Search NASA⌕ Search

SEARCH · Search NASA

Results for “Thermoelectric properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Anomalous Hall effect in the weak-itinerant ferrimagnet FeCr 2 Te 4

In this study, we carried out a comprehensive study of electronic transport, thermal, and thermodynamic properties in Fe Cr 2 Te 4 single crystals. It exhibits bad-metallic behavior and anomalous Hall effect (AHE) below a weak-itinerant paramagnetic-to-ferrimagnetic transition T c ~ 123 K. The linear scaling between the anomalous Hall resistivity ρ x y and the longitudinal resistivity ρ x x implies that the AHE in Fe Cr 2 Te 4 is most likely dominated by an extrinsic skew-scattering mechanism rather than an intrinsic KL or an extrinsic side-jump mechanism, which is supported by our Berry phase calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Experimental observation of localized interfacial phonon modes

Interfaces impede heat flow in micro/nanostructured systems. Conventional theories for interfacial thermal transport were derived based on bulk phonon properties of the materials making up the interface without explicitly considering the atomistic interfacial details, which are found critical to correctly describing thermal boundary conductance. Recent theoretical studies predicted the existence of localized phonon modes at the interface which can play an important role in understanding interfacial thermal transport. However, experimental validation is still lacking. Through a combination of Raman spectroscopy and high-energy-resolution electron energy-loss spectroscopy in a scanning transmission electron microscope, we report the experimental observation of localized interfacial phonon modes at ~12 THz at a high-quality epitaxial Si-Ge interface. These modes are further confirmed using molecular dynamics simulations with a high-fidelity neural network interatomic potential, which also yield thermal boundary conductance agreeing well with that measured in time-domain thermoreflectance experiments. Simulations find that the interfacial phonon modes have an obvious contribution to the total thermal boundary conductance. Our findings significantly contribute to the understanding of interfacial thermal transport physics and have impact on engineering thermal boundary conductance at interfaces in applications such as electronics thermal management and thermoelectric energy conversion.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Influence of isoelectronic mass modulation on phonon decay and transport in layered pnictogen-carbon systems

This study systematically investigates the structural, electronic, and thermal transport properties of layered pnictogen–carbon (Pn 2 C 2 ; Pn = P, As, Sb, Bi) monolayers, revealing a profound influence of isoelectronic mass modulation on phonon dynamics and thermal conductivity. Through first-principles calculations and lattice dynamics analysis, we demonstrate that increasing the atomic mass of pnictogens leads to elongated Pn-C bonds, weakened interatomic interactions, and enhanced phonon-phonon scattering, resulting in a dramatic reduction in lattice thermal conductivity (κ). Specifically, κ decreases exponentially from 65.6 W/m-K in P 2 C 2 to an ultralow 0.37 W/m-K in Bi 2 C 2 , driven by suppressed acoustic-optical phonon gaps Δ$^{Γ}_{A-0}$, increased anharmonicity, and reduced phonon lifetimes and group velocities. The transition from semiconducting to metallic behavior in heavier pnictogen-based systems further enhances phonon-electron scattering, contributing to thermal conductivity suppression. Structural analysis highlights the strengthening of out-of-plane C—C bonds and the contraction of C—Pn—C bond angles, which disrupt in-plane phonon transport. Further, these findings establish a design framework for engineering ultralow-κ materials through chemical substitution and structural tuning, offering significant potential for thermoelectric and thermal management applications. This work provides fundamental insights into phonon decay mechanisms and thermal transport in 2D materials, paving the way for advanced phononic and energy-efficient devices.

