is presented. Statistical analysis of a chaotic signal can extract only its most gross features, and detailed physical models fail, since even the simplest equations of motion for a nonlinear system can exhibit chaotic behavior. A recent theory by Feigenbaum suggests that nonlinear systems that can be led into chaotic behavior through a sequence of period-doubling bifurcations will exhibit a universal behavior. As the control parameter is increased, the bifurcation points occur in such a way that a proper ratio of these will approach the universal Feigenbaum number. Experimental evidence supporting the applicability of the Feigenbaum scenario to solar flux data is sparse. However, given the hypothesis that the Sun's convection zones are similar to a Rayleigh-Bernard mechanism, we can learn a great deal from the remarkable agreement observed between the prediction by theory (period doubling - a universal route to chaos) and the amplitude decrease of the signal's regular subharmonics. It is shown that period-doubling-type bifurcation is a possible route to a chaotic pattern of solar flux that is distinguishable from the logarithm of its power spectral density. This conclusion is the first positive step toward a reformulation of solar flux by a nonlinear chaotic approach. The ultimate goal of this research is to be able to predict an estimate of the upper and lower bounds for solar flux within its predictable zones. Naturally, it is an important task to identify the time horizons beyond which predictability becomes incompatible with computability.

Ashrafi, S.↗
NASA NTRS1991

The impact of NRZ data asymmetry on the performance of a space telemetry system

The author derives an expression for the power spectral density of an asymmetric nonreturn-to-zero (NRZ) data stream. This formula is used to investigate how the data bandwidth varies with data asymmetry. The threshold levels of undesired spectral components that fall into the carrier tracking loop bandwidth are determined by examining the derived spectral density. Based on this formula, a simple technique is developed for the computation of bit signal-to-noise ratio (SNR) degradation due to data asymmetry. The telemetry bit SNR degradations derived using this technique are compared with the results obtained previously by Simon et al. (1978) and with measurements by the electronic systems test laboratory (ESTL) at the Johnson Space Center.

Nguyen, Tien M.↗
NASA NTRS1992

Large deflection random response of flat and blade stiffened carbon-carbon panels

The large deflection random response of flat and blade-stiffened carbon-carbon panels is studied both experimentally and analytically. The experimental data was obtained from tests performed in the Thermal Acoustic Fatigue Apparatus at NASA Langley. The analytical results were generated using a numerical simulation program that used the measured acoustic pressure as input. Comparisons of the measured and simulated power spectral densities are presented for several locations on each panel. A comparison of the rms strains at various locations on each panel is also discussed. The measured rms strains were generally a factor of two larger than the predicted. The effect of the nonlinearity was overpredicted at higher sound spectrum levels.

Robinson, J. H.↗
NASA NTRS1990

Loudness of shaped sonic booms

A loudness model is adopted to study the feasibility of designing and operating a supersonic transport to produce minimized sonic booms. The loudness contours in this technique extend to a lower frequency (1 Hz) and thus are appropriate for sonic booms that contain significant low frequency energy. Input to the loudness calculation procedure is the power spectral density of the pressure-time signature. Calculations of loudness, for both indoor and outdoor conditions, demonstrate that shaped sonic booms are potentially more acceptable than N-waves possessing the same peak overpressure.

Shepherd, Kevin P.↗
NASA NTRS1990

Predictions of launch-induced, near-field acoustics of clustered rocket engines using a scaling approach

A scaling technique is proposed for the prediction of clustered rocket engine, near-field acoustics. Scaling equations predict the mean square pressures and power spectral density (PSD) of an unknown vehicle, using near-field measurements from a similar vehicle. Separation of nonhomogeneous Shuttle acoustics into Space Shuttle Main Engine (SSME) and Solid Rocket Booster (SRB) component acoustics forms the basis for verification of the proposed scaling equations. Three separate models, based on the total Shuttle PSD, a three-SSME vehicle PSD, and a two-SRB vehicle PSD, are recommended for the Advanced Launch System (ALS) near-field predictions. Acoustic efficiency, equivalent diameter of closely/widely spaced clustered engines, and the use of a distance-dependent spectra for scaling ALS vehicle near-field acoustics are briefly addressed.

Sepcenko, Valentin↗
NASA NTRS1992

Automatic detection of anomalies in Space Shuttle Main Engine turbopumps

A prototype expert system (developed on both PC and Symbolics 3670 lisp machine) for detecting anomalies in turbopump vibration data has been tested with data from ground tests 902-473, 902-501, 902-519, and 904-097 of the Space Shuttle Main Engine (SSME). The expert system has been utilized to analyze vibration data from each of the following SSME components: high-pressure oxidizer turbopump, high-pressure fuel turbopump, low-pressure fuel turbopump, and preburner boost pump. The expert system locates and classifies peaks in the power spectral density of each 0.4-sec window of steady-state data. Peaks representing the fundamental and harmonic frequencies of both shaft rotation and bearing cage rotation are identified by the expert system. Anomalies are then detected on the basis of sequential criteria and two threshold criteria set individually for the amplitude of each of these peaks: a prior threshold used during the first few windows of data in a test, and a posterior threshold used thereafter. In most cases the anomalies detected by the expert system agree with those reported by NASA. The two cases where there is significant disagreement will be further studied and the system design refined accordingly.

