Search NASA⌕ Search

SEARCH · Search NASA

Results for “UV”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Zero-biased and visible-blind UV photodetectors based on nitrogen-doped ultrananocrystalline diamond nanowires

Taking advantage of the superflat surface of ultrananocrystalline diamond (UNCD), highly precise UNCD nanowire (NW) arrays were fabricated to develop high-performance UV photodetectors. The large surface-to-volume ratio of a nanowire significantly increases the number of surface trap states, and the reduced dimensionality effectively confines the active area of the charge carrier and shortens the transit time, which results in an enhanced photoconductivity and response speed. Here, in this paper, the zero-biased UV photodetectors based on nitrogen-incorporated ultrananocrystalline diamond nanowire arrays have been demonstrated and characterized. The estimated responsivity was 2.0 A/W for 350 nm incident light when the device operated at room temperature. The UVA and UVB photocurrent signals from this visible blind photodetector were well defined with a rise and decay time of less than 1 s.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Preliminary Studies of UV Photolysis of Gas-phase CH3I in Air: Time-resolved Infrared Identification of Methanol and Formaldehyde Products

Halogen-bearing compounds are known to photolyze under UV radiation; analysis of degradation products is of interest for both safety and environmental considerations. Time-resolved infrared spectroscopy was used in the laboratory to study the UV-photolysis of methyl iodide. Photolysis products methanol (CH3OH) and formaldehyde (HCHO) were clearly identified in a time-resolved manner. Preliminary kinetic models predict the formation of both CH3OH and HCHO.

Hughey, Kendall D.↗
DOE OSTI2020

Localized UV emitters on the surface of β-Ga 2 O 3

Abstract Monoclinic gallium oxide (β-Ga 2 O 3 ) is attracting intense focus as a material for power electronics, thanks to its ultra-wide bandgap (4.5–4.8 eV) and ability to be easily doped n -type. Because the holes self-trap, the band-edge luminescence is weak; hence, β-Ga 2 O 3 has not been regarded as a promising material for light emission. In this work, optical and structural imaging methods revealed the presence of localized surface defects that emit in the near-UV (3.27 eV, 380 nm) when excited by sub-bandgap light. The PL emission of these centers is extremely bright—50 times brighter than that of single-crystal ZnO, a direct-gap semiconductor that has been touted as an active material for UV devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Surmounting the interband threshold limit by the hot electron excitation of multi-metallic plasmonic AgAuCu NPs for UV photodetector application

We report multi-metallic alloy NPs composed of various elemental compositions can surmount the interband threshold limit of mono-metallic NPs and thus can offer a promising route to boost up the performance limit of conventional ultraviolet photodetectors (PDs). In this work, a hybrid UV-PD configuration has been demonstrated by combining the multi-metallic plasmonic alloy NPs of AgCu, AuCu, and AgAuCu on a GaN photoactive layer in order to exploit the improved photo carrier injection by the strong hot electrons and LSPR. Among various devices, the tri-metallic AgAuCu NP PD demonstrates the highest performance with a remarkably high photocurrent of 1.47 x 10 -2 A at 1 V with fast rise (T r ) and fall (T f ) times of 170 and 700 ms with a very stable current. This leads to the superior figure-of-merit parameters of the PD with a photoresponsivity of 4.3 x 10 6 mA W-1, detectivity of 3.52 x 10 12 Jones and EQE of 1.39 x 10 6 %, which is ~16 times higher than the bare GaN PD. This ranks the AgAuCu PD as one of the best GaN based UV photodetectors. The photocurrent enhancement and excellent figure-of-merit can be attributed to the significantly increased photo carrier injection by the efficient hot electron generation via the LSPR and improved interfacial barrier characteristics by the tri-metallic elemental synergy.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Carbazole-substituted benzobisoxazoles: near-UV fluorescent emitters and ambipolar hosts for organic light-emitting diodes

