Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sun-synchronous”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

341 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

ACS3 - Flight Dynamics for A Solar Sail Technology Demonstration Mission

The NASA's Advanced Composite Solar Sail System (ACS3) mission consist of a spacecraft that will deploy an 80 m 2 solar sail in a 1000 km sun-synchronous orbit. The main objective of the mission is to demonstrate that the solar wind can impulse the spacecraft to change the semimajor-axis and obtain a different orbit altitude. The sail will be composed of a combination of composite materials with distinct properties, and it will be deployed with lightweight booms from a 12U CubeSat bus, developed by Nanoavionics. The spacecraft will be launched aboard an Electron launch vehicle from Rocket LAB Launch Complex in New Zealand no earlier than July 2023. This paper covers the orbital mechanics and navigation developments to support the mission, from the solar sail trajectory model to the actual flight dynamics system to provide the orbit determination analysis prior to flight. First, we introduce a description of our high-fidelity propagation that accounts for the solar radiation pressure to produce predictive ephemeris of the solar sail performance with several spacecraft attitude modes. As part of our results, we present plots of the expected altitudes achieved by the spacecraft once the solar sail is deployed under various assumptions of the solar weather. In addition to that, we present a full description of our orbit determination process which relies in GPS state vectors to accurately estimate the position and velocity uncertainties at a frequent cadence during the mission. The outcome of this process will be critical to achieving the objective of determining effective altitude change produced by the solar sail.

Solar Sail↗
NASA NTRSDate not supplied

Open Source Application of Fusing Aerosol Products from GEO and LEO Satellites

Retrieving aerosol optical depths (AODs) from sun-synchronous polar orbiting (aka low earth orbit, LEO) satellites, such as MODISs, and VIIRSs, OMI, TROPOMI, etc, has become well-established as a tool for extracting information on particulate matter (PM) and related processes in the atmosphere. However, with recently launched geostationary satellites (GEO), such as GOES-16/17/18, and Himawari-8/9, and Meteosat Third Generation (MTG) they provide a much higher temporal resolution (order of 10 minutes), typically an image once or more per hour during daylight compared to LEO once per day. By combining these observations, we may be able to characterize the diurnal cycle of global AOD at the local, regional and global scale. While the science community is still exploring the new data from GEO observations, we have been thinking about how to properly combine/merge/fuse those data considering differences in their spatial and temporal resolutions. However, this poses a “Big Data” challenge. The big data challenge is not just about data storage, but also about data discoverability, and accessibility, and even more, about data migration/mirroring in the cloud-computing environment. This paper is merely showing some of the efforts and approaches we have attempted in fusing six satellites’ Level 2 aerosol data (three are from GEO (GOES-16/17 and Himawari-8), and the other three are from LEO (TERRA/MODIS, AQUA/MODIS, SNPP-VIIRS) from Dark Target (DT) aerosol retrieval algorithm. Having the on-demand capability of fusing remote sensing products onto the desired temporal and spatial domain enables researchers and application practitioners to better manipulate and work with satellite and sensor data. It is our hopeWe hope that by making such an open-source package, and the accompanying functionality, the scientific community will be granted easier access to aerosol data processing resources. The MEaSUREs Program (Making Earth System Data Records for Use in Research Environments) expands our understanding of the Earth's current system through atmospheric and surface measurements. In an effort to aid the scientific research component and improve open source methods, this project developed Python code for fusing six satellite Level 2 aerosol data (three are from geostationary satellites (GEO), and the other three are from low earth orbital satellites (LEO)) from Dark Target Aerosol Retrieval Algorithm.

