Search NASA⌕ Search

SEARCH · Search NASA

Results for “Systematic process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Measurement of Plutonium Ratios for CRM 137A Recertification

This report documents the analytical methodologies used by the Chemical and Isotopics Mass Spectrometry (CIMS) Group at the US Department of Energy’s Oak Ridge National Laboratory (ORNL) for plutonium isotopic ratio characterizations on purified ~1 mg units prepared by Lawrence Livermore National Laboratory (LLNL) from a mother solution created from an existing 250 mg unit of certified reference material (CRM) 137. The analytical processes described are designed to maintain traceability of the final certified attributes and to eliminate sources of systematic bias for the measurements described. The measurands for certification are the plutonium isotope ratios: 238 Pu/ 239 Pu, 240 Pu/ 239 Pu, 241 Pu/ 239 Pu, and 242 Pu/ 239 Pu. The preparation and analytical process included the following activities: Preparation of reference materials to be used as calibrants to establish traceability to the SI unit of mass for the isotopic analyses and quality controls. For the plutonium isotopic analyses, CRM 128 (a CRM comprising equal atoms of 239 Pu and 242 Pu) was used as the primary calibrant; Each CRM 137A unit was reconstituted using dilute high-purity HNO3. From each, seven replicates were distributed for the isotopic characterizations by thermal ionization mass spectrometry (TIMS) using the total evaporation (TE) method for isotope ratio measurements and MC-ICP-MS using a dynamic peak hooping method for secondary isotope ratio measurements; Due to time delay in the analyses from the last purification of the original CRM 137 mother solution by LLNL, an aliquot of the three provided plutonium units was purified using Eichrom TEVA separation methods to remove americium in-growth and uranium impurities; Minimally corrected data were reported from each analysis using reporting templates provided by the New Brunswick Laboratory Program Office (NBL PO) for the specific methods used for isotopic measurements. In addition, a copy of the instrument exports, Excel templates for isotopic data corrections, and the uncertainty budgets completed with the GUM Workbench software package were submitted to NBL PO.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2023

Machine Learning technique for isotopic determination of radioisotopes using HPGe γ-ray spectra

γ-ray spectroscopy is a quantitative, non-destructive technique that may be utilized for the identification and quantitative isotopic estimation of radionuclides. Traditional methods of isotopic determination have various challenges that contribute to statistical and systematic uncertainties in the estimated isotopics. Furthermore, these methods typically require numerous pre-processing steps, and have only been rigorously tested in laboratory settings with limited shielding. Here, in this work, we examine the application of a number of machine learning based regression algorithms as alternatives to conventional approaches for analyzing γ-ray spectroscopy data in the Emergency Response arena. This approach not only eliminates many steps in the analysis procedure, and therefore offers potential to reduce this source of systematic uncertainty, but is also shown to offer comparable performance to conventional approaches in the Emergency Response Application.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Insights into the Biogeochemical Cycling of Cobalt: Precipitation and Transformation of Cobalt Sulfide Nanoparticles under Low-Temperature Aqueous Conditions

Cobalt sulfide precipitates, key phases in the natural biogeochemical cycling of cobalt and in relevant remediation and resource recovery processes, remain poorly defined under low-temperature aqueous conditions. Here, we systematically studied the Co-(Fe) sulfides precipitated and aged in environmentally relevant solutions, defined by different combinations of pH, initial cobalt-to-iron ratios ([Co] aq /[Fe] aq ), with/without S 0 , and the presence/absence of sulfate-reducing bacteria. The initial abiogenic precipitates without Fe aq were composed exclusively of amorphous Co-sulfide hydrates (CoS· x H 2 O), whose estimated log K* was three orders of magnitude higher than that previously reported for crystalline Co-sulfides. The addition of S 0 , in combination with acidic pH and elevated temperature (60°C), resulted in the recrystallization of the amorphous precipitates into nanocrystalline jaipurite (hexagonal CoS) within one month (which otherwise remained stable for up to two months). In the presence of Fe(II) aq , the abiogenic precipitates were composed of more crystalline Co-sulfide hydrates and/or Co-rich mackinawite, the exact phase being dependent on the specific [Co] aq /[Fe(II)] aq . The biogenic precipitates displayed higher crystallinity for Co sulfides (up to the formation of nanocrystalline cobalt pentlandite, Co 9 S 8 ) and lower crystallinity for Co-rich mackinawite, suggestive of mineral-specific bacterial interaction. The revealed precipitation and transformation pathways of Co-(Fe-)sulfides in this study allows for predicting the prevalent Co-bearing phases in various natural and engineered environments.

