Search NASA⌕ Search

SEARCH · Search NASA

Results for “Segmentation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

A translational registration system for LANDSAT image segments

The use of satellite images obtained from various dates is essential for crop forecast systems. In order to make possible a multitemporal analysis, it is necessary that images belonging to each acquisition have pixel-wise correspondence. A system developed to obtain, register and record image segments from LANDSAT images in computer compatible tapes is described. The translational registration of the segments is performed by correlating image edges in different acquisitions. The system was constructed for the Burroughs B6800 computer in ALGOL language.

Parada, N. D. J.↗
NASA NTRS1983

Segmented vortex flaps

Segmented vortex flaps were suggested as a means of delaying the vortex spill-over causing thrust loss over the outboard region of single-panel flaps. Also proposed was hinge-line setback for exploiting leading-edge suction in conjunction with vortex flaps to improve the overall thrust per unit flap area. These two concepts in combination were tested on a 60-deg cropped delta wing model. Significant improvement in flap efficiency was indicated by a reduction of the flap/wing area from 11.4% of single-panel flap to 6.3% of a two segment delta flap design, with no lift/drag penalty at lift coefficients between 0.5 and 0.7. The more efficient vortex flap arrangement of this study should benefit the performance attainable with flaps of given area on wings of moderate leading-edge sweep.

Rao, D. M.↗
NASA NTRS1982

Analysis, design, and test of a graphite/polyimide Shuttle orbiter body flap segment

For future missions, increases in Space Shuttle orbiter deliverable and recoverable payload weight capability may be needed. Such increases could be obtained by reducing the inert weight of the Shuttle. The application of advanced composites in orbiter structural components would make it possible to achieve such reductions. In 1975, NASA selected the orbiter body flap as a demonstration component for the Composite for Advanced Space Transportation Systems (CASTS) program. The progress made in 1977 through 1980 was integrated into a design of a graphite/polyimide (Gr/Pi) body flap technology demonstration segment (TDS). Aspects of composite body flap design and analysis are discussed, taking into account the direct-bond fibrous refractory composite insulation (FRCI) tile on Gr/Pi structure, Gr/Pi body flap weight savings, the body flap design concept, and composite body flap analysis. Details regarding the Gr/Pi technology demonstration segment are also examined.

Graves, S. R.↗
NASA NTRS1983

Negatively supercoiled simian virus 40 DNA contains Z-DNA segments within transcriptional enhancer sequences

Three 8-base pair (bp) segments of alternating purine-pyrimidine from the simian virus 40 enhancer region form Z-DNA on negative supercoiling; minichromosome DNase I-hypersensitive sites determined by others bracket these three segments. A survey of transcriptional enhancer sequences reveals a pattern of potential Z-DNA-forming regions which occur in pairs 50-80 bp apart. This may influence local chromatin structure and may be related to transcriptional activation.

Nordheim, A.↗
NASA NTRS1983

Autoregressive Models for Use in Scene Segmentation

A scene segmentation approach is presented which is based on generating autoregressive field models for each scene component (class) from its a priori spatial statistics. A methodology is also described for using these models in achieving optimal segmentation of a scene. The derivations are presented for the case of single band imagery, however, the method is believed to be extendable to multispectral data.

Naraghi, M.↗
NASA NTRS1983

Segmentation of remotely sensed data using parallel region growing

The improved spatial resolution of the new earth resources satellites will increase the need for effective utilization of spatial information in machine processing of remotely sensed data. One promising technique is scene segmentation by region growing. Region growing can use spatial information in two ways: only spatially adjacent regions merge together, and merging criteria can be based on region-wide spatial features. A simple region growing approach is described in which the similarity criterion is based on region mean and variance (a simple spatial feature). An effective way to implement region growing for remote sensing is as an iterative parallel process on a large parallel processor. A straightforward parallel pixel-based implementation of the algorithm is explored and its efficiency is compared with sequential pixel-based, sequential region-based, and parallel region-based implementations. Experimental results from on aircraft scanner data set are presented, as is a discussioon of proposed improvements to the segmentation algorithm.

