Search NASA⌕ Search

SEARCH · Search NASA

Results for “STONES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Rb-Sr studies of CI and CM chondrites

Rb-Sr whole rock analyses have been performed on 2 CI and 3 CM chondrites. Four of these stones (Ivuna, Orgueil, Cold Bokkeveld and Erakot) were previously studied in this laboratory and were shown to be discordant from a 4.6 Gyr isochron. The fifth, Murchison, was not previously studied. The new data support the discordance of the first four stones, and indicate that Murchison is also discordant. Studies of Sr isotope ratios in unspiked Orgueil show that the discordance is not due to inhomogeneities in the Sr-84/Sr-86 ratio caused by incomplete mixing of nucleosynthesis products. In order to gauge the effects of weathering, two leaching experiments were performed on fresh, interior samples of Murchison; one for a period of 1.5 hr and the other for 117 hr. The results indicate that the relative solubility of nonradiogenic Sr is approximately twice that of Rb and radiogenic Sr is more soluble than the nonradiogenic Sr.

Mittlefehldt, D. W.↗

Lathe Attachment Finishes Inner Surface of Tubes

Extremely smooth finishes are machined on inside surfaces of tubes by new attachment for a lathe. The relatively inexpensive accessory, called a "microhone," holds a honing stone against workpiece by rigid tangs instead of springs as in conventional honing tools. Inner rod permits adjustment of microhoning stone, while outer tube supports assembly. Outer tube is held between split blocks on lathe toolpost. Microhoning can be done with either microhone or workpiece moving and other member stationary.

Lancki, A. J.↗

Distribution and enantiomeric composition of amino acids in the Murchison meteorite

Studies of the amino acid contents and enantiomeric compositions of a single stone from the Murchison meteorite are reported. Water-extracted and 6M HCl-extracted samples from the meteorite interior of meteorite fragments were analyzed by gas chromatography and combined gas chromatography-chemical ionization mass spectrometry. Examination of the D/L ratios of glutamic acid, aspartic acid, proline, leucine and alanine reveals those amino acids extractable by water to be partially racemized, whereas the acid-extracted amino acids were less racemized. The amino acid composition of the stone is similar to those previously reported, including the absence of serine, threonine, tyrosine phenylalanine and methionine and the presence of unusual amino acids including such as isovaline, alpha-aminoisobutyric acid and pseudoleucine. It is concluded that the most likely mechanism accounting for the occurrence of nonracemic amino acid mixtures in the Murchison meteorite is by extraterrestrial stereoselective synthesis or decomposition reactions.

Engel, M. H.↗

Cutting head for ultrasonic lithotripsy

A cutting head for attachment to the end of the wire probe of an ultrasonic kidney stone disintegration instrument is described. The cutting head has a plurality of circumferentially arranged teeth formed at one end thereof to provide a cup shaped receptacle for kidney stones encountered during the disintegration procedure. An integral reduced diameter collar diminishes stress points in the wire and reduce breakage thereof.

Anguluo, E. D.↗

Ragland - An LL3.4 chondrite find from New Mexico

The Ragland, New Mexico, chondrite was found in 1978. It consists of a single stone of 12.16 kg that broke into three pieces. The stone is moderately weathered and has a pronounced chondritic texture. Bulk composition favors an LL classification, and modal analysis and oxygen isotopic composition are consistent with this. The thermoluminescence sensitivity of 0.056 + or - 0.020 normalized to Dhajala, compositional variability of olivine (mean Fa 18.3, sigma = 10.1) and low-Ca pyroxene (mean Fs 14.6, sigma = 6.7), and Ca concentrations in olivine indicate metamorphic subtype 3.4 + or - 0.1. The isotopically heavy oxygen composition, which is characteristic of subtypes 3.0-3.1, may be a primary characteristic and not a result of weathering. Low concentrations of radiogenic Ar-40 and planetary Ar-36 suggest noble gas loss.