2D materials↗
DOE OSTI2024

Thermal transport in Yb-based 1-2-20 materials

Abstract Lattice thermal-transport properties of heavy-fermion YbT 2 Zn 20 -based (T = Co, Rh, and Ir) 1-2-20 compounds are calculated with the single-mode relaxation-time approximation and the full solution of the linearized phonon Boltzmann transport equation from first-principles anharmonic phonon calculations. We predict low lattice thermal conductivity κ L with a maximum value of ∼ 24.16 · K at 85.14 K, 137.29 · K at 9.67 K, and 23.55 · K at 67.50 K and ∼ 12.02, 40.04, and 10.30 · K at room temperature for YbCo 2 Zn 20 , YbRh 2 Zn 20 , and YbIr 2 Zn 20 , respectively. Based on the analysis of the cumulative κ L as a function of the phonon mean free path and the frequency-dependent joint density of states at various temperatures, we attribute the low κ L to a rattling mode with an average characteristic rattling frequency that enhanced phonon scattering processes, which reduced the phonon mean free paths, suppressed the phonon lifetime, and enhanced the probability of three-phonon scattering events. The predicted low κ L , especially in YbCo 2 Zn 20 and YbIr 2 Zn 20 , makes them promising candidate materials for thermoelectric applications and thermal management.

Physics↗
DOE OSTI2024

Engineering phonon transport through cation disorder in dimensionally constricted high entropy MXene

Designing materials with low thermal conductivity is a crucial objective for applications in thermal insulation and thermoelectrics. Traditional methods such as doping, mechanical strain and introducing defects in perfect crystals have been widely explored to impede the flow of heat. Here, this work introduces dimensional constriction and cationic disorder as novel avenues to manipulate lattice thermal conductivity (LTC). High entropy materials characterized by random distribution of multiple elements, creates a suitable environment for thermal insulation due to its configurational disorder and local lattice distortions. On the other hand, MXenes, derived from MAX-phase, have garnered considerable attention due to their unique structural attributes, leading to potential applications in catalysis and energy storage. Ti 2 AlC MAX-phase is examined to understand the impact of dimensional constriction on phonon transport of Ti 2 C with cationic disorder, i.e., (Ti 0.25 Nb 0.25 Cr 0.25 Ta 0.25 ) 2 C. The exponential reduction in LTC of HE-MXene is attributed to disorder scattering that significantly limits phonon mean free path (MFP) and relaxation time. The spread of mode-resolved LTC with MFP highlights the influence of disorder on phonon scattering. This work provides a systematic approach to engineer LTC through dimensional constriction and cationic disorder, laying the foundation for tailored materials with desired thermal properties.

2D materials↗
DOE OSTI2023

Entropy and Seebeck signals meet on the edges

Here, we explore the electronic entropy per particle s and Seebeck coefficient S in zigzag graphene ribbons. Pristine and edge-doped ribbons are considered using tight-binding models to inspect the role of edge states in the observed thermal transport properties. As a band gap opens when the ribbons are doped at one or both edges, due to asymmetric edge potentials, we find that s and S signals are closely related to each other: both develop sharp dip-peak line shapes as the chemical potential lies in the gap, while the ratio s/S exhibits a near-constant value equal to the elementary charge e at low temperatures. This constant ratio suggests that S can be seen as the transport differential entropy per charge, as suggested by some authors. Our calculations also indicate that measurement of s and S may be useful as a spectroscopic probe of different electronic energy scales involved in such quantities in gapped materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Nernst–Ettingshausen effect in thin Pt and W films at low temperatures

As spin caloritronic measurements become increasingly common techniques for characterizing material properties, it is important to quantify potentially confounding effects. We report measurements of the Nernst–Ettingshausen response from room temperature to 5 K in thin film wires of Pt and W, metals commonly used as inverse spin Hall detectors in spin Seebeck characterization. Johnson–Nyquist noise thermometry is used to assess the temperature change in the metals with heater power at low temperatures, and the thermal path is analyzed via finite-element modeling. The Nernst–Ettingshausen response of W is found to be approximately temperature-independent, while the response of Pt increases at low temperatures. Furthermore, these results are discussed in the context of theoretical expectations and the possible role of magnetic impurities in Pt.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Thermal transport properties of IrSbSe