58 GEOSCIENCES↗
DOE OSTI2022

The impact of isospin dependence of pairing on fission barriers in the fission cycling regions

A systematic analysis of the ground state and fission properties of actinides and superheavy nuclei important for the r process modeling has been performed within the framework of covariant density functional theory for the first time in Ref. A brief review of the results related to the heights of primary fission barriers and systematic uncertainties in their prediction is presented. In addition, new results on the potential impact of the isospin dependence of pairing on fission barriers in fission cycling regions is provided for the first time.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Benchmarking performance changes in the simulation of extratropical modes of variability across CMIP generations

In this work, we evaluate extratropical modes of variability in the three most recent phases of the Coupled Model Intercomparison Project (CMIP3, 5, and 6) to gauge improvement of climate models over time. A suite of high-level metrics is employed to objectively evaluate how well climate models simulate the qobserved Northern Annular Mode (NAM), North Atlantic Oscillation (NAO), Pacific North America pattern (PNA), Southern Annular Mode (SAM), Pacific Decadal Oscillation (PDO), North Pacific Oscillation (NPO), and North Pacific Gyre Oscillation (NPGO). We apply a Common Basis Function (CBF) approach that projects model anomalies onto observed empirical orthogonal functions (EOFs), together with the traditional EOF approach, to CMIP Historical and AMIP models. We find simulated spatial patterns of those modes have been significantly improved in the newer models, although the skill improvement is sensitive to the mode and season considered. We identify some potential contributions to the pattern improvement of certain modes (e.g., the Southern Hemisphere jet and High-top vertical coordinate), however the performance changes are likely attributed to gradual improvement of the base climate and multiple relevant processes. Less performance improvement is evident in the mode amplitude of these modes and systematic overestimation of the mode amplitude in spring remains in the newer climate models. We find that the post-dominant season amplitude errors in atmospheric modes are not limited to coupled runs but are often already evident in AMIP simulations. This suggests that rectifying the egregious post-dominant season amplitude errors found in many models can be addressed in an atmospheric-only framework making it more tractable to address in the model development process.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Systematic study of radioluminescence and light propagation effects in scintillating nanoguide materials

Nanoguide optical waveguides are thermally processed materials based on polymers that have different refractive indices. Scintillating versions of these materials have been under development since 2019 and feature PMMA as the low refractive index constituent and Organic Glass Scintillator-polymer blends as the high index component. Characterization efforts to date have focused on the functional characteristics of nanoguide pertaining to its envisioned use in high-resolution transmission radiography applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

HiFiPDV2 v. 2

SAND2024-01061O The HiFiPDV-2 software is similar to other photonic Doppler velocimetry (PDV) analysis codes in that it converts signals from intensity-time space to frequency-time space using a short-time Fourier transform (STFT). It then analyzes peaks of the resulting power spectral density information to extract the velocity-time history. The unique aspects of HiFiPDV and HiFiPDV-2 are that this reduction process is repeated for an array of reasonable STFT input variables. The resulting population distribution of output velocity-time histories is evaluated to determine the most likely velocity history and its associated uncertainty. This uncertainty is defined as the systematic uncertainty of the PDV signal as it is a function of input values to the reduction process. The HiFiPDV-2 program brings new functionality and efficiency to these calculations—most notably significant reductions in memory usage and calculation times, the ability to evaluate frequency-shifted signals, and the ability to filter out baseline signals. Developers recommend that users have at least 2 GB of RAM per CPU core in their system. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Voorhees, Travis↗
DOE OSTI2020

