SEARCH · Search NASA

Results for “RESTRAINT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

All sources NASA NTRS DOE OSTI

NASA NTRS1974

Geometrically constrained observability

This paper deals with observed processes in situations in which observations are available only when the state vector lies in certain regions. For linear autonomous observed processes, necessary and sufficient conditions are obtained for half-space observation regions. These results are shown to contain a theorem dual to a controllability result proved by the author for a linear autonomous control system whose control restraint set does not contain the origin as an interior point. Observability results relating to continuous observation systems and sampled data systems are presented, and an example of observing the state of an electrical network is given.

Brammer, R. F.↗

NASA NTRS1974

Orbital flux integrations: Parameter values for effective computer time reductions

To improve computer utilization and to reduce the cost of orbital flux integrations, the effects of integration parameters 'duration' (T) and 'stepsize' (delta t) on integration results were investigated. Over given ranges of T and delta t, and within specified acceptable accuracy restraints, optimal values of these parameters were established for circular subsynchronous trajectories, in terms of the variables altitude (H) and inclination (i). It is shown that (1) above a certain statistically important value, duration is independent of both h and i; (2) stepsize has a relative altitude dependence; and (3) stepsize is not a function of inclination. The substantial savings in computer time are discussed along with the possibility of greater savings by relaxing accuracy restrictions while not exceeding the minimum model-associated uncertainty factors of the environments.

Stassinopoulos, E. G.↗

NASA NTRS1974

Earth Resources Technology Satellite Operations Control Center (OCC). ERTS-B flight activation plan

Included in this plan are general objectives through Day 7, operational guidelines and restraints. Following the activation of all subsystems (through Day 3), special series of payload operations were performed to obtain data samples for the different combinations of exposure/gain settings. This took place from Day 4 through Day 7. The Orbit Adjust was employed to perform vernier corrections after the orbit had been defined. The orbit data was collected through Day 3, with the corrections being made from Day 4 through Day 7. ERTS command auxiliary memory (ECAM) was turned on in Day 3 and the memory dumped to a narrow band tape recorder. A verification of memory was done in the off line mode. ECAM was not used in a payload support mode until Day 7.

Source record↗

NASA NTRS1975

Ballistic intercept missions to Comet Encke

The optimum ballistic intercept of a spacecraft with the comet Encke is determined. The following factors are considered in the analysis: energy requirements, encounter conditions, targeting error, comet activity, spacecraft engineering requirements and restraints, communications, and scientific return of the mission. A baseline model is formulated which includes the basic elements necessary to estimate the scientific return for the different missions considered. Tradeoffs which have major impact on the cost and/or scientific return of a ballistic mission to comet Encke are identified and discussed. Recommendations are included.

Mumma, M.↗

NASA NTRS1975

NASTRAN nonlinear vibration analysis of beam and frame structures

A capability for the nonlinear vibration analysis of beam and frame structures suitable for use with NASTRAN level 15.5 is described. The nonlinearity considered is due to the presence of axial loads induced by longitudinal end restraints and lateral displacements that are large compared to the beam height. A brief discussion is included of the mathematical analysis and the geometrical stiffness matrix for a prismatic beam (BAR) element. Also included are a brief discussion of the equivalent linearization iterative process used to determine the nonlinear frequency, the required modifications to subroutines DBAR and XMPLBD of the NASTRAN code, and the appropriate vibration capability, four example problems are presented. Comparisons with existing experimental and analytical results show that excellent accuracy is achieved with NASTRAN in all cases.

Mei, C.↗

NASA NTRS1974

The NASA Ames integral aircraft passenger seat concept - A human engineering approach

A new NASA Ames concept for an aircraft passenger seat has been under research and development since 1968. It includes many human-factor features that will provide protection to the passenger from vibration, jostle, and high impact. It is comfortable and safer than any of the seats presently in use. An in-depth design, fabrication, and impact analysis was conducted in order to design a seat that will maximize passenger protection in high g impacts (20 g horizontal -Gx, 36 g vertical +Gz, 16 g lateral Gy). The method for absorbing impact energy was accomplished with a combination of stretching stainless steel cables, thread breaking of stitches, hydraulic mechanism and the special Temper Form cushions. The restraint system for the seat consisted of a lap belt and shoulder harness inertia reel combination.

