Search NASA⌕ Search

SEARCH · Search NASA

Results for “Synthesis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Thermal Processing Conditions for the Synthesis of Near Theoretical Density Li 5 La 3 Ta 2 O 12 Ceramics for Ceramic Dual-Mode Detectors

A family of Li-containing garnet compounds, extensively investigated for Li-ion solid electrolyte applications, show great potential to be developed into transparent ceramic dual-mode scintillators. In particular, Li 5 La 3 Ta 2 O 12 (LLTaO) shows promise as an efficient dual-mode scintillator due to its high Li content, high density, non-hygroscopicity, and high effective-Z. Often the synthesis of LLTaO ceramics involves solid state processing techniques starting with oxide and carbonate powders, calcining, sintering for the removal of residual porosity, and post-processing. This study focuses on two objectives: (1) establishing thermal processing boundary conditions for a flexible alkoxide-based sol-gel method for synthesizing fine-grained powders; and (2), consolidating powders via hot-pressing to form high-density ceramics. In this study, near single-phase ceramics were achieved by hot-pressing sol-gel powders with varying amounts of excess Li. Rietveld refinements were used to analyze X-ray diffraction data and provide a quantitative evaluation of the phases present in the hot pressed ceramics. Some of the diffraction data showed large low angle peak asymmetry, suggesting the presence of two cubic Li 5 La 3 Ta 2 O 12 garnet phases with different lattice parameters. Depending on the synthesis and processing conditions, the refinement revealed ~ 90 wt% concentration of a phase with a ≈ 12.8 Å and ~ 10 wt% concentration of a phase with a ≈ 12.9 Å, indicating a remaining excess of Li in the hot pressed ceramics in the large lattice parameter phase. These synthesis experiments allowed for the determination of a baseline for Li loss during hot-pressing. X-ray excited radioluminescence and photoluminescence excitation and emission spectra were obtained from the hot pressed ceramics. In conclusion, the measured emission spectra featured broad tantalate emission and line emissions likely from a rare-earth impurity.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Synthesis, sintering, and grain growth kinetics of Hf 6 Ta 2 O 17

Here Aasystematic study of the solid-state synthesis, pressureless sintering, and grain growth kinetics of Hf 6 Ta 2 O 17 is presented. The ideal conditions for solids-state synthesis of Hf 6 Ta 2 O 17 powder with minimal particle necking was 1250 °C for 2 h in air. The resultant powder has an average particle size of 210 ± 70 nm. The combined synthesis and ball-milling procedure produces highly sinterable Hf 6 Ta 2 O 17 powder, achieving > 97 % of theoretical density after pressureless sintering at 1600 °C for 2 h in air. The grain growth mechanism was sensitive to processing conditions, appearing to be primarily driven by surface diffusion below 1600 °C and grain boundary diffusion above 1650 °C. The respective activation energies for grain growth were found to be Q S = 659 ± 79 kJ mol -1 and Q GB = 478 ± 63 kJ mol -1 .

36 MATERIALS SCIENCE↗
DOE OSTI2020

A discrete integral transform for rapid spectral synthesis

Accurate synthetic spectra that rely on large Line-By-Line (LBL)-databases are used in a wide range of applications such as high temperature combustion, atmospheric re-entry, planetary surveillance and laboratory plasmas. Conventionally synthetic spectra are calculated by computing a lineshape for every spectral line in the database and adding those together, which may take multiple hours for large databases. In this paper we propose a new approach for spectral synthesis based on an integral transform: the synthetic spectrum is calculated as the integral over the product of a Voigt profile and a newly proposed three-dimensional “lineshape distribution function”, which is a function of spectral position and Gaussian- & Lorentzian width coordinates. A fast discrete version of this transform based on the Fast Fourier Transform (FFT) is proposed, which improves performance compared to the conventional approach by several orders of magnitude while maintaining accuracy. Strategies that minimize the discretization error are discussed. A Python implementation of the method is compared against state-of-the-art spectral code RADIS, and is since adopted as RADIS's default synthesis method. The synthesis of a benchmark CO2 spectrum consisting of 1.8 M spectral lines and 200k spectral points took only 3.1 s using the proposed method (1011 lines × spectral points/s), a factor ~300 improvement over the state-of-the-art, with the relative improvement generally increasing for higher number of lines and/or number of spectral points. Finally, an experimental GPU-implementation of the method was also benchmarked, which demonstrated another 2~3 orders performance increase, achieving up to 5 ∙ 10 14 lines × spectral points/s.

