Search NASA⌕ Search

SEARCH · Search NASA

Results for “SNR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

High-velocity iron absorption lines in supernova remnant 1006

The very strong, broad absorption lines of a sdOB star continuum shown in the International Ultraviolet Explorer spectrum of the Schweizer-Middleditch star projected near the center of supernova remnant SNR 1006 are investigated. It is found that strong Fe(+) resonance absorption lines are present whose centers show zero radial velocity while their profiles are broadened by approximately 5000-6000 km/s. Also identified are redshifted Si(+), Si(2+), and Si(3+) lines at velocities of approximately 5000 km/s. Results show that the absorptions must occur in the ejecta of the supernova. The strength and symmetric width of the Fe(+) line indicates that the bulk of the ejecta is iron, in agreement with the current theory for the origin of Type I supernova. It is suggested that the previous failure to detect strong Fe emission lines in the X-ray spectra of this and other young Type I SNRs may be a result of the ejecta not having had time to interact significantly with the ambient medium. In addition, the presence of redshifted adsorption lines due to supernova ejecta in its spectrum shows that this star is located behind the SNR and is not physically associated with it.

Wu, C.-C.↗

Simulations for Full Unit-memory and Partial Unit-memory Convolutional Codes with Real-time Minimal-byte-error Probability Decoding Algorithm

A program which was written to simulate Real Time Minimal-Byte-Error Probability (RTMBEP) decoding of full unit-memory (FUM) convolutional codes on a 3-bit quantized AWGN channel is described. This program was used to compute the symbol-error probability of FUM codes and to determine the signal to noise (SNR) required to achieve a bit error rate (BER) of 10 to the minus 6th power for corresponding concatenated systems. A (6,6/30) FUM code, 6-bit Reed-Solomon code combination was found to achieve the required BER at a SNR of 1.886 dB. The RTMBEP algorithm was then modified for decoding partial unit-memory (PUM) convolutional codes. A simulation program was also written to simulate the symbol-error probability of these codes.

Vo, Q. D.↗

The origin of the Gum nebula

Obsrvations and theoretical investigations of the Gum nebula (GN) since about 1971 are reviewed. Direct observations of the GN, the Vela X supernova remnant (SNR), the Vela pulsar, and other stars in or near the GN are discussed with those of related phenomena such as the radio loops and known SNRs; the emphasis is on studies of the interstellar absorption lines, the evidence for hot gas in the GN, and the extended diffuse emission. The four basic models proposed for the GN are considered: a fossil Stromgren sphere, an old SNR, an H II region, or a superbubble. The GN physical parameters predicted by each model are listed in a table and compared. A minimum explanation which attributes the 36 x 36-deg filamentary structure and the 125-pc radius structure to the action of the stellar winds from Zeta Pup and Gamma-2 Vel (and perhaps the effect of a Vel X supernova explosion 20,000 years ago) is found most appropriate, at least until the questions of the net expansion rate of the GN (about 20 km/sec or about zero?) and the existence of the diffuse emission beyond the filamentary structure are resolved by observations.

Bruhweiler, F. C.↗

The kinematics and structure of N63A and associated H II regions

Shull (1983) and Shull et al. (1982) discussed very high resolution spectrographic observations of bright knots in the filaments of the Cygnus Loop, IC 443, Puppis A, and Vela X supernova remnants (SNRs). Information on the small-scale thermal, turbulent, and bulk radial motions of the gas in these galactic remnants was obtained on the basis of an analysis of the spectral-line profiles. An analysis by Shull (1983) of N49, located in the Large Magellanic Cloud (LMC) is concerned with the large-scale structural and kinematic properties of N49 as it evolves in a cloudy interstellar medium (ISM). The present investigation represents the companion analysis of N63A, which is also a Type II SNR in the LMC. Echelle spectrograph observations indicate, for the first time, the large-scale kinematic and structural properties of the N63A system. They show clearly that the SNR, like N49, is evolving in a clumpy ISM.

Shull, P., Jr.↗

Radio and X-ray maps of the supernova remnant W49B

New high resolution radio maps of the supernova remnant (SNR) W49B at 6 and 20 cm are presented, together with soft X-ray maps representing the first detection of the SNR in X-rays. The source is also detected in the medium energy X-ray band. The radio maps have a resolution of about 12 arcsec and show that the emission is distributed in an incomplete shell of radius about 100 arcsec, with intense ridges in the west and east. There is no indication of significant spectral variations between 6 and 20 cm and no significant polarization is detected. The X-ray map shows emission which is clearly extended and increases in intensity toward the center of the radio remnant, with no evidence for limb brightening. The X-ray surface brightness distribution falls to half peak value at about 75 arcsec radius. There is no evidence for a pointlike X-ray source.

Pye, J. P.↗

X-ray spectra of young supernova remnants

Einstein solid-state-spectrometer (SSS) spectra are presented for the Crab Nebula, Cas A, SN 1006, the Tycho SNR, and the Kepler SNR. The history of X-ray observations of SNRs is reviewed; the SSS instrument is briefly characterized; a reduction technique which accounts for all background sources in the 0.5-4.5-keV band is applied; and the physical models of SNRs constructed to reproduce the refined spectra are discussed. The limitations of the modeling methods and the need for further observations, especially of localized regions, are indicated.

