Search NASA⌕ Search

SEARCH · Search NASA

Results for “Receivers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Submillimeter heterodyne receiver for the CSO telescope

This task is to build a cryogenically cooled 620 to 700 GHz astronomical receiver that will be used as a facility instrument at the CalTech Submillimeter Observatory (CSO) on Mauna Kea, Hawaii. The receiver will have applications as a very high resolution spectrometer to investigate spectral lines in planetary and satellite atmospheres, and comets. The receiver will also be used to make continuum measurements of planets, satellites, and asteroids. During FY88, a scale model (200 GHz) SIS mixer radiometer was built and intrgrated into a cryostat designed for use on the CSO telescope. This system will serve as a model to guide the work on the higher frequency mixer. A solid state local oscillator source that covers two bands in the 600 to 700 GHz has been developed under contract JPL and will be delivered before the end of the year. Work has continued on the SIS materials needed for the 620 to 700 GHz mixer. Test hardware has been developed which allow the 1 to 5 curves for SIS material to be easily measured.

Gulkis, S.↗
NASA NTRS1988

Design and predicted performance of the GPS demonstration receiver for the NASA Topex satellite

NASA's Ocean Topography Experiment (Topex) satellite will perform topographic ocean mapping. Topex will carry an experimental tracking system based on the use of GPS (Global Positioning System). An onboard GPS Demonstration Receiver (GPSDR) will be used with a network of up to ten receivers at precisely known ground sites. Following a brief overview of the Topex mission and its derived accuracy requirements, the authors describe the design of the GPSDR. The major hardware and software components are reviewed and discussed. Projected receiver tracking and navigation performance measures are presented and discussed.

Carson, Lance↗
NASA NTRS1989

False lock in quadriphase receivers with unequal I- and Q-channel data rates

Results are presented concerning the noise-free false-lock problem in quadriphase receivers with unequal I-channel and Q-channel data rates. It is shown that false lock may occur when the incoming carrier frequency and the loop VCO (voltage-controlled oscillator) frequency differ by an amount that is a linear combination of a quarter of I-channel and Q-channel data rates. General expressions for the false-lock performance of quadriphase receivers are given for random as well as periodic data patterns. Specific closed-form expressions for the false-lock margin are are derived when the arm filters of the quadriphase receivers are single-pole Butterworth filters, and the format of the random data is NRZ (nonreturn-to-zero). Numerical evaluations of false-lock margin as a function of the product of 3-dB arm-filter bandwidth and symbol duration are carried out for random data using various arm filters and for different periodic I-chanel and Q-channel data patterns.

Cideciyan, Roy D.↗
NASA NTRS1990

Digital Doppler extraction demonstration with the advanced receiver

A digital Doppler extraction demonstration with the Advanced Receiver 2 (ARX 2) tracking Pioneer 10 and Voyager 2 is described. The measured results are compared with those of the Block 4 receiver that was operating in parallel with the ARX 2. It is shown that the ARX 2 outperforms the Block 4 receiver in terms of Allan variance of the Doppler residuals, the amount of which depends on the scenario of interest.

Hinedi, S.↗
NASA NTRS1989

Simplified calculation of solar flux distribution on the side wall of cylindrical cavity solar receivers

A simple solar flux calculation algorithm for a cylindrical cavity type solar receiver has been developed and implemented on an IBM PC-AT. Using cone optics, the contour error method is utilized to handle the slope error of a paraboloidal concentrator. The flux distribution on the side wall is calculated by integration of the energy incident from cones emanating from all the differential elements on the concentrator. The calculations are done for any set of dimensions and properties of the receiver and the concentrator, and account for any spillover on the aperture plate. The results of this algorithm compared excellently with those predicted by more complicated programs. Because of the utilization of axial symmetry and overall simplification, it is extremely fast. It can be esily extended to other axisymmetric receiver geometries.

Bhandari, P.↗
NASA NTRS1989

Adaptive narrow-band interference rejection in a DS spread-spectrum intercept receiver using transform domain signal processing techniques

An intercept receiver which uses a transform-domain-processing filter is described. This receiver detects direct-sequence BPSK spread-spectrum signals in the presence of narrowband interference by employing adaptive narrowband interference rejection techniques. The improvement in the system performance over that of conventional detection techniques is shown by presenting the results of experimental measurements of probability of detection versus false alarm for an enhanced total power detector. Also presented are certain results corresponding to detection of the spectral lines generated at twice the carrier frequency, wherein the goal is often not just signal detection, but also carrier frequency estimation. The receiver uses one of two transform-domain-processing techniques for adaptive narrowband interference rejection. In the first technique, the narrowband interference is detected and excised in the transform domain by using an adaptive notch filter. In the second technique, the interference is suppressed using soft-limiting in the transform domain.