42 ENGINEERING↗
DOE OSTI2023

Synthesis of Na + -gated nanochannel membranes for the ammonia (NH 3 ) separation

Na + -gated nanochannel membranes were synthesized on α-Al 2 O 3 supports by secondary growth for ammonia (NH 3 ) separation from a mixture gas containing NH 3 , hydrogen (H 2 ) and nitrogen (N 2 ) at high temperature and pressure. Here, the effects of synthesis parameters (number of seeding steps, aging time, synthesis time, and Si/Al ratio) on membrane properties were investigated by characterization and gas permeation testing. Under the optimized condition (two-time seeding, 8 h aging time, 5 h synthesis time, and gel composition of 1.05 Al 2 O 3 : 5 SiO 2 : 50 Na 2 O: 100 H 2 O), the best membranes achieved NH 3 /H 2 and NH 3 /N 2 selectivities of 328 ± 60 and 1106 ± 207, respectively at 200 °C and 21 bar. Separation performance of the membrane was shown to be highly dependent on the permeances of N 2 and H 2 , which were greatly influenced by the membrane quality.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Facile microwave synthesis of zirconium metal-organic framework thin films on gold and silicon and application to sensor functionalization

Zirconium-based metal-organic frameworks, including UiO-66 and related frameworks, have become the focus of considerable research in the area of chemical warfare agent (CWA) decontamination. However, little work has been reported exploring these metal-organic frameworks (MOFs) for CWA sensing applications. For many sensing approaches, the growth of high-quality thin films of the active material is required, and thin film growth methods must be compatible with complex device architectures. Several approaches to synthesize thin films of UiO-66 have been described but many of these existing methods are complex or time consuming. In this work, we describe the development of a simple and rapid microwave assisted synthesis of oriented UiO-66 thin films on unmodified silicon (Si) and gold (Au) substrates. Thin films of UiO-66 and UiO-66-NH 2 can be grown in as little as 2 min on gold substrates and 30 min on Si substrates. The film morphology and orientation are characterized and the effects of reaction time and temperature on thin film growth on Au are investigated. Both reaction time and temperature impact the overgrowth of protruding discrete crystallites in the thin film layer but, surprisingly, no strong correlation is observed between film thickness and reaction time or temperature. We also briefly describe the synthesis of Zr/Ce solid solution thin films of UiO-66 on Au and report the first synthesis of a solid solution thin film MOF. Finally, we demonstrate the utility of the microwave method for the facile functionalization of two sensor architectures, plasmonic nanohole arrays and microresonators, with UiO-66 thin films.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Stoichiometric metal nitration based novel green synthesis of mesoporous metal oxides and their enhanced heterogeneity

Here, in this work, a general and novel method for the green synthesis of mesoporous metal oxides via stoichiometric metal nitration has been demonstrated. Pluronic surfactants and their effect on synthesis procedures in terms of surface area have been experimentally studied in detail. Contrary to the traditional synthesis procedure, water has been utilized as the solvent and in several cases, such as tin oxide, manganese oxide, aluminum oxide, antimony oxide, zinc oxide, cobalt oxide, copper oxide, yttrium oxide, lanthanum oxide, and silver either the highest or comparable surface areas have been successfully synthesized. Through XRD, and TEM, all materials were observed to be crystalline except silver and magnesium oxide. SEM shows that with an increase in surfactant molar mass agglomeration decreases. Ammonia chemisorption on acidic materials gives quantitative amounts of ammonia chemical bonding with catalysts, whereas carbon dioxide chemisorption gives a quantitative value of CO 2 chemical binding with basic sites. As high as 1901.8 μmol/g and 994.6 μmol/g ammonia chemisorption values for oxides of vanadium and tin were achieved. Amphoteric materials give both acidic and basic enhanced adsorption. Finally, all synthesized materials are studied under organic catalytic transformations. Benzyl bromide is theoretically more active compared with benzylamine and benzyl alcohol which was also experimentally shown through the conversion.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Rational synthesis of high-performance Ni-rich layered oxide cathode enabled via probing solid-state lithiation evolution

