Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solidification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Effect of gravity on coupled convective and interfacial instabilities during directional solidification

Instabilities occurring during the directional constant-rate solidification of a dilute solution of tin in lead are investigated as a function of gravity with particular emphasis on small constant gravitational accelerations. Two types of instabilities have been identified: (1) convective type that corresponds to long wavelengths, and (2) morphological type that corresponds to short wavelengths. These instabilities are coupled but while the convective instabilities depend strongly on gravity, the morphological instabilities are practically independent of gravity. For low velocities, the convective instabilities occur at much lower solute concentrations than the morphological instabilities, whereas at high velocities the reverse is true.

Coriell, S. R.↗
NASA NTRS1982

Solidification phenomena of binary organic mixtures

The coalescence rates and motion of liquid bubbles in binary organic mixtures were studied. Several factors such as temperature gradient, composition gradient, interfacial tension, and densities of the two phases play important roles in separation of phases of immiscible liquids. An attempt was made to study the effect of initial compositions on separation rates of well-dispersed organic mixtures at different temperatures and, ultimately, on the homogeneity of solidification of the immiscible binary organic liquids. These organic mixtures serve as models for metallic pseudo binary systems under study. Two specific systems were investigated: ethyl salicylate - diethyl glycol and succinonitrile - water.

Chang, K.↗
NASA NTRS1982

Solidification of a binary mixture

The time dependent concentration and temperature profiles of a finite layer of a binary mixture are investigated during solidification. The coupled time dependent Stefan problem is solved numerically using an implicit finite differencing algorithm with the method of lines. Specifically, the temporal operator is approximated via an implicit finite difference operator resulting in a coupled set of ordinary differential equations for the spatial distribution of the temperature and concentration for each time. Since the resulting differential equations set form a boundary value problem with matching conditions at an unknown spatial point, the method of invariant imbedding is used for its solution.

Antar, B. N.↗
NASA NTRS1982

Containerless undercooling and solidification of bulk metastable Nb3Ge alloys

Experiments using containerless undercooling and low-gravity solidification of Nb(1-x)Ge(x) alloys for x=0.13-0.27 have been carried out in a 32-m drop-tube apparatus to study the feasibility of forming metastable Nb3Ge in bulk form. It is found that bulk samples (2-3 mm diam) of Nb-Ge alloys with 18-22% Ge can be undercooled by large amounts (300-500 K) and solidified in a containerless environment. Subsequent quenching of the solidified samples in oil helps preserve the metastable A-15 phase by removing the latent heat of fusion and quickly cooling the samples to a stable temperature below 1000 C. Even at an undercooling of less than 100 K, the superconducting transition temperature of the material is enhanced over the cast material by about 1 K.

Lacy, L. L.↗
NASA NTRS1982

Solidification process control for advanced superalloys

The importance of understanding and controlling the basic solidification process in high temperature alloy technology as applied to gas turbine engine production is discussed. Resultant tailoring of the superalloy macro- and microstructure offers significant potential for continued advances in superalloy use temperatures in turbine engines. Atomized superalloy powders, rapidly solidified superalloys, microstructural control, and advanced superalloys are discussed.

Hugh R. Gray↗
NASA NTRS1983

Optical observations of unidirectional solidification in microgravity

Optical interferometric, shadowgraph, and streak photographic methods are used to obtain temperature profiles, concentration gradients, and fluid velocities in NH4Cl-H2O metal-model solution during unidirectional solidification in microgravity. This study elucidates earlier low gravity suborbital rocket experiments and lays the groundwork for space shuttle experiments. The design and operation of the optical units are presented, and results are detailed to ground based experiments. The low gravity experiments were conducted using a KC-135 aircraft flying a parabolic trajectory.

Johnston, M. H.↗
NASA NTRS1983

Preliminary science report on the directional solidification of hypereutectic cast iron during KC-135 low-G maneuvers

An ADSS-P directional solidification furnace was reconfigured for operation on the KC-135 low-g aircraft. The system offers many advantages over quench ingot methods for study of the effects of sedimentation and convection on alloy formation. The directional sodification furnace system was first flown during the September 1982 series of flights. The microstructure of the hypereutectic cast iron sample solidified on one of these flights suggests a low-g effect on graphite morphology. Further experiments are needed to ascertain that this effect is due to low-gravity and to deduce which of the possible mechanisms is responsible for it.

