Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural characteristics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Structural considerations in design of lightweight glass-fiber composite pressure vessels

The design concepts used for metal-lined glass-fiber composite pressure vessels are described, comparing the structural characteristics of the composite designs with each other and with homogeneous metal pressure vessels. Specific design techniques and available design data are identified. The discussion centers around two distinctly different design concepts, which provide the basis for defining metal lined composite vessels as either (1) thin-metal lined, or (2) glass fiber reinforced (GFR). Both concepts are described and associated development problems are identified and discussed. Relevant fabrication and testing experience from a series of NASA-Lewis Research Center development efforts is presented.

Faddoul, J. R.↗
NASA NTRS1974

Infrared photometry of Titan

A set of observations of Titan at wavelengths from 1.6 through 34 microns shows that Titan has a remarkably low albedo near 1.6 micron. Thermal flux observations for 10 years at 10.6 microns and for 5 years at 21 microns suggest that the thermal properties of Titan remained constant over this period and are independent of phase. Narrowband photometry between 17 and 25 microns does not indicate the presence of a structure characteristic of a hydrogen-rich atmosphere. An atmospheric model consistent with the observations is proposed for Titan.-

Low, F. J.↗
NASA NTRS1974

Probe design

Outer planetary probe designs consider mission characteristics, structural configuration, delivery mode, scientific payload, environmental extremes, mass properties, and the launch vehicle and spacecraft interface.

Cowan, W.↗
NASA NTRS1977

Viking Mars hydrazine terminal descent engine thermal design considerations

A description is given of some of the more significant thermal design considerations employed in the development and qualification of the monopropellant hydrazine terminal descent engines on the Viking Mars lander spacecraft. The terminal descent engine operates in a blowdown and throttling mode, which results in an operating thrust range of 638 to 90 lbf. Martian entry thermal design boundary conditions are described, along with resulting radiative and conductive engine thermal isolation hardware. Test results are presented, showing engine thermal design performance as compared with specified requirements. General engine materials of construction are described, along with Hastelloy B shell structural characteristics, which were extended to 2000 F by test and are compared with limited existing MIL-HDBK-5 data. Subscale test results are presented, showing the maximum catalyst bed cylinder design temperature of 1970 F. Test results also are presented, showing local reactor internal convective heat-transfer coefficients. Such data are unique, since the engine employs a completely radial flow catalyst bed design. This design approach is the first of its kind in the monopropellant hydrazine gas generator field to be flight qualified.

Cunningham, C. R.↗
NASA NTRS1978

Preburner of Staged Combustion Rocket Engine

A regeneratively cooled LOX/hydrogen staged combustion assembly system with a 400:1 expansion area ratio nozzle utilizing an 89,000 Newton (20,000 pound) thrust regeneratively cooled thrust chamber and 175:1 tubular nozzle was analyzed, assembled, and tested. The components for this assembly include two spark/torch oxygen-hydrogen igniters, two servo-controlled LOX valves, a preburner injector, a preburner combustor, a main propellant injector, a regeneratively cooled combustion chamber, a regeneratively cooled tubular nozzle with an expansion area ratio of 175:1, an uncooled heavy-wall steel nozzle with an expansion area ratio of 400:1, and interconnecting ducting. The analytical effort was performed to optimize the thermal and structural characteristics of each of the new components and the ducting, and to reverify the capabilities of the previously fabricated components. The testing effort provided a demonstration of the preburner/combustor chamber operation, chamber combustion efficiency and stability, and chamber and nozzle heat transfer.

Yost, M. C.↗
NASA NTRS1978

Low energy ionizing collisions between N2 and CO beam molecules and CO, N2, NO, CH4, and CO2 target molecules

Absolute total negative charge production cross sections for N2 + CO, CO + N2, CO + CO, N2 + NO, N2 + CH4, and N2 + CO2 collisions are reported, and a simple model of collisions is discussed. The cross sections were measured to within about 1 eV of their thresholds. Specific reaction channels were investigated by referring to mass spectrometric identification of the product ions scattered in the forward direction, and these product ion identifications were used to explain characteristic structures in the total charge production cross sections in the near-threshold regions. The extent of the importance of dissociative ionization and 'simple' ionization in the studied collisions at low energy is considered, and charge transfer cross sections for (CO)+ + CO, CO(+) + CH4, and N2(+) + CH4 are presented.