Holt, S. S.↗

Performance of the Dsa's Subcarrier Demodulation Digital Loop

The subcarrier demodulation digital loop is part of the baseband assembly. The subcarrier demodulator is a fourth-order Costas-type loop corresponding to a type 2 analog loop in terms of steady state response. The expected value and the variance of the error signal are determined as functions of the input SNR. A Nyquist sampling rate of the input signal is assumed. From the integro-difference equations a mixed s/z domain block diagram is obtained. From the loop's transfer function a set of gains for the loop filter is obtained. Also, a set of state equations is presented for future reference. Finally, the noise-equivalent bandwidths are calculated for normalized computation times of 0, 0.25 and 0.5. The subcarrier demodulator analyzed tracks a parabolic phase input with finite steady state error. Since at each update instant the loop gains are adjusted to compensate for the variations in SNR of the input signal, the noise-equivalent bandwidth is maintained constant.

Simon, M. K.↗

Performance analysis of the DSN baseband assembly (Bba) Real-Time Combiner (RTC)

The operation of the BBA Real Time Combiner (RTC) is discussed and its performance investigated in detail. It is shown that each channel of the RTC can be modelled by a simple block diagram in the z-transform domain from which all pertinent transient and steady state behavioral characteristics can be determined. In particular, the characteristic equation of the tracking loop and its equivalent noise bandwidth are found and used to evaluate the closed loop transient response and steady-state mean squared timing jitter. The impact of the totality of these loop jitter contributions on the combiner output SNR is evaluated and illustrated numerically. These results show that for parameters of interest to various space missions, the RTC is capable of providing significant SNR improvement relative to a single receiving antenna.

Simon, M. K.↗

Performance analysis of the DSN baseband assembly (Bba) Real-Time Combiner (RTC)

The operation of the BBA Real Time Combiner (RTC) is discussed and its performance investigated in detail. It is shown that each channel of the RTC can be modelled by a simple block diagram in the z-transform domain from which all pertinent transient and steady state behavioral characteristics can be determined. In particular, the characteristic equation of the tracking loop and its equivalent noise bandwidth are found and used to evaluate the closed loop transient response and steady state mean squared timing jitter. The impact of the totality of these loop jitter contributions on the combiner output SNR is evaluated and illustrated numerically. These results show that for parameters of interest to various space missions, the RTC is capable of providing significant SNR improvement relative to a single receiving antenna.

Simon, M. K.↗

Possible origin of the anomalous component of cosmic rays

The possible origin of the anomalous cosmic rays (ACR) are studied in terms of stellar wind injection from O type stars and their acceleration in shock fronts of SNR's. It is assumed that a fraction of heavy ions will encounter interstellar shock fronts of SNR's and these are accelerated to about 5 to 100 MeV/N and give rise to ACR's. Typically these ions would travel a distance of the order of a few 1000 pc. Therefore it is estimated that O type stars in a volume of radius of a few Kpc around the solar system are contributing to the intensity of ACR in the local ISM. From observational data, the intensity of ACR in the local ISM is estimated. It is suggested that these ACR ions enter the solar system along the solar dipole field lines connected to the interplanetary magnetic field lines.

Biswas, S.↗

X-ray emission from supernova remnants MSH 14 - 63 and RCW 103

Electron-ion collisions, heavy element enrichment of emissions from reverse-shocked ejecta, abundances in the interstellar medium (ISM), the correspondence between the projected and measured age, ISM particle density, and distance, and classification factors for Type I or II supernovae are examined using a nonequilibrium ionization (NEI) model. The NEI model accounts for the absence of collisional ionization equilibrium and possibly thermal equilibrium between electrons and ions behind the shock fronts, and describes the emission spectra from ejecta and the shocked ISM. When applied to data from the SNR MSH 14 - 63 a non-Coulomb, ion-electron interaction is obtained that is consistent with a shocked ISM. For the SNR RCW 103, however, the processes behind the shock front are not discernable, although the elemental abundances will have solar values if the interactions are non-Coulomb. The age of RCW 103 must be approximated from physical data, as Chinese astronomers would not have been able to see the event from their position on earth two millenia ago.

Nugent, J. J.↗

Improved optical spectrophotometry of supernova remnants in M33

Optical spectra of SNRs in M33 have been used to investigate abundance gradients and SNR evolution in this galaxy. Abundances of O, N, and S are derived from the spectra using new shock models by Dopita et al. (1984). The results for N and S show abundance gradients similar to those in NGC 300 and the Galaxy. The O abundances may be affected by possible contamination from H II regions and low-velocity shocks. Electron densities derived from the forbidden S II 6717 A/6731 A line ratio are used with a pressure equilibrium argument to estimate the initial explosion energy for each SNR. Evolutionary models for the remnants are investigated, and the distribution of the number of remnants with diameter is found to be consistent with free expansion of the SNRs to diameters of about 26 pc. The results may also be consistent with Sedov evolution if the ranges of initial supernova energies and surrounding interstellar medium densities are large enough.