Here we report a thermal transport study of IrSbSe, which crystallizes in a noncentrosymmetric cubic structure with the P2 1 3 space group and shows a narrow-gap semiconducting behavior. The large discrepancy between the activation energy for conductivity [E ρ = 128(2) meV] and for thermopower [E S = 17.7 (9) meV] from 200 to 300 K indicates a polaronic transport mechanism. The electrical resistivity varies as exp (T 0 /T) 1/4 and thermopower varies as T 1/2 at low temperatures, indicating that it evolves into Mott variable-range hopping dominant conduction with decreasing temperature. IrSbSe shows a relatively low value of thermal conductivity (~1.65 W/Km) and thermopower of about 0.24 mV/K around 100 K, yet poor electrical conductivity. On the other hand, a high vacancy defect concentration on both Ir and Sb atomic sites of up to 15% suggests a high defect tolerance and points to the possibility of a future improvement of carrier density by chemical substitution or defect optimization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Vibrational properties and thermal transport in quaternary chalcogenides: The case of Te-based compositions

Vibrational thermal properties of CuZn 2 InTe 4 , AgZn 2 InTe 4 , and Cu 2 CdSnTe 4 , derived from binary II-VI zinc-blendes, are reported based on first-principles calculations. While the chalcogenide atoms in these materials have the same lattice positions, the cation atom arrangements vary, resulting in different crystal symmetries and subsequent properties. The compositional differences have important effects on the vibrational thermal characteristics of the studied materials, which demonstrate that low-frequency optical phonons hybridize with acoustic phonons and lead to enhanced phonon-phonon scattering and low lattice thermal conductivities. The phonon density of states, mode Grüneisen parameters, and phonon scattering rates are also calculated, enabling deeper insight into the microscopic thermal conduction processes in these materials. Compositional variations drive differences among the three materials considered here; nonetheless, their structural similarities and generally low thermal conductivities (0.5–4 W/m K at room temperature) suggest that other similar II-VI zinc-blende derived materials will also exhibit similarly low values, as also corroborated by experimental data. Finally, this, combined with the versatility in designing a variety of motifs on the overall structure, makes quaternary chalcogenides interesting for thermal management and energy conversion applications that require low thermal conductivity.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Vacancy defect control of colossal thermopower in FeSb2

Abstract Iron diantimonide is a material with the highest known thermoelectric power. By combining scanning transmission electron microscopic study with electronic transport neutron, X-ray scattering, and first principle calculation, we identify atomic defects that control colossal thermopower magnitude and nanoprecipitate clusters with Sb vacancy ordering, which induce additional phonon scattering and substantially reduce thermal conductivity. Defects are found to cause rather weak but important monoclinic distortion of the unit cell P n n m → P m . The absence of Sb along [010] for high defect concentration forms conducting path due to Fe d orbital overlap. The connection between atomic defect anisotropy and colossal thermopower in FeSb 2 paves the way for the understanding and tailoring of giant thermopower in related materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Structural Tolerance Factor Approach to Defect-Resistant I 2 -II-IV-X 4 Semiconductor Design

Recent work on quaternary semiconductors Cu 2 BaSn(S,Se) 4 and Ag 2 BaSnSe 4 for photovoltaic and thermoelectric applications, respectively, has shown the promise of exploring the broader family of defect-resistant I 2 -II-IV-X 4 materials (where I, II, and IV refer to the formal oxidation state of the metal cations and X is a chalcogen anion) with tetrahedrally coordinated I/IV cations and larger II cations (i.e., Sr, Ba, Pb, and Eu) for optoelectronic and energy-related applications. Chemical dissimilarity among the II and I/IV atoms represents an important design motivation because it presents a barrier to antisite formation, which otherwise may act as electronically harmful defects. We herein show how all 31 experimentally reported I 2 -II-IV-X 4 examples (with large II cations and tetrahedrally coordinated smaller I/IV cations), which form within five crystal structure types, are structurally linked. Based on these structural similarities, we derive a set of tolerance factors that serve as descriptors for phase stability within this family. Despite common usage in the well-studied perovskite system, Shannon ionic radii are found to be insufficient for predicting metal–chalcogen bond lengths, pointing to the need for experimentally derived correction factors as part of an empirically driven learning approach to structure prediction. Here, we use the tolerance factors as a predictive tool and demonstrate that four new I 2 -II-IV-X 4 compounds, Ag 2 BaSiS 4 , Ag 2 PbSiS 4 , Cu 2 PbGeS 4 , and Cu 2 SrSiS 4 , can be synthesized in correctly predicted phases. One of these compounds, Ag 2 PbSiS 4 , shows potentially promising optoelectronic properties for photovoltaic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

