Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural variation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Variation of char structure during anthracite pyrolysis catalyzed by Fe{sub 2}O{sub 3} and its influence on char combustion reactivity

Effects of Fe{sub 2}O{sub 3} on the pyrolysis reactivity of demineralized anthracite were investigated by a thermo-gravimetric analyzer, indicating that pyrolysis reactivity of Fe{sub 2}O{sub 3}-loaded demineralized anthracite was higher than that of raw demineralized anthracite when temperature is over 500{sup o}C. Chars were prepared from the two coal samples in muffle with heating progress, and their structures were analyzed using SEM, FTIR, XRD, and Raman. FTIR results showed that absorption peaks of functional groups on the surface of char from catalytic pyrolysis at 700{sup o}C were more than that of char from noncatalytic pyrolysis. Raman results demonstrated values of (I{sub D3} + I{sub D4})/IG of chars from catalytic pyrolysis and noncatalytic pyrolysis were 4.76 and 3.86, respectively, indicating that ordering of the char was decreased by Fe{sub 2}O{sub 3}. XRD analysis revealed that diffraction angle of the 002 peak did not shift; however, L{sub a} and L{sub c} decreased, indicating degree of graphitization for microcrystalline structure of char from catalytic pyrolysis was decreased. The results of FTIR, XRD, and Raman of the char showed that catalytic pyrolysis improved the formation of free radicals, while hindered polymerization and forming of basic structure units. Finally, combustion reactivity of the three chars, including char of raw demineralized anthracite (char-A), char of Fe{sub 2}O{sub 3}-loaded demineralized anthracite (char-B), and char of Fe{sub 2}O{sub 3}-loaded demineralized anthracite washed by HCl (char-C), was investigated using TG and indicated that their active order was char-B > char-C > char-A. The results corroborated that Fe{sub 2}O{sub 3} changed structure of anthracite char and improved combustion reactivity.

01 COAL, LIGNITE, AND PEAT↗

Electricity consumption variation versus economic structure during COVID-19 on metropolitan statistical areas in the US

The outbreak of novel coronavirus disease (COVID-19) has resulted in changes in productivity and daily life patterns, and as a result electricity consumption (EC) has also shifted. In this paper, we construct estimates of EC changes at the metropolitan level across the continental U.S., including total EC and residential EC during the initial two months of the pandemic. The total and residential data on the state level were broken down into the county level, and then metropolitan level EC estimates were aggregated from the counties included in each metropolitan statistical area (MSA). This work shows that the reduction in total EC is related to the shares of certain industries in an MSA, whereas regardless of the incidence level or economic structure, the residential sector shows a trend of increasing EC across the continental U.S. Since the MSAs account for 86% of the total population and 87% of the total EC of the continental U.S., the analytical result in this paper can provide important guidelines for future social-economic crises.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Variation in the structure of a time-dependent SRS spectrum in microfiltered water

The time-dependent stimulated Raman scattering of light in water subjected to structural transformation by track membrane microfiltration is investigated. It is shown that the probability of SRS at the frequency of the ice spectral component in the band of stretching OH vibrations of water molecules decreases as a result of water filtration. (nonlinear optical phenomena)

74 ATOMIC AND MOLECULAR PHYSICS↗

Oxyanion Induced Variations in Domain Structure for Amorphous Cobalt Oxide Oxygen Evolving Catalysts, Resolved by X-ray Pair Distribution Function Analysis

