SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Abstracts of reports concerning noise pollution are presented. The abstracts are grouped in the following areas of activity: (1) sources of noise, (2) noise detection and measurement, (3) noise abatement and control, (4) physical effects of noise and (5) social effects of noise.
Transfer of the forest reserve information system (FRIS) from the Laboratory for Applications of Remote Sensing to St. Regis Paper Company is described. Modifications required for the transfer of the LARYS image processing software are discussed. The reformatting, geometric correction, image registration, and documentation performed for preprocessing transfer are described. Data turnaround was improved and geometrically corrected and ground-registered CCT LANDSAT 3 data provided to the user. The technology transfer activities are summarized. An application test performed in order to assess a Florida land acquisition is described. A benefit/cost analysis of FRIS is presented.
A meeting was held in December 1996, attended by representatives from Department of the Interior (DOI) and National Aeronautical and Space Administration (NASA) at the request of Department of the Interior Secretary, Bruce Babbitt and NASA, Administrator Director Dan Goldin, to discuss the use of hyperspectral systems and related remote sensing technologies in addressing environmental issues of environmental importance to the (DOI). It was determined that NASA/DOI Coordination be established, comprised of representatives from each agency, designated to address the environmental issues and resulting technologies. A steering committee was formed consisting of representatives from NASA Headquarters, NASA PI's from University California-Davis, University of Colorado-Boulder, University of New Hampshire and DOI Bureaus (Indian Affairs, Land Management, Reclamation, National Park Service, and US Geological Survey).
There are limited resources on extraterrestrial bodies and current launch vehicles can only send finite resources on deep space missions. Transporting resources needed for deep space missions is extremely expensive; at tens of thousands of dollars per pound launched. In order to sustain life and establish outposts on other celestial bodies, it is necessary to find a way to utilize the resources that are readily available in these environments. This process is called In Situ Resource Utilization (ISRU), which is comprised of searching for, collecting, processing, and storing materials found on other celestial bodies and using them for construction, science applications, propulsion, and other life sustaining purposes. The processing and use of regolith, which is a loose rocky material found on the surface of bodies like the Moon or Mars, is the main focus of ISRU work done in Swamp Works in the Engineering Development Lab at Kennedy Space Center (KSC). The research Swamp Works has done in regolith applications ranges from construction and infrastructure to propellant production to storage of oxygen and water.
The U.S. Department of Defense (DoD) has long recognized the strategic value of energy to its missions, and the energy resilience of DoD installations has become of increasing concern. Department of Defense Instruction 4170 requires installations to be more energy resilient, and as a result, many installations are pursuing microgrids to meet their energy resiliency goals and requirements. This report provides a resource for stakeholders involved in analyzing and developing microgrid projects at DoD installations. It builds on experience and lessons from the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) in supporting numerous DoD projects, including the microgrid at Marine Corps Air Station Miramar.(1)The report is structured following NREL's microgrid design process.
The Indiana Geological and Water Survey (IGWS) led subtask 1.1 to assess the regional distribution and estimate the storage capacity of Ordovician-Cambrian stratigraphic units located within the partnership region. A comprehensive data set of wireline logs and petrophysical information was used to generate these interpretations. These data include core analysis for porosity and permeability, mercury injection capillary pressure (MICP), and existing well data including location and stratigraphic information. This report includes storage resource estimates (SREs) for three potential storage reservoirs(limestone and dolostone from the Upper Ordovician Trenton Limestone/Black River Group and equivalent units, the Middle Ordovician St. Peter Sandstone, and primary target reservoir rocks of the Lower Ordovician and Upper Cambrian Knox Supergroup and equivalent units) calculated using six methodologies: (1) a fixed value of porosity of 10 percent in all units evaluated; (2) a unique average porosity (per well) from wireline-derived porosity (neutron, sonic, and/or density porosity for each unit); (3) porosity values from core analysis; (4) a depth-dependent porosity model (Knox Supergroup only); (5) porosity based on a model based on petrophysical facies; and (6) SREs using National Energy Technology Laboratory’s CO2 Storage prospeCtive Resource Estimation Excel aNalysis (CO2-SCREEN beta V2). All methods used the same values for thickness for each unit. However, the areal extent of each assessment was limited by the data available for each method. Estimated volumes were calculated in 1-by-1 kilometer grid cells and summarized as county and total stratigraphic unit volumes. The resultant SREs mass are displayed using boxplots, which allow for comparing data statistics (mean values and variability) between methods. Differences observed in SRE results from the six methods are mainly attributable to differences in the data and conceptual models used to interpret or estimate porosity in each method. Based on this systematic variability between methods, it is inferred that methods 1, 4, and 6 are best used for regional-scale reconnaissance estimates of storage capacity while methods 2, 3, and 5 are more appropriate for local scales where more data is required. All estimates are data-density dependent and different methods require different amounts of data for reasonable assessments. ArcMap 10.5.1 software was used to portray SREs to help visualize spatial variance of estimates for each methodology, and more importantly, to highlight those areas having the greatest total storage potential estimates.