Gevargiz, John↗
NASA NTRS1989

A Brayton cycle solar dynamic heat receiver for space

The detailed design of a heat receiver developed to meet the requirements of the Space Station Freedom, which will be assembled and operated in low earth orbit beginning in the mid-1990's, is described. The heat receiver supplies thermal energy to a nominal 25-kW closed-Brayton-cycle power conversion unit. The receiver employs an integral thermal energy storage system utilizing the latent heat of a eutectic-salt phase-change mixture to store energy for eclipse operation. The salt is contained within a felt metal matrix which enhances heat transfer and controls the salt void distribution during solidification.

Sedgwick, L. M.↗
NASA NTRS1989

Brayton advanced heat receiver development program

NASA Lewis Research Center is managing an advanced solar dynamic (ASD) space power program. The objective of the ASD program is to develop small and lightweight solar dynamic systems which show significant improvement in efficiency and specific mass over the baseline design derived from the Space Station Freedom technology. The advanced heat receiver development program is a phased program to design, fabricate and test elements of a 7-kWe heat-receiver/thermal-energy-storage subsystem. Receivers for both Brayton and Stirling heat engines are being developed under separate contracts. Phase I, described here, is the current eighteen month effort to design and perform critical technology experiments on innovative concepts designed to reduce mass without compromising thermal efficiency and reliability.

Heidenreich, G. R.↗
NASA NTRS1991

Digital Signal Combiner For Receiving-Antenna Feed Array

Proposed digital system combines digitized baseband samples of signals received by array of feeds in large Cassegrainian paraboloidal-dish antenna. Signals received by subantennas in focal-plane array of large dish antenna combined by system compensating in real time for distortions of wave fronts caused by mechanical distortions of antenna. Signal-combining system combines baseband output signals of receiver front ends according to complex weighting parameters estimated from signals themselves. Intended to compensate in real time for degradation of signal-to-noise ratio by vibrational, gravitational, and wind-induced deformations of antenna structure.

Vilnrotter, Victor A.↗
NASA NTRS1990

Olympus receiver evaluation and phase noise measurements

A set of measurements performed by the Michigan Tech Sensing and Signal Processing Group on the analog receiver built by the Virginia Polytechnic Institute (VPI) and the Jet Propulsion Laboratory (JPL) for propagation measurements using the Olympus Satellite is described. Measurements of local oscillator (LO) phase noise were performed for all of the LOs supplied by JPL. In order to obtain the most useful set of measurements, LO phase noise measurements were made using the complete VPI receiver front end. This set of measurements demonstrates the performance of the receiver from the Radio Frequency (RF) input through the high Intermediate Frequency (IF) output. Three different measurements were made: LO phase noise with DC on the voltage controlled crystal oscillator (VCXO) port; LO phase noise with the 11.381 GHz LO locked to the reference signal generator; and a reference measurement with the JPL LOs out of the system.

Campbell, Richard L.↗
NASA NTRS1990

Integrated receiver for NASA tracking and data relay satellite system

The tracking and data relay satellite system (TDRSS) provides a flexible communications system for low-earth-orbit spacecraft and a source of tracking data to permit the location of the many orbital platforms to be accessed. Central to the TDRSS ground terminal is the integrated receiver which provides data demodulation, decoding, and deinterleaving over the range of 100 sps to 12 Msps, and all the tracking services in a single high-performance design. The requirements and design of the integrated receiver (IR), as well as an unbalanced quadriphase shift keying (UQPSK) receiver/demodulator under development for use in the TDRSS are discussed. The top level architecture of the IR is presented, and the implementation of the primary functions in the receiver is described. A single IR replaces the 12 different chassis currently required to support a single S-band single-access service. This approach has proven to be successful.

Bricker, P.↗
NASA NTRS1992

Receiver-Coupling Schemes Based On Optimal-Estimation Theory

Two schemes for reception of weak radio signals conveying digital data via phase modulation provide for mutual coupling of multiple receivers, and coherent combination of outputs of receivers. In both schemes, optimal mutual-coupling weights computed according to Kalman-filter theory, but differ in manner of transmission and combination of outputs of receivers.

Kumar, Rajendra↗
NASA NTRS1991

A receiver design for the superconducting cavity-maser oscillator

A new frequency standard was demonstrated with the aid of a double phase locked loop (PLL) receiver. A superconducting cavity maser oscillator (SCMO) and a hydrogen maser are combined to show the medium term performance of the hydrogen maser together with improved short term performance made possible by the SCMO. The receiver, which generates a 100 MHz signal with reduced noise, is phase locked to (and may be used in place of) the 100 MHz hydrogen maser output. The maser signal, 2.69xxx-GHz SCMO output, and a 100 MHz quartz crystal oscillator are optimally combined by the receiver. A measured two source fractional frequency stability of 2 x 10(exp -14) was obtained for a measuring time of r = 1 sec, and 1 x 10(exp -15) at r = 1,000 sec. The 1 sec value is approx. 10 times lower than that for hydrogen masers, while the 1,000 sec value is identical to hydrogen maser performance. The design is based on phase noise models for the hydrogen maser, the SCMO, and quartz crystal oscillators for offset frequencies down to 1 x 10(exp -6) Hz.

