Search NASA⌕ Search

SEARCH · Search NASA

Results for “RESINS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Infusible acrylic thermoplastic resins: Tailoring of chemorheological properties

Infusible liquid resins that polymerize into a thermoplastic are desirable for many applications. Similar to unsaturated and vinylester thermosetting systems, they consist of polymers dissolved in reactive monomer. This work presents a method to decrease cycle time by tuning the molecular weight and concentration of the predissolved polymer in the resin. Variation of these properties allows precise control of the viscosity which in turn controls the time at which peak exotherm is reached, the maximum temperature for a given part thickness, and cure time. In this work, predictive models for the viscosity dependence on molecular weight, polymer concentration, shear rate, and temperature are developed. Two fiberglass panels are fabricated and tested; one with a lower molecular weight ($M_w$~30 kg mol –1 ) poly(methyl methacrylate) dissolved in methyl methacrylate and the second with higher molecular weight ($M_w$~500 kg mol –1 ) predissolved polymer in the resin. Mechanical properties are indistinguishable but the lower molecular weight panel cures up to three times faster.

36 MATERIALS SCIENCE↗

Defining the mechanistic binding of viral particles to a multi‐modal anion exchange resin

A multi‐tiered approach to determine the binding mechanism of viral clearance utilizing a multi‐modal anion exchange resin was applied to a panel of four viral species that are typically used in validating viral clearance studies (i.e., X‐MuLV, MVM, REO3, and PrV). First, virus spiked buffer‐only experiments were conducted to evaluate the virus's affinity for single mode and multi‐modal chromatography resins under different buffer conditions in a chromatography column setting. From these results we hypothesize that the mechanisms of binding of the viruses involve binding to both the hydrophobic and anionic functional groups. This mechanistic view agreed with the general surface characteristics of the different virus species in terms of isoelectric point and relative hydrophobicity values. This hypothesized mechanistic binding was then tested with commercially relevant, in‐process materials, in which competitive binding occurred between the load components (e.g., viruses, target product, and impurities) and the resin. © 2018 American Institute of Chemical Engineers Biotechnol. Prog. , 34:1019–1026, 2018

Brown, Matthew R.↗

Extraction and separation of rare earth elements using LN resins in hydrochloric acid

The separation of the rare earth elements is essential for numerous scientific applications but remains a significant challenge due to the nearly identical chemical properties of the adjacent lanthanide elements. Eichrom’s LN series of extraction chromatographic resins feature organophosphorus extractants and are widely used to achieve adjacent lanthanide separations. While extensive characterization of these resins has been completed for nitric acid matrices, the use of hydrochloric acid is preferred for a variety of applications. Further, the extraction of the rare earth elements, La–Lu and Y, has been characterized on LN and LN2 resins in hydrochloric acid via batch uptake and column chromatographic studies.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Evaluation of hydroxamate-based resins towards a more clinically viable 44 Ti/ 44 Sc radionuclide generator

For this research, several hydroxamate-based resins were synthesized and tested for use in 44 Ti/ 44 Sc generator systems in small scale experiments (740 kBq 44 Ti). The most promising resin was tested further in larger scale generator studies (37 MBq). This resin displayed impressive retention of 44 Ti over several elutions, and high quantities of 44 Sc were obtained in small volumes of dilute HCl eluents. Initial radiolabeling experiments were conducted and demonstrated the possibility of direct radiolabeling of the generator produced 44 Sc with DOTA.

