Search NASA⌕ Search

SEARCH · Search NASA

Results for “Two-dimensional analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Temperature distributions and thermal stresses in a graded zirconia/metal gas path seal system for aircraft gas turbine engines

A ceramic/metallic aircraft gas turbine outer gas path seal designed for improved engine performance was studied. Transient temperature and stress profiles in a test seal geometry were determined by numerical analysis. During a simulated engine deceleration cycle from sea-level takeoff to idle conditions, the maximum seal temperature occurred below the seal surface, therefore the top layer of the seal was probably subjected to tensile stresses exceeding the modulus of rupture. In the stress analysis both two- and three-dimensional finite element computer programs were used. Predicted trends of the simpler and more easily usable two-dimensional element programs were borne out by the three-dimensional finite element program results.

Taylor, C. M.↗
NASA NTRS1978

Two-dimensional computer code for design assessment of SRM aft closure environment

A general interpolants method for constructing numerical analogs of the partial differential equations of continuum mechanics and which combines the best features of both finite element and finite difference methods was used in a two dimensional axisymmetric analysis of the space shuttle solid motor aft closure region flowfield. The numerical technique used is discussed as well as the results of the analysis. A steady state solution for the submerged nozzle nose region indicates the development of an area gas flow recirculation near the propellant burning surface boundary and in the region of the underside of the nozzle nose. This recirculation region remains spatially fixed for successive iterations (greater than 800) of the solution.

Freeman, J. A.↗
NASA NTRS1977

Computational models for the analysis of three-dimensional internal and exhaust plume flowfields

This paper describes computational procedures developed for the analysis of three-dimensional supersonic ducted flows and multinozzle exhaust plume flowfields. The models/codes embodying these procedures cater to a broad spectrum of geometric situations via the use of multiple reference plane grid networks in several coordinate systems. Shock capturing techniques are employed to trace the propagation and interaction of multiple shock surfaces while the plume interface, separating the exhaust and external flows, and the plume external shock are discretely analyzed. The computational grid within the reference planes follows the trace of streamlines to facilitate the incorporation of finite-rate chemistry and viscous computational capabilities. Exhaust gas properties consist of combustion products in chemical equilibrium. The computational accuracy of the models/codes is assessed via comparisons with exact solutions, results of other codes and experimental data. Results are presented for the flows in two-dimensional convergent and divergent ducts, expansive and compressive corner flows, flow in a rectangular nozzle and the plume flowfields for exhausts issuing out of single and multiple rectangular nozzles.

Dash, S. M.↗
NASA NTRS1977

On the alignment of plasma anisotropies and the magnetic field direction in the solar wind

One year's Imp 6 solar wind plasma and magnetic field data are examined to determine whether anisotropies in particle velocity distributions are aligned with the measured interplanetary magnetic field vector. Alignment of components in the analysis plane was generally found to be excellent whenever plasma parameter magnitudes were larger than determination uncertainties, although some spread exists (typical rms approximately equal to 10 deg). By assuming cylindrical symmetry about the simultaneously measured magnetic field vector during the 1-year interval under study, three-dimensional values of selected solar wind plasma thermal parameters were constructed from the two-dimensional plasma measurements, and the statistical properties of their distributions have been tabulated.

Asbridge, J. R.↗
NASA NTRS1978

Three-dimensional effects on pure tone fan noise due to inflow distortion

A theoretical analysis of pure tone fan noise generated by inflow distortion-rotor interaction is carried out with the aid of the three-dimensional unsteady lifting surface theory developed by Namba (1977, 1974). Particular attention is given to a study of the accuracy of available two-dimensional theory for the prediction of pure tone fan noise due to the interaction of inflow distortion with a subsonic annular blade row. The theoretical model considered consists of a single three-dimensional annular cascade rotating at constant angular velocity in an annular rigid-wall duct of infinite axial extent. Attention is given to the fluctuating pressure induced by a rotor blade row, the fluctuating velocity induced by it, an inflow distortion with only an axial velocity component, the determination of acoustic dipole distribution, the pure tone acoustic power, and two-dimensional theory and quasi-three-dimensional theory.

Kobayashi, H.↗
NASA NTRS1978

Continuum modeling of three-dimensional truss-like space structures

A mathematical and computational analysis capability has been developed for calculating the effective mechanical properties of three-dimensional periodic truss-like structures. Two models are studied in detail. The first, called the octetruss model, is a three-dimensional extension of a two-dimensional model, and the second is a cubic model. Symmetry considerations are employed as a first step to show that the specific octetruss model has four independent constants and that the cubic model has two. The actual values of these constants are determined by averaging the contributions of each rod element to the overall structure stiffness. The individual rod member contribution to the overall stiffness is obtained by a three-dimensional coordinate transformation. The analysis shows that the effective three-dimensional elastic properties of both models are relatively close to each other.