Magnesium Technology 2020

Magnesium and its alloys are being investigated widely for applications that require extraordinarily high strength-to-weight ratio, vibration damping, electromagnetic shielding, reduction in carbon footprint, sustainability improvements, and low toxicity. In the past decade or so, this drive has led to increased adoption of magnesium and its alloys in everyday products and it is no longer regarded as an esoteric material. The overarching goal of its widespread adoption and replacement of conventional materials such as steel and aluminum alloys has been restricted because of the cost of the material, limited sources of primary material, alloying constraints, high chemical reactivity, and challenges associated with its plasticity. Researchers, scientists, engineers, and economists from industry, government agencies and laboratories, and academic institutions alike are actively developing roadmaps for next-generation products and addressing these challenges as quickly as possible through unique and innovative methods. The TMS Magnesium Committee has been actively involved in providing a platform to these entities for disseminating the latest information, developments, and cutting-edge research and development, and showcasing the latest research and development trends related to magnesium and its alloys through the Magnesium Technology Symposium, which takes place every year at the TMS Annual Meeting. This proceedings volume retains the essence of this longstanding tradition. The twenty-first volume in the series, Magnesium Technology 2020, is the proceedings of the Magnesium Technology Symposium held during the 149th TMS Annual Meeting & Exhibition in San Diego, CA, February 23–27, 2020. The volume captures commentaries and papers from 15 different countries. The papers have been categorized systematically based on topics pertaining to magnesium production, casting and solidification, thermomechanical processing, deformation mechanisms, modeling, corrosion, and applications. The symposium began with keynote sessions that featured several distinguished invited speakers from government organizations and academia, who provided their perspectives on the state of the art, goals, and opportunities in magnesium alloy research and development. Dr. Carlos Tomé from Los Alamos National Laboratory, U.S. Department of Energy, discussed 3D characterization of mechanical twins across grain boundaries. This was followed by a talk on hierarchically structured ultrafine-grained magnesium alloys by Dr. Rajiv Mishra from the University of North Texas, USA, who presented an example of using friction stir additive manufacturing for implementing such microstructures at a component level. Dr. Mark Horstemeyer from Liberty University, USA, presented an overview of fatigue modeling to capture the corrosion-fatigue behavior of magnesium alloys. The final talk in this session was presented by Dr. Bin Jiang from Chongqing University, China, who presented a novel extrusion approach for achieving high-strength magnesium alloy plates.

Jordon, J. Brian↗
DOE OSTI2022

Next-to-leading power endpoint factorization and resummation for off-diagonal “gluon” thrust

The lack of convergence of the convolution integrals appearing in next-to-leading-power (NLP) factorization theorems prevents the applications of existing methods to resum power-suppressed large logarithmic corrections in collider physics. We consider thrust distribution in the two-jet region for the flavour-nonsinglet off-diagonal contribution, where a gluon-initiated jet recoils against a quark-antiquark pair, which is power-suppressed. With the help of operatorial endpoint factorization conditions, we obtain a factorization formula, where the individual terms are free from endpoint divergences in convolutions and can be expressed in terms of renormalized hard, soft and collinear functions in four dimensions. This allows us to perform the first resummation of the endpoint-divergent SCETI observables at the leading logarithmic accuracy using exclusively renormalization-group methods. The presented approach relies on universal properties of the soft and collinear limits and may serve as a paradigm for the systematic NLP resummation for other 1 → 2 and 2 → 1 collider physics processes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Temperature Dependent Early-Stage Oxidation Dynamics of Cu(100) Film with Faceted Holes