07 ISOTOPE AND RADIATION SOURCES↗

Simulated lightning strike investigation of CFRP comprising a novel Polyaniline/Phenol based electrically conductive resin matrix

Traditional carbon fiber reinforced plastics (CFRPs) have been reported to exhibit lower electrical conductivity in the through-thickness direction, and have since paved the path for developing new resin systems to improve the through-thickness electrical conductivity and functionality of CFRP laminates. This work designs and investigates a novel Polyaniline (PANI)/Phenol resin, which possesses high electrical conductivity and mechanical strength. The CFRP manufactured by this PANI/Phenol resin with an addition of up to (~23.30%) phenol resulted in 0.6 S/cm through-thickness conductivity and demonstrated flexural strength and modulus values of 477 MPa and 59.2 GPa, respectively. We further evaluate the effectiveness of lightning strike protection of PANI/Phenol-based conductive CFRP laminates with a simulated lightning strike test. In essence, this research reports on PANI/Phenol-based CFRP's effectiveness as a material for lightning suppression without applying traditional metal-based lightning strike protection (LSP) systems.

36 MATERIALS SCIENCE↗

Nanostructured gadolinium-doped ceria microsphere synthesis from ion exchange resin: Multi-scale in-situ studies of solid solution formation

In the current nano-sized material revolution, the main limitations to a large-scale deployment of nanomaterials involve health concerns related to nano-dissemination via air. Developing new chemical routes benefiting from nano-size advantages while avoiding their hazards could overcome these limitations. Addressing this need, a chemical route leading to soft nano-particle agglomerates, i.e., macroscopic precursors presenting the ability to be decomposed into nano-sized materials, was developed and applied to Ce{sub 0.8}Gd{sub 0.2}O{sub 2−δ}. Using cerium/gadolinium-loaded ion exchange resin, the Ce{sub 0.8}Gd{sub 0.2}O{sub 2−δ} solid solution formation as a function of temperature was studied in-situ through X-ray diffraction, X-ray absorption spectroscopy and Raman spectroscopy. Temperatures corresponding to the organic skeleton decomposition and to the mixed oxide crystallization were identified. An optimal heat treatment, leading to nanostructured soft agglomerates, was established. Microsphere processing capabilities were evaluated and particle size distribution measurements were recorded. A very low fracture strength was calculated, and a nanometric particle size distribution (170 nm) was determined. - Graphical abstract: The elaboration of micro-spherical precursors leading to the formation of nano-oxide soft agglomerates was studied and approved through the use of ion exchange resin loaded with cerium and gadolinium. The formation of the solid solution was followed through in-situ measurements such as XAS, XRD, Raman, TGA and DSC. Key temperatures were identified for the formation of the mixed-oxide. Following this study, the microstructure and particle size of oxide microspheres formed highlight the formation of soft nano-arrangments. - Highlights: • Soft microspherical agglomerates able to be decomposed into nano-sized materials. • In situ study of cerium/gadolinium-loaded ion exchange resin conversion in oxide. • In situ multi-scale study through Raman spectroscopy, XAS and HT-XRD. • Monodisperse nanometric particle synthesis suitable for ceramic processing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Techno-Economic Analysis of a Megawatt-Scale Thermoplastic Resin Wind Turbine Blade

Two-part, in-situ reactive thermoplastic resin systems for composite wind turbine blades have the potential to lower the blade cost by decreasing cycle times, capital costs of both tooling and equipment, and energy consumption during manufacturing, and enabling recycling at the end of the blade life. This paper describes a techno-economic model used to estimate the cost of a thermoplastic wind turbine blade relative to a baseline thermoset epoxy blade. It was shown that a 61.5-m thermoplastic blade costs 4.7% less than an equivalent epoxy blade. Even though the thermoplastic resin is currently more expensive than epoxy, this cost reduction is primarily driven by the decreased capital costs, faster cycle times, and reduced energy requirements and labor costs. Although thermoplastic technology for resin infusion of wind turbine blades is relatively new, these results suggest that it is economically and technically feasible and warrants further research.