Jennifer Wei↗
NASA NTRS2023

NASA’s Atmosphere Observing System (AOS), From A Precipitation Perspective

NASA is developing the Atmosphere Observing System (AOS) mission as part of its Earth System Observatory (ESO) in response to priorities identified in the 2017 Earth Science Decadal Survey. AOS addresses the Decadal Survey’s call for missions measuring the targeted observables “clouds, convection, and precipitation”; “aerosol and cloud radiative properties”, and “aerosol vertical profiles”. AOS is currently in Phase A, the concept and technology development phase, with plans for satellite launches in the late 2020’s and early 2030’s, and suborbital measurements to include field campaigns after those satellite launches. Key precipitation-related instrumentation includes Doppler radars capable of measuring clouds and precipitation, and passive microwave radiometers with channels between 89-700 GHz. Other instrumentation includes dual-wavelength backscatter lidars, a multi-wavelength and multi-angle polarimeter, a far infrared imaging radiometer, and aerosol and moisture limb sounders that will contribute to studies of coupled aerosol-cloud-precipitation processes. From the perspective of precipitation science, a Ku-band Doppler radar in a 55° inclined orbit provided by JAXA will continue the heritage of precipitation radar measurements made by the Tropical Rainfall Measuring Mission (TRMM) and Global Precipitation Mission (GPM), while adding information about Doppler-derived particle vertical motions. With assumptions about particle terminal velocities, the Doppler measurements will enable estimates of the vertical air motion in storms. A higher frequency (W and/or Ka band) radar on a satellite in a polar sun-synchronous orbit will add similar information with greater sensitivity to clouds and to light precipitation. Passive microwave radiometers for AOS will be less capable than those from TRMM and GPM from a precipitation-measurement perspective, but more capable of adding information about cloud processes. Synergies among these and other instruments are expected to advance process-level understanding of aerosols, clouds, and precipitation.

Daniel J Cecil↗
NASA NTRS2023

A SmallSat Concept to Resolve Diurnal and Vertical Variations of Aerosols, Clouds, and Boundary Layer Height

A SmallSat mission concept is formulated here to carry out Time-varying Optical Measurements of Clouds and Aerosol Transport (TOMCAT) from space while embracing low-cost opportunities enabled by the revolution in Earth science observation technologies. TOMCAT’s “around-the-clock” measurements will provide needed insights and strong synergy with existing Earth observation satellites to 1) statistically resolve diurnal and vertical variation of cirrus cloud properties (key to Earth’s radiation budget), 2) determine the impacts of regional and seasonal planetary boundary layer (PBL) diurnal variation on surface air quality and low-level cloud distributions, and 3) characterize smoke and dust emission processes impacting their long-range transport on the subseasonal to seasonal time scales. Clouds, aerosol particles, and the PBL play critical roles in Earth’s climate system at multiple spatiotemporal scales. Yet their vertical variations as a function of local time are poorly measured from space. Active sensors for profiling the atmosphere typically utilize sun-synchronous low-Earth orbits (LEO) with rather limited temporal and spatial coverage, inhibiting the characterization of spatiotemporal variability. Pairing compact active lidar and passive multiangle remote sensing technologies from an inclined LEO platform enables measurements of the diurnal and vertical variability of aerosols, clouds, and aerosol-mixing-layer (or PBL) height in tropical-to-midlatitude regions where most of the world’s population resides. TOMCAT is conceived to bring potential societal benefits by delivering its data products in near–real time and offering on-demand hazard-monitoring capabilities to profile fire injection of smoke particles, the frontal lofting of dust particles, and the eruptive rise of volcanic plumes.