Amorphous thin film oxygen evolving catalysts, OECs, of first-row transition metals show promise to serve as self-assembling photoanode materials in solar-driven, photoelectrochemical `artificial leaf' devices. This report demonstrates the ability to use high-energy X-ray scattering and atomic pair distribution function analysis, PDF, to resolve structure in amorphous metal oxide catalyst films. The analysis is applied here to resolve domain structure differences induced by oxyanion substitution during the electrochemical assembly of amorphous cobalt oxide catalyst films, Co-OEC. PDF patterns for Co-OEC films formed using phosphate, Pi, methylphosphate, MPi, and borate, Bi, electrolyte buffers show that the resulting domains vary in size following the sequence Pi < MPi < Bi. The increases in domain size for CoMPi and CoBi were found to be correlated with increases in the contributions from bilayer and trilayer stacked domains having structures intermediate between those of the LiCoOO and CoO(OH) mineral forms. The lattice structures and offset stacking of adjacent layers in the partially stacked CoMPi and CoBi domains were best matched to those in the LiCoOO layered structure. The results demonstrate the ability of PDF analysis to elucidate features of domain size, structure, defect content and mesoscale organization for amorphous metal oxide catalysts that are not readily accessed by other X-ray techniques. Finally, PDF structure analysis is shown to provide a way to characterize domain structures in different forms of amorphous oxide catalysts, and hence provide an opportunity to investigate correlations between domain structure and catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding Processes Controlling the Temporal and Spatial Variations of PBL Structures Over the ARM SGP Site

The surface heat, moisture, and momentum fluxes are transferred to the atmosphere above through the planetary boundary layer (PBL), where vertical mixing due to turbulent eddies of different sizes plays critical roles. Therefore, reliably representing PBL processes in numerical models is critical for weather, climate, and air quality prediction. Currently, there are over ten PBL schemes that are selectable within the advanced research version of the Weather Research and Forecasting (WRF) model, indicative of the challenges in capturing the impacts of turbulence within the PBL in models. Further improvements in PBL parameterizations are needed for both weather and climate models, as emphasized in many recent national reports, but require an advanced understanding of the underlying boundary layer processes from observations. This project takes advantage of Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) investments in the atmospheric boundary layer observations and Large-Eddy Simulation (LES) ARM Symbiotic Simulation and Observation (LASSO) simulations to characterize PBL structures, understand key physical processes controlling the mixed layer development, and to evaluate PBL parameterization.

54 ENVIRONMENTAL SCIENCES↗

EXAFS investigations of temperature-dependent structure in cobalt-59 molecular NMR thermometers

Cobalt-59 nuclei are known for extremely thermally sensitive chemical shifts (δ), which in the long term could yield novel magnetic resonance thermometers for bioimaging applications. In this manuscript, we apply extended X-ray absorption fine structure (EXAFS) spectroscopy for the first time to probe the exact variations in physical structure that produce the exceptional thermal sensitivity of the 59 Co NMR chemical shift. We apply this spectroscopic technique to five Co(III) complexes: [Co(NH3)6]Cl3 (1), [Co(en) 3 ]Cl 3 (2) (en = ethylenediamine), [Co(tn) 3 ]Cl 3 (3) (tn = trimethylenediamine), [Co(tame) 2 ]Cl 3 (4) (tame = 1,1,1-tris(aminomethyl)ethane), and [Co(diNOsar)]Cl 3 (5) (diNOsar = dinitrosarcophagine). The solution-phase EXAFS data reveal increasing Co–N bond distances for these aqueous complexes over a ~50 °C temperature window, expanding by Δr (Co–N) = 0.0256(6) Å, 0.0020(5) Å, 0.0084(5) Å, 0.0006(5) Å, and 0.0075(6) Å for 1–5, respectively. Computational analyses of the structural changes reveal that increased connectivity between the donor atoms encourages complex structural variations. Finally, these results imply that rich temperature-dependent structural variations define 59 Co NMR thermometry in macrocyclic complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cyclic CO{sub 2} chemisorption–desorption behavior of Na{sub 2}ZrO{sub 3}: Structural, microstructural and kinetic variations produced as a function of temperature