Nayfeh, A. H.↗
NASA NTRS1978

Analysis of three-dimensional ducted and exhaust plume flowfields

Computational procedures are described for analyzing three-dimensional supersonic internal flows and multinozzle exhaust plume flowfields. The computer codes (BIGMAC and CHAR3D) embodying these procedures cater to a broad spectrum of geometric situations via the use of multiple reference plane grid networks in several coordinate systems. Shock capturing techniques are employed to trace the propagation and interaction of multiple shock surfaces. Gas properties consist of combustion products in chemical equilibrium. The computational accuracy of the codes is assessed via comparisons with the results of other codes and experimental data. Results are presented for the flows in two-dimensional ducts, corner flows, flow in a rectangular nozzle, and the plume flowfields for exhausts issuing out of single and multiple rectangular nozzles.

Dash, S. M.↗
NASA NTRS1978

Three-dimensional finite strip analysis of elastic solids

Finite element shape functions were combined with beam eigenfunctions to formulate three-dimensional finite strips. Because of the orthogonality of the beam functions, three-dimensional problems were reduced to a series of two-dimensional problems, often with stiffness matrices of very narrow bandwidth. Isoparametric and high order finite element shape functions were used in the formulation of the 3-D finite strips. Numerical examples such as the static and free vibration analyses of simply supported thick plates are presented. Results were compared with existing solutions and good agreements were obtained in all cases.

Cheung, M. S.↗
NASA NTRS1978

User's guide to computer programs JET 5A and CIVM-JET 5B to calculate the large elastic-plastic dynamically-induced deformations of multilayer partial and/or complete structural rings

These structural ring deflections lie essentially in one plane and, hence, are called two-dimensional (2-d). The structural rings may be complete or partial; the former may be regarded as representing a fragment containment ring while the latter may be viewed as a 2-d fragment-deflector structure. These two types of rings may be either free or supported in various ways (pinned-fixed, locally clamped, elastic-foundation supported, mounting-bracket supported, etc.). The initial geometry of each ring may be circular or arbitrarily curved; uniform-thickness or variable-thickness rings may be analyzed. Strain-hardening and strain-rate effects of initially-isotropic material are taken into account. An approximate analysis utilizing kinetic energy and momentum conservation relations is used to predict the after-impact velocities of each fragment and of the impact-affected region of the ring; this procedure is termed the collision-imparted velocity method (CIVM) and is used in the CIVM-JET 5 B program. This imparted-velocity information is used in conjunction with a finite-element structural response computation code to predict the transient, large-deflection, elastic-plastic responses of the ring. Similarly, the equations of motion of each fragment are solved in small steps in time. Provisions are made in the CIVM-JET 5B code to analyze structural ring response to impact attack by from 1 to 3 fragments, each with its own size, mass, translational velocity components, and rotational velocity. The effects of friction between each fragment and the impacted ring are included.

Wu, R. W. H.↗
NASA NTRS1979

Supercritical wing design using numerical optimization and comparisons with experiment

A numerical minimization scheme is used in conjunction with two-dimensional and three-dimensional inviscid transonic flow analysis codes to provide procedures for wing leading edge aerodynamic design. The procedures are demonstrated in the design of a new leading edge to improve C-141 cruise performance. For the high aspect ratio moderately swept C-141 wing, the 2-D procedure is shown to yield results which are in close agreement with those obtained using the 3-D technique. Although the 2-D approach uses much less computation time than the 3-D technique, the latter requires fewer manhours than the former. Comparisons of predicted and wind tunnel measured performance improvements are presented which verify the design procedures.

Lores, M. E.↗
NASA NTRS1978

Crack extension from flaws in a brittle material subjected to compression

The mechanisms by which cracks extend from flaws in brittle materials subjected to compressive loads are presented. Although it is recognized that most geological materials are neither dense nor single-phase, this experimental study and analysis are restricted to single-phase, dense materials in order to provide a model amenable to analysis and experimental confirmation. The flaws which occur in dense, single-phase materials are divided into three types, each type having different characteristics of crack extension. Experimental studies of crack extension from flaws introduced into blocks of polymethylmethacrylate plastic are described. The studies show that crack extension from three dimensional flaws is more complex than two-dimensional theories predict. The extension of secondary cracks may result in more damage than that which would be predicted by considering only the primary crack extension treated by current theories. The importance of the dynamic behavior of flaws which stick and then suddenly slip is shown.