Fundamental understanding of surface oxidation dynamics is critical for rational corrosion protection and advanced manufacturing of nanostructured oxides. In situ environmental TEM (ETEM) provides high spatial (nano- to atomic- scale) and temporal (< 0.1 s) resolution to investigate the early-stage oxidation/corrosion dynamics of metals and alloys. Thin samples with facets are widely used to enable cross-sectional observation of the oxidation dynamics in ETEM. However, how different facet orientations oxidize under the same conditions, and how these facets change the oxidation process, has not been investigated before. Here, using in situ ETEM, we systematically compare the oxidation dynamics of Cu(001) thin films, with faceted holes exposing {100} and {110} facets at temperatures ranging from 250–600 °C under 0.03 Pa O 2 . Oxidation preference is observed to change, from Cu(110) facets at lower temperatures to Cu(100) facets at ~ 500 °C. Oxide growth mechanisms change from outward growth on Cu 2 O surfaces at low temperatures, to inward growth on Cu-Cu 2 O interfaces at high temperatures. At high temperatures (500–600 °C), a rod-like Cu 2 O morphology is observed, with side facets of ~ {024} and top facets of {100} on Cu(100). This differs from the square-shaped Cu 2 O exposing {110} facets formed on Cu(001) surfaces. Rod-like oxides exhibit directional growth along their lengths with linear growth rates, regardless of rod length and width. This suggests that O from Cu(001) surfaces, rather than Cu(100) facets, serves as an O source for oxide growth. These results show a direct comparison of oxidation at different orientations with temperature, underscoring the temperature dependence of oxidation preference. Our results also suggest future in situ ETEM experiments viewing oxidation corrosion cross-sectionally should be cautious when oxide size is comparable with sample thickness, as the oxidizing mechanism may change due to sample thickness.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Investigation on the AgPt and AgPd hybrid alloy nanoparticles (HANPs) for the hybrid MoS 2 /ZnO/HANP UV photodetector application

We report hybrid photodetectors made of two or more nanomaterial components can offer the high potential for advanced photodetection applications with enhanced light absorption, improved efficiency and structural tunability. A hybrid UV photodetector (PD) configuration incorporating the plasmonic hybrid alloy nanoparticles (HANP), ZnO quantum dots (QDs) and MoS 2 nanoflakes, namely MoS2/ZnO/HANP PD, is demonstrated. The optimized MoS 2 /ZnO/HANP PD exhibits a high photocurrent of 5.66 mA at 0.34 mW/mm 2 under 385 nm illumination with two orders of improvement from the bare ZnO, which is one of the highest photocurrents by the ZnO-based PDs. It also demonstrates high figure-of-merits with the responsivity of 14,523 mA/W, detectivity of 8.13 x 10 11 jones, and external quantum efficiency (EQE) of 4,680 %, outperforming most of the ZnO-based hybrid architectures. The enhanced photoresponse is primarily attributed to the significantly enhanced hot electron generation by the AgPd HANPs and photocarrier collection through the ZnO QD layer. MoS 2 nanoflakes also provide additional photon absorption sites and boost the photo-carrier transfer process. HANPs are grown by adapting a dual-step solid-state dewetting process (SSD) approach and the superiority of AgPd HANPs is confirmed by systematic investigation, FDTD simulation and comparison of AgPt and AgPd HANPs.

MoS2↗
DOE OSTI2025

Mesoscale modeling of restructuring in high burnup UO 2 fuel

Here, this work aims to simulate the restructuring behavior observed in different regions of high burnup fuel, providing a first-of-its-kind restructuring model for the dark zone and rim region of high-burnup UO 2 fuel. We employed a grand-potential-based phase-field model to concurrently evaluate subgrain formation and the growth of fission gas bubbles within the fuel. An energy-based subgrain formation criterion was introduced to simulate the restructuring process. The effects of different initial conditions and different modeling parameters were systematically studied to capture how each of these parameters influences the characteristics of the restructured fuel. Subgrain formation was observed to begin around existing fission gas bubbles and proceed toward triple junctions, grain boundaries, and grain interiors. Restructuring was demonstrated to be influenced by a combination of initial dislocation densities, burnup rate, subgrain formation rate, and temperature. Under a given subgrain formation rate, the rate of restructuring increases with rising fuel temperature. A restructuring bias was observed within the microstructure, due to the variation in defect accumulation when comparing different grains. Microstructures corresponding to the dark zone and rim region can be obtained by parameterizing the model with the appropriate defect production rate, as determined based on the burnup rate and temperature. Furthermore, bubble size and distribution do not significantly affect the rate of restructuring. The predicted microstructures are consistent with experimental observations of the restructured regions. Finally, we present a correlation demonstrating the evolution of the restructuring volume fraction as a function of local burnup.

