Search NASA⌕ Search

SEARCH · Search NASA

Results for “Two Dimensional Electron Systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Self-assembly of ordered wurtzite/rock salt heterostructures—A new view on phase separation in Mg{sub x}Zn{sub 1−x}O

The self-assembled formation of ordered, vertically stacked rocksalt/wurtzite Mg{sub x}Zn{sub 1−x}O heterostructures by planar phase separation is shown. These heterostructures form quasi “natural” two-dimensional hetero-interfaces between the different phases upon annealing of MgO-oversaturated wurtzite Mg{sub x}Zn{sub 1−x}O layers grown by plasma-assisted molecular beam epitaxy on c-plane sapphire substrates. The optical absorption spectra show a red shift simultaneous with the appearance of a cubic phase upon annealing at temperatures between 900 °C and 1000 °C. Transmission electron microscopy reveals that these effects are caused by phase separation leading to the formation of a vertically ordered rock salt/wurtzite heterostructures. To explain these observations, we suggest a phase separation epitaxy model that considers this process being initiated by the formation of a cubic (Mg,Zn)Al{sub 2}O{sub 4} spinel layer at the interface to the sapphire substrate, acting as a planar seed for the epitaxial precipitation of rock salt Mg{sub x}Zn{sub 1−x}O. The equilibrium fraction x of magnesium in the resulting wurtzite (rock salt) layers is approximately 0.15 (0.85), independent of the MgO content of the as-grown layer and determined by the annealing temperature. This model is confirmed by photoluminescence analysis of the resulting layer systems after different annealing temperatures. In addition, we show that the thermal annealing process results in a significant reduction in the density of edge- and screw-type dislocations, providing the possibility to fabricate high quality templates for quasi-homoepitaxial growth.

36 MATERIALS SCIENCE↗

Relations between environmental noise and electronic coupling for optimal exciton transfer in one- and two-dimensional homogeneous and inhomogeneous quantum systems

Recent studies have indicated that environmental noise may increase energy-transfer efficiency in quantum systems. For homogeneous networks of chromophores previous studies have primarily considered excitonic transport in one-dimensional (linear) networks. In our study, we expand previous research to a two-dimensional fully coupled topology of chromophore molecules. We demonstrate that not only does an optimal dephasing rate exist in both one- and two-dimensional networks but also that it increases in magnitude with increasing coupling strength between chromophores. Optimal transport occurs when the noise quenches the entanglement between local modes that prevent the exciton from moving efficiently to the target site. We find that these results are insensitive to minor site defects such as those found in realistic systems. We contrast these findings to systems with a high degree of inhomogeneity, in which the optimal dephasing rate is largely set by the system topology and does not vary significantly with respect to coupling strength. Our findings have potential applications to systems such as quantum dot arrays and carbon nanotube structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Functional form of the superconducting critical temperature from machine learning

Predicting the critical temperature $T_c$ of new superconductors is a notoriously difficult task, even for electron-phonon paired superconductors, for which the theory is relatively well understood. Early attempts to obtain a simple $T_c$ formula consistent with strong-coupling theory, by McMillan and by Allen and Dynes, led to closed-form approximate relations between $T_c$ and various measures of the phonon spectrum and the electron-phonon interaction appearing in Eliashberg theory. Here we propose that these approaches can be improved with the use of machine-learning algorithms. As an initial test, we train a model for identifying low-dimensional descriptors using the $T_c$ < 10 K dataset by Allen and Dynes, and show that a simple analytical expression thus obtained improves upon the Allen-Dynes fit. Furthermore, the prediction for the recently discovered high-$T_c$ material H 3 S at high pressure is quite reasonable. Interestingly, $T_c$'s for more recently discovered superconducting systems with a more two-dimensional electron-phonon coupling, which do not follow Allen and Dynes's expression, also do not follow our analytic expression. Thus, this machine-learning approach appears to be a powerful method for highlighting the need for a new descriptor beyond those used by Allen and Dynes to describe their set of isotropic electron-phonon coupled superconductors. Finally, we argue that this machine-learning method, and its implied need for a descriptor characterizing Fermi-surface properties, represents a promising approach to superconductor materials discovery which may eventually replace the serendipitous discovery paradigm begun by Kamerlingh Onnes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crossover between strongly coupled and weakly coupled exciton superfluids