Curreri, P. A.↗
NASA NTRS1982

The effects of C, P, and S on trace element partitioning during solidification in Fe-Ni alloys

Trace and minor element distributions in the iron meteorites are generally ascribed to partitioning during solidification of the parent body core or to partial melting within the parent body. A model involving fractional crystallization is considered. The model cannot account for differences between the measured values for the slopes on the log Ir-log Ni plots and the slopes predicted using experimentally determined distribution coefficients obtained in an investigation conducted by Goldstein and Friel (1978). The model has also other weaknesses. Part of the answer concerning the existing problems was provided by Narayan and Goldstein (1981, 1982). The present investigation is concerned with a further clarification of the effect of the minor elements P, S, and C on the distribution behavior of trace elements. Attention is given to measurements of the distribution coefficients for various elements (Ir, Ge, Ga, Au, Cu, Cr) in the presence of these minor elements.

Willis, J.↗
NASA NTRS1983

Finite-element methods for steady solidification problems

Four Galerkin finite-element methods are tested for solving the free-boundary problem that describes steady solidification. The formulations differ in the solution method used to account for the unknown shape of the melt/solid interface, in the interphase condition (either balance of heat flux or equilibrium of temperature) distinguished for locating the interface, and in the technique used for solving the systems of algebraic equations that result from the finite-element approximations. Methods that use the melting point isotherm to locate the melt/solid interface are found more accurate and efficient than formulations based on the interfacial energy balance. Solution by a Galerkin-Newton algorithm of the free-boundary problem transformed to a fixed domain is most efficient when the field problem in each phase is made nonlinear by including radiation from the melt and solid to the surroundings.

Ettouney, H. M.↗
NASA NTRS1982

Solidification studies of Nb-Ge alloys at large degrees of supercooling

A 32 meter evacuated drop tube has been used to investigate the solidification of Nb-Ge alloys after deep undercooling. Samples have been supercooled as much as 500 K below the liquidus by using free-fall conditions to eliminate crucible induced nucleation. Final microstructures are dependent on the quenching rates at the bottom of the drop tube with a striking extension of the beta phase solubility limit at the higher quenching rates.

Lacy, L. L.↗
NASA NTRS1982

Directional solidification and characterization of Hg(1-x)Cd(x)Te alloys

A series of Hg(1-x)Cd(x)Te alloy crystals was grown by high temperature gradient directional solidification at furnace translation rates ranging from 0.068 to 1.12 microns/s. For several ingots, the measured longitudinal compositional profiles were fitted to theoretical profiles to estimate the magnitude of D, the liquid HgTe-CdTe interdiffusion coefficient. The best-fit value of D was about 550,000 sq cm/s. The majority of the ingots showed significant radial compositional variations along the growth axis. These variations are attributed, at least in part, to fluid flows ahead of the growth interface. The results are discussed in terms of the heat transfer characteristics of the alloy/ampule/furnace system, and on the effects of these characteristics on the shape and stability of the growth interface in a 1-g environment.

Lehoczky, S. L.↗
NASA NTRS1982

Solidification of hypermonotectic Al-In alloys under microgravity conditions

Four samples of the Al-In system having monotectic and hypermonotectic compositions that were solidified under microgravity during the NASA-SPAR IX flight of January 20, 1981, are considered. The experimental thermal and physicochemical conditions that were actually achieved are analyzed. Radiographic and metallographic observations of the samples reveal a nonregular dispersed primary phase inside the monotectic matrix. These observations are discussed in relation to capillarity and solidification aspects. A key finding is the preservation of a certain degree of dispersion of the indium primary phase. This result differs fundamentally from the results obtained under microgravity conditions on the same system and compositions (Gelles and Markworth, 1980; Alborn and Loehberg, 1979). The results are seen as clearly establishing that the space environment can be used to obtain dispersed structures from hypermonotectic alloys.