A structural, microstructural and kinetic analysis of the Na{sub 2}ZrO{sub 3}–CO{sub 2} system was performed over 20 chemisorption–desorption cycles. Different cyclic experiments were performed between 500 and 800 °C. Although the best results were obtained in Na{sub 2}ZrO{sub 3} sample treated at 550 °C, all the samples treated between 500 and 700 °C presented good CO{sub 2} chemisorption efficiencies and stabilities. On the contrary, Na{sub 2}ZrO{sub 3} sample treated at 800 °C presented a continuous decrement of the CO{sub 2} chemisorption. After 20 cycles all the samples presented a partial Na{sub 2}ZrO{sub 3} decomposition, determined by the ZrO{sub 2} formation, which was associated to sodium sublimation. Additionally, the Na{sub 2}ZrO{sub 3} microstructural analysis showed a systematic morphological evolution. It was microscopically observed that Na{sub 2}ZrO{sub 3} particles tend to fracture due to the Na{sub 2}CO{sub 3} formation. Later, after several cycles these tiny fractured particles sinter producing new polyhedral and dense Na{sub 2}ZrO{sub 3}–ZrO{sub 2} particles. Finally, an exhaustive kinetic analysis showed a high CO{sub 2} chemisorption–desorption stability at different temperatures. - Graphical abstract: A CO{sub 2} chemisorption–desorption analysis was performed in the Na{sub 2}ZrO{sub 3}–CO{sub 2} system. Different cyclic experiments were performed between 500 and 800 °C and the results showed high CO{sub 2} chemisorption efficiencies. Nevertheless the Na{sub 2}ZrO{sub 3} composition and microstructure evolved during the cycles. Highlights: • Different CO{sub 2} chemisorption–desorption cycles were performed in the Na{sub 2}ZrO{sub 3} phase. • Na{sub 2}ZrO{sub 3} presents interesting microstructural changes depending on temperature. • At T≤550 °C, Na{sub 2}ZrO{sub 3} presents the best cyclability due to microstructural factors. • At T≥600 °C, Na{sub 2}ZrO{sub 3} presents a partial decomposition after 20 cycles. • Na{sub 2}ZrO{sub 3} presents excellent CO{sub 2} cyclability properties.

36 MATERIALS SCIENCE↗

Variation of a Defect Structure of Lithium Tetraborate (Li{sub 2}B{sub 4}O{sub 7}) in an External Electric Field

The variation of a defect structure of a lithium tetraborate single crystal under the influence of a high-strength external electric field applied along polar direction [001] has been studied by the X-ray diffraction (XDR) method. The conductivity kinetics has been measured; it is found to agree with changes in the diffraction peak parameters. Application of the electric field with the strength of 300–500 V/mm leads to a sharp broadening of the rocking curve and the increase in the integral intensity by several times, but the curve position and shape are only slightly changed. At higher electric fields from 500 to 1500 V/mm, the process of broadening the curve slows down; however, the shape asymmetry appears and the peak shifts to smaller angles, which is due to an increase in the lattice parameter along axis c. In this case, the changes become irreversible, since the distorted structure is partially recovered with a very low rate (for several months). Two types of the dependences of the rocking curves parameters variation under an external field are interpreted as the manifestation of two mechanisms of the ionic conduction due to mobile lithium (Li{sup +}) ions at low fields and oxygen vacancies (V{sub O}{sup 2+}) at higher fields. The charge carrier migration leads to an increase in the defect concentration and structural changes in a near-surface crystal region. The obtained results have practical importance from the point of view of the controlled change in the defect structure in the crystals with ionic conductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Protein–Mineral Interactions: Molecular Dynamics Simulations Capture Importance of Variations in Mineral Surface Composition and Structure

Molecular dynamics simulations, conventional and metadynamics, were performed to determine the interaction of model protein Gb1 over kaolinite (001), Na+-montmorillonite (001), Ca2+-montmorillonite (001), goethite (100), and Na+-birnessite (001) mineral surfaces. Gb1, a small (56 residue) protein with a well-characterized solution-state nuclear magnetic resonance (NMR) structure and having α-helix, four-fold β-sheet, and hydrophobic core features, is used as a model protein to study protein soil mineral interactions and gain insights on structural changes and potential degradation of protein. From our simulations, we observe little change to the hydrated Gb1 structure over the kaolinite, montmorillonite, and goethite surfaces relative to its solvated structure without these mineral surfaces present. Over the Na+-birnessite basal surface, however, the Gb1 structure is highly disturbed as a result of interaction with this birnessite surface. Unraveling of the Gb1 β-sheet at specific turns and a partial unraveling of the α-helix is observed over birnessite, which suggests specific vulnerable residue sites for oxidation or hydrolysis possibly leading to fragmentation.