Utterback, N. G.↗
NASA NTRS1979

Test and evaluation of Fern Engineering Company, Incorporated, solar heating and hot water system

Tests, test results, examination and evaluation by Underwriters Laboratory, Inc., of a single family solar heating and hot water system consisting of collector, storage, control, transport, and data acquisition are presented. The structural characteristics of the solar flat plate collectors were evaluated according to snow and wind loads indicated in various building codes to determine their suitability for use both Michigan and Pennsylvania where prototype systems were installed. The flame spread classification of the thermal insulation is discussed and the fire tests conducted on components are described. The operation and dielectrics withstand tests of the energy transport module indicate the module is capable of rated air delivery. Tests of the control panel indicate the relay coil temperatures exceed the temperature limits allowed for the insulating materials involved.

Source record↗
NASA NTRS1979

Modeling of polymer networks for application to solid propellant formulating

Methods for predicting the network structural characteristics formed by the curing of pourable elastomers were presented; as well as the logic which was applied in the development of mathematical models. A universal approach for modeling was developed and verified by comparison with other methods in application to a complex system. Several applications of network models to practical problems are described.

Marsh, H. E.↗
NASA NTRS1980

Structural tests on a tile/strain isolation pad thermal protection system

The aluminum skin of the space shuttle is covered by a thermal protection system (TPS) consisting of a low density ceramic tile bonded to a matted-felt material called strain insulation pad (SIP). The structural characteristics of the TPS were studied experimentally under selected extreme load conditions. Three basic types of loads were imposed: tension, eccentrically applied tension, and combined in-plane force and transverse pressure. For some tests, transverse pressure was applied rapidly to simulate a transient shock wave passing over the tile. The failure mode for all specimens involved separation of the tile from the SIP at the silicone rubber bond interface. An eccentrically applied tension load caused the tile to separate from the SIP at loads lower than experienced at failure for pure tension loading. Moderate in-plane as well as shock loading did not cause a measurable reduction in the TPS ultimate failure strength. A strong coupling, however, was exhibited between in-plane and transverse loads and displacements.

Williams, J. G.↗
NASA NTRS1979

On the approach to forecasting polar ionospheric conditions

The major properties of polar ionospheric main anomalous events are summarized. The monitoring of large scale features of the ionization distribution that are the projections of large scale structural characteristics of magnetospheric plasma on the upper ionosphere is suggested as a basic principle of polar ionospheric condition forecasting. It is concluded that the processes of the magnetosphere/ionosphere interaction appear to play a predominant role in the creation of the polar ionosphere.

Besprozvannaya, A. S.↗
NASA NTRS1980

The High Visible Resolution (HVR) instrument of the spot ground observation satellite

Two identical high resolution cameras, capable of attaining a track width of 116 km in an almost vertical line of sight from the two 60 km images of each instrument, will be carried on the initial mission of the space observation of Earth satellite (SPOT). Specifications for the instrument, including the telescope and CCD devices are summarized. The present status of development is described including the optical characteristics, structure and thermal control, detector assembly, electronic equipment, and calibration. SPOT mission objectives include the developments relating to soil use, the exploration of EART Earth resources, the discrimination of plant species, and cartography.

Otrio, G.↗
NASA NTRS1980

Prediction of the interior noise levels of high-speed propeller-driven aircraft

The theoretical basis for an analytical model developed to predict the interior noise levels of high-speed propeller-driven airplanes is presented. Particular emphasis is given to modeling the transmission of discrete tones through a fuselage element into a cavity, estimates for the mean and standard deviation of the acoustic power flow, the coupling between a non-homogeneous excitation and the fuselage vibration response, and the prediction of maximum interior noise levels. The model allows for convenient examination of the various roles of the excitation and fuselage structural characteristics on the fuselage vibration response and the interior noise levels, as is required for the design of model or prototype noise control validation tests.