Following a crossover Superfluidity in fermionic systems occurs through the pairing of fermions into bosons, which can undergo condensation. Depending on the strength of the interactions between fermions, the pairs range from large and overlapping to tightly bound. The crossover between these two limits has been explored in ultracold Fermi gases. Liu et al . observed the crossover in an electronic system consisting of two layers of graphene separated by an insulating barrier and placed in a magnetic field. In this two-dimensional system, the pairs were excitons formed from an electron in one layer and a hole in the other. The researchers used magnetic field and layer separation to tune the interactions and detected the signatures of superfluidity through transport measurements. —JS

Science & Technology - Other Topics↗

Symmetry-dependent interfacial reconstruction to compensate polar discontinuity at perovskite oxide interfaces (LaAlO{sub 3}/SrTiO{sub 3} and LaAlO{sub 3}/CaTiO{sub 3})

We report the crystal symmetry-dependency of the interfacial reconstruction to relieve the polar discontinuity at the complex oxide heterointerfaces. We chose LaAlO{sub 3}/SrTiO{sub 3} and LaAlO{sub 3}/CaTiO{sub 3} interfaces as model systems, where the neutral TiO{sub 2} and the positive LaO{sup +} layers form the polar discontinuity at the interface with TiO{sub 2}-terminated (001) cubic SrTiO{sub 3} and orthorhombic CaTiO{sub 3}. Using scanning transmission electron microscopy, we observed that the interlayer distance abnormally increased at the interface. We performed the first-principles calculations to understand the detailed atomic displacement at the interfaces having no oxygen vacancy and intermixing. Our results show that cations were reconstructed in different ways depending on the crystal symmetry through the octahedral tilts and atomic displacements to compensate the polar discontinuity at the interfaces. Our results imply that the interfacial reconstructions have to be considered along with the ionic compensation (intermixing) and electronic compensation (two dimensional electron gas) to fully understand the interfacial phenomena.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Control of the high harmonic generation spectra by changing the molecule-laser field relative orientation

The time dependent Schroedinger equation of a homonuclear diatomic molecule in the presence of a linearly polarized laser field is numerically solved by means of a split-operator parallel code. The calculations are carried out by assuming a single active electron model with fixed nuclei; a simplified two-dimensional model of the system is used. The highly nonlinear response of the electron wave function to the laser electric field stimulates the molecule to emit electromagnetic radiation consisting of a wide plateau of odd harmonics of the laser field. It is shown that the emitted spectrum can be finely controlled by changing the angle between the laser electric field and the molecular axis; this can be used to achieve a tunable source of high frequency radiation.

74 ATOMIC AND MOLECULAR PHYSICS↗

2D electron temperature diagnostic using soft x-ray imaging technique

We have developed a two-dimensional (2D) electron temperature (T{sub e}) diagnostic system for thermal structure studies in a low-aspect-ratio reversed field pinch (RFP). The system consists of a soft x-ray (SXR) camera with two pin holes for two-kinds of absorber foils, combined with a high-speed camera. Two SXR images with almost the same viewing area are formed through different absorber foils on a single micro-channel plate (MCP). A 2D T{sub e} image can then be obtained by calculating the intensity ratio for each element of the images. We have succeeded in distinguishing T{sub e} image in quasi-single helicity (QSH) from that in multi-helicity (MH) RFP states, where the former is characterized by concentrated magnetic fluctuation spectrum and the latter, by broad spectrum of edge magnetic fluctuations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Two-dimensional electron gas in GaAs/SrHfO{sub 3} heterostructure

