Search NASA⌕ Search

SEARCH · Search NASA

Results for “Scattering Matrix”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

The vector magnetograph of the Sayan Solar Observatory

The problem of choosing an optimum scheme for the electrooptical analyzer of polarization and related control principles are discussed. An electrooptical deflector, which is advantageously used to employ a single photodetector and to remove systematic errors inherent in magnetographs with two photodetectors in the wings of the line is discussed, as well as adjustment errors of optical elements of the polarization analyzer and errors of control voltages. A method for measuring the telescope's polarization matrix, reduction of magnetographic measurements for instrumental polarization and calibration of magnetograph channels are examined. Questions of evaluating scattered light and of reducing magnetic field measurements are also considered as a computational procedure for the magnetic field vector parameters is briefly outlined. Computer control of the solar magnetograph and of the processing and control system software is discussed.

Grigoryev, V. M.↗
NASA NTRS1990

Characterization of unnotched SCS-6/Ti-15-3 metal matrix composites at 650 C

Ti-15-3 reinforced with SCS-6 silicon carbide fibers, in five different layups, was tested at 650 C to determine monotonic and fatigue strengths, basic mechanical properties, and damage initiation and progression. The elevated temperature results were compared to those obtained at room temperature. Analytical predictions were made of the monotonic stress-strain response as well as cyclic stress-strain hysteresis. The fiber reinforcement was found to significantly increase the static and fatigue strengths of the laminates over that of the matrix material at elevated temperature while the increase was insignificant at room temperature. Initial damage, in either the fibers or the matrix, was partitioned as a function of the life and applied strain range in the constituents. High strains and short lives resulted in multiple fiber failure with no signs of matrix fatigue cracking. Low strains and long lives resulted in extensive matrix cracking and no fiber breaks away from the fracture surface. At 650 C the matrix was too weak to cause fiber-matrix interface failure prior to matrix yielding. Laminate fatigue lives were hypothesized to be a function of the 0 deg fiber stress. More scatter was found in the 0 deg fiber stress vs. high temperature fatigue life data than for the room temperature data. An initial unloading modulus that was greater than the initial loading modulus was observed in the elevated temperature fatigue tests.

Pollock, W. D.↗
NASA NTRS1992

Characterization of unnotched SCS-6/Ti-15-3 metal matrix composites at 650 C

Ti-15-3 reinforced with SCS-6 silicon carbide fibers, in five different layups, was tested at 650 C to determine monotonic and fatigue strengths, basic mechanical properties, and damage initiation and progression. The elevated temperature results were compared to those obtained at room temperature. Analytical predictions were made of the monotonic stress-strain response as well as cyclic stress-strain hysteresis. The fiber reinforcement was found to significantly increase the static and fatigue strengths of the laminates over that of the matrix material at elevated temperature while the increase was insignificant at room temperature. Initial damage, in either the fibers or the matrix, was partitioned as a function of the life and applied strain range in the constituents. High strains and short lives resulted in multiple fiber failure with no signs of matrix fatigue cracking. Low strains and long lives resulted in extensive matrix cracking and no fiber breaks away from the fracture surface. At 650 C the matrix was too weak to cause fiber-matrix interface failure prior to matrix yielding. Laminate fatigue lives were hypothesized to be a function of the 0 deg fiber stress. More scatter was found in the 0 deg fiber stress vs. high temperature fatigue life data than for the room temperature data. An initial unloading modulus that was greater than the initial loading modulus was observed in the elevated temperature fatigue tests.

Pollock, William D.↗
NASA NTRS1992

Electromagnetic scattering and radiation from microstrip patch antennas and spirals residing in a cavity

A new hybrid method is presented for the analysis of the scattering and radiation by conformal antennas and arrays comprised of circular or rectangular elements. In addition, calculations for cavity-backed spiral antennas are given. The method employs a finite element formulation within the cavity and the boundary integral (exact boundary condition) for terminating the mesh. By virtue of the finite element discretization, the method has no restrictions on the geometry and composition of the cavity or its termination. Furthermore, because of the convolutional nature of the boundary integral and the inherent sparseness of the finite element matrix, the storage requirement is kept very low at O(n). These unique features of the method have already been exploited in other scattering applications and have permitted the analysis of large-size structures with remarkable efficiency. In this report, we describe the method's formulation and implementation for circular and rectangular patch antennas in different superstrate and substrate configurations which may also include the presence of lumped loads and resistive sheets/cards. Also, various modelling approaches are investigated and implemented for characterizing a variety of feed structures to permit the computation of the input impedance and radiation pattern. Many computational examples for rectangular and circular patch configurations are presented which demonstrate the method's versatility, modeling capability and accuracy.