This report addresses the design of human-automation interaction from a formal perspective that focuses on the information content of the interface, rather than the design of the graphical user interface. It also addresses the, issue of the information provided to the user (e.g., user-manuals, training material, and all other resources). In this report, we propose a formal procedure for generating interfaces and user-manuals. The procedure is guided by two criteria: First, the interface must be correct, i.e., that with the given interface the user will be able to perform the specified tasks correctly. Second, the interface should be as succinct as possible. The report discusses the underlying concepts and the formal methods for this approach. Several examples are used to illustrate the procedure. The algorithm for constructing interfaces can be automated, and a preliminary software system for its implementation has been developed.
This report addresses the design of human-automation interaction from a formal perspective that focuses on the information content of the interface, rather than the design of the graphical user interface. It also addresses the issue of the information provided to the user (e.g., user-manuals, training material, and all other resources). In this report, we propose a formal procedure for generating interfaces and user-manuals. The procedure is guided by two criteria: First, the interface must be correct, that is, with the given interface the user will be able to perform the specified tasks correctly. Second, the interface should be succinct. The report discusses the underlying concepts and the formal methods for this approach. Two examples are used to illustrate the procedure. The algorithm for constructing interfaces can be automated, and a preliminary software system for its implementation has been developed.
Southeast Offshore Storage Resource Assessment (SOSRA): Summary Report of Knowledge Sharing and Technology Transfer Activities (Deliverable 8.2.b)
This is the final report for the project entitled "Development of Resources and Tools to Improve Oil Content and Quality in Pennycress". The project focused on three main aspects: 1) Investigate pennycress natural variation to identify candidate genes and biomarkers associated with oil accumulation and fatty acid composition. 2) Identify targets to improve oil content and composition. 3) Establish metabolic engineering targets and develop community resources.
The report presents a framework for states that seek to incorporate equity into regulatory decision-making. Berkeley Lab contextualizes approaches and metrics from various states into example processes to exemplify how this may be done, including topics such as the development of equity goals and definitions, intervenor funding, community engagement, performance-based ratemaking, and utility resource planning. The report offers five takeaways and considerations, supported by these examples: 1. Equity comprises multiple tenets and stages, all of which must be considered in parallel. 2. At the start of designing new equity-related processes, it is critical to establish clear and actionable goals, definitions, roles, and responsibilities to ensure progress. 3. Once goals are established, it is critical to align tools and metrics that bridge the gap between what an intervention may do and how it may impact communities and households. 4. Processes should be stakeholder driven. It is important to not only increase education and outreach, but to actively seek out and incorporate feedback from inclusive public processes and build in accountability mechanisms. Processes should be iterative. Feedback loops between evaluations and program design provide the flexibility to better align existing interventions with community priorities and to incorporate equity into future decision-making.
This report gives an overview of quantum information sciences, quantum resources, preparing a quantum state, and other useful resources.
In 1952, E.F. Gross and N.A. Karryev discovered excitons of big radius also called the Wannier–Mott excitons. Their energy spectrum, response to external electric and magnetic fields, and also elastic deformations of a crystal were extensively studied in the 1960s–1970s. The second wave of interest to excitons in Cu{sub 2}O crystals appeared comparatively recent, in 2014, after the “giant” highly excited exciton states had been observed in this material. A theoretical description of highly excited exciton states needs, as a rule, new approaches, because, for such states, a deviation from the exactly solved hydrogen-like model becomes substantial and a numerical solution of the Schrödinger equation with allowance made for the features of the crystal energy band structure becomes extremely resource consuming. This report is a brief review of recent theoretical and experimental studies of the fine structure of the exciton energy spectrum in copper protoxide.
The Durable Module Materials Consortium's overarching goal is to understand photovoltaic (PV) module degradation and enable high-energy-yield modules with a 50-year lifespan. One of DuraMAT's milestones this year was to identify cases where the whole of DuraMAT really mattered and made an impact that was greater than the sum of the project results. We identified five key results that demonstrate progress toward enabling 50-year modules for a resilient PV industry: 1) Resilient PV Systems; 2) Proactive Materials Screening; 3) Understanding Wear-Out; 4) Identifying Which Cracks Matter; and 5) Software Tools and Data Resources This annual report summarizes these key results, as well as reviewing our other ongoing work in fiscal year 2024.