Potard, C.↗
NASA NTRS1982

Gravitationally induced convection during directional solidification of off-eutectic Mn-Bi alloys

The effects of thermal and solute gradient, gravity induced convection during vertical directional solidification, on longitudinal macrosegregation of Bi and Mn rich off-eutectic starting compositions, has been studied as a function of composition, growth velocity and gravity vector orientation. Since the morphology of these alloys is characterized by an aligned, rodlike permanent magnet composite when grown cooperatively, the magnetic properties were used to measure composition segregation and the transition from dendritic to composite growth. Severe macrosegregation was observed in all cases studied and the degree of convection inferred by modeling the observed composition segregation using a stagnant film approach. Morphological stability was found to follow a constitutional supercooling-type law for both Bi and Mn rich compositions.

Pirich, R. G.↗
NASA NTRS1982

Finite element analysis of the effect of a non-planar solid-liquid interface on the lateral solute segregation during unidirectional solidification

The effect of solid-liquid interface shape on lateral solute segregation during steady-state unidirectional solidification of a binary mixture is calculated under the assumption of no convection in the liquid. A finite element technique is employed to compute the concentration field in the liquid and the lateral segregation in the solid with a curved boundary between the liquid and solid phases. The computational model is constructed assuming knowledge of the solid-liquid interface shape; no attempt is made to relate this shape to the thermal field. The influence of interface curvature on the lateral compositional variation is investigated over a range of system parameters including diffusivity, growth speed, distribution coefficient, and geometric factors of the system. In the limiting case of a slightly nonplanar interface, numerical results from the finite element technique are in good agreement with the analytical solutions of Coriell and Sekerka obtained by using linear theory. For the general case of highly non-planar interface shapes, the linear theory fails and the concentration field in the liquid as well as the lateral solute segregation in the solid can be calculated by using the finite element method.

Carlson, F. M.↗
NASA NTRS1983

Characterization of the general purpose research furnace for low-G directional solidification experiments

Preliminary tests have shown that it is possible to control the temperature settings in NASA's General Purpose Research Furnace in such a manner as to obtain a constant rate of movement of a high temperature isotherm down the length of the furnace. These tests also showed that a temperature gradient on the order of 40 deg cm could be obtained in the furnace while moving the particular isotherm of interest, i.e., 900 C. This provides the possibility of performing directional solidification experiments in the furnace on a MEA flight in the low gravity environment provided by the Shuttle. A functional dependency of growth rate on perturbations during the the growth has been derived and shows the importance of avoiding non-steady growth rates and changing temperature gradients.

Crouch, R. K.↗
NASA NTRS1984

Advanced powder metallurgy aluminum alloys via rapid solidification technology

Aluminum alloys containing 10 to 11.5 wt. pct. of iron and 1.5 to 3 wt. pct. of chromium using the technique of rapid solidification powder metallurgy were studied. Alloys were prepared as thin ribbons (.002 inch thick) rapidly solidified at uniform rate of 10(6) C/second by the melt spinning process. The melt spun ribbons were pulverized into powders (-60 to 400 mesh) by a rotating hammer mill. The powders were consolidated by hot extrusion at a high reduction ratio of 50:1. The powder extrusion temperature was varied to determine the range of desirable processing conditions necessary to yield useful properties. Powders and consolidated alloys were characterized by SEM and optical metallography. The consolidated alloys were evaluated for (1) thermal stability, (2) tensile properties in the range, room temperature to 450 F, and (3) notch toughness in the range, room temperature to 450 F.

Ray, R.↗
NASA NTRS1984

Solidification structures grown under induced flow and continuous casting of steel

The use of induced flow as a means to control solidification structures in strand cast steel is investigated. The quality problems in strand cast steel stemming from columnar growth can be partially controlled, by Electro Magnetic Stirring (EMS). Induced flow changes the normal morphology of dendrites. Solids grown under intense stirring conditions show both negative and positive segregation which is considered unacceptable by some steel producers. The inclusion size and population is strongly affected by induced flow (EMS). Laboratory and industrial data show substantial reduction in inclusion size and content, but the overall effect of flow on inclusions is affected by the particular type of flow patterns utilized in each case. Productivity and quality are raised substantially in steel strand casting by utilizing EMS.

Tsavaras, A. A.↗