Recca, S. I.↗

Distribution of desert varnish in Arizona

Desert varnish is the dark coat of clay and ferromanganese oxides developed on exposed rock surfaces in arid regions. It forms from the accretion of material from windblown dust. The distribution of desert varnish was mapped in Arizona. It was discovered that desert varnish could be mapped on a regional scale. Well developed desert varnish is common on stable rock surfaces in areas having alkaline soils and less than about 25 cm of annual precipitation. Rock surfaces in areas having more than 40 cm of annual precipitation are generally devoid of desert varnish. An experiment was conducted with varnished desert pavement stone. The stones were broken in half and half was set on a roof in central Illinois from April until October. Removed from the alkaline desert environment, it only took seven months for the varnish to develop an eroded appearance. This experiment graphically illustrates the dependency of desert varnish on alkalinity. In this context, the zones of eroded desert varnish in Arizona indicate that the area of active desert varnish formation has fluctuated, expanding in drier times and contracting/eroding in wetter times.

Elvidge, Christopher D.↗

Cosmogenic Ar-36 from neutron capture by Cl-35 in the Chico L6 chondrite: Additional evidence for large shielding

The cosmic ray produced Ar-36/Ar-38 ratio measured in iron meteorites is about 0.65, but is not well determined for stone meteorites due to the common presence of trapped Ar or absorbed atmospheric Ar in bulk analysis. Almost all single-extraction measurements of stones give Ar-36/Ar-38 ratios intermediate between the trapped and air values of 5.3 and the expected cosmogenic value of about 0.65. The isotopic composition of Ar was measured for stepwise temperature release of both chondritic and melt portions of Chico. The Chico data suggest that for large chondrites, the cosmogenic Ar-36/Ar-38 ratio may well be higher than 0.65, and therefore the procedure of correcting bulk analysis results may underestimate the concentration of cosmogenic Ar-38. In this context we note that in analysis of many Antarctic chondrites observed that determined amounts of cosmogenic Ar-38 averaged about 13 percent too low in comparison to that expected from measurements of other cosmogenic species.

Garrison, D. H.↗

Low Cost Dewatering of Waste Slurries

The U.S. Bureau of Mines has developed a technique for dewatering mineral waste slurries which utilizes polymer and a static screen. A variety of waste slurries from placer gold mines and crushed stone operations have been successfully treated using the system. Depending on the waste, a number of polymers have been used successfully with polymer costs ranging from $0.05 to $0.15 per 1,000 gal treated. The dewatering is accomplished using screens made from either ordinary window screen or wedge wire. The screens used are 8 ft wide and 8 ft long. The capacity of the screens varies from 3 to 7 gpm/sq. ft. The water produced is acceptable for recycling to the plant or for discharge to the environment. For example, a fine grain dolomite waste slurry produced from a crushed stone operation was dewatered from a nominal 2.5 pct solids to greater than 50 pct solids using $0.10 to $0.15 worth of polymer per 1,000 gal of slurry. The resulting waste water had a turbidity of less than 50 NTU and could be discharged or recycled. The paper describes field tests conducted using the polymer-screen dewatering system.

Peterson, J. B.↗

Do SiC grains in Orgueil differ from those in Murchison?

Studies of individual presolar SiC grains have shown that most are enriched in Si-29, Si-30, and C-13, and depleted in N-15, compared to solar-system abundances and that many have large excesses of Mg-26, most plausibly from in situ decay of Al-26. Stone et al., observed that Si from a family of platy SiC grains define a linear array on a 3-isotope plot that does not pass through normal solar-system Si. In contrast, Si-isotope data from over 100 3-4 micron SiC grains from Murchison from an elongate ellipse enclosing the Stone et al. linear array but also including 'normal' solar-system Si. To investigate whether this difference in Si isotopes indicates different populations of SiC in the two meteorites and to improve the characterization of Orgueil SiC, we used the PANURGE ion microprobe to measure Si, C, N, and Mg isotopes and Al and Na concentrations in a suite of 2-5 micron SiC grains from a new sample of Orgueil.