Rennison, D. C.↗
NASA NTRS1981

The Space Shuttle

The development of the Space Shuttle is traced. Aerodynamic loads and dynamic characteristics, structural design, ascent and entry heating profiles, and propulsion systems are discussed. Problems in the area of systems management and flight control during entry and in the design of an effective thermal control system are discussed in detail.

Faget, M. A.↗
NASA NTRS1982

Galileo probe forebody flowfield predictions during Jupiter entry

This paper presents forebody flowfield solutions for Jupiter entry conditions where the ablation injection rate is coupled with the surface heating rate. The calculations are made with a time-dependent viscous-shock-layer analysis where the flow is assumed to be in chemical equilibrium. The results obtained demonstrate how variations in various properties influence the calculations and how recent modifications in probe forebody heatshield design influence the heating and mass-loss conditions for Jupiter entry. The heatshield mass-loss rates are shown to decrease when the new radiative and thermodynamic property values are used as well as when the nose bluntness is reduced. Also, the inclusion of a finite surface reflectivity reduces the mass loss whereas spallation increases the mass loss by about 6 percent. Finally, the heating, mass-loss, and flowfield structure characteristics are described for a 335-kg probe as it enters the atmosphere of Jupiter.

Moss, J. N.↗
NASA NTRS1981

Observations of dynamical phenomena in sunspots

A preliminary report of the results of one observing run based on data from one spectral line, the photospheric magnetic line Fe 6303, is presented as part of a series of observations of dynamical phenomena in sunspots using photographic spectra with the SPO vacuum tower telescope and echelle spectrograph. The ejection of a magnetic feature from the outer edge of the penumbra was observed. The initial total field strength of the feature was about 1000 gauss, which appeared to decrease as the feature moved away from the sunspot. The proper motion was about 2 km/s, and the velocity field measured in the V profile showed a downflow of 400 m/s on the spotward side of the moving magnetic feature. Umbral oscillations at the photospheric level with a herringbone structure characteristic of horizontally propagating waves, suggesting some overtone mode of membrane oscillation in the umbra, were seen. The peak amplitude of the oscillation was about 200 m/s, and the mean power spectrum had several clear peaks.

Nye, A. H.↗
NASA NTRS1983

Parametrization of Fresnel returns

It appears appropriate to use the intensity correlation function to investigate variations of a reflected signal component, and a scattered signal component, because it is determined by the relative motions, i.e., fluctuations of structual changes. An example of a correlation function is shown which can be separated into three parts: (1) a very fast drop between zero and the neighboring lag which is due to uncorrelated noise; (2) a smooth decrease at small large up to a few seconds which is due to scattering (this decrease can be approximated by a parabola); (3) a rather slow fadeout which is due to Frensel reflection and very gradually approaches zero correlation for longer lags. The noise contribution (part 1) must be eliminated by normalizing the correlation function by means of the zero-lag value which follows from a parabolic approximation. As signal intensity variations are directly connected to turbulent variations in a scattering medium or the changes of a reflecting discontinuity, parts (2) and (3) of the normalized correlation functions in terms of characteristic structure parameters, are evaluated.

Rottger, J.↗
NASA NTRS1984

Solidification study of some Ni- and Co-base alloys

An ongoing research program aims to characterize the solidification of several Ni- and Co-based commercial wrought type alloys. The techniques used and the data items sought are: (1) thermal analysis, liquidus, nonequilibrium solidus as a function of cooling rate, secondary reactions temperatures, incipient melting, progress of solidification as a function of temperature; (2) optical metallography, characteristic structures and secondary dendrite arm spacing as a function of cooling rate; (3) X-ray diffraction, identification of precipitates; and (4) SEM/EDAX, measure of microsegregation.

Jeanfils, C. L.↗