The III-V/perovskite-oxide system can potentially create new material properties and new device applications by combining the rich properties of perovskite-oxides together with the superior optical and electronic properties of III-Vs. The structural and electronic properties of the surface and interface are studied using first-principles calculations for the GaAs/SrHfO{sub 3} heterostructure. We investigate the specific adsorption sites and the atomic structure at the initial growth stage of GaAs on the SrHfO{sub 3} (001) substrate. Ga and As adsorption atoms preferentially adsorb at the top sites of oxygen atoms under different coverage. The energetically favorable interfaces are presented among the atomic arrangements of the GaAs/SrHfO{sub 3} interfaces. Our calculations predict the existing of the two-dimensional electron gas in the GaAs/SrHfO{sub 3} heterostructure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Layer-dependent topological phase in a two-dimensional quasicrystal and approximant

The electronic and topological properties of materials are derived from the interplay between crystalline symmetry and dimensionality. Simultaneously introducing “forbidden” symmetries via quasiperiodic ordering with low dimensionality into a material system promises the emergence of new physical phenomena. Here, we isolate a two-dimensional (2D) chalcogenide quasicrystal and approximant, and investigate their electronic and topological properties. The 2D layers of the materials with a composition close to Ta 1.6 Te, derived from a layered transition metal dichalcogenide, are isolated with standard exfoliation techniques, and investigated with electron diffraction and atomic resolution scanning transmission electron microscopy. Density functional theory calculations and symmetry analysis of the large unit cell crystalline approximant of the quasicrystal, Ta 21 Te 13 , reveal the presence of symmetry-protected nodal crossings in the quasicrystalline and approximant phases, whose presence is tunable by layer number. Our study provides a platform for the exploration of physics in quasicrystalline, low-dimensional materials and the interconnected nature of topology, dimensionality, and symmetry in electronic systems.

36 MATERIALS SCIENCE↗

Dispersion and line shape of plasmon satellites in one, two, and three dimensions

Using state-of-the-art many-body Green's function calculations based on the GW plus cumulant approach, we analyze the properties of plasmon satellites in the electron spectral function resulting from electron-plasmon interactions in one-, two-, and three-dimensional systems. Specifically, we show how their dispersion relation, line shape, and linewidth are related to the properties of the constituent electrons and plasmons. In addition, to gain insight into the many-body processes giving rise to the formation of plasmon satellites, we connect the GW plus cumulant approach to a many-body wave-function picture of electron-plasmon interactions and introduce the coupling-strength-weighted electron-plasmon joint density states as a powerful concept for understanding plasmon satellites.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis and characterization of a two-dimensional piperazinium cobalt–zinc phosphate via a metastable one-dimensional phase