17 WIND ENERGY↗

Scaling Trivalent Actinide and Lanthanide Recovery by Diglycolamide Resin from Savannah River Site’s Mark-18A Targets

The Savannah River National Laboratory is implementing a separation flowsheet to recover rare isotopes and transplutonium elements from irradiated 242 Pu targets known as Mark-18A targets. The Mark-18A targets contain the United States’ supply of nonseparated 244 Pu, which has a wide range of applications from nuclear forensics to production of superheavy elements such as flerovium. The targets also contain hundreds of grams of heavy curium ( 246–248 Cm), which is used as a target material for 252 Cf production. This work investigates the use of diglycolomide resin (DGA Resin) to recover valuable trivalent actinides from the Mark-18A targets. Batch contact experiments were performed on a representative simulant to determine mass loadings. Furthermore, the resin showed an overall capacity of 11 mg/mL for a mixed metal matrix (Zr and La–Gd). Column experiments showed chromatographic separation with transition-metal breakthroughs occurring first followed by the lanthanide series La–Gd. The experiments showed that lanthanide breakthrough occurred after 11 mg/mL mass loading was reached on the column with the mixed metal matrix. A radiological column experiment with an in-line UV/vis cell was able to detect Nd breakthrough just prior to 241 Am breakthrough. Implementing an in-line UV/vis cell into full-scale Mark-18A target processing will be used to limit breakthrough of trivalent actinides recovered from the targets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Downstream Separation of Formic Acid with Anion-Exchange Resin from Electrocatalytic Carbon Dioxide (CO 2 ) Conversion: Adsorption, Kinetics, and Equilibrium Modeling

The electrocatalytic carbon dioxide reduction reaction (CO 2 RR) that produces liquid formic acid (FA) is one potential route to minimize the CO 2 concentration in the atmosphere by utilizing CO 2 as a feedstock. However, one of the main disadvantages of this route is the high energy demand required for purification through conventional distillation. This method of purification has been shown to result in a large carbon footprint in life-cycle analysis (LCA). Therefore, finding an alternative purification technique that can integrate with an electrochemical CO 2 RR process with the potential to lower the carbon footprint would be of great interest. Under the experimental conditions of the CO 2 RR, FA remains in its basic form as the formate anion in the catholyte. Anion exchange resins with their basic properties can separate the formate anion from the catholyte mixture as an alternative to energy intensive distillation. In this work, three anion exchange resins with increasing basicity order: Amberlite IRA-96 < Amberlite IRA-910 < Ambersep 900 are tested to separate FA in the presence of aqueous solution of potassium bicarbonate catholyte with varying levels of resin and FA. Kinetics and equilibrium studies data for the FA adsorption are interpreted using several kinetics and isotherm models. The kinetics data fit well with a pseudo-first-order model at high initial FA concentrations and a pseudo-second-order model at low initial FA concentrations. The experimental data can be best explained with the Freundlich isotherm model. The fitted results show that strongly basic Ambersep 900 is more effective at separating FA, with a maximum adsorption capacity of 336.7 mg/g compared to Amberlite IRA-96 (275.2 mg/g) and Amberlite IRA-910 (209.2 mg/g) in neutral water. However, weakly basic Amberlite IRA-96 (110.8 mg/g) can separate FA more efficiently from potassium bicarbonate catholyte than Amberlite IRA-910 (99.9 mg/g) and Ambersep 900 (40.0 mg/g). As a result, competitive adsorption occurs in the presence of potassium bicarbonate catholyte, but the formic acid adsorption capacity is still sufficient for adequate separation.

20 FOSSIL-FUELED POWER PLANTS↗

Predicting the Macroscopic Fracture Energy of Epoxy Resins from Atomistic Molecular Simulations

Predicting the macroscopic fracture energy of highly crosslinked glassy polymers from atomistic simulations is challenging due to the size of the process zone being large in these systems. Here, we present a scale-bridging approach that links atomistic molecular dynamics simulations to macroscopic fracture properties on the basis of a continuum fracture mechanics model for two different epoxy materials. Our approach reveals that the fracture energy of epoxy resins strongly depends on the functionality of epoxy resin and the component ratio between the curing agent (amine) and epoxide. The most intriguing part of our study is that we demonstrate that the fracture energy exhibits a maximum value within the range of conversion degrees considered (from 65% to 95%), which can be attributed to the combined effects of structural rigidity and post-yield deformability. Our study provides physical insight into the molecular mechanisms that govern the fracture characteristics of epoxy resins and demonstrates the success of utilizing atomistic molecular simulations towards predicting macroscopic material properties.