Tilton, J. C.↗
NASA NTRS1984

Scene segmentation through region growing

A computer algorithm to segment Landsat Thematic Mapper (TM) images into areas representing surface features is described. The algorithm is based on a region growing approach and uses edge elements and edge element orientation to define the limits of the surface features. Adjacent regions which are not separated by edges are linked to form larger regions. Some of the advantages of scene segmentation over conventional TM image extraction algorithms are discussed, including surface feature analysis on a pixel-by-pixel basis, and faster identification of the pixels in each region. A detailed flow diagram of region growing algorithm is provided.

Latty, R. S.↗
NASA NTRS1986

Measurement and prediction of flow through a replica segment of a mildly atherosclerotic coronary artery of man

Pressure distributions were measured along a hollow vascular axisymmetric replica of a segment of the left circumflex coronary artery of man with mildly atherosclerotic diffuse disease. A large range of physiological Reynolds numbers from about 60 to 500, including hyperemic response, was spanned in the flows investigation using a fluid simulating blood kinematic viscosity. Predicted pressure distributions from the numerical solution of the Navier-Stokes equations were similar in trend and magnitude to the measurements. Large variations in the predicted velocity profiles occurred along the lumen. The influence of the smaller scale multiple flow obstacles along the wall (lesion variations) led to sharp spikes in the predicted wall shear stresses. Reynolds number similarity was discussed, and estimates of what time averaged in vivo pressure drop and shear stress might be were given for a vessel segment.

Back, L. H.↗
NASA NTRS1986

Theoretical analysis of segmented Wolter/LSM X-ray telescope systems

The Segmented Wolter I/LSM X-ray Telescope, which consists of a Wolter I Telescope with a tilted, off-axis convex spherical Layered Synthetic Microstructure (LSM) optics placed near the primary focus to accommodate multiple off-axis detectors, has been analyzed. The Skylab ATM Experiment S056 Wolter I telescope and the Stanford/MSFC nested Wolter-Schwarzschild x-ray telescope have been considered as the primary optics. A ray trace analysis has been performed to calculate the RMS blur circle radius, point spread function (PSF), the meridional and sagittal line functions (LST), and the full width half maximum (PWHM) of the PSF to study the spatial resolution of the system. The effects on resolution of defocussing the image plane, tilting and decentrating of the multilayer (LSM) optics have also been investigated to give the mounting and alignment tolerances of the LSM optic. Comparison has been made between the performance of the segmented Wolter/LSM optical system and that of the Spectral Slicing X-ray Telescope (SSXRT) systems.

Shealy, D. L.↗
NASA NTRS1987

Structural design of an in-line bolted joint for the space shuttle solid rocket motor case segments

Results of a structural design study of an in-line bolted joint concept which can be used to assemble Space Shuttle Solid Rocket Motor (SRM) case segments are presented. Numerous parametric studies are performed to characterize the in-line bolted joint behavior as major design variables are altered, with the primary objective always being to keep the inside of the joint (where the O-rings are located) closed during the SRM firing. The resulting design has 180 1-inch studs, an eccentricity of -0.5 inch, a flange thickness of 3/4 inch, a bearing plate thickness of 1/4 inch, and the studs are subjected to a preload which is 70% of ultimate. The mass penalty per case segment joint for the in-line design is 346 lbm more than the weight penalty for the proposed capture tang fix.

Dorsey, John T.↗
NASA NTRS1986

Development of lightweight, glass mirror segments for the Large Deployable Reflector

Accomplishments in the development of lightweight, honeycomb-core, sandwich mirror blanks made of borosilicate and high-silica glasses at the University of Arizona for the Large Deployable Reflector program are described. In this paper, work spanning the last 2 years is reported, highlighting a new mirror blank fabrication technique that permits the fabrication of the honeycomb core integrally with the front and back plates of the blank in a single furnace cycle. Two types of mirror blanks made by this method, an off-axis, aspheric segment and a smaller Vycor circular piece, are described. The fabrication of two off-axis, aspheric mirror segments is also described. Cryogenic test results are included on the test of a 38-cm diameter, lightweight, honeycomb core, sandwich mirror made of Pyrex.