The design of organic light emitting diode (OLED) materials with the potential for exhibiting thermally-activated delayed fluorescence (TADF) is reported. Using computational methods (DFT/TD-DFT) as a guiding tool, six materials with a benzobisoxazole (BBO) core and donor–acceptor–donor architectures were designed by changing the conjugation position of carbazole-substituted phenyl substituents and the type of BBO isomer (cis- vs. trans-). Experimental steady-state and transient absorption spectroscopic techniques were utilized to probe the TADF activity of these molecules. Each material was then used in host–guest OLED devices as either near-UV dopants or host with low singlet-triplet energy differences. The electroluminescent properties show that when used as dopants these materials provide near-UV emission (CIE y < 0.06 and CIE x = 0.16), whereas when used as hosts, these materials show reduced operating voltages and increased performance efficiencies when compared to commercial materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The Chandra view of the relation between X-ray and UV emission in quasars

Here, we present a study of the relation between X-rays and ultraviolet emission in quasars for a sample of broad-line, radio-quiet objects obtained from the cross-match of the Sloan Digital Sky Survey DR14 with the latest Chandra Source Catalog 2.0 (2332 quasars) and the Chandra COSMOS Legacy survey (273 quasars). The non-linear relation between the ultraviolet (at 2500 Å, L UV ) and the X-ray (at 2 keV, L X ) emission in quasars has been proved to be characterised by a smaller intrinsic dispersion than the observed one, as long as a homogeneous selection, aimed at preventing the inclusion of contaminants in the sample, is fulfilled. By leveraging on the low background of Chandra, we performed a complete spectral analysis of all the data available for the SDSS-CSC2.0 quasar sample (i.e. 3430 X-ray observations), with the main goal of reducing the uncertainties on the source properties (e.g. flux, spectral slope). We analysed whether any evolution of the L X – L UV relation exists by dividing the sample in narrow redshift intervals across the redshift range spanned by our sample, z ≃ 0.5–4. We find that the slope of the relation does not evolve with redshift and it is consistent with the literature value of 0.6 over the explored redshift range, implying that the mechanism underlying the coupling of the accretion disc and hot corona is the same at the different cosmic epochs. We also find that the dispersion decreases when examining the highest redshifts, where only pointed observations are available. These results further confirm that quasars are ‘standardisable candles’, that is we can reliably measure cosmological distances at high redshifts where very few cosmological probes are available.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

The R-Process Alliance: Hunting for gold in the near-UV spectrum of 2MASS J05383296–5904280

Over the past few years, the R-Process Alliance (RPA) has successfully carried out a search for stars that are highly enhanced in elements produced via the rapid neutron-capture (r-) process. In particular, the RPA has identified a number of relatively bright, highly r-process-enhanced (r-II) stars, suitable for observations with the Hubble Space Telescope (HST), facilitating abundance derivation of elements such as gold (Au) and cadmium (Cd). This paper presents the detailed abundances derived for the metal-poor ([Fe/H] = −2.55) highly r-process-enhanced ([Eu/Fe] = +1.29) r-II star 2MASS J05383296–5904280. One-dimensional local thermodynamic equilibrium (LTE) elemental abundances were derived via equivalent width and spectral synthesis using high-resolution high signal-to-noise near-UV HST/STIS and optical Magellan/MIKE spectra. Abundances were determined for 43 elements, including 26 neutron-capture elements. In particular, abundances of the rarely studied elements Nb, Mo, Cd, Lu, Os, Pt, and Au are derived from the HST spectrum. These results, combined with RPA near-UV observations of two additional r-II stars, increase the number of Cd abundances derived for r-process-enriched stars from seven to ten and Au abundances from four to seven. A large star-to-star scatter is detected for both of these elements, highlighting the need for more detections enabling further investigations, specifically into possible non-LTE effects.

chemically peculiar stars↗
DOE OSTI2020

Excited state dynamics of cis , cis -1,3-cyclooctadiene: UV pump VUV probe time-resolved photoelectron spectroscopy

We present UV pump, vacuum ultraviolet probe time-resolved photoelectron spectroscopy measurements of the excited state dynamics of cis,cis-1,3-cyclooctadiene. A 4.75 eV deep UV pump pulse launches a vibrational wave packet on the first electronically excited state, and the ensuing dynamics are probed via ionization using a 7.92 eV probe pulse. The experimental results indicate that the wave packet undergoes rapid internal conversion to the ground state in under 100 fs. Comparing the measurements with electronic structure and trajectory surface hopping calculations, we are able to interpret the features in the measured photoelectron spectra in terms of ionization to several states of the molecular cation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Impact of UV-induced ozone and low-energy Ar + -ion cleaning on the chemical structure of Cu(In,Ga)(S,Se) 2 absorber surfaces