UO2↗
DOE OSTI2023

Impact of oxidation and carbonation on the release rates of iodine, selenium, technetium, and nitrogen from a cementitious waste form

Evaluation of the long-term retention mechanisms and potential release rates for the primary constituents of potential concern (COPCs) (i.e., Tc, I, Se, and nitrate) is necessary to determine if Cast Stone, a radioactive waste form, can meet performance objectives under near-surface disposal scenarios. In this work, a mineral and parameter set accounting for the solubility of I and Se in Cast Stone was developed based on pH-dependent and monolithic diffusion leaching test results, to extend a geochemical speciation model previously developed. The impact of oxidation and carbonation as environmental aging processes on the retention properties of Cast Stone for primary COPCs was systematically estimated. Physically, the effective diffusion coefficients of 4 COPCs in Cast Stone were increased after carbonation and/or oxidation, reflecting an increase in permeability to diffusion. Chemically, i) pH & pe conditions in the original Cast Stone were favorable for the stabilization of Tc, but not for I, Se, and N; ii) oxidation (with/without carbonation) of Cast Stone changed the pe & pH conditions to be detrimental for Tc stabilization; and iii) carbonation (with/without oxidation) of Cast Stone modified the pH & pe conditions to be beneficial for the stabilization of I (in system with Ag added) and Se.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Visible-Light Photoinitiation of (Meth)acrylate Polymerization with Autonomous Post-Conversion

Conversion plateaus rapidly in radical photopolymerizations (RPPs) following discontinuation of irradiation due to rapid termination of reactive radicals, which restricts the wider use of RPPs in applications that involve nonuniform light access including those with attenuated light transmission or irregular surfaces. Based on our recent report of a radical dark-curing photoinitiator (DCPI) that continues polymerization beyond the cessation of irradiation by enabling latent redox initiation with photo-released amine in the presence of a suitable oxidant, we developed a new DCPI with an absorption spectrum that extends well into the visible range. Our design process involved a series of computational investigations of candidate molecules, including a systematic study of substituents and their position-dependent effects on absorption characteristics, electronic transitions, and the photochemical mechanism and its associated energetics. Our quantum chemical computations identified the target compound 5,7-dimethoxy-6-bromo-3-aroylcoumarin-DMPT/BPh4 and predicted that it would facilitate the dark-curing mechanism by concurrent photo-radical generation and photo-induced release of an efficient redox reductant under visible irradiation. This reductant-tethered chromophore was then synthesized and optically characterized with UV–vis spectroscopy that revealed its strong visible-light absorption with a molar absorptivity of 5710 M–1 cm–1 at 405 nm and 50 M–1 cm–1 at 455 nm. We then demonstrated extensive dark-curing of >35% additional conversion over 25 min following brief activation of the shelf-stable one-part system by irradiation with a 455 nm LED that was ceased at 20% conversion. In contrast, shuttering irradiation of the control formulation at that same point resulted in immediate cessation of conversion, which plateaued at 20%. We determined a remarkable initiator efficiency of 2.82 that results from the additional redox-generated radicals with a 77% photo-reductant generation quantum yield. The combination of superior photo- and dark-curing efficiencies of this new visible DCPI is expected to open new application opportunities in RPP, especially those involving resins that are highly light attenuating, surfaces that possess irregular features that produce uneven irradiance, and production lines where continued dark-curing downstream of the light activation step enhances line efficiencies.

absorption spectrum↗
DOE OSTI2024

Continuous Polymer Synthesis and Manufacturing of Polyurethane Elastomers Enabled by Automation