X-ray induced grain boundary formation and grain rotation in Bi 2 Se 3

Optimizing grain boundary characteristics in polycrystalline materials can improve their properties. Many processing methods have been developed for grain boundary manipulation, including the use of intense radiation in certain applications. Here, in this work, we used X-ray free electron laser pulses to irradiate single-crystalline bismuth selenide (Bi 2 Se 3 ) and observed grain boundary formation and subsequent grain rotation in response to the X-ray radiation. Our observations with simultaneous transmission X-ray microscopy and X-ray diffraction demonstrate how intense X-ray radiation can rapidly change size and texture of grains.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Magnetization around mix jets entering inertial confinement fusion fuel

Engineering features are known to cause jets of ablator materials to enter the fuel hot-spot in inertial confinement fusion implosions. The Biermann battery mechanism wraps them in a self-generated magnetic field. Here we show that higher-Z jets have an additional thermoelectric magnetic source term that is not present for hydrogen jets, verified here through a kinetic simulation. It has similar magnitude to the Biermann term. We then include this in an extended magneto-hydrodynamic approach to post process an xRAGE radiation-hydrodynamic implosion simulation. The simulation includes an accurate model for the capsule fill tube, producing a dense carbon jet that becomes wrapped in a 4000 T magnetic field. A simple spherical carbon mix model shows that this insulates the electron heat conduction enough to cause contraction of the jet to an optically thick equilibrium. The denser magnetized jet hydrodynamics could change its core penetration and therefore the final mix mass, which is known to be well correlated with fusion yield degradation. Fully exploring this will require self-consistent magneto-hydrodynamic simulations. Experimental signatures of this self-magnetization may emerge in the high energy neutron spectrum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Nanoscale Engineering of Polymorphism in Cu 2 Se-Based Composites

Crystal polymorphism selection during synthesis is extremely challenging. However, promoting the formation of a specific metastable polymorph enables modulation of the functional properties of phase-change materials through alteration of the relative abundance of various polymorphs. Here, we demonstrate the stabilization of the superionic β-Cu 2 Se phase under ambient conditions and the direct control over the relative ratio between the α-Cu 2 Se and β-Cu 2 Se polymorphs in (x)CuGaSe 2 /(1-x)Cu 2 Se composites using CuGaSe 2 nanoseeds. Here, we found that the small lattice mismatch between β-Cu 2 Se (cubic) and the ab plane of tetragonal CuGaSe 2 nanoseeds promotes the formation of low-energy coherent CuGaSe 2 /β-Cu 2 Se interfaces leading to preferential stabilization of β-Cu 2 Se. Astonishingly, the hierarchical microstructure of the resulting composites enables a remarkable decoupling of charge and heat transport, which is manifested by a breakdown of the Wiedemann-Franz law

36 MATERIALS SCIENCE↗
DOE OSTI2023

Primitive to conventional geometry projection for efficient phonon transport calculations

Abstract The primitive Wigner-Seitz cell and corresponding first Brillouin zone (FBZ) are typically used in calculations of lattice vibrational and transport properties as they contain the smallest number of degrees of freedom and thus have the cheapest computational cost. However, in complex materials, the FBZ can take on irregular shapes where lattice symmetries are not apparent. Thus, conventional cells (with more atoms and regular shapes) are often used to describe materials, though dynamical and transport calculations are more expensive. Here we discuss an efficient anharmonic lattice dynamic method that maps conventional cell dynamics to primitive cell dynamics based on translational symmetries. Such symmetries have not been utilized in typical lattice dynamical calculations. This leads to phase interference conditions that act like conserved quantum numbers and a conservation rule for phonon scattering that is hidden in conventional dynamics which significantly reduces the computational cost. We demonstrate this method for phonon transport in a variety of materials with inputs from first-principles calculations and attribute its efficiency to reduced scattering phase space and fewer summations in scattering matrix element calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Enhanced superconductivity and electron correlations in intercalated ZrTe 3