Lithium (Li)-ion batteries using nickel (Ni)-rich layered oxide cathode have been pursued with interest due to high practical energy density. A fundamental understanding of the reaction pathways and structural evolution of the solid-phase synthesis of these materials is crucial for their rational design and process development for mass production. In this work, structural evolution during solid-state synthesis was traced via in situ technique, with a particular emphasis on the lithiation reaction and migration of transition metal (TM) ions. The sintering process is governed by the competitive relationship of decomposition and lithiation reactions, which can be regulated through temperature windows. Controlling the melting point of the Li sources, as well as their affinity to cathode precursors, is highly desired to maintain the layered ordering of TM ions throughout the whole synthesis process, which simplifies the manufacturing process and improves the quality of the manufactured cathode material.

25 ENERGY STORAGE↗
DOE OSTI2025

Rapid Screening of Single-Atom Catalyst Synthesis Conditions Using ToF-SIMS and Facet-Dependent Single-Crystal Substrates

Single-atom catalysts (SACs) offer superior catalytic performance compared to traditional nanoparticle catalysts but are challenging to develop because of the need for extensive optimization and specialized characterization techniques. Here, this study presents a rapid and versatile method for detecting synthesis conditions and elucidating deposition mechanisms of SACs on various substrates. By depositing active elements (Au, Cu, Ni and Rh) on facet-specific single-crystalline substrates (CeO 2 , TiO 2 , MgO and Al 2 O 3 ) and employing time-of-flight secondary ion mass spectroscopy (ToF-SIMS), we assessed facet-dependent deposition behaviors and identified optimal conditions for solution-based SAC synthesis. On CeO 2 and TiO 2 , we confirmed facet-dependent deposition, primarily influenced by oxygen vacancy density and photocatalytic activity, respectively. MgO exhibited the formation of metal oxide/hydroxide clusters for all active elements, and the degree of clustering for Cu and Ni was correlated with the facet hydrolysis susceptibility. Notably, Au and Rh deposition on MgO was facet-independent, attributed to the formation of hydroxide species in solution. Al 2 O 3 , due to its chemical stability and lack of surface defects, did not show active element deposition. This study not only provides a time and cost-efficient method for prescreening SAC synthesis conditions, but it also provides valuable insights into the various deposition mechanisms governing SAC formation on different substrates, paving the way for the rational design of tailored SACs for various catalytic applications.

ToF-SIMS↗
DOE OSTI2021

High-Pressure Synthesis of Bulk Cobalt Cementite, Co 3 C

Transition metal carbides find use in a wide range of advanced high-resilience applications including high-strength steels, heat shields, and deep-earth drills. However, carbides of the mid-to-late transition metals remain difficult to isolate and characterize on account of their metastability, which precludes the preparation of high-quality bulk single crystal samples using traditional solid-state methods. Herein, we report a combined computational and experimental survey of the cobalt-carbon binary system under high pressures and demonstrate that pressure offers a route toward the bulk synthesis of the metastable cementite-type cobalt carbide, Co 3 C, which under ambient conditions can only be prepared in low-dimensional thin film or nanoparticle forms. First-principles calculations reveal two competitive low-energy stoichiometric phases under ambient pressures - Pnnm-Co 2 C (Fe 2 C-type) and Pnma-Co 3 C (Fe 3 Ctype) - consistent with the known low-dimensional phases that have been studied for their promising magnetic properties. However, the calculated formation enthalpy of Pnma-Co 3 C decreases steadily with the applied pressure, while that of Pnnm-Co 2 C increases. Here, we pursue these results using high-pressure laser-heated synthesis methods coupled with in situ X-ray diffraction and observe the formation of Pnma-Co 3 C above 4.8 GPa. We determine the experimental bulk modulus of Co 3 C to be K o = 237 GPa (K p = 4.0). First-principles calculations of the phonon modes in Co 3 C reveal dynamical instabilities at ambient pressure that are absent under compression. These results offer a promising new route for the synthesis of rare-earth-free magnets.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Reaction Mechanism of the Synthesis of a Disordered Rock Salt Cathode Material