Connecting polymer synthesis and processing is an important challenge for streamlining the manufacturing of polymeric materials. In this work, the automated synthesis of acrylate-capped polyurethane oligomers is integrated with vat photopolymerization 3D printing. This strategy enabled the rapid manufacturing of a library of polyurethane-based elastomeric materials with differentiated thermal and mechanical properties. The automated semi-continuous batch synthesis approach proved enabling for resins with otherwise short shelf lives because the intimate connection between synthesis, formulation, and processing. Structure-property studies demonstrated the ability to tune properties through systematic alteration of crosslink density and chemical composition.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Statistically Steady State Large-Eddy Simulations Forced by an Idealized GCM: 1. Forcing Framework and Simulation Characteristics

Using large-eddy simulations (LES) systematically has the potential to inform parameterizations of subgrid-scale (SGS) processes in general circulation models (GCMs), such as turbulence, convection, and clouds. Here we show how LES can be run to emulate grid columns of GCMs to generate a library of LES across a cross-section of dynamical regimes. The LES setup replicates the thermodynamic and water budgets in GCM grid columns. Resolved horizontal and vertical transports of heat and water and large-scale pressure gradients from the GCM are prescribed as forcing in the LES. The LES satisfies the same (slab-ocean) surface boundary conditions as the GCM, leaving the LES temperatures free to adjust. Radiative transfer is treated in a unied but highly idealized manner (a semi-gray atmosphere without cloud radiative effects) in both the GCM and LES. We show that the LES with these forcing and boundary conditions reaches statistically steady states without nudging to reference profiles. These steady states provide a training dataset for developing GCM parameterizations. The same LES setup also provides a good basis for studying the cloud response to global warming.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Correlating concerted cations with oxygen redox in rechargeable batteries

Rechargeable batteries currently power much of our world, but with the increased demand for electric vehicles (EVs) capable of traveling hundreds of miles on a single charge, new paradigms are necessary for overcoming the limits of energy density, particularly in rechargeable batteries. The emergence of reversible anionic redox reactions presents a promising direction toward achieving this goal; however this process has both positive and negative effects on battery performance. While it often leads to higher capacity, anionic redox also causes several unfavorable effects such as voltage fade, voltage hysteresis, sluggish kinetics, and oxygen loss. However, the introduction of cations with topological chemistry tendencies has created an efficient pathway for achieving long-term oxygen redox with improved kinetics. The cations serve as pillars in the crystal structure and meanwhile can interact with oxygen in ways that affect the oxygen redox process through their impact on the electronic structure. This review delves into a detailed examination of the fundamental physical and chemical characteristics of oxygen redox and elucidates the crucial role that cations play in this process at the atomic and electronic scales. Furthermore, here we present a systematic summary of polycationic systems, with an emphasis on their electrochemical performance, in order to provide perspectives on the development of next-generation cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2024

Exploring direct photodetachment and photodissociation–photodetachment dynamics of platinum iodide anions (PtI n - , n = 2–5) using cryogenic photoelectron spectroscopy

The direct photodetachment and two-photon photodissociation–photodetachment processes of a series of PtI n - (n = 2–5) anions were systematically studied using cryogenic anion photoelectron spectroscopy and first-principles electronic structure calculations. The adiabatic/vertical detachment energies (ADEs/VDEs) of these anions were determined from their 193 nm photoelectron (PE) spectra, i.e., 3.54/3.63, 4.04/4.09, 4.33/4.36, and 4.37/4.41 eV for n = 2–5, respectively, and well reproduced by B3LYP-D3(BJ)/aug-cc-pVTZ-pp calculations. As the coordination number increases, the electron affinity (EA) of PtI n • (n = 2–5) neutrals (equivalent to the corresponding anion’s ADE) gradually increases, exceeding the EA of Cl at n = 3 and exhibiting superhalogen characteristics for n ≥ 3. Meanwhile, the ground state transition contributed from detaching electrons in the highest occupied molecular orbital gradually evolves from the central metal Pt to the iodine ligands. For the PtI 3 - anion, besides one-photon direct detachment, four distinct two-photon photodissociation–photodetachment channels were identified, and the competition between them was discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