We report charge density waves (CDWs) with superconductivity, competing Fermi surface instabilities, and collective orders have captured much interest in two-dimensional van der Waals (vdW) materials. Understanding the CDW suppression mechanism, its connection to the emerging superconducting state, and electronic correlations provides opportunities for engineering the electronic properties of vdW heterostructures and thin-film devices. Using a combination of the thermal transport, x-ray photoemission spectroscopy, Raman measurements, and first-principles calculations, we observe an increase in electronic correlations of the conducting states as the CDW is suppressed in ZrT e3 with 5% Cu and Ni intercalation in the vdW gap. As superconductivity emerges, intercalation brings not only decoupling of quasi-one-dimensional conduction electrons with phonons as a consequence of intercalation-induced lattice expansion but also a drastic increase in Zr 2+ at the expense of Zr 4+ metal atoms. These observations not only demonstrate the potential of atomic intercalates in the vdW gap for ground-state tuning but also illustrate the crucial role of the Zr metal valence in the formation of collective electronic orders.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Spinor $GW$ Bethe-Salpeter calculations in BerkeleyGW: Implementation, symmetries, benchmarking, and performance

Computing the GW quasiparticle band structure and Bethe-Salpeter equation (BSE) absorption spectra for materials with spin-orbit coupling have commonly been done by treating GW corrections and spin-orbit coupling (SOC) as separate perturbations to density-functional theory. However, accurate treatment of materials with strong spin-orbit coupling (such as many topological materials of recent interest, and thermoelectrics) often requires a nonperturbative approach using spinor wave functions in the Kohn-Sham equation and GW/BSE. Such calculations have only recently become available, in particular for the BSE. Here, we have implemented this approach in the plane-wave pseudopotential GW/BSE code BerkeleyGW, which is highly parallelized and widely used in the electronic-structure community. We present reference results for quasiparticle band structures and optical absorption spectra of solids with different strengths of spin-orbit coupling, including Si, Ge, GaAs, GaSb, CdSe, Au, and Bi 2 Se 3 . The calculated quasiparticle band gaps of these systems are found to agree with experiment to within a few tens of meV. SOC splittings are found to be generally in better agreement with experiment, including quasiparticle corrections to band energies. The absorption spectrum of GaAs is not significantly impacted by the inclusion of spin-orbit coupling due to its relatively small value (0.2 eV) in the Λ direction, while the absorption spectrum of GaSb calculated with the spinor GW/BSE captures the large spin-orbit splitting of peaks in the spectrum. For the prototypical topological insulator Bi 2 Se 3 , we find a drastic change in the low-energy band structure compared to that of DFT, with the spinorial treatment of the GW approximation correctly capturing the parabolic nature of the valence and conduction bands after including off-diagonal self-energy matrix elements. We present the detailed methodology, approach to spatial symmetries for spinors, comparison against other codes, and performance compared to spinless GW/BSE calculations and perturbative approaches to SOC. This work aims to spur further development of spinor GW/BSE methodology in excited-state research software and enables a more accurate and detailed exploration of electronic and optical properties of materials containing elements with large atomic numbers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Suppressed Lone Pair Electrons Explain Unconventional Rise of Lattice Thermal Conductivity in Defective Crystalline Solids

Manipulating thermal properties of materials can be interpreted as the control of how vibrations of atoms (known as phonons) scatter in a crystal lattice. Compared to a perfect crystal, crystalline solids with defects are expected to have shorter phonon mean free paths caused by point defect scattering, leading to lower lattice thermal conductivities than those without defects. While this is true in many cases, alloying can increase the phonon mean free path in the Cd-doped AgSnSbSe 3 system to increase the lattice thermal conductivity from 0.65 to 1.05 W m –1 K –1 by replacing 18% of the Sb sites with Cd. It is found that the presence of lone pair electrons leads to the off-centering of cations from the centrosymmetric position of a cubic lattice. X-ray pair distribution function analysis reveals that this structural distortion is relieved when the electronic configuration of the dopant element cannot produce lone pair electrons. Furthermore, a decrease in the Grüneisen parameter with doping is experimentally confirmed, establishing a relationship between the stereochemical activity of lone pair electrons and the lattice anharmonicity. The observed “harmonic” behavior with doping suggests that lone pair electrons must be preserved to effectively suppress phonon transport in these systems.

36 MATERIALS SCIENCE↗