Kubokawa, C. C.↗

NASA NTRS1974

Science considerations for an orbital radar mapping mission to Venus

A radar mapping mission to Venus is under consideration by NASA for the 1980s. The science objectives of the mission are to determine the geologic history of the planet; map the major topographic features and provide limited detailed geologic and terrain analysis of potential probe landing sites. Because of the thick Venusian atmosphere, a synthetic-aperture side-looking radar system has been selected as the most practical remote sensing instruments to use. Topographic data are the most useful for achieving the science goals of the mission. The radar system variables and mission parameters must be specified to maximize topographic data returns while being compatible with engineering and cost restraints. A baseline imaging resolution of 100 meters, with ability to obtain some higher-resolution coverage, is acceptable. Total planet coverage is desirable but the primary science objectives can be achieved if at least one entire hemisphere is imaged.

Wychgram, D. C.↗

NASA NTRS1975

Skylab task and work performance /Experiment M-151 - Time and motion study/

The primary objective of Experiment M151 was to study the inflight adaptation of Skylab crewmen to a variety of task situations involving different types of activity. A parallel objective was to examine astronaut inflight performance for any behavioral stress effects associated with the working and living conditions of the Skylab environment. Training data provided the basis for comparison of preflight and inflight performance. Efficiency was evaluated through the adaptation function, namely, the relation of performance time over task trials. The results indicate that the initial changeover from preflight to inflight was accompanied by a substantial increase in performance time for most work and task activities. Equally important was the finding that crewmen adjusted rapidly to the weightless environment and became proficient in developing techniques with which to optimize task performance. By the end of the second inflight trial, most of the activities were performed almost as efficiently as on the last preflight trial. The analysis demonstrated the sensitivity of the adaptation function to differences in task and hardware configurations. The function was found to be more regular and less variable inflight than preflight. Translation and control of masses were accomplished easily and efficiently through the rapid development of the arms and legs as subtle guidance and restraint systems.

Kubis, J. F.↗

NASA NTRS1976

Kinematic stability of roller pairs in free rolling contact

A set of generalized stability equations was developed for roller pairs in free rolling contact. A symmetric, dual contact model was used. Four possible external contact profiles that possess continuous contacting surfaces were studied. It was found that kinematic stability would be insured if the larger radius of transverse curvature, in absolute value, and the smaller rolling radius both exist on the roller that has the apex of its conical surface outboard of its main body. The stability criteria developed are considered to be useful for assessing axial restraint requirements for a variety of roller mechanisms and in the selection of roller contact geometry for traction drive devices.

Savage, M.↗

NASA NTRS1976

The physiology and biochemistry of total body immobilization in animals: A compendium of research

Major studies that describe the physiological and biochemical mechanisms which operate during total body restraint (confinement in cages for example) are presented. The metabolism and behavior of various animals used in medical research (dogs, monkeys, rats, fowl) was investigated and wherever possible a detailed annotation for each study is provided under the subheadings: (a) purposes, (b) procedures and methods, (c) results, and (d) conclusions. Selected references are also included.

Dorchak, K. J.↗

NASA NTRS1976

Application of shuttle EVA systems to payloads. Volume 1: EVA systems and operational modes description

Descriptions of the EVA system baselined for the space shuttle program were provided, as well as a compendium of data on available EVA operational modes for payload and orbiter servicing. Operational concepts and techniques to accomplish representative EVA payload tasks are proposed. Some of the subjects discussed include: extravehicular mobility unit, remote manipulator system, airlock, EVA translation aids, restraints, workstations, tools and support equipment.