Huss, Gary R.↗

Durable High-Density Data Storage

The focus ion beam (FIB) micromilling process for data storage provides a new non-magnetic storage method for archiving large amounts of data. The process stores data on robust materials such as steel, silicon, and gold coated silicon. The storage process was developed to provide a method to insure the long term storage life of data. We estimate that the useful life of data written on silicon or gold-coated silicon to be on the order of a few thousand years without the need to rewrite the data every few years. The process uses an ion beam to carve material from the surface, much like stone cutters in ancient civilizations removed material from stone. The deeper the information is carved into the media, the longer the expected life of the information. The process can record information in three formats: (1) binary at densities of 23 Gbits/square inch, (2) alphanumeric at optical or non-optical density, and (3) graphical at optical and non-optical density. The formats can be mixed on the same media; and thus, it is possible to record, in a human-viewable format, instructions that can be read using an optical microscope. These instructions provide guidance on reading the remaining higher density information.

Lamartine, Bruce C.↗

The Origin of Tektites

Tektites are probably extraterrestrial, rather than the result of heating some terrestrial materials, because they are a chemically homogeneous group with definite peculiarities (high silica, excess of alkaline earths over alkalis, excess of potash over soda, absence of water), and because some of them (the australites) appear to have undergone ablation in flight through the atmosphere. Since comparatively slow heating is required to explain the liquefaction of the tektite material, it is suggested that the tektites arrived along orbits which were nearly parallel to the surface of the earth, and which resulted from the decay of the orbit of a natural satellite. The great meteor procession of February 9, 1913, is an example of such an object. Comparison with the reentry phenomena of the artificial satellite 1957 Beta suggests that the 1913 shower consisted of a single large stone weighing about 400 kilograms, and a few dozen smaller bodies weighing about 40 grams each, formed by ablation from the larger body. It is shown that under the observed conditions considerable liquid flow would be expected in the stone, which would be heated to about 2100 K. Objects falling from such a shower near the perigee point of the orbit would have a considerable distribution along the orbit as a result of slight variations in height or drag coefficient. The distribution in longitude would be made wider by the turning of the earth under the orbit during the time of fall. The ultimate source of the body which produces a tektite shower is probably the moon, which appears, by virtue of its polarization and the phase distribution of the returned light, to contain high-silica materials. It is suggested that the Igast object alleged to have fallen in 1855 is in fact genuine and represents an unmelted portion of the lunar crust.

OKeefe, J. A.↗

Voyager Briefing: Expectations of the Neptune Encounter

This NASA KSC video release presents a news briefing held Aug. 4, 1989 at NASA Headquarters three weeks after Voyager 2's official "encounter" with Neptune began. The video is comprised of two slide presentations followed by a short question and answer period. The press conference is moderated by Charles Redmond, (NASA Public Affairs), includes an introduction by Dr. Geoffrey A Briggs (Dir., Solar System Exploration Div.), and features Norman R. Haynes (Voyager Project Manager, JPL) and Dr. Edward C. Stone (Voyager Project Scientist, Cal Tech). Mr. Haynes' presentation centers on Voyager's history, engineering changes, and spacecraft trajectories while Dr. Stone presents the scientific aspects of Voyager, including the 11 scientific investigations planned for the mission, instruments used, and imaging techniques.