42 ENGINEERING↗

Mapping Structure and Rheology of pH-Responsive Resins for Low-VOC Coatings

In recent years, the paint and coatings industry has shifted away from traditional resin formulations that require high concentrations of volatile organic compounds (VOCs) to achieve the desired rheological performance and sustainability targets. One approach to eliminate or reduce VOCs in paint and coating formulations while maintaining the final performance is to disperse stimuli-responsive polymer latex particles in water. The chemistry and architecture of these particles have been engineered such that the suspension rheology changes in response to the pH changes. The particles can also be swollen with organic solvents to illicit similar rheological changes. To understand how the particle microstructure influences the observed macroscopic properties, we use small-angle neutron scattering and dynamic light scattering to determine that these particles consist of a cross-linked core with long polymer tails that extend into the dispersing medium. Carboxylic acid groups present on the tails deprotonate with increasing pH, and the extension of the polymer chain due to charge repulsion increases the hydrodynamic drag on the particle. Here we find that adjusting the pH alone has a much more significant effect on the shear dependence of the viscosity of the studied resin than adding organic solvent alone. We also find that this resin architecture is more responsive per mole of pH-responsive group than other architectures of pH-responsive latex particles in the literature.

36 MATERIALS SCIENCE↗

Phenolic Resin Derived Hard Carbon Anode for Sodium-Ion Batteries: A Review

Sodium-ion batteries are complementary to lithium-ion batteries for grid-scale energy storage applications due to lower cost, safety, and potential for sustainable supply chains. The past decade has witnessed enormous research efforts in developing hard carbon anode materials for sodium-ion batteries. Phenolic resins have received significant attention as hard carbon precursors due to their high carbon yield, highly cross-linked structure, low cost, mature technology, and excellent electrochemical performance of corresponding hard carbon anode. This Review exclusively highlights the state-of-the-art preparation of hard carbon from phenolic resins, and the electrochemical performance in sodium-ion batteries. Cross-linked resins are prepared from three phenolic monomers (phenol, resorcinol, and phloroglucinol) to produce hard carbon. The effects of carbonization temperature on the microstructure, and electrochemical properties of hard carbon have been summarized here. Hard carbon formation, and sodium storage mechanisms have been briefly outlined. Finally, this Review provides an industrial perspective on hard carbon production at scale.

aromatic compounds↗

Enhancing Resource Recovery through Electro-Assisted Regeneration of an Ammonia-Selective Cation Exchange Resin

Ammonia-selective adsorbents can manage reactive nitrogen in the environment and promote a circular nutrient economy. Weak acid cation exchangers loaded with zinc exhibit high ammonia selectivity but face two implementation barriers: the stability of the zinc–carboxylate bond in complex wastewaters and energy- and logistics-intensive adsorbent regeneration with acidic solutions. In this paper, we examined the stability of zinc–carboxylate bonds in varying solutions (pure ammonium solution, synthetic urine, and real urine) and during electro-assisted regeneration. For electrochemical regeneration, both electrolyte concentration and current density influenced the trade-off between ammonia regeneration and zinc elution. Using 10 mM K 2 SO 4 anolyte at a 0.08 mA/cm 2 current density, we achieved 4% zinc elution and 61% ammonia regeneration. In contrast, using 100 mM K 2 SO 4 at 4.96 mA/cm 2 improved the regeneration efficiency to 97% but eluted 60% of zinc. We found that electrolyte concentration was the key factor influencing the regeneration efficiency of the NH 3 -selective adsorbents. Due to prevalent zinc elution, we designed an in situ procedure for reforming the zinc–carboxylate bond and achieved similar adsorption densities between pre- and post-regenerated resins, thus enabling multiple cycle resin use. Ultimately, this study advances understanding of ammonia-selective resins that can facilitate high-purity, selective, and durable recovery of nutrients from waste streams.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Mechanism-Based Reaction–Diffusion Model for Accelerated Discovery of Thermoset Resins Frontally Polymerized by Olefin Metathesis