Environmental Molecular Sciences Laboratory↗

Temperature-dependent excitonic absorption in long-period multiple In{sub x}Ga{sub 1-x}As/GaAs quantum well structures

Temperature variations in the fundamental absorption edge of long-period In{sub x}Ga{sub 1-x}As/GaAs structures are studied for samples with different numbers of quantum wells and similar periods. The quantum wells were close in composition and width. Experimental data are interpreted in the model of exciton-polariton light transfer involving localized excitons in confined structures with a finite number of quantum wells. The experimentally observed low-temperature anomaly of the integrated absorption coefficient is attributed to reemission of resonance localized excitons along a finite chain of quantum wells, with no excitonic transfer. The radiative decay time of an exciton in a single quantum well is estimated from the experimental data. It is demonstrated that, at low temperatures, the major contribution to the width of the experimentally observed absorption line corresponding to the ground heavy-hole exciton state is made by inhomogeneous broadening of the line by the field of potential fluctuations associated with the compositional disorder of the alloy. At low temperatures, the inhomogeneous broadening is much more pronounced than the broadening governed by the true radiative and nonradiative dissipative decay.

36 MATERIALS SCIENCE↗

Systematic evaluation of structure–property relationships in heteroacene – diketopyrrolopyrrole molecular donors for organic solar cells

Improved understanding of fundamental structure–property relationships, particularly the effects of molecular shape and intermolecular packing on film morphology and active layer charge transport characteristics, enables more rational synthesis of new p-type small molecules. Here we investigate a series of small molecules consisting of an acene-based electron-rich core flanked by one or two electron-deficient diketopyrrolopyrrole (DPP) moieties. Through minor changes in the molecule structures, measurable variations in the crystal structure and sizable differences in macroscopic properties are achieved. The molecular symmetry as well as the conformation of the side chains affects the unit cell packing density and strength of the intermolecular electronic coupling in single crystals of all molecules in this series. Here, the addition of a second DPP unit to the benzodithiophene (BDT) core increases molecular planarity leading to decreased reorganization energy, strong cofacial coupling, and moderate hole mobility (2.7 × 10 –4 cm 2 V –1 s –1 ). Increasing the length of the acene core from benzodithiophene to naphthodithiophene (NDT) results in a further reduction in reorganization energy and formation of smaller crystalline domains (~11 nm) when mixed with PCBM. Decreasing the aspect ratio of the core using a “zig-zag” naphthodithiophene (zNDT) isomer results in the highest hole mobility of 1.3 × 10 –3 cm 2 V –1 s –1 due in part to tight lamellar (d = 13.5 Å) and π–π stacking (d = 3.9 Å). The hole mobility is directly correlated with the short-circuit current (11.7 mA cm –2 ) and solar cell efficiency (4.4%) of the highest performing zNDT:PCBM device. For each of these small molecules the calculated π-coupling constant is correlated with the hole mobility as a function of crystal structure and orientation indicating the importance of designing molecules that create extended crystalline networks with maximal π-orbital overlap.