Source record↗

Dietary Sodium Effects on Bone Loss and Calcium Metabolism During Bed Rest

The acceleration of age-related bone loss is one of the most detrimental effects of space flight. The ability to understand and counteract this loss will be critical for crew health and safety during and after long-duration missions. Studies in healthy ambulatory individuals have linked high salt (sodium) diets, hypercalciuria, and increased renal stone risk. Dietary salt may modulate bone loss through changes in calcium metabolism and the calcium endocrine system. The research proposed here will determine the role of dietary salt in the loss of bone during simulated space flight. Calcium metabolism will be determined through calcium kinetics studies, endocrine and biochemical measurements; and estimates of the mass, distribution and mechanical properties of bone, in subjects fed low (100 mmol sodium/day) or high (250 mmol sodium/day) levels of dietary salt during 28 days of headdown tilt bedrest. This research addresses the role of dietary salt in the loss of bone and calcium in space flight, and integrates the changes in calcium metabolism with those occurring in other physiologic systems. These data will be critical for both countermeasure development, and in determination of nutritional requirements for extended-duration space flight. The potential countermeasures resulting from this research will reduce health risks due to acceleration of age-related osteoporosis and increased risk of renal stone formation..

Smith, Scott M.↗

Aviation Simulators for the Desktop: Panel and Demonstrations

Panel Members are: Christine M. Mitchell (Georgia Tech), Michael T. Palmer (NASA Langley), Greg Pisani (NASA Ames), and Amy R. Pritchett (MIT). The Panel members are affiliated with aviation human factors groups from NASA Ames, NASA Langley, MITCHELL Department of Aerospace and Aeronautical Engineering, and Georgia Technics Center for Human-Machine Systems Research. Panelists will describe the simulator(s) used in their respective institutions including a description of the FMS aircraft models, software, hardware, and displays. Panelists will summarize previous, on-going, and planned empirical studies conducted with the simulators. Greg Pisanich will describe two NASA Ames simulation systems: the Stone Soup Simulator (SSS), and the Airspace Operations Human Factors Simulation Laboratory. The the Stone Soup Simulator is a desktop-based, research flight simulator that includes mode control, flight management, and datalink functionality. It has been developed as a non-proprietary simulator that can be easily distributed to academic and industry researchers who are collaborating on NASA research projects. It will be used and extended by research groups represented by at least two panelists (Mitchell and Palmer). The Airspace Operations Simulator supports the study of air traffic control in conjunction with the flight deck. This simulator will be used provide an environment in which many AATT and free flight concepts can be demonstrated and evaluated. Mike Palmer will describe two NASA Langley efforts: The Langley Simulator and MD-11 extensions to the NASA Amesbury simulator. The first simulator is publicly available and combines a B-737 model with a high fidelity flight management system. The second simulator enhances the S3 simulator with MD-11 electronic flight displays together with modifications to the flight and FMS models to emulate MD-11 dynamics and operations. Chris Mitchell will describe GT-EFIRT (Georgia Tech-Electronic Flight Instrument Research Tool) and B-757 enhancements to the NASA Ames S3. GT-EFIRT is a medium fidelity simulator used to conduct preliminary studies of the CATS (crew activity tracking system). Like the Langley efforts with S3, the Georgia Tech enhancements will allow it to emulate the dynamics and operations of a widely used glass cockpit. Amy Pritchett will describe the MIT simulator(s) that have been used in a range of research investigating cockpit displays, warning devices, and flight deck-ATC interaction.

Pisanich, Greg↗

New Approaches for Exploration Beyond Low Earth Orbit

Through the work of the NASA Exploration Team (NEXT), innovations in mission architectures have been developed. Missions beyond low Earth orbit have been dramatically simplified through new combinations in the application of advanced technologies and mission design. These concepts enable a stepping stone approach to discovery driven, technology enabled exploration. The architectures have evolved from the interest in easily reaching the poles of the moon, to take advantage of the water ice that is believed to exist in the permanently dark craters. The Polar Regions also have areas that are consistently sunlit, providing a constant source of power. By staging these missions from the Earth-Moon Lagrange point, L1, other sites on the lunar surface can be reached as easily as the polar sites. Through studying this approach to lunar exploration, and combining new trajectory approaches the staging of other missions from L1 has begun to look attractive. The possibilities of missions include the assembly and maintenance of arrays of telescopes for emplacement at the Earth-Sun L2, and travel to Mars. The resulting numbers and masses of vehicles required are greatly reduced. Vehicle design concepts are developed for proof of concept, to validate mission approaches and understand the value of new technologies. The stepping stone approach employs an incremental buildup of capabilities; allowing for decision points on exploration objectives. It enables testing of technologies to achieve greater reliability and understanding of costs for the next steps in exploration.