The OpenCL standard is an open programming model for accelerating algorithms on heterogeneous computing system. OpenCL extends the C-based programming language for developing portable codes on different platforms such as CPU, Graphics processing units (GPUs), Digital Signal Processors (DSPs) and Field Programmable Gate Arrays (FPGAs). The Intel FPGA SDK for OpenCL is a suite of tools that allows developers to abstract away the complex FPGA-based development flow for a high-level software development flow. Users can focus on the design of hardware-accelerated kernel functions in OpenCL and then direct the tools to generate the low-level FPGA implementations. The approach makes the FPGA-based development more accessible to software users as the needs for hybrid computing using CPUs and FPGAs are increasing. It can also significantly reduce the hardware development time as users can evaluate different ideas with high-level language without deep FPGA domain knowledge. Benchmarking of OpenCL-based framework is an effective way for analyzing the performance of system by studying the execution of the benchmark applications. CHO is a suite of benchmark applications that provides support for OpenCL [1]. The authors presented CHO as an OpenCL port of the CHStone benchmark. Using Altera OpenCL (AOCL) compiler to synthesize the benchmark applications, they listed the resource usage and performance of each kernel that can be successfully synthesized by the compiler. In this report, we evaluate the resource usage and performance of the CHO benchmark applications using the Intel FPGA SDK for OpenCL and Nallatech 385A FPGA board that features an Arria 10 FPGA device. The focus of the report is to have a better understanding of the resource usage and performance of the kernel implementations using Arria-10 FPGA devices compared to Stratix-5 FPGA devices. In addition, we also gain knowledge about the limitations of the current compiler when it fails to synthesize a benchmark application.
Analysis systems incorporating atmospheric observations could provide a powerful tool for validating fossil fuel CO 2 (ffCO 2 ) emissions reported for individual regions, provided that fossil fuel sources can be separated from other CO 2 sources or sinks and atmospheric transport can be accurately accounted for. We quantified ffCO 2 by measuring radiocarbon ( 14 C) in CO 2 , an accurate fossil-carbon tracer, at nine observation sites in California for three months in 2014-15. There is strong agreement between the measurements and ffCO 2 simulated using a high-resolution atmospheric model and a spatiotemporally-resolved fossil fuel flux estimate. Inverse estimates of total in-state ffCO 2 emissions are consistent with the California Air Resources Board's reported ffCO 2 emissions, providing tentative validation of California's reported ffCO 2 emissions in 2014-15. Continuing this prototype analysis system could provide critical independent evaluation of reported ffCO 2 emissions and emissions reductions in California, and the system could be expanded to other, more data-poor regions.
This report documents the Consortium for Advanced Simulation of LWRs (CASL) verification and validation plan. The document builds upon input from CASL subject matter experts, most notably the CASL Challenge Problem Product Integrators, CASL Focus Area leaders, and CASL code development and assessment teams. This document will be a living document that will track progress on CASL to do verification and validation for both the CASL codes (including MPACT, CTF, BISON, MAMBA) and for the CASL challenge problems (CIPS, PCI, DNB). The CASL codes and the CASL challenge problems are at differing levels of maturity with respect to validation and verification. The gap analysis will summarize additional work that needs to be done. Additional VVUQ work will be done as resources permit. This report is prepared for the Department of Energy’s (DOE’s) CASL program in support of milestone CASL.P13.02.
This report is an update to the NETL report on the same topic that examined the potential system performance of the Electric Reliability Council of Texas (ERCOT) system during the summer of 2020. Anticipated reserve margins in ERCOT have risen year-over-year from the 10.7 percent reported in ERCOT’s Final Seasonal Assessment of Resource Adequacy (SARA) for Summer 2020 to 15.7 percent for Summer 2021 in ERCOT’s Capacity, Demand and Reserves [CDR] report published in December 2020 and 2021 Summer Preliminary SARA published in March 2021. Using data from ERCOT’s 2021 Summer SARA, CDR, and historical performance data, six economic dispatch scenarios using PROMOD were developed to assess the risk to ERCOT of a load shedding event for Summer 2021. The results suggest that ERCOT could make it through the summer season without a loss of load event, as long as the weather remains normal. However, through a combination of scenarios, including increased demand, increased forced outages, and low wind output, ERCOT is likely to find itself operating in emergency conditions.