Li-rich disordered rock salt (DRX) materials have recently emerged as a class of promising cathode materials for cobalt- and nickel-free Li-ion batteries that can achieve a high energy density and high electrochemical storage capacity. Here, the synthesis conditions of DRX were found to have a significant impact on the electrochemical performance of the final product formed and hence need to be carefully controlled. To date, the formation pathway of DRX materials has remained largely unexplored. In this work, the phase evolution of a DRX material, Li 1.1 Mn 0.8 Ti 0.1 O 1.9 F 0.1 (LMTF1811), during solid-state synthesis, was monitored using in situ synchrotron X-ray diffraction (sXRD). We have observed several crystalline intermediates formed during the synthesis process before the full formation of DRX. Ex situ X- ray absorption spectroscopy (XAS) was used to assess the local structure and charge states of the transition metals. F K-edge XAS collected from the final product LMTF1811 shows that the degree of F incorporation into the DRX phase is low.

Diffraction↗
DOE OSTI2025

Synthesis, Stability, and Magnetic Properties of Antiperovskite Co 3 PdN

Experimental synthesis and characterization of theoretically predicted compounds are important steps in the materials discovery pipeline. Here, we report on the synthesis of Co 3 PdN, which was recently predicted to be a stable magnetic antiperovskite. The Co 3 PdN thin films were grown by reactive sputtering and were confirmed to form in an antiperovskite crystal structure. The thermal stability of the compound is demonstrated up to 600 K by in situ X-ray diffraction, though the phase persists at slightly higher temperatures (700 K) in an air-free magnetometer. Both ab initio calculations and magnetization measurements find Co 3 PdN to be ferromagnetic with an experimentally determined Curie temperature of T C = 560 ± 5 K. The saturation magnetization of 1.2 μ B /Co found in the experiment is slightly lower than the 1.7 μ B /Co value expected by theory. A narrow magnetic hysteresis loop with a coercive field of 100 Oe at low temperature suggests that Co 3 PdN might be useful in electronic applications requiring fast switching of the magnetization vector. While prior prediction of Co 3 PdN showed a gapped electronic band structure for each spin channel, we show that this was due to incomplete sampling of Brillouin zone paths and that band crossings exist along R-X|M and X|M-R paths. The metallic nature of Co 3 PdN is further confirmed by temperature-dependent transport measurements, which also show a considerable anomalous Hall effect. Altogether, this work represents an appreciable step toward understanding the synthesis, structure, stability, and properties of a new magnetic material.

14 SOLAR ENERGY↗
DOE OSTI2026

Probing the Mechanism of Cadmium Sulfide Cluster Nucleation and Growth via Sequential Infiltration Synthesis

Few-atom metal chalcogenide clusters may be realized through the sequential infiltration of metal–organic precursors in polymer films. However, the underlying nucleation and growth mechanisms that allow for cluster synthesis with near atomic-scale precision are not fully resolved. The kinetics of the sequential infiltration synthesis (SIS) method that control the nucleation and growth mechanisms of primarily Cd 4 S 4 -core clusters within a poly­(4-vinylpyridine) (P4VP) matrix are probed with in situ UV–visible absorbance spectroscopy. Density functional theory (DFT) calculations that allow simulation of the optical properties of cluster fragments further reveal the thermodynamics that guide cluster growth within the P4VP matrix. Here, we conclude that a reactive capture mechanism for cluster nucleation and growth is dominant, although transient dimethyl cadmium adduction to the polymer backbone may contribute to cluster nucleation under shorter metal–organic purge process conditions. Grazing incidence X-ray diffraction (GI-XRD) and X-ray absorption spectroscopy (XAS) analyses further corroborate the cluster size and atom connectivity throughout the stepwise synthesis.