Dry buffer layer deposition techniques for chalcopyrite (CIGSSe)-based thin-film solar cells lack the surface-cleaning characteristics of the commonly used CdS or Zn(O,S) wet-chemical bath deposition. Here, a UV-induced ozone and/or a low-energy Ar + -ion treatment could provide dry CIGSSe surface cleaning steps. To study the impact of these treatments, the chemical surface structure of a CIGSSe absorber is investigated. For this purpose, a set of surface-sensitive spectroscopic methods, i.e., laboratory-based x-ray photoelectron spectroscopy and x-ray-excited Auger electron spectroscopy, is combined with synchrotron-based soft x-ray emission spectroscopy. After treatment times as short as 15 s, the UV-induced ozone treatment decreases the amount of carbon adsorbates at the CIGSSe surface significantly, while the oxygen content increases. This is accompanied by the oxidation of all absorber surface elements, i.e., indium, selenium, sulfur, and copper. Short (60 s) low-energy Ar + -ion treatments, in contrast, primarily remove oxygen from the surface. Longer treatment times also lead to a removal of carbon, while extremely long treatment times can also lead to additional (likely metallic) Cu phases at the absorber surface as well.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Neutron radiation hardness of aluminum gallium nitride UV LEDs at various wavelengths

Radiation hard diagnostics are critical to the success of nuclear fusion at National Ignition Facility, Z, ITER, and prolonged space explorations. We have first demonstrated the exceptional proton radiation hardness of initial GaN devices and qualified their space flight and deployment for missions such as the Laser Interferometer Space Antenna and International Space Station. We have further conducted neutron radiation hardness experiments at Los Alamos Neutron Science Center by opening a new high fluence beam station. During 2014–2016, we irradiated multiple Aluminum Gallium Nitride (AlGaN) LEDs with a maximum fluence of 2.4 × 1013 neutrons/cm2 in 3 years and generated 54 161 current–voltage (I–V) scan traces. Our data processing program analyzes each and all I–V traces. In addition, we retrieved local temperature records to analyze and remove temperature effects in the outdoor environment. The I–V curve families of AlGaN UV LEDs with emitting wavelengths of 265, 275, and 310 nm were compared. The I–V curves of 265 nm AlGaN UV LEDs have the smallest deviations from the average value, while the I–V curves for 310 nm AlGaN LEDs showed the largest deviations from the average value. We have reached another important recommendation for the optimal use of multiple AlGaN optoelectronic devices or imaging arrays for inertially confined fusion diagnostics: Shorter wavelength devices at 265 nm exhibit more consistent radiation hardness performance than the 310 nm devices. Higher aluminum content LEDs or AlxGa1–xN devices with higher mole fraction x for generating shorter wavelengths have better radiation hardness for fusion diagnostics.

Sun, K. -X. (ORCID:0000000224659235)↗
DOE OSTI2021

Investigation of UV, ns-laser damage resistance of hafnia films produced by electron beam evaporation and ion beam sputtering deposition methods

Laser-induced damage in coating materials with a high index of refraction, such as hafnia, limits the performance of high power and high energy laser systems. Understanding the underlying physics responsible for laser damage holds the key for developing damage-resistant optical films. Previous studies have reported a substantial difference in laser damage onset for hafnia films produced by different deposition methods, yet the underlying mechanisms for the observed difference remain elusive. We combined laser damage testing with analytical characterizations and theoretical simulations to investigate the response of hafnia films produced by electron (e-) beam evaporation vs ion beam sputtering (IBS) methods upon UV ns-laser exposure. We found that e-beam produced hafnia films were overall more damage resistant; in addition, we observed a polarization anisotropy associated with the onset of damage in the e-beam films, while this effect was absent in the latter films. The observed differences can be attributed to the stark contrast in the pressure inside the pores inherent in both films. The high pressure inside the IBS-induced nanobubbles has been shown to reduce the threshold for laser-induced plasma breakdown leading to film damage. The polarization effects in the e-beam coatings can be related to the asymmetric electric field intensification induced by the columnar void structure. Our findings provide a fundamental basis for developing strategies to produce laser damage-resistant coatings for UV pulsed laser applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Probing C–I bond fission in the UV photochemistry of 2-iodothiophene with core-to-valence transient absorption spectroscopy