Wang, R. T.↗
NASA NTRS1991

Reduced electrical bandwidth receivers for direct detection 4-ary PPM optical communication intersatellite links

This interim progress report consists of copies of three reports written for NASA's Flight System Development and Demonstration (FSDD) project on optical intersatellite links. The first report, 'Test results of the PlessCor avalanche photodiode (APD) preamplifier for use in the 50 Mbps quaternary pulse position modulator (QPPM) receiver,' was prepared for NASA Goddard Space Flight Center. The second, 'Performance of Q-ary PPM receiver under additive white Gaussian noise,' was prepared at the request of NASA Lewis Research Center for testing the electronic systems for the FSDD project. The third, 'Use of a Bessel lowpass filter as an approximate raised cosine filter,' was written for raised cosine filter implementation in the FSDD QPPM receiver.

Davidson, Frederic M.↗
NASA NTRS1992

Receiver performance of laser ranging measurements between the Lunar Observer and a subsatellite for lunar gravity studies

The optimal receiver for a direct detection laser ranging system for slow Doppler frequency shift measurement is shown to consist of a phase tracking loop which can be implemented approximately as a phase lock loop with a 2nd or 3rd order loop filter. The laser transmitter consists of an AlGaAs laser diode at a wavelength of about 800 nm and is intensity modulated by a sinewave. The receiver performance is shown to be limited mainly by the preamplifier thermal noise when a silicon avalanche photodiode is used. A high speed microchannel plate photomultiplier tube is shown to outperform a silicon APD despite its relatively low quantum efficiency at wavelengths near 800 nm. The maximum range between the Lunar Observer and the subsatellite for lunar gravity studies is shown to be about 620 km when using a state-of-the-art silicon APD and about 1000 km when using a microchannel plate photomultiplier tube in order to achieve a relative velocity measurement accuracy of 1 millimeter per second. Other parameters such as the receiver time base jitter and drift also limit performance and have to be considered in the design of an actual system.

Davidson, Frederic M.↗
NASA NTRS1992

Windshear radar calibration: Transmitter power and receiver gain stability

An experimental windshear Doppler radar was flown on 27 occasions during a series of flight experiments in 1991. Radar calibrations were performed by the flight team to monitor the transmitter power and receiver gain from pre-flight to post-flight and from one day to another. From the recorded calibration data, the receiver gain and effective receiver system noise were calculated and tabulated, together with the transmitter power. These quantities of interest are compared for two receiver/transmitter (R/T) units and two intermediate frequency (IF) bandwidths that were tested in various modes. It was found that, in most operating modes, gain stayed within a 2.5-dB range and transmitter power stayed within a 20-watt range. R/T number 1 had 0.8 dB more gain and 1.2 dBm less noise power than R/T number 2. The 7-MHz IF bandwidth resulted in 1 dB more gain and 1 dBm less noise than the 2-MHz IF bandwidth. Depending on the R/T unit and IF bandwidth, the effective system noise power averaged between -107.3 dBm and -109.5 dBm.

Mackenzie, Anne I.↗
NASA NTRS1992

A low-noise 492 GHz SIS waveguide receiver

The design and performance are described of an SIS waveguide receiver which provides low noise performance from 375 to 510 GHz. At its design frequency of 492 GHz the receiver has a double-sideband noise temperature of about 172 K. By using embedded magnetic-field concentrators Josephson pair tunneling is effectively suppressed. Techniques for improving receiver performance are discussed.

Walker, C. K.↗
NASA NTRS1992

A low noise 230 GHz heterodyne receiver employing .25 sq micron area Nb/AlO(x)/Nb tunnel junctions

Recent results for a full height rectangular waveguide mixer with an integrated IF matching network are reported. Two 0.25 sq micron Nb/AlO(x)/Nb superconducting insulating superconducting (SIS) tunnel junctions with a current density of about 8500 A/sq cm and omega RC of about 2.5 at 230 GHz have been tested. Detailed measurements of the receiver noise have been made from 200-290 GHz for both junctions at 4.2 K. The lowest receiver noise temperatures were recorded at 239 GHz, measuring 48 K DSB at 4.2 K and 40 K DSB at 2.1 K. The 230 GHz receiver incorporates a one octave wide integrated low pass filter and matching network which transforms the pumped IF junction impedance to 50 ohms over a wide range of impedances.

Kooi, Jacob W.↗