Cooke, D. R.↗

Innovations in mission architectures for exploration beyond low Earth orbit

Through the application of advanced technologies and mission concepts, architectures for missions beyond Earth orbit have been dramatically simplified. These concepts enable a stepping stone approach to science driven; technology enabled human and robotic exploration. Numbers and masses of vehicles required are greatly reduced, yet the pursuit of a broader range of science objectives is enabled. The scope of human missions considered range from the assembly and maintenance of large aperture telescopes for emplacement at the Sun-Earth libration point L2, to human missions to asteroids, the moon and Mars. The vehicle designs are developed for proof of concept, to validate mission approaches and understand the value of new technologies. The stepping stone approach employs an incremental buildup of capabilities, which allows for future decision points on exploration objectives. It enables testing of technologies to achieve greater reliability and understanding of costs for the next steps in exploration. c2003 American Institute of Aeronautics and Astronautics. Published by Elsevier Science Ltd. All rights reserved.

United States National Aeronautics and Space Admin↗

A simple method for quantitating the propensity for calcium oxalate crystallization in urine

To assess the propensity for spontaneous crystallization of calcium oxalate in urine, the permissible increment in oxalate is calculated. The previous method required visual observation of crystallization with the addition of oxalate, this warranted the need for a large volume of urine and a sacrifice in accuracy in defining differences between small incremental changes of added oxalate. Therefore, this method has been miniaturized and spontaneous crystallization is detected from the depletion of radioactive oxalate. The new "micro" method demonstrated a marked decrease (p < 0.001) in the permissible increment in oxalate in urine of stone formers versus normal subjects. Moreover, crystallization inhibitors added to urine, in vitro (heparin or diphosphonate) or in vivo (potassium citrate administration), substantially increased the permissible increment in oxalate. Thus, the "micro" method has proven reliable and accurate in discriminating stone forming from control urine and in distinguishing changes of inhibitory activity.

NASA Discipline Regulatory Physiology↗

Contribution of dietary oxalate to urinary oxalate excretion

BACKGROUND: The amount of oxalate excreted in urine has a significant impact on calcium oxalate supersaturation and stone formation. Dietary oxalate is believed to make only a minor (10 to 20%) contribution to the amount of oxalate excreted in urine, but the validity of the experimental observations that support this conclusion can be questioned. An understanding of the actual contribution of dietary oxalate to urinary oxalate excretion is important, as it is potentially modifiable. METHODS: We varied the amount of dietary oxalate consumed by a group of adult individuals using formula diets and controlled, solid-food diets with a known oxalate content, determined by a recently developed analytical procedure. Controlled solid-food diets were consumed containing 10, 50, and 250 mg of oxalate/2500 kcal, as well as formula diets containing 0 and 180 mg oxalate/2500 kcal. Changes in the content of oxalate and other ions were assessed in 24-hour urine collections. RESULTS: Urinary oxalate excretion increased as dietary oxalate intake increased. With oxalate-containing diets, the mean contribution of dietary oxalate to urinary oxalate excretion ranged from 24.4 +/- 15.5% on the 10 mg/2500 kcal/day diet to 41.5 +/- 9.1% on the 250 mg/2500 kcal/day diet, much higher than previously estimated. When the calcium content of a diet containing 250 mg of oxalate was reduced from 1002 mg to 391 mg, urinary oxalate excretion increased by a mean of 28.2 +/- 4.8%, and the mean dietary contribution increased to 52.6 +/- 8.6%. CONCLUSIONS: These results suggest that dietary oxalate makes a much greater contribution to urinary oxalate excretion than previously recognized, that dietary calcium influences the bioavailability of ingested oxalate, and that the absorption of dietary oxalate may be an important factor in calcium oxalate stone formation.

Non-NASA Center↗