Search NASA⌕ Search

SEARCH · Search NASA

Results for “THERMODYNAMIC PROPERTY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Structural and thermodynamic properties of Fe{sub 1.12}Te with multiple phase transitions

The parent compound of iron chalcogenide superconductors, Fe{sub 1+y}Te, with a range of excess Fe concentrations exhibits intriguing structural and magnetic properties. Here, the interplay of magnetic and structural properties of Fe{sub 1.12}Te single crystals have been probed by low-temperature synchrotron X-ray powder diffraction, magnetization, and specific heat measurements. Thermodynamic measurements reveal two distinct phase transitions, considered unique to samples possessing excess Fe content in the range of 0.11≤y≤0.13. On cooling, an antiferromagnetic transition, T{sub N}≈57 K is observed. A closer examination of powder diffraction data suggests that the transition at T{sub N} is not purely magnetic, but accompanied by the commencement of a structural phase transition from tetragonal to orthorhombic symmetry. This is followed by a second prominent first-order structural transition at T{sub S} with T{sub S}<T{sub N}, where an onset of monoclinic distortion is observed. The results point to a strong magneto-structural coupling in this material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The thermodynamic properties of the wustite phase are studied

Study of the precise location of the wustite phase boundaries and the dependence of the partial pressure of oxygen on the temperature and composition of the solid phase was made. From the pressure of oxygen, the temperature and the composition thermodynamic quantities can be determined.

Ackerman, R. J.↗

Kerogen Swelling and Confinement: Its implication on Fluid Thermodynamic Properties in Shales

Type I kerogen was isolated from Green River Shale and characterized using SEM, TGA, DSC, and nitrogen adsorption. The swelling behavior of this kerogen with decane was analyzed using traditional test-tube swelling experiment and Dynamic Light Scattering. The TGA and DSC were used to analyze the thermodynamic behavior of decane that was sorbed in the kerogen and show that kerogen suppresses the boiling point of decane due to the effect of confinement. However, the suppression is larger when oil (a multicomponent mixture) was used, possibly due to the combined effect of differential uptake of components by kerogen (kerogen prefers and sorbs polars and aromatics more than saturates, leading to splitting of oil into a sorbed and a free phase) and confinement in nano pores. Test-tube swelling, TGA, and DSC experiments were also performed on pyridine(polar-aromatic)-swelled kerogen. The combined and individual contributions from the two effects (the effect of confinement and differential uptake of hydrocarbon components) on properties of liquid in contact with kerogen, are studied in this work. Molecular Dynamics (MD) simulations revealed the variation in the swelling of type II kerogen in the presence of same amount of different liquids (differential swelling of kerogen).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aldehydes in hydrothermal solution - Standard partial molal thermodynamic properties and relative stabilities at high temperatures and pressures

Aldehydes are common in a variety of geologic environments and are derived from a number of sources, both natural and anthropogenic. Experimental data for aqueous aldehydes were taken from the literature and used, along with parameters for the revised Helgeson-Kirkham-Flowers (HKF) equations of state, to estimate standard partial molal thermodynamic data for aqueous straight-chain alkyl aldehydes at high temperatures and pressures. Examples of calculations involving aldehydes in geological environments are given, and the stability of aldehydes relative to carboxylic acids is evaluated. These calculations indicate that aldehydes may be intermediates in the formation of carboxylic acids from hydrocarbons in sedimentary basin brines and hydrothermal systems like they are in the atmosphere. The data and parameters summarized here allow evaluation of the role of aldehydes in the formation of prebiotic precursors, such as amino acids and hydroxy acids on the early Earth and in carbonaceous chondrite parent bodies.

Schulte, Mitchell D.↗

Thermodynamic properties of ZrCl 4 with LiCl, NaCl, KCl, CsCl, MgCl 2 , and UCl 3 for molten salt reactor applications

Here, a set of self-consistent Gibbs energy functions has been developed to describe the thermochemical behavior of the major reactive fission product ZrCl 4 with key components in chloride molten salt reactors (MSRs): LiCl–ZrCl 4 , NaCl–ZrCl 4 , KCl–ZrCl 4 , CsCl–ZrCl 4 , MgCl 2 –ZrCl 4 and UCl 3 –ZrCl 4 . Low ZrCl 4 concentration phase equilibria most relevant to MSR applications have been confirmed via differential scanning calorimetry for NaCl–ZrCl 4 , and X-ray diffraction analysis performed on equilibrated samples of NaCl–ZrCl 4 , KCl–ZrCl 4 , MgCl 2 –ZrCl 4 , and UCl 3 –ZrCl 4 . Within the framework of the modified quasi-chemical model in the quadruplet approximation, extrapolations of pseudo-binary models were generated to represent KCl–MgCl 2 –ZrCl 4 , KCl–NaCl–ZrCl 4 , and MgCl 2 –NaCl–ZrCl 4 , which show agreement with phase equilibria data where available without the use of ternary interaction parameters. The optimized thermodynamic descriptions for these systems and others are available in the open-source compendium Molten Salt Thermal Properties Database – Thermochemical (MSTDB–TC).