A two-dimensional piperazinium cobalt–zinc phosphate, formulated as (C{sub 4}N{sub 2}H{sub 12}){sub 1.5}(Co{sub 0.6}Zn{sub 0.4}){sub 2}(HPO{sub 4}){sub 2}(PO{sub 4})·H{sub 2}O (2D), was synthesized under hydrothermal conditions. The crystal structure was determined using single-crystal X-ray diffraction data (monoclinic P2{sub 1}/c, a=8.1165(3) Å, b=26.2301(10) Å, c=8.3595(4) Å, and β=110.930(5)°) and the hydrogen atom positions were optimized by DFT calculations. A single-crystal corresponding to one-dimensional metastable phase, (C{sub 4}N{sub 2}H{sub 12})Co{sub 0.3}Zn{sub 0.7}(HPO{sub 4}){sub 2}·H{sub 2}O (1D), was also isolated and the crystal structure was determined (monoclinic P2{sub 1}/c, a=8.9120(6) Å, b=14.0290(1) Å, c=12.2494(5) Å, and β=130.884(6)°). The bulk was characterized by chemical (C–H–N) analysis, powder X-ray diffraction (PXRD), powder X-ray thermodiffractometry (HT-XRD), transmission electron microscopy (STEM(DF)-EDX and EFTEM), and thermal analysis (TG/SDTA-MS), including activation energy data of its thermal decomposition. The magnetic susceptibility and magnetization measurements show no magnetic ordering down to 4 K. - Graphical abstract: Hydrothermal synthesis and structural characterization of a two-dimensional piperazinium cobalt–zinc phosphate, (C{sub 4}N{sub 2}H{sub 12}){sub 1.5}(Co{sub 0.6}Zn{sub 0.4}){sub 2}(HPO{sub 4}){sub 2}(PO{sub 4})·H{sub 2}O (2D), have been reported. The crystal structure of a one-dimensional piperazinium cobalt–zinc phosphate, (C{sub 4}N{sub 2}H{sub 12})Co{sub 0.3}Zn{sub 0.7}(HPO{sub 4}){sub 2}·H{sub 2}O (1D) a metastable phase during the hydrothermal synthesis, was also determined. The thermal behavior of 2D compound is strongly dependent on the selected heating rate and the magnetic susceptibility and magnetization measurements show no magnetic ordering down to 4 K. - Highlights: • A 2D piperazinium cobalt–zinc phosphate has been synthesized and characterized. • Crystal structure of 1D metastable phase was also determined. • Thermal behavior of 2D compound is strongly dependent on the selected heating rate. • Magnetic measurements show no magnetic ordering down to 4 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Facile synthesis and microwave absorbability of C@Ni–NiO core–shell hybrid solid sphere and multi-shelled NiO hollow sphere

We reported the preparation of C@Ni–NiO core–shell hybrid solid spheres or multi-shelled NiO hollow spheres by combining a facile hydrothermal route with a calcination process in H{sub 2} or air atmosphere, respectively. The synthesized C@Ni–NiO core–shell solid spheres with diameters of approximately 2–6 μm were in fact built from dense NiO nanoparticles coated by random two-dimensional metal Ni nanosheets without any visible pores. The multi-shelled NiO hollow spheres were built from particle-like ligaments and there are a lot of pores with size of several nanometers on the surface. Combined Raman spectra with X-ray photoelectron spectra (XPS), it suggested that the defects in the samples play a limited role in the dielectric loss. Compared with the other samples, the permeability of the samples calcined in H{sub 2} and air was increased slightly and the natural resonance frequency shifted to higher frequency (7, 11 and 14 GHz, respectively), leading to an enhancement of microwave absorption property. For the sample calcined in H{sub 2}, an optimal reflection loss less than − 10 was obtained at 7 GHz with a matching thickness of 5.0 mm. Our study demonstrated the potential application of C@Ni–NiO core–shell hybrid solid sphere or multi-shelled NiO hollow sphere as a more efficient electromagnetic (EM) wave absorber. - Highlights: • C@Ni–NiO core–shell hybrid solid sphere was synthesized by a facile method. • Multi-shelled NiO hollow sphere was synthesized by a facile method. • It suggested that the defects in the samples play a limited role in dielectric loss. • The permeability of the samples calcined in H{sub 2} and air was increased. • Microwave absorbability of C@Ni–NiO core–shell hybrid solid sphere was investigated.

36 MATERIALS SCIENCE↗

Structural transition from two-dimensional ZIF-L to three-dimensional ZIF-8 nanoparticles in aqueous room temperature synthesis with improved CO2 adsorption