John E. Yorks↗
NASA NTRSDate not supplied

Advanced Composite Solar Sail System (ACS3) Mission Update

The Advanced Composite Solar Sail System (ACS3) will be the first practical solar sail for the National Aeronautics and Space Administration. [1] ACS3 will also be the first spaceflight demonstration of NASA compact deployable composite boom technology.[2] The primary mission objective of ACS3 will be to deploy and characterize an 80-m2 composite boom structure solar sail technology in low Earth orbit. Extended mission goals will be to demonstrate controlled solar sailing flight via a series of orbit raising and lowering maneuvers. Target mission orbit is a 1000 km x 1000 km midnight-noon sun-synchronous orbit. Launch of ACS3 is scheduled for July 2023 with sail deployment in September 2023. Mission duration is expected to be six to nine months. The ACS3 solar sail vehicle is a 12U Cubesat consisting of a bus module, containing flight and solar sail control avionics, and a solar sail module, containing the composite booms and metallized polymer solar sail membranes of the solar sail structure stowed within a boom deployer mechanism. A four-camera instrument suite for 360-degree imaging of the ACS3 solar sail during and after deployment is also housed within the bus module. The ACS3 80-m2 solar sail design is a sub-scale version of an intermediate-size 500-m2 solar sail using NASA deployable composite boom technology. The sail consists of four metallized 2-m thick polyethylene naphthalate (PEN) 20-m2 triangular quadrants supported by four 7-m long lenticular cross-section composite booms. Booms are flattened and co-coiled for stowage within a tape-spool driven deployer mechanism. Total mass of the ACS3 space vehicle including solar sail is 16 kg. An overview of the ACS3 mission and mission systems will be provided in this presentation. This overview will include descriptions of the solar sail structures and materials technology used with ACS3, and discussion of the scalability and extensibility of the ACS3 solar sail to future larger-scale solar sailing mission requirements. An update on progress towards the launch of ACS3 in July 2023 will also be provided. References [1] https://www.nasa.gov/directorates/spacetech/small_spacecraft/ACS3 [2] https://www.nasa.gov/directorates/spacetech/game_changing_development/projects/dcb

Solar sail↗
NASA NTRSDate not supplied

The Orbital Drift Impact on the Monthly Regional TOA Flux Assuming Constant Meteorology

The NASA Clouds and the Earth's Radiant Energy System (CERES) gridded Single Scanner Footprint (SSF1deg) product provides TOA SW and LW monthly 1° regional all-sky fluxes, which are used to monitor the Earth’s energy balance. The CERES long-term climate data record relies on Terra and Aqua satellite sun-synchronous orbits that are maintained at 10:30 and 1:30 local equator crossing times (LECT), respectively. The Terra and Aqua satellites are expected to drift outside of their respective LECT during mid 2022. Both Terra and Aqua will drift over several years towards sunrise and sunset, respectively, and eventually will be deorbited. The CERES SSF1deg product monthly regional fluxes are based on the well calibrated and stable CERES observed fluxes and are temporally interpolated assuming constant meteorology between measurements to resolve the regional diurnal flux cycle to obtain a daily averaged flux. The drifting orbits may impact the monthly regional TOA flux over regions with systematic diurnal cycles, because the observations will shift in local time. The CERES project would like to determine the maximum Terra and Aqua LECT time shift before the monthly regional fluxes are diurnally impacted and become unreliable for long-term climate monitoring. To determine the impact of the drifting orbits on the SSF1deg monthly regional fluxes,15-minute Geostationary Earth Radiation Budget (GERB) broadband observed fluxes over the Meteosat geostationary satellite domain (±60° in longitude and latitude) are used as proxy CERES observations. The drifting orbit sampling pattern is achieved by simply incrementing the observation time by steps of 15 minutes from the CERES footprint time. For each 15-minute time interval, the CERES observed fluxes are replaced by the GERB observed fluxes. The-15 minute incremented monthly regional fluxes based on constant meteorology are compared to the reference 10:30 and 1:30 LECT fluxes. Regions with systematic diurnal cycles, include morning maritime stratus, where the clouds dissipate during the morning, and land afternoon convection, where clouds increase in the afternoon will impact the regional flux differences. Based on January and July 2010 GERB data, even a 15-minute LECT change caused regional monthly flux differences that would impact long term regional trend analysis. Results will be shown at the conference.