CALPHAD↗

Effect of Oxygen on the Quantum, Magnetic, and Thermodynamic Properties of Co Nanowires on the Reconstructed Anisotropic (1 × 2)/Au(110) and (1 × 2)/Pt(110) Surfaces: Ab Initio Approach

Ab initio theoretical study of the quantum magnetic properties of Co nanowires on the pure and oxygen-reconstructed (1 × 2)/Au(110) and (1 × 2)/Pt(110) surfaces is performed. Their structures and electronic configurations are calculated using the electron density functional theory. High values of magnetic moment and magnetic anisotropy energies of Co atoms are found on both pure and oxygen-reconstructed (1 × 2)/Au(110) and (1 × 2)/Pt(110) surfaces. The adsorption of oxygen atoms on the (1 × 2)/Au(110) substrate is shown to affect the structural arrangement of Co nanowire atoms on this substrate and to increase the magnetic anisotropy energy (by 1.91 meV per nanowire atom). The adsorption of oxygen on the Pt(110) substrate substantially decreases the magnetic anisotropy energy of the Co nanowire on it (by 5.98 meV per atom). The origin of these changes is revealed by analyzing the local densities of states of the d electrons of nanowire atoms. The temperature ranges of the states with the lowest free surface energy are determined using the atomistic thermodynamics methods. These data and the available experimental data are used to predict the possibility of observing the structures under study in experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermodynamic Properties and Phase Transitions of Microcrystalline and Nanostructured SmFeO{sub 3} Ceramics

The heat capacity and dielectric properties of microcrystalline and nanostructured SmFeO{sub 3} ceramics obtained by solid phase synthesis are studied. The ceramics is synthesized by the treatment of the batch at room temperature in Bridgman anvils by forceful action combined with shear deformation followed by sintering. It is established that the mechanoactivation results in noticeable broadening antiferromagnetic–ferroelectric transition and shifting the temperature of phase transition in the low-temperature area. The phase transition having typical for relaxation oscillator frequency dependent character is found at 558 K. It is shown that the defect structure can take a dominant place in the formation of the physical properties of ceramics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Design of Efficient Molecular Electrocatalysts for Water and Carbon Dioxide Reduction Using Predictive Models of Thermodynamic Properties

Objectives: 1) To design and synthesize water soluble transition metal complexes that function as electrocatalysts for the reduction of water to hydrogen or carbon dioxide to formate 2) To experimentally measure thermochemical properties, such as hydride donor ability, and use these quantities to optimize catalyst performance in solutions of varying pH 3) To incorporate results from detailed mechanistic and kinetic studies to direct improvements in catalyst design 4) To use thermochemical data from objective 2 to generate predictive models for the properties of new complexes to apply to the development of catalysts for other reductive reactions, with an emphasis on carbon dioxide reduction to methanol Description: Wide-spread implementation of renewable but intermittent energy sources, such as solar, requires the development of efficient methods for energy storage. The high energy density of chemical bonds makes chemical fuels an ideal solution for energy storage. Hydrogen and reduced carbon compounds have been proposed as ideal candidates for chemical fuels. However, the generation of chemical fuels from electricity requires competent electrocatalysts. The proposed research focuses on developing electrocatalysts for the reduction of water to hydrogen, and carbon dioxide to formate. Both products can be used directly as an energy carrier in fuel cells, or as a reductant for more saturated chemical fuels. Hydrogen is the most common fuel used in current commercial fuel cells. Additionally, there is interest in formic acid as a liquid carrier for hydrogen because of its increased storage density and ease of dehydrogenation. Formate is also an intermediate in the sequential reduction of CO 2 to methanol, another potential chemical fuel with high energy storage density. Despite the utility of formate as a chemical fuel or precursor, there are very few examples of electrocatalysts for its production from CO 2 , and even fewer demonstrate high product selectivity. In heterogeneous catalysis, the Sabatier principle is used to generate volcano curves that describe optimal thermochemical properties for key intermediates that result in peak catalytic activity. In most cases, such as hydrogen production and oxidation, the most favorable metals (Pt, Re, Rh, and Ir) are rare and expensive. Molecular inorganic complexes provide an opportunity to use electronic and steric ligand effects to tune the critical thermodynamic parameters of abundant metals to values comparable to key surface intermediates on precious metals. This principle will be applied to the design of aqueous homogeneous catalysts for the reduction of H 2 O and CO 2 optimized to function at specific pH ranges. The critical intermediate in both of these reactions is a metal hydride. The strength of this bond, or hydricity (ΔGH - ) dictates the overall thermodynamics of the reduction of H + to H 2 and the sequential reduction of C1 substrates, such as CO 2 , CO, and H 2 CO (the latter to CH 3 OH). ΔGH - will be systematically measured for a series of first row metal complexes to form predictive models for metal and ligand electronic effects. Benefits and Outcomes: This approach addresses thermodynamic requirements essential for energy-efficient catalyst design and transition state barrier considerations for faster catalysis. The advancements made from this research will include the discovery of efficient, stable, and fast catalysts for hydrogen and formate generation from electricity. The ability to store energy efficiently is critical to the widespread use of renewable energy schemes. This provides a viable solution to produce high energy density fuels for stationary and mobile energy applications. The fundamental research conducted is also directly applicable to the design of catalysts for the generation of further reduced products such as methanol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metastable Solution Thermodynamic Properties and Crystal Growth Kinetics