Frontal ring-opening metathesis polymerization (FROMP) involves a self-perpetuating exothermic reaction, which enables the rapid and energy-efficient manufacturing of thermoset polymers and composites. Current state-of-the-art reaction–diffusion FROMP models rely on a phenomenological description of the olefin metathesis kinetics, limiting their ability to model the governing thermo-chemical FROMP processes. Furthermore, the existing models are unable to predict the variations in FROMP kinetics with changes in the resin composition and as a result are of limited utility toward accelerated discovery of new resin formulations. In this work, we formulate a chemically meaningful model grounded in the established mechanism of ring-opening metathesis polymerization (ROMP). Our study aims to validate the hypothesis that the ROMP mechanism, applicable to monomer-initiator solutions below 100 °C, remains valid under the nonideal conditions encountered in FROMP, including ambient to >200 °C temperatures, sharp temperature gradients, and neat monomer environments. Through extensive simulations, we demonstrate that our mechanism-based model accurately predicts the FROMP behavior across various resin compositions, including polymerization front velocities and thermal characteristics (e.g., T max ). Additionally, we introduce a semi-inverse workflow that predicts FROMP behavior from a single experimental data point. Notably, the physiochemical parameters utilized in our model can be obtained through DFT calculations and minimal experiments, highlighting the model’s potential for rapid screening of new FROMP chemistries in pursuit of thermoset polymers with superior thermo-chemo-mechanical properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The influence of different dispersion methods on the size of the aggregate of CNTs in epoxy resin for the manufacturing of carbon fiber reinforced composites

Different industrial mixing methods and some of their combinations (1) ultrasound; (2) stirring; (3) (4) by roller machine, (5) by gears machine (6) Ultrasound radiation + high stirring were investigated for incorporating Multi walled Carbon nanotubes (MWCNT) into a resin based on an aeronautical epoxy precursor, cured with 4,4′ diamine-dibenzylsulfone (DDS). The effect of different parameters, ultrasound intensity, number of cycles, type of blade, gears speed on the nanofiller dispersion were analyzed. The inclusion of the nanofiller in the resin causes a drastic increase in the viscosity, preventing the homogenization of the resin and a drastic increase in temperature in the zones closest to the ultrasound probe. To overcome these challenges, the application of high speed agitation simultaneously with the application of ultrasonic radiation was used. This allows on the one hand a homogeneous dispersion, on the other hand an improvement of the dissipation of heat generated by ultrasonic radiation. A comprehensive study with parameters like viscosity and temperature was performed. It is necessary a balance between viscosity and temperature. Viscosity must be low enough to facilitate the dispersion and homogenization of the nanofillers, whereas the temperature cannot be too high because of re-agglomerations.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Discovering candidate genes that regulate resin canal number in Pinus taeda stems by integrating genetic analysis across environments, ages, and populations