Volakis, J. L.↗
NASA NTRS1985

A General-applications Direct Global Matrix Algorithm for Rapid Seismo-acoustic Wavefield Computations

A new matrix method for rapid wave propagation modeling in generalized stratified media, which has recently been applied to numerical simulations in diverse areas of underwater acoustics, solid earth seismology, and nondestructive ultrasonic scattering is explained and illustrated. A portion of recent efforts jointly undertaken at NATOSACLANT and NORDA Numerical Modeling groups in developing, implementing, and testing a new fast general-applications wave propagation algorithm, SAFARI, formulated at SACLANT is summarized. The present general-applications SAFARI program uses a Direct Global Matrix Approach to multilayer Green's function calculation. A rapid and unconditionally stable solution is readily obtained via simple Gaussian ellimination on the resulting sparsely banded block system, precisely analogous to that arising in the Finite Element Method. The resulting gains in accuracy and computational speed allow consideration of much larger multilayered air/ocean/Earth/engineering material media models, for many more source-receiver configurations than previously possible. The validity and versatility of the SAFARI-DGM method is demonstrated by reviewing three practical examples of engineering interest, drawn from ocean acoustics, engineering seismology and ultrasonic scattering.

Schmidt, H.↗
NASA NTRS1976

Optical properties of NaCl-NaF eutectics

A new concept is advanced to explain the phenomenon of transmittance versus far-field infrared wavelength of the directionally solidified NaCl-NaF eutectic in terms of the two-dimensional Bragg Scattering and the polarization effect of Rayleigh scattering. This concept can be applied to other eutectic systems as long as the index of refraction of the matrix over a range of wavelength is known. Experimental data are in excellent agreement with the theoretical prediction.

Yue, A. S.↗
NASA NTRS2003

Collective Excitations in InAs Well Intersubband Transitions

Intersubband transitions in semiconductor quantum well are studied using a density matrix theory that goes beyond the Hartree-Fock approximation by including the full second order electron-electron scattering terms in the polarization equation for the first time. Even though the spectral features remain qualitatively similar to the results obtained with dephasing rate approximation, significant quantitative changes result from such a more detailed treatment of dephasing. More specifically, we show how the interplay of the two fundamental collective excitations, the Fermi-edge singularity and the intersubband plasmon, leads to significant changes in lineshape as the electron density varies.

Li, Jian-Zhong↗
NASA NTRS2019

Comprehensive Thematic T-Matrix Reference Database: a 2017-2019 Update

Since its inception in the mid-1960s, the T-matrix method has been one of the most versatile and efficient numerically exact computer solvers of the time-harmonic macroscopic Maxwell equations. It has been widely used for the computation of electromagnetic scattering by single and composite particles, discrete random media, periodic structures (including metamaterials), and particles in the vicinity of plane or rough interfaces separating media with different refractive indices. This compilation is the ninth update to the comprehensive thematic database of peer-reviewed T-matrix publications initiated in 2004 and lists relevant publications that have appeared since 2017. It also includes a few earlier publications that have so far been overlooked.

Michael I Mishchenko↗
NASA NTRS1992

Reflection and emission properties on Venus - Alpha Regio

Procedures developed from Hagfors' (1964) scattering model have been used with success to extract various properties (reflectivity, emissivity, slope, etc.) from both Pioneer Venus and Magellan data. However, under certain circumstances, such as physically rough areas or areas of nonhomogeneous composition, Hagfors' model may lead to serious errors in the interpretation of radar and radiometry data. The Magellan-derived surface properties are examined for some areas of below average emissivity in Alpha Regio and in an area to the east of Alpha, Crater Stuart, in order to determine if Hagfors' model is applicable. Methods of classical multiple scattering theory are also applied to show that enhanced radar backscattering and depressed thermal emission can be expected with a matrix of silicic or mafic rocks embedded in low loss soils.