Highlights: • ZIF-L and ZIF-8 were synthesised with the same molar ratio of reagents (Zn{sup + 2}/Hmim = 8). • TEA threshold loading which was responsible for the phase transition was determined. • The CO{sub 2} desorption was improved due to increase of surface basicity and porosity. - Abstract: A new micron-sized leaf- two-dimensional (2D) structured zeolitic imidazolate framework (ZIF-L) and nano-sized ZIF-8 were successfully synthesised in aqueous basic solution at room temperature with the same molar ratio of reagents (Zn{sup + 2}/Hmim = 8). Both ZIFs have attracted tremendous research interest due to their wide applications including absorption, separation, and catalysis. This phase and morphology change could be tailored by changing the concentration of base-type additive triethylamine (TEA). Also, this morphology change from 2D (ZIF-L) to three-dimensional (3D) (ZIF-8) was observed by X-ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), attenuated total reflectance infrared (ATR-IR) spectroscopy analysis, and surface area and pore textural properties using micromeritics gas adsorption analyser. The total amount of basic sites and carbon dioxide (CO{sub 2}) desorption capacity were also calculated using CO{sub 2} temperature-programmed desorption (CO{sub 2}-TPD) technique. Furthermore, TEA/total mole ratio of 0.0006 was proved as transition loading between two phases. Also, the particle and crystal size of samples decreased with increasing TEA/total mole ratio. The smallest ZIF-L and ZIF-8 particles obtained were 1.6 μm and 177 nm, respectively that showed excellent thermal stability. The basicity and uptakes of CO{sub 2} improved proportionally with TEA and followed this order: ZIF-8 > ZIF-L. This study provides some new insights into zeolitic imidazolate framework by controlling crystal growth and morphology.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Aqueous solution synthesis and photoluminescence properties of two-dimensional dendritic PbWO{sub 4} nanostructures

Graphical abstract: PbWO{sub 4} two-dimensional dendritic nanostructures (2DDNs) were prepared at room temperature through a facile aqueous solution route using only Pb(NO{sub 3}){sub 2} and Na{sub 2}WO{sub 4} as reaction reagents and distilled water as solvent. - Highlights: • Two-dimensional dendritic PbWO4 nanostructures were prepared through a facile aqueous solution route at room temperature. • A “two-step” growth mechanism was proposed for the formation of two-dimensional dendritic PbWO4 nanostructures. • The two-dimensional dendritic PbWO4 nanostructures exhibit good photoluminescence properties. - Abstract: PbWO{sub 4} two-dimensional dendritic nanostructures (2DDNs) were prepared at room temperature through a facile aqueous solution route. X-ray diffraction, scanning electron microscope, transmission electron microscope and X-ray energy dispersive spectrometer were used to characterize the obtained samples. The PbWO{sub 4} 2DDN was in one plane, with a nearly circular shape and sizes of ∼10 μm. The PbWO{sub 4} 2DDNs were composed of curved nanowires around 200 nm in diameters, which were connected together to form a network nanostructure. The effects of reaction conditions including the concentration of react reagents, the reaction temperature, and the reaction time were systematically investigated and a possible formation mechanism for the formation of 2DDNs was proposed. The optical properties, such as UV–vis spectra and photoluminescence spectra of PbWO{sub 4}, were studied. The advantages of this synthetic route include the first synthesis of PbWO{sub 4} 2DDNs, simple synthetic procedure, room reaction temperature, and high reproducibility of the process.

36 MATERIALS SCIENCE↗

Highly anisotropic conductivity of tablets pressed from polyaniline-montmorillonite nanocomposite

Highlights: • Montmorillonite (MMT) can be intercalated with polyaniline (PANI) chains. • Tablets pressed from PANI/MMT exhibit high anisotropy in electrical conductivity. • Pressure 28MPa is sufficient to reach the anisotropy. • Tablets pressed from pure PANI also exhibit anisotropy in electrical conductivity. - Abstract: Polyaniline-montmorillonite nanocomposite was prepared from anilinium sulfate (precursor) and ammonium peroxodisulfate (oxidizing agent) using simple one-step method. The resulting nanocomposite obtained in powder form has been pressed into tablets using various compression pressures (28–400 MPa). Electrical conductivities of tablets in two perpendicular directions, i.e. direction parallel with the main surface of tablet (σ=) and in orthogonal direction (σ⊥), and corresponding anisotropy factors (i.e., the ratio σ=/σ⊥) have been studied in dependence on compression pressure used during the preparation. Polyaniline-montmorillonite nanocomposite was characterized using X-ray diffraction analysis, raman spectroscopy, transmission electron microscopy, thermogravimetric analysis and molecular modeling which led to the understanding of the internal structure. Measurement of hardness performed on pressed tablets has been also involved. Taking into account the highest value of anisotropy factor reached (σ=/σ⊥ = 490), present study shows a chance to design conductors with nearly two-dimensional conductivity.