Genetically improving constitutive resin canal development in Pinus stems may enhance the capacity to synthesize terpenes for bark beetle resistance, chemical feedstocks, and biofuels. To discover genes that potentially regulate axial resin canal number (RCN), single nucleotide polymorphisms (SNPs) in 4027 genes were tested for association with RCN in two growth rings and three environments in a complex pedigree of 520 Pinus taeda individuals (CCLONES). The map locations of associated genes were compared with RCN quantitative trait loci (QTLs) in a (P.taedaxPinuselliottii)xP.elliottii pseudo-backcross of 345 full-sibs (BC1). Resin canal number was heritable (h(2)0.12-0.21) and positively genetically correlated with xylem growth (r(g)0.32-0.72) and oleoresin flow (r(g)0.15-0.51). Sixteen well-supported candidate regulators of RCN were discovered in CCLONES, including genes associated across sites and ages, unidirectionally associated with oleoresin flow and xylem growth, and mapped to RCN QTLs in BC1. Breeding is predicted to increase RCN 11% in one generation and could be accelerated with genomic selection at accuracies of 0.45-0.52 across environments. There is significant genetic variation for RCN in loblolly pine, which can be exploited in breeding for elevated terpene content.

Westbrook, JW↗

Ion Exchange Distribution Coefficient Tests and Computer Modeling at High Ionic Strength Supporting Technetium Removal Resin Maturation

The primary treatment of the tank waste at the DOE Hanford site will be done in the Waste Treatment and Immobilization Plant (WTP) that is currently under construction. The baseline plan for this facility is to treat the waste, splitting it into High Level Waste (HLW) and Low Activity Waste (LAW). Both waste streams are then separately vitrified as glass and poured into canisters for disposition. The LAW glass will be disposed onsite in the Integrated Disposal Facility (IDF). There are currently no plans to treat the waste to remove technetium, so its disposition path is the LAW glass. Due to the water solubility properties of pertechnetate and long half-life of 99 Tc, effective management of 99 Tc is important to the overall success of the Hanford River Protection Project mission. To achieve the full target WTP throughput, additional LAW immobilization capacity is needed, and options are being explored to immobilize the supplemental LAW portion of the tank waste. Removal of 99 Tc, followed by off-site disposal, would eliminate a key risk contributor for the IDF Performance Assessment (PA) for supplemental waste forms, and has potential to reduce treatment and disposal costs. Washington River Protection Solutions (WRPS) is developing some conceptual flow sheets for supplemental LAW treatment and disposal that could benefit from technetium removal. One of these flowsheets will specifically examine removing 99 Tc from the LAW feed stream to supplemental immobilization. To enable an informed decision regarding the viability of technetium removal, further maturation of available technologies is being performed. This report contains results of experimental ion exchange distribution coefficient testing and computer modeling using the resin SuperLig ® 639 a to selectively remove perrhenate from high ionic strength simulated LAW. It is advantageous to operate at higher concentration in order to treat the waste stream without dilution and to minimize the volume of the final wasteform. This work examined the impact of high ionic strength, high density, and high viscosity if higher concentration LAW feed solution is used. Perrhenate (ReO 4 - ) has been shown to be a good nonradioactive surrogate for pertechnetate in laboratory testing for this ion exchange resin, and the performance bias is well established. Equilibrium contact testing with 7.8 M [Na + ] average simulant concentrations indicated that the SuperLig ® 639 resin average perrhenate distribution coefficient was 368 mL/g at a 100:1 phase ratio. Although this indicates good performance at high ionic strength, an equilibrium test cannot examine the impact of liquid viscosity, which impacts the diffusivity of ions and therefore the loading kinetics. To get an understanding of the effect of diffusivity, modeling was performed, which will be followed up with column tests in the future.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Unreviewed Disposal Question Evaluation: Disposal of the Oak Ridge National Laboratory High Flux Isotope Reactor Resin at the Area 5 Radioactive Waste Management Site, Nevada National Security Site, Nye County, Nevada

This Unreviewed Disposal Question Evaluation assesses whether the Oak Ridge National Laboratory (ORNL) High Flux Isotope Reactor (HFIR) Resin is suitable for shallow land burial at the Area 5 Radioactive Waste Management Site on the Nevada National Security Site. Disposal of the ORNL HFIR Resin meets all DOE M 435.1-1 performance objectives. The ORNL HFIR Resin waste stream is recommended for acceptance without conditions.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