Melugin, R. K.↗
NASA NTRS1988

Numerical arc segmentation algorithm for a radio conference - A software tool for communication satellite systems planning

A detailed description of a Numerical Arc Segmentation Algorithm for a Radio Conference (NASARC) software package for communication satellite systems planning is presented. This software provides a method of generating predetermined arc segments for use in the development of an allotment planning procedure to be carried out at the 1988 World Administrative Radio Conference (WARC - 88) on the use of the GEO and the planning of space services utilizing GEO. The features of the NASARC software package are described, and detailed information is given about the function of each of the four NASARC program modules. The results of a sample world scenario are presented and discussed.

Whyte, W. A.↗
NASA NTRS1988

Poly(imide-siloxane) segmented copolymer structural adhesives prepared by bulk and solution thermal imidization

The improved properties that have been demonstrated through thermal solution imidization in the case of polyimides and poly(imide-siloxane) segmented copolymers suggests significant potential for application of these new materials. Specifically, the enhancement in solubility, moisture reduction, and processability observed through this solution technique is quite dramatic. Previous work has shown that the presence of low amounts of siloxane does not detract significantly from the lap shear strength of these materials to titanium in the case of bulk thermal imidization synthesis. In addition, the siloxane incorporation results in the added advantage of resistance to hot, wet environments. This added durability is presumably due to the hydrophobic siloxane segments preventing the uptake of water at the critical interphase between the adhesive and the adherend. This paper discusses the extension of this work to the solution imidization synthesis technique recently developed in our laboratory. Results dealing with the absolute bond strengths as well as durability and failure surface analysis will be presented.

Bott, R. H.↗
NASA NTRS1988

The influence of subsonic mission segments on the use of variable-sweep wings for high speed civil transport configurations

A Mach-3.0, 250-passenger, 6500-n. mi. range SST configuration's alternative use of fixed-planform or variable-sweep wings is presently evaluated, with a view to effects on aerodynamics, mission performance, and sizing. After preliminary design, the fixed and variable-wing configurations were resized to perform missions incorporating subsonic cruise segments of as much as 4000 n. mi.; the effect of subsonic segment length on design gross weight and block time was then ascertained. Due to the reduced supersonic efficiency of the variable-sweep aircraft, over one-half of the 6500-n. mi. mission would have to be flown subsonically for its sizing to reach a lower ramp weight than that of its fixed-geometry counterpart.

Martin, Glenn L.↗
NASA NTRS1988

PIPS: A Procedure for Interactive Pyramid Segmentation

The Procedure for Interactive Pyramid Segementation was designed to identify regions of spatially connected and spectrally homogeneous pixels in multispectral image data, and to allow these regions to be interactively manipulated without the use of processing parameters. The objective is to provide the user with the capability to easily extract and identify regions corresponding to target objects of interest. The approach is to segment a multispectral image into a set of regions and to allow the analyst to interactively refine the segmentation by direct manipulation. The user can elect to: interactively display maps of the spatial distribution of regions for any designated image subset; display the statistics of a given region; and label, merge, or split regions.

Wharton, S. W.↗
NASA NTRS1988

Cyclic loads tests of carbon involute solid rocket motor outer boot ring segments

The cyclic loads tests performed on the 30-in. segments of the DM-9 (Development Motor-9) configuration solid rocket outer boot ring are described. The tests found that the effect of the cyclic loadings on the structural integrity of the outer boot ring was negligible. The results are compared with a hand analysis of the strength of a 30-in. outer boot ring segment. Several phenomena of engineering interest are also described.

Ahmed, Rafiq↗
NASA NTRS1989

Optical testing of off-axis parabolic segments without auxiliary optical elements

The traditional optical test for an off-axis segment of a parabolic mirror utilizes an autocollimation flat and requires considerable test-bay space. Several other test configurations that will minimize space requirements are described. One method involves a null corrector, and three others require no auxiliary test optics. Combinations of the methods described will be useful in providing full independent evaluation of the figure of the segment under test.

Meinel, Aden B.↗