Heat-rejection radiator mass and its influence in space power systems
Heat rejection radiator influence on space nuclear power system as function of mass/area for Brayton, Rankine, thermoelectric and thermionic conversion schemes
Bonneville, J. M.↗
SEARCH · Search NASA
Results for “Rankine”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A computer simulation for nuclear space power systems in preliminary system and mission analysis
Nuclear space power systems computer simulation for preliminary system and mission analysis, considering Brayton, Rankine and thermionic systems
Schaupp, R. W.↗
Design changes in SNAP-8 for reduced reactor operating temperatures
SNAP-8 mercury Rankine system performance data, investigating design change for reduced reactor operating temperatures
Thur, G. M.↗
Single spacecraft method of estimating shock normals
Shock normal calculation by applying least squares technique to combined geomagnetic field and plasma data from single satellite, assuming Rankine-Hugoniot conservation relations
Argentiero, P. D.↗
Advanced high-temperature electromagnetic pump
Three phase helical, electromagnetic induction pump for use as boiler feed pump in potassium Rankine-cycle power system is described. Techniques for fabricating components of pump are discussed. Specifications of pump are analyzed.
Gahan, J. W.↗
Study of a heat rejection system using capillary pumping
Results of an analytical study investigating the application of capillary pumping to the heat rejection loop of an advanced Rankine cycle power conversion system are presented. The feasibility of the concept of capillary pumping as an alternate to electromagnetic pumping is analytically demonstrated. Capillary pumping is shown to provide a potential for weight and electrical power saving and reliability through the use of redundant systems. A screen wick pump design with arterial feed lines was analytically developed. Advantages of this design are high thermodynamic and hydrodynamic efficiency, which provide a lightweight easily packaged system. Operational problems were identified which must be solved for successful application of capillary pumping. The most important are the development of start up and shutdown procedures, and development of a means of keeping noncondensibles from the system and of earth-bound testing procedures.
Neal, L. G.↗
SNAP-8 electrical generating system development program
The SNAP-8 program has developed the technology base for one class of multikilowatt dynamic space power systems. Electrical power is generated by a turbine-alternator in a mercury Rankine-cycle loop to which heat is transferred and removed by means of sodium-potassium eutectic alloy subsystems. Final system overall criteria include a five-year operating life, restartability, man rating, and deliverable power in the 90 kWe range. The basic technology was demonstrated by more than 400,000 hours of major component endurance testing and numerous startup and shutdown cycles. A test system, comprised of developed components, delivered up to 35 kWe for a period exceeding 12,000 hours. The SNAP-8 system baseline is considered to have achieved a level of technology suitable for final application development for long-term multikilowatt space missions.
Source record↗
SNAP-8 electrical generating system development program
The SNAP-8 program has developed the technology base for one class of multikilowatt dynamic space power systems. Electrical power is generated by a turbine-alternator in a mercury Rankine-cycle loop to which heat is transferred and removed by means of sodium-potassium eutectic alloy subsystems. Final system overall criteria include a five-year operating life, restartability, man rating, and deliverable power in the 90 kWe range. The basic technology has been demonstrated by more than 400,000 hours of major component endurance testing and numerous startup and shutdown cycles. A test system, comprised of developed components, delivered up to 35 kWe for a period exceeding 12,000 hours. The SNAP-8 system baseline is considered to have achieved a level of technology suitable for final application development for long-term multikilowatt space missions.
Source record↗
Fabrication and test of a space power boiler feed electromagnetic pump. Part 2: Test facility and performance test
A three-phase helical induction electromagnetic pump, designed for the boiler-feed pump of a potassium Rankine-cycle space power system, was built and tested. The pump was tested over a range of potassium temperatures from 900 to 1400 F, flow rates from 0.75 to 4.85 lb/sec, developed pressures up to 340 psi, net positive suction heads (NPSH) from 1 to 22 psi, and NaK coolant temperatures from 800 to 950 F. The maximum efficiency at the pump design point of 3.25 lb/sec flow rate, 240 psi developed pressure, 1000 F potassium inlet temperature, and 800 F NaK coolant temperature was 16.3 percent. The tests also showed successful operation of the pump at an NPSH as low as 1.5 psi without cavitating.
Powell, A. H.↗
Bleed Cycle Propellant Pumping in a Gas-Core Nuclear Rocket Engine System
The performance of ideal and real staged primary propellant pumps and bleed-powered turbines was calculated for gas-core nuclear rocket engines over a range of operating pressures from 500 to 5000 atm. This study showed that for a required engine operating pressure of 1000 atm the pump work was about 0.8 hp/(lb/sec), the specific impulse penalty resulting from the turbine propellant bleed flow as about 10 percent; and the heat required to preheat the propellant was about 7.8 MW/(lb/sec). For a specific impulse above 2400 sec, there is an excess of energy available in the moderator due to the gamma and neutron heating that occurs there. Possible alternative pumping cycles are the Rankine or Brayton cycles.
Gas-core↗
Fabrication and test of a space power boiler feed electromagnetic pump. 3: Endurance and final performance tests
A three-phase helical induction electromagnetic pump designed for the boiler feed pump of a potassium Rankine cycle space power system was developed and built. It was mounted in a liquid metal test loop and successfully tested over a range of potassium temperatures from 900 to 1400 F, flow rates from 0.75 to 4.85 lb/sec, developed pressures up to 340 psi, net positive suction head from 1 to 22 psi, and NaK coolant temperatures from 800 to 950 F. Maximum efficiency at design point conditions of 3.25 lb/sec flow rate, 240 psi developed head, 1000 F potassium inlet temperature, and 800 F NaK coolant inlet temperature was 16.3 percent. After the performance tests the pump was operated without any difficulty at design point for 10,000 hours, and then a limited number of repeat performance tests were made. There was no appreciable change in pump performance after 10,000 hours of operation. A supplementary series of tests using the quasi-square wave power output of a dc to three-phase ac inverter showed that the pump would operate without difficulty at a frequency as low as 25 Hz, with little loss in efficiency.