Source record↗

NASA NTRS1975

Measurement of residual strains in boron-epoxy and glass-epoxy laminates

Embedded-strain-gage techniques were developed and used for measuring strains in composite angle-ply laminates during curing and thermal cycling. The specimens were 2.54 by 22.9 cm eight-ply boron-epoxy and S-glass-epoxy laminates. Unidirectional specimens were used for control purposes. Strain readings were corrected for the purely thermal output of the gages obtained from an instrument quartz reference specimen. The strains measured during the cooling part of the curing cycle were in agreement with those recorded during subsequent thermal cycling, indicating that residual stresses induced during curing are primarily caused by differential thermal expansions of the various plies. Restraint strains were computed for the 0-deg and 45-deg plies of the angle-ply laminates tested, and the residual stresses obtained using the anisotropic constitutive relations and taking into account the temperature dependence of stiffnesses and strains.

Daniel, I. M.↗

NASA NTRS1976

Kitt Peak 60-cm vacuum telescope

A major new solar-research telescope conceived and built during a time of budget restraint is described. The observation of magnetic and velocity (circulation) field structure on a synoptic basis and with diffraction-limited resolution is the aim. New optical features include the use of oversize mirrors and windows to avoid thermal edge effects and the placement of the coelostat feed outside the vacuum, mainly for economy. The site selected has prevailing winds that clear thermals from these mirrors. Test data in the form of the system MTF and optical transmission, together with examples of full disk magnetograms and photoheliograms, show present performance capability. Measured MTF indicates a response of 0.2 at 1 sec of arc (whereas diffraction-limited response would be about 0.8). System transmission, including the accompanying spectrograph, is only 2-3% (wavelength 0.44-1.1 microns). Thus, both the optical quality and efficiency are subject to improvement.

Livingston, W. C.↗

NASA NTRS1975

Simulation of aircraft crash and its validation

A joint FAA/NASA program is discussed which is aimed at developing a reliable technology for the design of crashworthy light aircraft. This program encompasses the development of analytical methods, the definition of a survivable crash envelope, and the design of improved seat and restraint systems. A facility for full-scale crash-simulation testing is described along with the test method and results of five full-scale crash tests of twin-engine light aircraft. The major goals of the analytical portion of the program are outlined, including the development and validation of the analytical technique using simplified structural specimens that approximate aircraft components, as well as the mathematical modeling of the complete airframe and its subsequent dynamic analysis by substructuring and matrix reduction techniques.

Alfaro-Bou, E.↗

NASA NTRS1976

A Z-axis recumbent rotating device for use in parabolic flight

A prototype apparatus for exposing persons to rotation about their Z-axis in parabolic flight is described. Although it resembles earth-horizontal axis devices, added features are its strength and portability, and the fiber glass 'couch' with adjustable elements providing support and restraint. Even under ground-based conditions, this device provides unique opportunities for investigations involving not only canalicular and macular mechanoreceptors, but also touch, pressure, and kinesthetic receptor systems.

Graybiel, A.↗

NASA NTRS1975

Some characteristics of the international space channel

Some physical characteristics of radio transmission links and the technology of PCM modulation combine with the Radio Regulations of the International Telecommunications Union to define a communications channel having a determinable channel capacity, error rate, and sensitivity to interference. These characteristics and the corresponding limitations on EIRP, power flux density, and power spectral density for space service applications are described. The ITU regulations create a critical height of 1027 km where some parameters of the limitation rules change. The nature of restraints on power spectral density are discussed and an approach to a standardized representation of Necessary Bandwidth for the Space Services is described. It is shown that, given the PFD (power flux density) and PSD (power spectral density) limitations of radio regulations, the channel performance is determined by the ratio of effective receiving antenna aperture to system noise temperature. Based on this approach, the method for a quantitative trade-off between spectrum spreading and system performance is presented. Finally, the effects of radio frequency interference between standard systems is analyzed.

Noack, T. L.↗

NASA NTRS1977

Magnetic rotary switch

Innovation uses solid-state Hall-effect sensor to turn electrical circuit on or off. Though normally held off by a small bias magnet, Hall device turns on when strong actuating magnet comes into proximity. Drive magnet moves actuating magnet against restraint of detent magnet.

Sarkinen, J. K.↗

NASA NTRS1976

Stress intensity at a crack between bonded dissimilar materials

The contour integral method is extended to general boundary value problems involving imperfect bonding of dissimilar materials. The loading and restraints are shown to have a significant effect on the stress intensity. Example problems are presented to illustrate the results.

Stern, M.↗