The crystal growth rates of NH4H2PO4, KH2PO4, (NH4)2SO4, KAl(SO4)2 central dot 12H2O, NaCl, and glycine and the nucleation rates of KBr, KCl, NaBr central dot 2H2O, (NH4)2Cl, and (NH4)2SO4 were expressed in terms of the fundamental driving force of crystallization calculated from the activity of supersaturated solutions. The kinetic parameters were compared with those from the commonly used kinetic expression based on the concentration difference. From the viewpoint of thermodynamics, rate expressions based on the chemical potential difference provide accurate kinetic representation over a broad range of supersaturation. The rates estimated using the expression based on the concentration difference coincide with the true rates of crystallization only in the concentration range of low supersaturation and deviate from the true kinetics as the supersaturation increases.

Kim, Soojin↗

The effect of H2O gas on volatilities of planet-forming major elements. I - Experimental determination of thermodynamic properties of Ca-, Al-, and Si-hydroxide gas molecules and its application to the solar nebula

The vapor pressures of Ca(OH)2(g), Al(OH)3(g), and Si(OH)4(g) molecules in equilibrium with solid calcium-, aluminum, and silicon-oxides, respectively, were determined, and were used to derive the heats of formation and entropies of these species, which are expected to be abundant under the currently postulated physical conditions in the primordial solar nebula. These data, in conjunction with thermodynamic data from literature, were used to calculate the relative abundances of M, MO(x), and M(OH)n gas species and relative volatilities of Fe, Mg, Si, Ca, and Al for ranges of temperature, total pressure, and H/O abundance ratio corresponding to the plausible ranges of physical conditions in the solar nebula. The results are used to explain how Ca and Al could have evaporated from Ca,Al-rich inclusions in carbonaceous chondrites, while Si, Mg, and Fe condensed onto them during the preaccretion alteration of CAIs.

Hashimoto, Akihiko↗

High-Temperature Heat Capacity and Thermodynamic Properties of HoBiGeO{sub 5} and ErBiGeO{sub 5}

Polycrystalline HoBiGeO{sub 5} and ErBiGeO{sub 5} samples have been prepared by solid-state reactions, by firing stoichiometric mixtures of Ho{sub 2}O{sub 3} (Er{sub 2}O{sub 3}), Bi{sub 2}O{sub 3}, and GeO{sub 2}. The effect of temperature on the heat capacity of the synthesized compounds has been investigated by differential scanning calorimetry in the range 350–1000 K. The experimental C{sub p}(T) data have been used to evaluate the thermodynamic functions of bismuth holmium and bismuth erbium germanates: enthalpy increment, entropy change, and reduced Gibbs energy.

36 MATERIALS SCIENCE↗

Thermodynamic properties of some metal oxide-zirconia systems

Metal oxide-zirconia systems are a potential class of materials for use as structural materials at temperatures above 1900 K. These materials must have no destructive phase changes and low vapor pressures. Both alkaline earth oxide (MgO, CaO, SrO, and BaO)-zirconia and some rare earth oxide (Y2O3, Sc2O3, La2O3, CeO2, Sm2O3, Gd2O3, Yb2O3, Dy2O3, Ho2O3, and Er2O3)-zirconia system are examined. For each system, the phase diagram is discussed and the vapor pressure for each vapor species is calculated via a free energy minimization procedure. The available thermodynamic literature on each system is also surveyed. Some of the systems look promising for high temperature structural materials.

Jacobson, Nathan S.↗

Thermodynamic Properties of Uranium-Zirconium Carbide Solid Solutions with Oxygen

Uranium-zirconium carbide solid solutions are potential candidates for fuel in space nuclear reactors. To support development of advanced robust fuels for space applications, (U y Zr 1-y )C x O z solid solutions were synthesized via carbothermic reduction with uranium, carbon, and oxygen contents raging from y=0.05 – 0.3, x=0.95 – 0.98, and z = 0.02 – 0.07. These solid solutions were subsequently characterized by X-ray diffraction and elemental combustion analysis. High-temperature oxidative drop solution calorimetry in molten sodium molybdate solvent at 1073 K was employed to determine the formation, oxidation, and mixing enthalpies of (U y Zr 1-y )C x O z solid solutions, and thereby for evaluating their thermodynamic stability. The solid solutions are enthalpically less stable than the UC and ZrC end members. They also become less stable and more reactive towards oxidation with increasing uranium content. Incorporation of oxygen into solid solutions increases their solid solution-stability and improves their oxidation resistance.

Calorimetry↗