D R Doelling↗
NASA NTRSDate not supplied

Pyroscopegridding: Geo-Leo Aerosol Data Fusion (an Open-Source Package)

The retrieval of aerosol optical depths (AODs) from sun-synchronous polar orbiting satellites, such as MODISs, VIIRSs, OMI, TROPOMI, etc., has been widely adopted as a method for obtaining information regarding particulate matter (PM) and related atmospheric processes. However, the advent of recently launched geostationary satellites, such as GOES-16/17/18, Himawari-8/9, and Meteosat Third Generation (MTG), has led to an increased temporal resolution of AOD observations (order of 10 minutes), resulting in typically one or more images per hour during daylight hours, compared to the once-per-day observations obtained from LEO satellites. By integrating these observations, the diurnal cycle of global AOD can be characterized at local, regional, and global scales. The scientific community is still examining the novel data from geostationary satellite observations and evaluating methods for effectively merging these observations with differing spatial and temporal resolutions. This presents a significant ""Big Data"" challenge, encompassing not only data storage, but also data discoverability, accessibility, and migration within cloud computing environments. This study presents our attempts at fusing Level 2 aerosol data from six satellites, three of which are geostationary (GOES-16/17 and Himawari-8) and three of which are polar orbiting (TERRA/MODIS, AQUA/MODIS, and SNPP-VIIRS), using the Dark Target aerosol retrieval algorithm. The ability to fuse remote sensing products on demand into desired temporal and spatial domains empowers researchers and practitioners to more efficiently work with satellite and sensor data. It is our hope that through making our open-source package and accompanying functionality available, the scientific community will have improved access to aerosol data processing resources.

Jennifer Wei↗
NASA NTRSDate not supplied

Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) Aeroshell Performance

On November 10, 2022, NASA launched the Low-earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) reentry vehicle (RV)as a secondary payload mounted inside the launch vehicle (LV) adaptor on an Atlas V 401 out of the Vandenburg Space Force Base (VSFB). The primary payload, Joint Polar Satellite System-2 (JPSS-2), was delivered successfully to a sun-synchronous trajectory shortly after launch, at which point the Centaur upper stage performed a burn to de-orbit the system. Once on the desired trajectory to enter the atmosphere, the top of the payload adaptor was ejected to expose the LOFTID RV. Next, the LOFTID aeroshell, a Hypersonic Inflatable Aerodynamic Decelerator (HIAD), was deployed and inflated without issue. The Centaur pointed the LOFTID RV to the desired attitude to enter the atmosphere, spun the assembly to three rpm, separated the LOFTID RV, and finally performed a divert maneuver to prevent the Centaur from re-contacting the LOFTID RV after atmospheric entry. The LOFTID RV maintained the design attitude and spin rate from separation to atmospheric entry, a duration of roughly 30 minutes, demonstrating the aeroshell did not experience any energy damping from inflatable structure flexibility. The LOFTID RV entered the atmosphere over Alaska at >8km/sec and decelerated as designed, demonstrating aerodynamically stable flight from hypersonic entry through subsonic parachute deployment. On-board visible-spectrum cameras captured the physical response of the heatshield through all phases of flight. Co-located infrared cameras captured the temperature distribution of the aftside of the heat shield anchored to a distribution of thermocouples on the inflatable structure (IS) in the field of view. Thermocouples were also embedded in the forward side of the aeroshell both in the Flexible Thermal Protection System (FTPS) as well as the IS. This paper will document aeroshell’s response to the atmospheric entry. The visible-spectrum cameras captured mechanical response of the deployable aeroshell to the loads encountered in the different phases of entry. Events seen on the visible-spectrum cameras correlate with the measurements of the load cell pins on webbing elements that attach the aeroshell to the centerbody structure. Thermocouple data captured verifies the aerothermal response of the aeroshell was in-kind with pre-flight analysis predictions although somewhat lower in most locations. This data will enable enhancement of HIAD predictive capability. Post-flight inspection of the aeroshell after splashdown and ocean recovery shows that all the aeroshell materials and manufacturing techniques developed over the past two decades of HIAD technology development performed as expected at large scale, a scale which cannot be replicated in ground test facilities. The LOFTID RV remained high in the water after touching down under parachute, and maintained buoyancy and integrity for the hour it took to position the recovery vessel near the vehicle after splashdown. There was no indication the HIAD would have experienced an issue maintaining buoyancy for many more hours after water impact as the component maintained adequate inflation pressure more than 24 hours after water extraction with no additional inflation gas in tanks, as the inflation gas remaining in the tank was purposely vented prior to splashdown.