Powell, A. H.↗
Fabrication and test of a space power boiler feed electromagnetic pump. Part 1: Design and manufacture of pump
A three-phase helical induction electromagnetic (EM) pump has been designed and built. This pump was designed for use as the boiler-feed pump of a potassium Rankine-cycle space electric power system. The pump is constructed of high temperature materials including a T-111 duct, Hiperco 27 magnetic material, nickel clad silver conductor wire, and a completely inorganic insulation system. The pump is designed to deliver 3.25 lb/sec potassium at 1000 F with a developed head of 240 psi while being cooled by 800 F NaK. At these conditions, the overall pump efficiency is expected to be 18%.
Gahan, J. W.↗
Numerical solutions of several reflected shock-wave flow fields with nonequilibrium chemical reactions
The method of characteristics for a chemically reacting gas is used in the construction of the time-dependent, one-dimensional flow field resulting from the normal reflection of an incident shock wave at the end wall of a shock tube. Nonequilibrium chemical reactions are allowed behind both the incident and reflected shock waves. All the solutions are evaluated for oxygen, but the results are generally representative of any inviscid, nonconducting, and nonradiating diatomic gas. The solutions clearly show that: (1) both the incident- and reflected-shock chemical relaxation times are important in governing the time to attain steady state thermodynamic properties; and (2) adjacent to the end wall, an excess-entropy layer develops wherein the steady state values of all the thermodynamic variables except pressure differ significantly from their corresponding Rankine-Hugoniot equilibrium values.
Hanson, R. K.↗
Ogo 5 magnetic-field data near the earth's bow shock - A correlation with theory.
Magnetic-field data obtained in the earth's bow-shock region with a high-resolution triaxial fluxgate magnetometer aboard the Ogo 5 satellite have been correlated with a theory of Tidman and Northrop (1968). These authors have shown that either of two hypotheses about the nature of low-frequency magnetic waves could be invoked to explain previous observations. We have observed exponentially decaying upstream waves that are consistent with only one of these hypotheses. This observation allows use of the theory to infer the local shock velocity and frequency of driving currents within the shock. This method of finding the shock velocity is less sensitive to errors in the plasma parameters than is the method based on the Rankine-Hugoniot relations.
Guha, J. K.↗
Influence of thermal anisotropy on best-fit estimates of shock normals.
This paper deals with the influence of thermal anisotropy on least-squares estimates of interplanetary shock parameters and the associated normals by using the Rankine-Hugoniot equations. A practical theorem is given for quantitatively correcting for anisotropic effects by weighting the before and after magnetic fields by the same 'anisotropy parameter' h. The quantity h depends only on the thermal anisotropies before and after the shock and on the angles between the magnetic fields and the shock normal. It is shown that, for fast shocks and for a liberal range of realistic conditions, the quantity h lies in the range from 0.90 to 1.22. The theorem can also be applied to most slow shocks, but in those instances h usually should be lower and sometimes markedly lower than unity.
Lepping, R. P.↗
A two-spacecraft test of a single spacecraft method of estimating shock normals
By assuming the validity of a subset of the Rankine-Hugoniot conservation relations for interplanetary (IP) shocks in an isotropic medium it has been demonstrated, in principle, that improved shock normals can be calculated by using a least-squares technique on combined magnetic field and plasma data from a single spacecraft. The scheme uses those six conservation relations not involving pressure and temperature. This paper deals with a test of the scheme by examining in detail a shock across which the magnetic field changed direction by a small amount (approximately 10 deg). On January 26, 1968 at about 1430 UT this shock was observed by the plasma and magnetic field instruments in Explorers 33 and 35. The spacecraft were 76.6 and 56.9 R sub E sunward of the earth, respectively (and 43.5 R sub E from each other), and therefore well outside the earth's bow shock region, a necessary condition for a valid test.
Lepping, R. P.↗
Reinterpretation of the Pioneer 6 bow shock crossing.
This paper re-examines and reinterprets the interesting bow shock crossing of Pioneer 6 on December 16, 1965, by combining the high-resolution data for the magnetic field measurements with all the available plasma data. It is shown that, although a small correction of the magnetic field data improves the validity test of the MHD Rankine-Hugoniot (R-H) conditions, it is the plasma density measurements that are the principal source of the remaining inconsistencies. With the exception of the densities, the best agreement between the measurements and the R-H relations is obtained when the specific heat ratio is slightly less than the classical value of 5/3 expected for a magnetized plasma in the magnetosheath. A more accurate shock normal determination has been made, and it is found that the shock itself is possibly in motion with respect to the earth and that locally it may be approximated as a normal shock.
Mariani, F.↗
Recent materials compatibility studies in refractory metal-alkali metal systems for space power applications.
Advanced Rankine and other proposed space power systems utilize refractory metals in contact with both single-phase and two-phase alkali metals at elevated temperatures. A number of recent compatibility experiments are described which emphasize the excellent compatibility of refractory metals with the alkali metals, lithium, sodium, and potassium, under a variety of environmental conditions. The alkali metal compatibilities of tantalum-, columbium-, molybdenum-, and tungsten-base alloys are discussed.
Harrison, R. W.↗