36 MATERIALS SCIENCE↗

New constraints on variations of the fine structure constant from CMB anisotropies

We demonstrate that recent measurements of cosmic microwave background temperature and polarization anisotropy made by the ACBAR, QUAD, and BICEP experiments substantially improve the cosmological constraints on possible variations of the fine structure constant in the early universe. This data, combined with the five year observations from the WMAP mission, yield the constraint {alpha}/{alpha}{sub 0}=0.987{+-}0.012 at 68% C.L. The inclusion of the new Hubble Space Telescope constraints on the Hubble constant further increases the accuracy to {alpha}/{alpha}{sub 0}=1.001{+-}0.007 at 68% C.L., bringing possible deviations from the current value below the 1% level and improving previous constraints by a factor of {approx}3.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Varying alpha and cosmic acceleration in Brans-Dicke-BSBM theory: stability analysis and observational tests

By integration of generalized BSBM and Brans-Dicke cosmological models, in this article, we investigate the theoretical framework of fine structure constant variation and current cosmic acceleration. We first develop a mathematical formalism to analyse the stability of the model. By employing observational data to constrain the model parameters, phase space is performed and the attractor solutions of the model are detected. We then examine the model against observational data such as observational Hubble parameter dataset and quasar absorption spectra. The results confirm current universe acceleration and also predicts fine structure constant variation. Furthermore, extrapolation of the best fitted model in high redshift (z > 15) illustrates a significantly larger variation of fine structure constant in earlier epoch of the universe.

79 ASTRONOMY AND ASTROPHYSICS↗

Structural variant analysis of a cancer reference cell line sample using multiple sequencing technologies

The cancer genome is commonly altered with thousands of structural rearrangements including insertions, deletions, translocation, inversions, duplications, and copy number variations. Thus, structural variant (SV) characterization plays a paramount role in cancer target identification, oncology diagnostics, and personalized medicine. As part of the SEQC2 Consortium effort, the present study established and evaluated a consensus SV call set using a breast cancer reference cell line and matched normal control derived from the same donor, which were used in our companion benchmarking studies as reference samples. We systematically investigated somatic SVs in the reference cancer cell line by comparing to a matched normal cell line using multiple NGS platforms including Illumina short-read, 10X Genomics linked reads, PacBio long reads, Oxford Nanopore long reads, and high-throughput chromosome conformation capture (Hi-C). We established a consensus SV call set of a total of 1788 SVs including 717 deletions, 230 duplications, 551 insertions, 133 inversions, 146 translocations, and 11 breakends for the reference cancer cell line. To independently evaluate and cross-validate the accuracy of our consensus SV call set, we used orthogonal methods including PCR-based validation, Affymetrix arrays, Bionano optical mapping, and identification of fusion genes detected from RNA-seq. We evaluated the strengths and weaknesses of each NGS technology for SV determination, and our findings provide an actionable guide to improve cancer genome SV detection sensitivity and accuracy. A high-confidence consensus SV call set was established for the reference cancer cell line. A large subset of the variants identified was validated by multiple orthogonal methods.

59 BASIC BIOLOGICAL SCIENCES↗

Microstructure and properties of additively manufactured Al–Ce–Mg alloys

Additive manufacturing of aluminum alloys is largely dominated by a near-eutectic Al-Si compositions, which are highly weldable, but have mechanical properties that are not competitive with conventional wrought Al alloys. In addition, there is a need for new Al alloys with improved high temperature properties and thermal stability for applications in the automotive and aerospace fields. In this work, we considered laser powder bed fusion additive manufacturing of two alloys in the Al–Ce–Mg system, designed as near-eutectic (Al–11Ce–7Mg) and hyper-eutectic (Al–15Ce–9Mg) compositions with respect to the binary L → Al + Al 11 Ce eutectic reaction. The addition of magnesium is used to promote solid solution strengthening. A custom laser scan pattern was used to reduce the formation of keyhole porosity, which was caused by excessive vaporization due to the high vapor pressure of magnesium. The microstructure and tensile mechanical properties of the alloys were characterized in the as-fabricated condition and following hot isostatic pressing. The two alloys exhibit significant variations in solidification structure morphology. These variations in non-equilibrium solidification structure were rationalized using a combination of thermodynamic and thermal modeling. Both alloys showed higher yield strength than AM Al-10Si-Mg for temperatures up to 350 °C and better strength retention at elevated temperatures than additively manufactured Scalmaloy.

36 MATERIALS SCIENCE↗