The UV photochemistry of small heteroaromatic molecules serves as a testbed for understanding fundamental photo-induced chemical transformations in moderately complex compounds, including isomerization, ring-opening, and molecular dissociation. Here, a combined experimental-theoretical study of 268 nm UV light-induced dynamics in 2-iodothiophene (C 4 H 3 IS) is performed. The dynamics are experimentally monitored with a femtosecond extreme ultraviolet (XUV) probe that measures iodine N-edge 4d core-to-valence transitions. Experiments are complemented by density functional theory calculations of both the pump-pulse induced valence excitations and the XUV probe-induced core-to-valence transitions. Possible intramolecular relaxation dynamics are investigated by ab initio molecular dynamics simulations. Furthermore, gradual absorption changes up to ~0.5 to 1 ps after excitation are observed for both the parent molecular species and emerging iodine fragments, with the latter appearing with a characteristic rise time of 160 ± 30 fs. Comparison of spectral intensities and energies with the calculations identifies an iodine dissociation pathway initiated by a predominant π → π* excitation. In contrast, initial excitation to a nearby n ⟂ → σ* state appears unlikely based on a significantly smaller oscillator strength and the absence of any corresponding XUV absorption signatures. Excitation to the π → π* state is followed by contraction of the C–I bond, enabling a nonadiabatic transition to a dissociative π→σ C-I * state. For the subsequent fragmentation, a relatively narrow bond-length region along the C–I stretch coordinate between 230 and 280 pm is identified, where the transition between the parent molecule and the thienyl radical + iodine atom products becomes prominent in the XUV spectrum due to rapid localization of two singly occupied molecular orbitals on the two fragments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Characterization of the upgraded single-line-of-sight time-resolved x-ray imager using short-pulse visible and UV lasers

The single-line-of-sight time-resolved x-ray imager (SLOS-TRXI), a fast-gated x-ray imager used for capturing x-ray self-emission in inertial confinement fusion experiments on OMEGA, has been upgraded and characterized. SLOS-TRXI combines an electron-dilation imager and a hybrid complementary metal–oxide–semiconductor (hCMOS) sensor to capture multiple gated frames on a single line of sight with a temporal resolution of ~40 ps and a spatial resolution of 10 µm. The original hCMOS sensor with four frames was replaced with a newer-generation hCMOS sensor having eight frames. Gate characterizations of both the sensor and the entire SLOS-TRXI diagnostic were performed using ~10-ps FWHM visible (2ω) and UV (4ω) short-pulse lasers, respectively. A stepped echelon was used to generate a train of five UV laser pulses having an interpulse separation of 30 ± 3 ps. Characterization results of the hCMOS gating (2.28 ± 0.02-ns FWHM on average) and a temporal resolution of the upgraded SLOS-TRXI (34 ± 4-ps FWHM on average) are presented. A temporal magnification for the electron-dilation imager between 40 and 60 was inferred from the characterization results. Furthermore, the spatial resolution of the upgraded SLOS-TRXI remains the same in light of this work.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Formation and optical properties of indium nanoparticle arrays for deep-UV plasmonics

We utilize a combined computational-experimental approach to examine the influence of indium nanoparticle (NP) array distributions on deep-ultraviolet (UV) plasmon resonances. For photon energies < 5.7 eV, analysis of ellipsometric spectra reveals an increase in silicon reflectance induced by indium NP arrays on silicon. For various energies in the range 5.7–7.0 eV, a decrease in reflectance is induced by the NP arrays. Similar trends in reflectance are predicted from finite-difference time-domain (FDTD) simulations using NP size distributions extracted from atomic-force micrographs as input. In addition, in the energy range of 7.4–9.2 eV, the FDTD simulations reveal reflectance minima, characteristic of localized surface plasmon resonances. Here, electron energy-loss spectroscopy collected from individual indium NPs reveals the presence of LSPR at ≈ 8 eV, further supporting the promise of indium NP arrays on silicon for deep-UV plasmonics.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Imaging transient molecular configurations in UV-excited diiodomethane