Blair, W. P.↗

In search of a 2-dB coding gain

A recent code search found a (15,1/5), a (14,1/6), and a (15,1/6) convolutional code which, when concatenated with a 10-bit (1023,959) Reed-Solomon (RS) code, achieves a bit-error rate (BER) of 0.000001 at a bit signal-to-noise ratio (SNR) of 0.50 dB, 0.47 dB and 0.42 B, respectively. All of these three codes outperform the Voyager communication system, our baseline, which achieves a BER of 10.000001 at bit SNR of 2.53 db, by more than 2 dB. The 2 dB coding improvement goal was exceeded.

Yuen, J. H.↗

Periodic variations in the signal-to-noise ratios of signals received from the ICE spacecraft

Data from the ICE probe to comet Giacobini-Zinner are analyzed to determine the effects of spacecraft rotation upon the signal to noise ratio (SNR) for the two channels of data. In addition, long-term variations from sources other than rotations are considered. Results include a pronounced SNR variation over a period of three seconds (one rotation) and a lesser effect over a two minute period (possibly due to the receiving antenna conscan).

Nadeau, T.↗

Image gathering and processing - Information and fidelity

In this paper we formulate and use information and fidelity criteria to assess image gathering and processing, combining optical design with image-forming and edge-detection algorithms. The optical design of the image-gathering system revolves around the relationship among sampling passband, spatial response, and signal-to-noise ratio (SNR). Our formulations of information, fidelity, and optimal (Wiener) restoration account for the insufficient sampling (i.e., aliasing) common in image gathering as well as for the blurring and noise that conventional formulations account for. Performance analyses and simulations for ordinary optical-design constraints and random scences indicate that (1) different image-forming algorithms prefer different optical designs; (2) informationally optimized designs maximize the robustness of optimal image restorations and lead to the highest-spatial-frequency channel (relative to the sampling passband) for which edge detection is reliable (if the SNR is sufficiently high); and (3) combining the informationally optimized design with a 3 by 3 lateral-inhibitory image-plane-processing algorithm leads to a spatial-response shape that approximates the optimal edge-detection response of (Marr's model of) human vision and thus reduces the data preprocessing and transmission required for machine vision.

Huck, F. O.↗

The Cygnus loop - A detailed comparison of X-ray and optical emission

A comparison at a resolution of 17 arcsec is presented between optical emission from forbidden O III and forbidden S II and the thermal X-ray emission for a field on the southeast edge of the Cygnus Loop SNR. The relationship between optical and X-ray emission in the field is described, generalizing to the Loop as a whole when possible. Several possible explanations for the presence of bright X-ray emission in the vicinity of optical emission are presented and evaluated based on the data. These mechanisms involve evaporation, gradual variations and gradients in the density of the preshock intercloud medium, and additional compression of material which has already been heated to X-ray temperatures by the adiabatic blast wave. The additional compression could result from rapid deceleration of the blast wave itself or from reshocking by reflected or bow shocks around dense clouds. Implications of the observations for models of SNR evolution and the interstellar medium are discussed.

Cox, D. P.↗

Optimum coding techniques for MST radars

The optimum coding technique for MST (mesosphere stratosphere troposphere) radars is that which gives the lowest possible sidelobes in practice and can be implemented without too much computing power. Coding techniques are described in Farley (1985). A technique mentioned briefly there but not fully developed and not in general use is discussed here. This is decoding by means of a filter which is not matched to the transmitted waveform, in order to reduce sidelobes below the level obtained with a matched filter. This is the first part of the technique discussed here; the second part consists of measuring the transmitted waveform and using it as the basis for the decoding filter, thus reducing errors due to imperfections in the transmitter. There are two limitations to this technique. The first is a small loss in signal to noise ratio (SNR), which usually is not significant. The second problem is related to incomplete information received at the lowest ranges. An appendix shows a technique for handling this problem. Finally, it is shown that the use of complementary codes on transmission and nonmatched decoding gives the lowest possible sidelobe level and the minimum loss in SNR due to mismatch.

Sulzer, M. P.↗

Loran-C approach guidance project current status

There are four areas of work in the Loran-C flight test project. Current results provide performance data on the effects of Signal Noise Ratio (SNR) on the dynamic performance of the receiver filters for Loran-C data, and data on Loran-C grid deformation at a microscale of 100 meters. The Loran-C receiver provides a line of position (LOP) Master and Slave transmitter at an angle 0 to magnetic north. No transformation to latitude-longitude reference frame is required since this is the major source of Loran-C navigation errors. A local coordinate frame is established centered at touchdown point on the runway with directions along and across the runway. A Loran-C data collection system was set up. The Loran-C data are sent directly to an Apple II computer with a 12 inch monitor. The effect of SNR on Loran-C precision is shown for two receiver filters of different frequency response. A set of ground level static readings of touchdown was taken around Hanscom Field and transferred to an accurate detailed layout drawing; this showed local distortions of the average touchdown values.

Elias, A. L.↗