Jayaweera, Nuwanthaka P. [Argonne National Laborat↗
DOE OSTI2025

Synthesis of Layered Gold Tellurides AuSbTe and Au 2 Te 3 and Their Semiconducting and Metallic Behavior

Previous studies on natural samples of pampaloite (AuSbTe) revealed the crystal structure of a potentially cleavable and/or exfoliable material, while studies on natural and synthetic montbrayite (Sb-containing Au 2 Te 3 ) claimed various chemical compositions for this low-symmetry compound. Few investigations of synthetic samples have been reported for both materials, leaving much of their chemical, thermal, and electronic characteristics unknown. Here, in this study, we investigate the stability, electronic properties, and synthesis of the gold antimony tellurides AuSbTe and Au 1.9 Sb 0.46 Te 2.64 (montbrayite). Differential thermal analysis and in situ powder X-ray diffraction revealed that AuSbTe is incongruently melting, while Au 1.9 Sb 0.46 Te 2.64 is congruently melting. Calculations of the band structures and four-point resistivity measurements showed that AuSbTe is a semiconductor and Au 1.9 Sb 0.46 Te 2.64 a metal. Various synthesis attempts confirmed the limited stable chemical composition of Au 1.9 Sb 0.46 Te 2.64 , identified successful methods to synthesize both compounds, and highlighted the challenges associated with single-crystal synthesis of AuSbTe.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Investigation of Complex Intermediates in Solvent-Mediated Synthesis of Thiophosphate Solid-State Electrolytes

Lithium thiophosphates represent a promising class of solid Li + conductors for all-solid-state batteries. Scalable solvent-mediated synthesis routes for several Li–P–S ternary compounds have been reported, but little is known regarding the reaction mechanism of such pathways. This work demonstrates that solvent-mediated synthesis of lithium thiophosphate solid electrolytes from mixtures of Li 2 S and P 2 S 5 proceeds through a highly soluble P 2 S 6 2– intermediate. This intermediate exhibits virtually the same Raman spectra in several solvents including acetonitrile, methyl acetate, ethyl acetate, ethyl propionate, dimethoxyethane, tetraethylene glycol dimethyl ether, and tetrahydrofuran. Additionally, based on this universal intermediate, a general reaction mechanism is proposed for the solvent-mediated synthesis of several lithium thiophosphates including (LiPS 3 ) n , Li 2 P 2 S 6 , Li 7 P 3 S 11 , and Li 3 PS 4 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Continuous Fly-Through High-Temperature Synthesis of Nanocatalysts

Conventional thermal treatment system, such as muffle and tube furnaces, typically feature low ramping and cooling rates, which lead to steep thermal gradients during bulk material synthesis that generate inefficient, non-uniform reaction conditions and result in nanoparticle aggregation. Herein, we demonstrate a continuous fly-through material synthesis approach using a novel high-temperature reactor design based on the emerging thermal-shock technology. By facing two sheets of carbon paper with a small distance apart (1–3 mm), we are able to generate uniform, ultra-high temperatures that can reach up to 3200 K within 50 ms by simply applying a voltage of 15 V. We can control this high-temperature to enable ultrafast chemical reactions by continuously feeding raw materials through the device from one end to the other, allowing the final products to be rapidly collected. As a proof-of-concept demonstration, we synthesized Pt nanocatalysts ~4 nm in size anchored to carbon black via this fly-through high-temperature reactor at ~1400 K. Furthermore, we find these supported Pt nanoparticles feature excellent electrocatalytic activities toward methanol oxidation reaction. Compared to existing heating methods, this continuous fly-through high temperature reactor offers a new and highly efficient platform for the synthesis of nanomaterials at high temperatures.