Femtosecond structural dynamics of diiodomethane (CH 2 I 2 ) triggered by ultraviolet (UV) photoabsorption at 290 and 330 nm are studied using time-resolved coincident Coulomb explosion imaging driven by a near-infrared probe pulse. Here, we map the dominant single-photon process, the cleavage of the carbon–iodine bond producing rotationally excited CH 2 I radical, identify the contributions of the three-body (CH 2 + I + I) dissociation and molecular iodine formation channels, which are primarily driven by the absorption of more than one UV photon, and demonstrate the existence of a weak reaction pathway involving the formation of short-lived transient species resembling iso-CH 2 I 2 -like geometries with a slightly shorter I–I separation compared to the ground-state CH 2 I 2 . These transient molecular configurations, which can be separated from the other channels by applying a set of conditions on the correlated momenta of three ionic fragments, are formed within ∼100 fs after the initial photoexcitation and decay within the next 100 fs.

Atomic and molecular processes↗
DOE OSTI2022

UV-induced dissociation of CH 2 BrI probed by intense femtosecond XUV pulses

The ultraviolet (UV)-induced dissociation and photofragmentation of gas-phase CH 2 BrI molecules induced by intense femtosecond extreme ultraviolet (XUV) pulses at three different photon energies are studied by multi-mass ion imaging. Using a UV-pump–XUV-probe scheme, charge transfer between highly charged iodine ions and neutral CH 2 Br radicals produced by C–I bond cleavage is investigated. In earlier charge-transfer studies, the center of mass of the molecules was located along the axis of the bond cleaved by the pump pulse. In the present case of CH 2 BrI, this is not the case, thus inducing a rotation of the fragment. We discuss the influence of the rotation on the charge transfer process using a classical over-the-barrier model. Our modeling suggests that, despite the fact that the dissociation is slower due to the rotational excitation, the critical interatomic distance for charge transfer is reached faster. Furthermore, we suggest that charge transfer during molecular fragmentation may be modulated in a complex way.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

A method to determine the electric field of liquid argon time projection chambers using a UV laser system and its application in MicroBooNE

Liquid argon time projection chambers (LArTPCs) are now a standard detector technology for making accelerator neutrino measurements, due to their high material density, precise tracking, and calorimetric capabilities. An electric field (E-field) is required in such detectors to 2020 JINST 15 P07010 drift ionization electrons to the anode where they are collected. The E-field of a TPC is often approximated to be uniform between the anode and the cathode planes. However, significant distortions can appear from effects such as mechanical deformations, electrode failures, or the accumulation of space charge generated by cosmic rays. The latter effect is particularly relevant for detectors placed near the Earth’s surface and with large drift distances and long drift time. To determine the E-field in situ, an ultraviolet (UV) laser system is installed in the MicroBooNE experiment at Fermi National Accelerator Laboratory. The purpose of this system is to provide precise measurements of the E-field, and to make it possible to correct for 3D spatial distortions due to E-field non-uniformities. Here we describe the methodology developed for deriving spatial distortions, the drift velocity and the E-field from UV-laser measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Probing large-scale UV background inhomogeneity associated with quasars using metal absorption

ABSTRACT We study large-scale UV background inhomogeneity in three-dimensions associated with the observed quasar populations at high redshift. We do this by measuring metal absorption through quasar absorption spectrum stacking as a function distance to closest quasar in SDSS-IV/eBOSS on 10 s of comoving megaparsec scales. We study both intergalactic medium absorbers and mixed circumgalactic medium absorbers and probe absorption in O vi, C iv, and Si iv, and Si iii. Overall, stronger high ionization species absorption is seen closer to quasars at 2.4 < z < 3.1. O vi absorption shows a particularly strong change, with effects in C iv evident in some cases, and more marginal effects in Si iii and Si iv. We further study 2.05 < z < 2.4 (with weak signs of increasing homogeneity with time) and explore the study of metal absorption as a function of integrated SDSS-r band flux quasar flux (yielding consistent but less significant results). While the metal absorption does show sensitivity to large-scale 3D quasar proximity, the current incomplete quasar samples limit detailed interpretation. This work does, however, demonstrate that UV background inhomogeneities exist on scales of several 10 s of comoving megaparsecs associated with quasars and that they can be measured with precision by examining metal absorption in the intergalactic medium.

79 ASTRONOMY AND ASTROPHYSICS↗