HIAD↗
NASA NTRSDate not supplied

Navigation for the ACS3 Solar Sail Mission

NASA’s Advanced Composite Solar Sail System (ACS3) mission consists of a spacecraft that plans to be launched in early 2024. The spacecraft carries an 80 m2 solar sail that can produce effective thrust to alter the initial 1000 km sun-synchronous orbit. The main objective of the mission is to demonstrate the capabilities of the solar sail to effectively change various orbital parameters such as the semi-major axis and the inclination. Various composite materials were used to produce the sail, together with lightweight booms that will deploy from a 12U CubeSat bus. The astrodynamics team at NASA Ames Research Center has built a Flight Dynamics System (FDS) to provide mission navigation and to produce regular ephemeris once in orbit. The FDS can compute the trajectories that the spacecraft will perform once the sail is deployed. To achieve that, GPS data is obtained from the spacecraft telemetry and then is used with a Kalman filter and a smoother to obtain an orbit determination solution. The outcome of this process reduces the position and velocity uncertainty in a daily cadence. After that, the state vector output is used to feed a propagation model that includes the updated attitude and orbit of the spacecraft at that given moment. The trajectory model considers the updated attitude plan of the spacecraft as well as the environment conditions such as the solar weather to compute the associated drag and solar radiation pressure. This paper explains in detail the implementation of the FDS, as well as the solar sail solar radiation pressure trajectory model. We also present the results of several potential trajectory models under various assumptions of orbit parameters, attitude, environment, and material properties. In addition, we introduce a trajectory model for potential interplanetary use of an equivalent solar sail in the future. The outcome of this process will be critical to achieving the objective of determining effective altitude change produced by the solar sail.

Andres Dono Perez↗
NASA NTRSDate not supplied

Design and Qualification or the Low-Earth Orbit Flight Test of an Inflatable Decelerator(LOFTID) Payload Adapter Separation System (PASS)

On November 10, 2022, NASA and United Launch Alliance (ULA) launched Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) as a secondary payload on an Atlas V Centaur from Vandenburg Space Force Base (VSFB). After deploying the primary payload, JPSS-2, to a sun-synchronous orbit, the Centaur reoriented LOFTID for reentry, ejecting the Payload Adaptor to expose the stowed LOFTID reentry vehicle (RV). The Hypersonic Inflatable Aerodynamic Decelerator (HIAD) was then deployed and inflated, and the Centaur reoriented the RV to the desired entry attitude, spun the vehicle to roughly three rpm, and separated the reentry vehicle. After nearly half an orbit of free flight, LOFTID reentered the atmosphere at >8 km/sec, demonstrating stable flight from hypersonic entry through subsonic parachute deployment. A mission-unique Payload Adapter Separation System (PASS) enabled the successful LOFTID flight demonstration, allowing the launch vehicle to accommodate a superstack of two independent, similarly sized payloads. This paper discusses the design, development, and qualification of the LOFTID PASS along with lessons learned.