Lo, Ching F.↗
NASA NTRS1993

CSI flight experiment projects of the Naval Research Laboratory

The Naval Research Laboratory (NRL) is involved in an active program of CSI flight experiments. The first CSI flight experiment of the Naval Research Laboratory, the Low Power Atmospheric Compensation Experiment (LACE) dynamics experiment, has successfully measured vibrations of an orbiting satellite with a ground-based laser radar. The observations, made on January 7, 8 and 10, 1991, represent the first ever measurements of this type. In the tests, a narrowband heterodyne CO2 laser radar, operating at a wavelength of 10.6 microns, detected vibration induced differential-Doppler signatures of the LACE satellite. Power spectral densities of forced oscillations and modal frequencies and damping rates of free-damped vibrations were obtained and compared with finite element structural models of the LACE system. Another manifested flight experiment is the Advanced Controls Technology Experiment (ACTEX) designed to demonstrate active and passive damping with piezo-electric (PZT) sensors and actuators. This experiment was developed under the management of the Air Force Phillips Laboratory with integration of the experiment at NRL. It is to ride as a secondary, or 'piggyback,' experiment on a future Navy satellite.

Fisher, Shalom↗
NASA NTRS1991

Optical phase-locked loop (OPLL) for free-space laser communications with heterodyne detection

Several advantages of coherent free-space optical communications are outlined. Theoretical analysis is formulated for an OPLL disturbed by shot noise, modulation noise, and frequency noise consisting of a white component, a 1/f component, and a 1/f-squared component. Each of the noise components is characterized by its associated power spectral density. It is shown that the effect of modulation depends only on the ratio of loop bandwidth and data rate, and is negligible for an OPLL with loop bandwidth smaller than one fourth the data rate. Total phase error variance as a function of loop bandwidth is displayed for several values of carrier signal to noise ratio. Optimal loop bandwidth is also calculated as a function of carrier signal to noise ratio. An OPLL experiment is performed, where it is shown that the measured phase error variance closely matches the theoretical predictions.

Win, Moe Z.↗
NASA NTRS1992

Novel multireceiver communication systems configurations based on optimal estimation theory

A novel multireceiver configuration for carrier arraying and/or signal arraying is presented. The proposed configuration is obtained by formulating the carrier and/or signal arraying problem as an optimal estimation problem, and it consists of two stages. The first stage optimally estimates various phase processes received at different receivers with coupled phase-locked loops wherein the individual loops acquire and track their respective receivers' phase processes but are aided by each other in an optimal manner via LF error signals. The proposed configuration results in the minimization of the the effective radio loss at the combiner output, and thus maximization of energy per bit to noise power spectral density ratio is achieved. A novel adaptive algorithm for the estimator of the signal model parameters when these are not known a priori is also presented.

Kumar, Rajendra↗
NASA NTRS1993

Estimation of random bending strain using a scanning laser vibrometer

Results are presented which were obtained from vibration measurements at discrete locations on a randomly excited structure to estimate the power spectral density of bending strain. The technique is intended to be applied using a scanning laser vibrometer to allow a non-contacting measurement of random bending strain over the surface of a structure. The experimental setup is described along with the data analysis procedure. The results presented here indicate that the method is practical and can lead to reliable estimates.

Miles, R. N.↗
NASA NTRS1993

X-ray evidence for particulate contamination on the AXAF VETA-1 mirrors

X-ray testing of the AXAF outer mirror pairs, in the VETA-1 configuration, reveals a point spread function (PSF) with unexpectedly large wings at low energies. Although the angular dependence in the wings of the PSF is close to that expected for diffractive scattering from surface roughness, the energy dependence differs substantially. Analyses of the observed X-ray PSF, images near ring focus, and single-quadrant images at conjugate focus suggest that the excess scattering observed at low X-ray energies results from diffractive scattering by relatively small grains (as small as a few tenths micrometer in radius). We develop a simple model for the contribution of scattering by particulates to the PSF. Merging this model with that for scattering by surface roughness, we fit the combined model to the observed energy-dependent PSF, in order to estimate parameters and associated uncertainties characterizing the grain-size distribution and the surface-roughness power spectral density. In particular, we find that the fractional coverage of the mirrors by particulates is approximately 1 x 10 exp -4 (for grain radii between 0.1 and 10 microns), and that the rms surface-roughness is approximately 0.7 nm (for spatial frequencies between 1/mm and 1000/mm).

O'Dell, S. L.↗
NASA NTRS1993

Anomaly detection of turbopump vibration in Space Shuttle Main Engine using statistics and neural networks

The statistical and neural networks methods have been applied to investigate the feasibility in detecting anomalies in turbopump vibration of SSME. The anomalies are detected based on the amplitude of peaks of fundamental and harmonic frequencies in the power spectral density. These data are reduced to the proper format from sensor data measured by strain gauges and accelerometers. Both methods are feasible to detect the vibration anomalies. The statistical method requires sufficient data points to establish a reasonable statistical distribution data bank. This method is applicable for on-line operation. The neural networks method also needs to have enough data basis to train the neural networks. The testing procedure can be utilized at any time so long as the characteristics of components remain unchanged.

Lo, C. F.↗