Qiao, Yun↗
DOE OSTI2020

Microfluidic, One-Batch Synthesis of Pd Nanocrystals on N-Doped Carbon in Surfactant-Free Deep Eutectic Solvents for Formic Acid Electrochemical Oxidation

One of the grand challenges that impedes practical applications of nanomaterials is the lack of robust manufacturing methods that are scalable, cheap, and environmentally friendly. In this work, we address this challenge by developing a microfluidic approach that produces surfactant-free Pd nanocrystals (NCs) uniformly loaded on N-doped porous carbon in a one-batch process. The deep eutectic solvent (DES) prepared from choline chloride and ethylene glycol was employed as a novel synthesis solvent, and its extended hydrogen networks and abundant ionic species effectively stabilize Pd facets and confine nanocrystal sizes without using surfactants. The microreactors provide faster heat exchange and more uniform mass transport, which in combination with DES produced Pd NCs with better-defined shape and predominately exposed Pd (100) facet. Furthermore, we describe that the N-doped functional groups in porous carbon direct dense and uniform heterogeneous growth of Pd NCs in a one-batch process, thereby eliminating a separate catalyst deposition step that is often involved in conventional synthesis. The Pd NCs in the one-batch-produced Pd/C catalysts exhibited a size distribution of similar to ~13 ± 3.5 nm and a high ESCA of 46.0 m 2 /g and delivered 362 mA/mg for formic acid electrochemical oxidation with improved stability, demonstrating the unique potentials of microfluidic reactors and DES for the controllable and scalable synthesis of electrocatalyst materials for practical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

One-Step Synthesis and Operando Electrochemical Impedance Spectroscopic Characterization of Heterostructured MoP–Mo 2 N Electrocatalysts for Stable Hydrogen Evolution Reaction

Here this study presents a novel synthesis of self-standing MoP and Mo 2 N heterostructured electrocatalysts with enhanced stability and catalytic performance. Facilitated by the controlled phase and interfacial microstructure, the seamless structures of these catalysts minimize internal resistivity and prevent local corrosion, contributing to increased stability. The chemical synthesis proceeds with etching step to activate the surface, followed by phosphor-nitriding in a chemical vapor deposition chamber to produce MoP-Mo 2 N@Mo heterostructured electrocatalysts. X-ray diffraction analyses confirm the presence of MoP, Mo 2 N, and Mo phases in the electrocatalyst. Morphology studies using scanning electron microscopy characterizes the hierarchical growth of structures, indicating successful formation of the heterostructure. X-ray photoelectron spectroscopy (XPS) analyses of the as-synthesized and post-catalytic activity samples reveal the chemical shift in terms of binding energy (BE) of Mo 3d XPS peak, especially after catalytic activity. The XPS BE shifts attributed to changes in oxidation state, electron transfer, and surface reconstruction during catalysis. Electrochemical evaluation of the catalysts demonstrates the superior performance of the MoP-Mo 2 N@Mo heterostructured catalyst in hydrogen evolution reactions (HER), with lower overpotentials and enhanced Tafel slopes. Stability tests reveal changes in double layer capacitance over time, suggesting surface reconstruction and increased active surface area during catalysis. Operando electrochemical impedance spectroscopy (EIS) further elucidates the dynamic changes in resistance and charge transfer during HER. Overall, comprehensive understanding of the synthesis, characterization, and electrochemical behavior of the developed MoP-Mo 2 N@Mo heterostructured electrocatalyst as presented in this paper highlights their potential utilization in sustainable energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Plasma Synthesis of Spherical Crystalline and Amorphous Electrolyte Nanopowders for Solid-State Batteries

Here, we demonstrate the theory-guided plasma synthesis of high purity nanocrystalline Li 3.5 Si 0.5 P 0.5 O 4 and fully amorphous Li 2.7 Si 0.7 P 0.3 O 3.17 N 0.22 . The synthesis involves the injection of single or mixed phase precursors directly into a plasma torch. As the material exits the plasma torch, it is quenched into spherical nanocrystalline or amorphous nanopowders. This process has virtually zero Li loss and allows for the inclusion of N, which is not accessible with traditional synthesis methods. Finally, we further demonstrate the ability to sinter the crystalline nanopowder into a dense electrolyte membrane at 800 °C, well below the traditional 1000 °C required for a conventional Li 3.5 Si 0.5 P 0.5 O 4 powder.

25 ENERGY STORAGE↗