HIAD↗
NASA NTRSDate not supplied

Navigation for the ACS3 Solar Sail Mission

NASA’s Advanced Composite Solar Sail System (ACS3) mission consists of a spacecraft that plans to be launched no earlier than April 2024. The spacecraft carries an 81 m2 solar sail that can produce effective ΔV to alter the initial 1000 km sun-synchronous orbit. The main objective of the mission is to demonstrate the capabilities of the solar sail to effectively change the semi-major axis of its initial orbit. Various composite materials were used to produce the sail, together with lightweight booms that will deploy from a 12U CubeSat bus. The ACS3 navigation team at NASA Ames Research Center has built a Flight Dynamics System (FDS) to provide mission navigation and to produce regular ephemeris once in orbit. The FDS can compute the orbit transfers that the spacecraft will perform once the sail is deployed. To achieve that, GPS data is obtained from the spacecraft telemetry and then is used with a Kalman filter and a smoother to obtain an orbit determination solution. The outcome of this process reduces the position and velocity uncertainty in a daily cadence. After that, the state vector output is used to feed a propagation model that includes the updated attitude and orbit of the spacecraft at that given moment. The trajectory model considers the updated attitude plan of the spacecraft as well as the environment conditions such as the solar weather to compute the associated drag and solar radiation pressure. This paper explains in detail the implementation of the FDS, as well as the solar sail solar radiation pressure trajectory model. We also present the results of several potential trajectory models under various assumptions of orbit parameters, attitude, environment, and material properties. In addition, we introduce a trajectory model for potential interplanetary use of an equivalent solar sail in the future. The outcome of this process will be critical to achieving the objective of determining effective semi-major axis change produced by the solar sail.

Andres Dono↗
NASA NTRS2024

Parameterizing Spectral Surface Reflectance Relationships for the Dark Target Aerosol Algorithm Applied to A Geostationary Imager

Originally developed for the Moderate Resolution Imaging Spectroradiometer (MODIS) in polar, sun-synchronous low-earth orbit (LEO), the Dark Target (DT) aerosol retrieval algorithm relies on the assumption of a Surface Reflectance Parameterization (SRP) over land surfaces. Specifically for vegetated and dark-soiled surfaces, values of surface reflectance in blue and red visible-wavelength bands are assumed to be nearly linearly related to each other and to the value in a shortwave infrared (SWIR) wavelength band. This SRP also includes dependencies on scattering angle and a normalized difference vegetation index computed from two SWIR bands (NDVISWIR). As the DT retrieval algorithm is being ported to new sensors to continue and expand the aerosol data record, we assess whether the MODIS-assumed SRP can be used for these sensors. Here, we specifically assess SRP for the Advanced Baseline Imager (ABI) aboard, the Geostationary Operational Environmental Satellite (GOES)-16/East (ABIE). First, we find that using MODIS-based SRP leads to higher biases and artificial diurnal signatures in aerosol optical depth (AOD)retrievals from ABIE. The primary reason appears to be that geostationary orbit (GEO) encounters an entirely different set of observation geometry than does LEO, primarily with regards to solar angles coupled with fixed view angles. Therefore, we have developed a new SRP for GEO that draws the angular shape of the surface bidirectional reflectance. We also introduce modifications to the parametrization of both red-SWIR and blue-red spectral relationships to include additional information.The revised Red-SWIR SRP includes solar zenith angle, NDVISWIR, and land-type percentage from an ancillary database. The blue-red SRP adds dependencies on the scattering angle and NDVISWIR. The new SRPs improve the AOD retrieval of ABIE in terms of overall less bias and mitigation of the overestimation around local noon. The average bias of DT AOD compared to AERONET AOD shows a reduction from 0.08 to 0.03, while the bias of local solar noon decreases from 0.12 to 0.03.The agreement between DT and AERONET AOD is established through regression slope of 1.06 and y-intercept of 0.01with correlation coefficient is0.74. By using the new SRP, the percentage of data falling within the expected error range (±0.05 + 15%) is notably risen from 54% to 78%.