Adams, M.↗
NASA NTRS1979

Time-dependent difference theory for noise propagation in a two-dimensional duct

A time dependent numerical formulation was derived for sound propagation in a two dimensional straight soft-walled duct in the absence of mean flow. The time dependent governing acoustic-difference equations and boundary conditions were developed along with the maximum stable time increment. Example calculations were presented for sound attenuation in hard and soft wall ducts. The time dependent analysis were found to be superior to the conventional steady numerical analysis because of much shorter solution times and the elimination of matrix storage requirements.

Baumeister, K. J.↗
NASA NTRS1978

Interaction of a two-dimensional strip boundary layer with a three-dimensional transonic swept-wing code

A 3D inviscid transonic analysis code was combined with a 2D strip integral boundary layer technique to form an approximate interaction procedure for analyzing the flow over a high aspect ratio wing near cruise conditions. Converged results obtained using the procedure for an aspect ratio 10.3 supercritical wing are discussed. Angle of attack adjustments were made during the iterative procedure in order to compensate for the viscous lift loss. A comparison of the calculations with experimental data is presented.

Newman, P. A.↗
NASA NTRS1979

Two-dimensional finite-element analyses of simulated rotor-fragment impacts against rings and beams compared with experiments

Finite element modeling alternatives as well as the utility and limitations of the two dimensional structural response computer code CIVM-JET 4B for predicting the transient, large deflection, elastic plastic, structural responses of two dimensional beam and/or ring structures which are subjected to rigid fragment impact were investigated. The applicability of the CIVM-JET 4B analysis and code for the prediction of steel containment ring response to impact by complex deformable fragments from a trihub burst of a T58 turbine rotor was studied. Dimensional analysis considerations were used in a parametric examination of data from engine rotor burst containment experiments and data from sphere beam impact experiments. The use of the CIVM-JET 4B computer code for making parametric structural response studies on both fragment-containment structure and fragment-deflector structure was illustrated. Modifications to the analysis/computation procedure were developed to alleviate restrictions.

Stagliano, T. R.↗
NASA NTRS1979

An experimental and analytical investigation of the rail shear-test method as applied to composite materials

This report presents the results from an experimental and analytical investigation of the stress distributions occurring in a rail shear test. The effects of non-uniform stresses induced by differential thermal expansion, rail flexibility and specimen aspect ratio on measured shear modulus and ultimate strength of composite laminates are shown. A two-dimensional linearly elastic finite element model was used to analytically determine how various geometric parameters influenced the magnitude and distribution of inplane normal and shear stresses in a tensile rail shear specimen. Rail shear tests were conducted at room temperature and 589 K (600 F) on selected graphite-polyimide composite laminates using two titanium rail configurations. The analysis and test methods are discussed, and the results of the effects of the various parameters on shear modulus and ultimate strength are presented.

Garcia, R.↗
NASA NTRS1980

Transonic swept-wing analysis using asymptotic and other numerical methods

The paper presents asymptotic methods for high-aspect-ratio wings in transonic flow developed for straight unyawed wings and for oblique wings. They show that the three-dimensional mixed-flow calculations may be reduced to solving a set of two-dimensional problems at each span station; the development of this theory and the related computational studies are reviewed. Differences between the piloted (oblique) wing, the swept-back wing, and the swept-forward-wing in the induced upwash are discussed; examples of similarity solutions are demonstrated for high subcritical and slightly supercritical component flows, and comparisons made with relaxation solutions of a full potential equation. The examples include oblique and symmetric swept wings, and the adequacy of the existing full-potential computer code is examined.

Cheng, H. K.↗
NASA NTRS1980

Model error estimation for large space systems

In-flight estimation of large structure model errors may have to be carried out in order to detect inevitable deficiencies in large structure controller/estimator models. These error estimates can most efficiently be obtained by the minimization of a quadratic functional of the model errors and on the subsequent analysis of the resulting optimal model error estimates. An integral operator approach to estimation leads to a geometrical interpretation of the model error estimation process. One of the significant insights gained with this interpretation is that the actual but unknown model errors can be decomposed as the sum of two distinct components that are orthogonal in some sense. One of these components is a so-called minimal error vector that retains many of the significant dynamics of the actual errors. The basic ideas in the model error estimation approach are first set forth with a two-dimensional analogy that has most of the essential features of the general estimation problem. The generalized results are then established and their application to a reference large structure model illustrated.

Rodriguez, G.↗
NASA NTRS1951

Flow through cascades in tandem

An exact treatment of the problem of finding the incompressible, inviscid two-dimensional flow around two cascades in tandem is presented. The analysis includes solutions of both the direct and the inverse problems. These problems are solved by conformally mapping the tandem cascade onto the region between two concentric circles in which region there are suitably placed flow singularities. Formulas for the velocity and the potential in the annular region are presented in a closed form by means of elliptic functions. The equations are presented in a form suitable for computation.

Spraglin, William E↗