Tryka, Kimberly A.↗
NASA NTRS1997

Electron Excitation Cross Sections for the S II Transitions: 3s(exp 2)3p(exp 3) 4S(exp o) approaches 3s(exp 2)3p(exp 3) 2D(exp o), 2P(exp o), and 3s3p(exp 4) 4P

Experimental and theoretical collisional excitation cross sections are reported for the transitions 3s(exp 2)3p(exp 3)4S(exp o) approaches 3s(exp 2)3p(exp 3) 2D(exp o), 2P(exp o), and 3s3P(exp 4) 4P in S II. The transition wavelengths (energies) are 6716 A (1.85 eV), 4069 A (3.05 eV), and 1256 A (9.87 eV), respectively. In the experiments, use is made of the energy-loss merged-beams method. The metastable fraction of the S II beam was assessed and minimized. The contribution of elastically scattered electrons was reduced by the use of a lowered solenoidal magnetic field and a modulated radio-frequency voltage on the analyzing plates and by retarding grids to reject the elastically scattered electrons with larger Larmor radii. For each transition, comparisons are made among experiments, the new 19 state R-matrix calculation, and three other close-coupling calculations.

Liao, C.↗
NASA NTRS2007

Investigation of Synthetic Mg(1.3)V(1.7)O4 Spinel with MgO Inclusions: Case Study of a Spinel with an Apparently occupied Interstitial Site

A magnesium vanadate spinel crystal, ideally MgV2O4, synthesized at 1 bar, 1200 C and equilibrated under FMQ + 1.3 log f(sub o2) condition, was investigated using single-crystal X-ray diffraction, electron microprobe, and electron backscatter (EBSD). The initial X-ray structure refinements gave tetrahedral and octahedral site occupancies, along with the presence of 0.053 apfu Mg at an interstitial octahedral site . Back-scattered electron (BSE) images and electron microprobe analyses revealed the existence of an Mg-rich phase in the spinel matrix, which was too small (less than or equal to 3microns) for an accurate chemical determination. The EBSD analysis combined with X-ray energy dispersive spectroscop[y (XEDS) suggested that the Mg-rich inclusions are periclase oriented coherently with the spinel matrix. The final structure refinements were optimized by subtracting the X-ray intensity contributions (approx. 9%) of periclase reflections, which eliminated the interstitial Mg. This study provides insight into possible origins of refined interstitial cations reported in the the literature for spinel, and points to the difficulty of using only X-ray diffraction data to distinguish a spinel with interstitial cations from one with coherently oriented MgO inclusions.

Uchida, Hinako↗
NASA NTRS1982

Wave scattering from a periodic dielectric surface for a general angle of incidence

Electromagnetic waves scattered from a periodic dielectric and perfectly conducting surface are studied for a general angle of incidence. It is shown that the one-dimensional corrugated surface can be solved by using two scalar functions: the components of the electric and magnetic fields along the row direction of the surface, and appropriate boundary conditions to obtain simple matrix equations. Results are compared to the case where the incident angle wave vector is perpendicular to the row direction. Numerical results demonstrate that energy conservation and reciprocity are obeyed for scattering by sinusoidal surfaces for the general case, which checks the consistency of the formalism.

Chuang, S. L.↗
NASA NTRS1991

Backscattering by nonspherical particles - A review of methods and suggested new approaches

Scattering of electromagnetic radiation near the backward direction is more sensitive to particle shape than scattering near the forward direction. Mie theory is therefore of dubious applicability to predicting backscattering by atmospheric particles known to be irregular or to inverting measurements on such particles. An irregular particle is one with an uncertain shape. In the face of uncertainty one must adopt a statistical approach in which scattering properties of ensembles are determined. To obtain ensemble averages, a basis is needed for averaging over a set of electromagnetic microstates. Ensemble averages based on the Rayleigh theory for small ellipsoids and on the T matrix method for spheroids agree better with measurements than Mie theory does. The coupled-dipole method also provides a basis for ensemble averaging. This method also leads to a simple physical interpretation of why backscattering is so sensitive to particle shape and can be used to calculate scattering by one- and two-dimensional analogs to three-dimensional irregular particles.