Mijin Kim↗
NASA NTRS2024

Advanced Libya-4 radiometric and atmospheric characterization utilizing MODIS and VIIRS full-scan reflective solar band measurements

The NASA Clouds and the Earth's Radiant Energy System (CERES) project provides observed flux and cloud products to the climate science community. The CERES instruments, along with the MODIS and VIIRS imagers, are onboard the Terra, Aqua, NPP, and NOAA20 satellites. In order to produce seamless multi-platform integrated products, long-term sensor stability and inter-calibration are required. Inter-calibration between sensors within the same sun-synchronous orbit relies on Earth invariant targets because simultaneous nadir overpasses are not possible. To facilitate inter-calibration efforts, the CERES Imager and Geostationary Calibration Group (IGCG) has improved the Libya-4 target characterization. Improvements include full scan angle characterization to enable daily observations, clear-sky identification using individual scan angle dynamic spatial homogeneity thresholds, and atmospheric corrections. The water vapor correction was found to be effective across the full scan, whereas the ozone and aerosol corrections were less effective. The atmospheric-corrected normalized radiance temporal fluctuations are similar across scan angles, spectral bands, and between the MODIS and VIIRS imagers, suggesting that the fluctuations are a result of the natural variability of the Libya-4 surface reflectance. The Libya-4 surface variability is more than likely caused by changes in the prevailing winds that alter sand dune orientation and resulting shadows. The full-scan-imager atmosphere and angle corrected reflected solar band radiance trend standard errors are between 0.6% and 1.0%, and for near-nadir observations, are between 0.5% and 0.8%. The advanced characterization suggests that the Libya-4 short-term surface reflectance anomalies may need to be considered for imager stability monitoring and inter-calibration efforts.

Libya-4 Pseudo-invariant Calibration Site↗
NASA NTRSDate not supplied

Inter-Calibrating CERES Instrument Fluxes Utilizing the CERES Instrument Geostationary Scan Mode Observations

The NASA Clouds and the Earth’s Radiant Energy System (CERES) project provides the scientific community observed top-of-atmosphere (TOA) fluxes to monitor the Earth’s energy imbalance and validate climate models. The CERES instruments onboard the Terra, Aqua, SNPP and NOAA-20 satellites need to be inter-calibrated to provide a continuous and consistent TOA flux record contained in the CERES Energy Balanced and Filled (EBAF) product. The SNPP and NOAA-20 satellites are positioned a half an orbit apart within the same sun-synchronous orbit (1:30 PM equatorial crossing time) thus preventing any direct time-matched observations. The CERES project designed the geostationary scan mode (GEOscan) to inter-calibrate the Geostationary Earth Radiation Budget (GERB) broadband measurement onboard the Meteosat 8-11 satellites. By rotating the orientation of the CERES instrument scan to match the angular configuration of the geostationary scan mode, the comparison of both angle and time matched observations suitable for inter-calibration is possible. To determine if the GEOscan mode is useful for inter-calibrating two CERES instruments placed in the same 16-day repeating orbit, the CERES project placed the Terra and Aqua CERES instruments in GEOscan mode once every 6 days over a rotation of five geostationary domains beginning in February 2023. The GEO imager narrowband to broadband derived radiances are used as transfer radiometers to compare the Terra and Aqua CERES observed radiances. Since both the Terra and Aqua CERES instruments are in GEOscan mode over the same GEO domain and day, the GEO imager calibration is expected to be consistent between the Terra and Aqua overpass times. Any GEO imager narrowband to broadband regional biases should be similar for the Terra and Aqua overpasses. The GEOscan mode Terra and Aqua CERES inter-calibration coefficients for both shortwave and longwave broadband radiances will be compared against the CERES instrument team’s coefficients to determine the viability of this approach. Improvements in the GEO imager narrowband to broadband approaches will also be investigated and verified within this framework.

Kyle Itterly↗
NASA NTRS2018

Annual Variations in Aqua's Mean Local Time and Inclination

This presentation will discuss the results of an investigation looking into the physical causes of the observed annual variations in Aqua's mean local time and inclination. This provides a deeper insight into the forces driving Aqua's orbit. It was found that the Sun and the Moon's gravitational effects combine to cause Aqua's inclination rate to vary, peaking around December of each year, and reaching a minimum around August of each year.

Aqua spacecraft↗