36 MATERIALS SCIENCE↗

Observations of two-dimensional monolayer zinc oxide

Highlights: • Synthesis of planer ZnO nanostructure. • Observation of multilayered and monolayer ZnO. • DFT calculation of (10-10), (11-20) and (0 0 0 1) planes of ZnO. • Stability of non-polar (10-10) and (11-20) planes of ZnO. - Abstract: This letter reports the observations of planar two-dimensional ZnO synthesized using the hydrothermal growth technique. High-resolution transmission electron microscopy revealed the formation of a two-dimensional honeycomb lattice and aggregated structures of layered ZnO. The nonpolar (10-10) and (11-20) planes were present in the X-ray diffraction patterns, but the characteristic (0 0 0 1) peak of bulk ZnO was absent. The study found that nonpolar freestanding ZnO structures composed of a single or few layers may be more stable and may have a higher probability of formation than their polar counterparts. The stability of the nonpolar two-dimensional hexagonal ZnO slabs is supported by density functional theory studies.

36 MATERIALS SCIENCE↗

Domain engineering of physical vapor deposited two-dimensional materials

Physical vapor deposited two-dimensional (2D) materials span larger areas compared to exfoliated flakes, but suffer from very small grain or domain sizes. In this letter, we fabricate freestanding molybdenum disulfide (MoS{sub 2}) and amorphous boron nitride (BN) specimens to expose both surfaces. We performed in situ heating in a transmission electron microscope to observe the domain restructuring in real time. The freestanding MoS{sub 2} specimens showed up to 100× increase in domain size, while the amorphous BN transformed in to polycrystalline hexagonal BN (h-BN) at temperatures around 600 °C much lower than the 850–1000 °C range cited in the literature.

36 MATERIALS SCIENCE↗

Thickness modulated MoS{sub 2} grown by chemical vapor deposition for transparent and flexible electronic devices

Two-dimensional (2D) materials have been a great interest as high-performance transparent and flexible electronics due to their high crystallinity in atomic thickness and their potential for variety applications in electronics and optoelectronics. The present study explored the wafer scale production of MoS{sub 2} nanosheets with layer thickness modulation from single to multi-layer by using two-step method of metal deposition and CVD process. The formation of high-quality and layer thickness-modulated MoS{sub 2} film was confirmed by Raman spectroscopy, AFM, HRTEM, and photoluminescence analysis. The layer thickness was identified by employing a simple method of optical contrast value. The image contrast in green (G) channel shows the best fit as contrast increases with layer thickness, which can be utilized in identifying the layer thickness of MoS{sub 2}. The presence of critical thickness of Mo for complete sulphurization, which is due to the diffusion limit of MoS{sub 2} transformation, changes the linearity of structural, electrical, and optical properties of MoS{sub 2}. High optical transparency of >90%, electrical mobility of ∼12.24 cm{sup 2} V{sup −1} s{sup −1}, and I{sub on/off} of ∼10{sup 6} characterized within the critical thickness make the MoS{sub 2} film suitable for transparent and flexible electronics as compared to conventional amorphous silicon (a-Si) or organic films. The layer thickness modulated large scale MoS{sub 2} growth method in conjunction with the layer thickness identification by the nondestructive optical contrast will definitely trigger development of scalable 2D MoS{sub 2} films for transparent and flexible electronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