Bohren, Craig F.↗
NASA NTRS1973

Microstructural study of the nickel-base alloy WAZ-20 using qualitative and quantitative electron optical techniques

The NASA nickel-base alloy WAZ-20 was analyzed by advanced metallographic techniques to qualitatively and quantitatively characterize its phases and stability. The as-cast alloy contained primary gamma-prime, a coarse gamma-gamma prime eutectic, a gamma-fine gamma prime matrix, and MC carbides. A specimen aged at 870 C for 1000 hours contained these same constituents and a few widely scattered high W particles. No detrimental phases (such as sigma or mu) were observed. Scanning electron microscope, light metallography, and replica electron microscope methods are compared. The value of quantitative electron microprobe techniques such as spot and area analysis is demonstrated.

Young, S. G.↗
NASA NTRS1987

Hypercube matrix computation task

The Hypercube Matrix Computation (Year 1986-1987) task investigated the applicability of a parallel computing architecture to the solution of large scale electromagnetic scattering problems. Two existing electromagnetic scattering codes were selected for conversion to the Mark III Hypercube concurrent computing environment. They were selected so that the underlying numerical algorithms utilized would be different thereby providing a more thorough evaluation of the appropriateness of the parallel environment for these types of problems. The first code was a frequency domain method of moments solution, NEC-2, developed at Lawrence Livermore National Laboratory. The second code was a time domain finite difference solution of Maxwell's equations to solve for the scattered fields. Once the codes were implemented on the hypercube and verified to obtain correct solutions by comparing the results with those from sequential runs, several measures were used to evaluate the performance of the two codes. First, a comparison was provided of the problem size possible on the hypercube with 128 megabytes of memory for a 32-node configuration with that available in a typical sequential user environment of 4 to 8 megabytes. Then, the performance of the codes was anlyzed for the computational speedup attained by the parallel architecture.

Calalo, R.↗
NASA NTRS1987

Effective propagation constants in dense random media under effective medium approximation

The effective medium approximation is applied to study the effective propagation constants in a dense random medium. The dyadic Green's function is introduced to establish the effective medium approximation formalism for electromagnetic waves. The multiple scattering equations and the Lippmann-Schwinger equations for the transition operator are obtained in the configuration average form. The dispersion equations of multiple scattering is derived by using a standard method in quantum mechanics. To obtain an expression for the effective propagation constants the matrix elements of the configuration average dyadic transiton operator are calculated in momentum representation. Numerical illustations are carried out to demonstrate the difference in the effective propagation constants between the use of this approximation and the well-known quasi-crystalline approximation. A comparison is made with measured loss tangent in dry snow.

Zhu, P. Y.↗
NASA NTRS1988

An empirical model for polarized and cross-polarized scattering from a vegetation layer

An empirical model for scattering from a vegetation layer above an irregular ground surface is developed in terms of the first-order solution for like-polarized scattering and the second-order solution for cross-polarized scattering. The effects of multiple scattering within the layer and at the surface-volume boundary are compensated by using a correction factor based on the matrix doubling method. The major feature of this model is that all parameters in the model are physical parameters of the vegetation medium. There are no regression parameters. Comparisons of this empirical model with theoretical matrix-doubling method and radar measurements indicate good agreements in polarization, angular trends, and k sub a up to 4, where k is the wave number and a is the disk radius. The computational time is shortened by a factor of 8, relative to the theoretical model calculation.

Liu, H. L.↗
NASA NTRS1988

Quantum mechanical algebraic variational methods for inelastic and reactive molecular collisions

The quantum mechanical problem of reactive or nonreactive scattering of atoms and molecules is formulated in terms of square-integrable basis sets with variational expressions for the reactance matrix. Several formulations involving expansions of the wave function (the Schwinger variational principle) or amplitude density (a generalization of the Newton variational principle), single-channel or multichannel distortion potentials, and primitive or contracted basis functions are presented and tested. The test results, for inelastic and reactive atom-diatom collisions, suggest that the methods may be useful for a variety of collision calculations and may allow the accurate quantal treatment of systems for which other available methods would be prohibitively expensive.

Schwenke, David W.↗