Search NASA⌕ Search

SEARCH · Search NASA

Results for “Uplink”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Diversity techniques for omnidirectional telemetry coverage of the HiMAT research vehicle

The highly maneuverable aircraft technology (HiMAT) remotely piloted research vehicle (RPRV) was flight tested and a number of technological advances applicable to future fighter aircraft were demonstrated. The aircraft control system uses airborne and ground-based computers which communicate via uplink and downlink telemetry. Antenna radiation patterns are normally much less than ideal for continuous reception or transmission for all aircraft attitudes. After flight qualification and testing on other aircraft, a frequency diversity concept and an antenna diversity concept were implemented on the HiMAT vehicle to obtain omnidirectional telemetry coverage.

Harney, P. F.↗
NASA NTRS1981

Station stability measurement

Methods and instrumentation are being developed to determine the frequency stability of Deep Space Stations. The efforts are presently focused on the verification of the stability of the X-band uplink and other RF and microwave subsystems which contribute to the overall stability of the system. The measurement methodology is presented as well as frequency stability data generated with the development measurement system. The system characteristics are highlighted and the potential areas where improvements could be made are discussed.

Sosa, E. N.↗
NASA NTRS1981

DSN command system

Modification of the currently operational DSN Command System MK 3-80 consisted of improvement of the uplink carrier frequency tuning capability to satisfy Voyager 2 requirements. Upgrading of Command System monitoring functions in the Network Operations Control Center is discussed. The DSN Command System requirements and functional design are described for the Mark 4 Network.

Thorman, H. C.↗
NASA NTRS1981

On-board processing for future satellite communications systems: Satellite-Routed FDMA

A frequency division multiple access (FDMA) 30/20 GHz satellite communications architecture without on-board baseband processing is investigated. Conceptual system designs are suggested for domestic traffic models totaling 4 Gb/s of customer premises service (CPS) traffic and 6 Gb/s of trunking traffic. Emphasis is given to the CPS portion of the system which includes thousands of earth terminals with digital traffic ranging from a single 64 kb/s voice channel to hundreds of channels of voice, data, and video with an aggregate data rate of 33 Mb/s. A unique regional design concept that effectively smooths the non-uniform traffic distribution and greatly simplifies the satellite design is employed. The satellite antenna system forms thirty-two 0.33 deg beam on both the uplinks and the downlinks in one design. In another design matched to a traffic model with more dispersed users, there are twenty-four 0.33 deg beams and twenty-one 0.7 deg beams. Detailed system design techniques show that a single satellite producing approximately 5 kW of dc power is capable of handling at least 75% of the postulated traffic. A detailed cost model of the ground segment and estimated system costs based on current information from manufacturers are presented.

Berk, G.↗
NASA NTRS1981

In situ data analysis on high altitude balloons using microprocessors

It is pointed out that systems currently in use permit an uplink data rate from scientific balloons to satellites of only 100 bit/min. On-board microprocessors, which are able to condense data, can address this problem. An experiment is described that demonstrates the capabilities of inflight data processing by an on-board computer for electric field experiments. It was possible to reduce the data rate by two orders of magnitude with no diminution of data quality.

Schroeder, K. R.↗
NASA NTRS1981

Integrated command, control, communications and computation system functional architecture

The functional architecture for an integrated command, control, communications, and computation system applicable to the command and control portion of the NASA End-to-End Data. System is described including the downlink data processing and analysis functions required to support the uplink processes. The functional architecture is composed of four elements: (1) the functional hierarchy which provides the decomposition and allocation of the command and control functions to the system elements; (2) the key system features which summarize the major system capabilities; (3) the operational activity threads which illustrate the interrelationahip between the system elements; and (4) the interfaces which illustrate those elements that originate or generate data and those elements that use the data. The interfaces also provide a description of the data and the data utilization and access techniques.

Cooley, C. G.↗
NASA NTRS1980

An interferometer-based phase control system

A system for focusing and pointing the SPS power beam is discussed. The system is ground based and closed loop. One receiving antenna is required on Earth. A conventional uplink data channel transmits an 8-bit phase error correlation back to the SPS for sequential calibration of each power module. Beam pointing resolution is better than 140 meters at the Rectenna.

Ott, J. H.↗
NASA NTRS1982

Update: Viking Lander NiCd batteries. Year six

The performance of NiCd batteries on the Viking Mars landers is discussed. During evaluation, three of the four batteries were maintained in the discharged state. Battery charge regimes and close-together, deep-discharge, reconditioning cycles to retard degradation of batteries are discussed. The effect of elevated temperatures during Martian summer on battery performance were also considered. Tabulated data for average battery capacity as a function of time are given. A design uplink to allow more frequent, greater depth of discharge reconditioning cycles was proposed.

Britting, A. O., Jr.↗
NASA NTRS1982

The implications of precise timekeeping of Doppler gravitational wave observations

Gravitational radiation from galactic and extragalactic astrophysical sources will induce spatial strains in the solar system, strains which can be measured directly by the Doppler radio link to distant spacecraft. Current noise sources in Pioneer and Voyager Doppler data are delineated and a comparison is made with expected signal levels from gravitational wave sources. The main conclusion is that it is possible to detect gravitational radiation with current DSN hydrogen maser systems stable in fractional frequency + or - 2 x 10 to the minus 14th power over 1000 sec. In the future, however, a serious Doppler observational program in gravitational wave astronomy will require frequency systems stable to at least 10 to the minus 16th power, but at the same time the current single frequency S-band uplink transmission will have to be replaced by a dual frequency capability.

Anderson, J. D.↗
NASA NTRS1980

An interferometer based phase control system

An interferometer based phase control system for focusing and pointing the solar power satellite (SPS) power beam is discussed. The system is ground based and closed loop. One receiving antenna is required on Earth. A conventional uplink data channel transmits an 8 bit phase error correction back to the SPS for sequential calibration of each power module. Beam pointing resolution is better than 140 meters at the rectenna.

Ott, J. H.↗
NASA NTRS1982

Selection of frequencies for deep-space telecommunications

The procedures used by the Jet Propulsion Laboratory to select and recommend frequencies to be used for deep space telecommunications are explained. The frequency selection process described deals only with the potential for radio frequency interference between deep space telecommunication links. Channel plans based on bandwidth, hardware implementation, and frequency ratio considered are used. The channel selection process is based on calculations and analysis of interference-to-signal power ratios as a function of time for each possible pair of missions. The modes of interference and the interference protection ratio are explained, and the interference analysis procedure described. Equations used in calculating the downlink and uplink interference analyses are presented.

Degroot, N. F.↗
NASA NTRS1981

Shuttle STS-2 mission communication systems RF coverage and performance predictions. Volume 1: Ascent

The RF communications capabilities and nominally expected performance for the ascent phase of the second orbital flight of the shuttle are provided. Predicted performance is given mainly in the form of plots of signal strength versus elapsed mission time for the STDN (downlink) and shuttle orbiter (uplink) receivers for the S-band PM and FM, and UHF systems. Performance of the NAV and landing RF systems is treated for RTLS abort, since in this case the spacecraft will loop around and return to the launch site. NAV and landing RF systems include TACAN, MSBLS, and C-band altimeter. Signal strength plots were produced by a computer program which combines the spacecraft trajectory, antenna patterns, transmit and receive performance characteristics, and system mathematical models. When available, measured spacecraft parameters were used in the predictions; otherwise, specified values were used. Specified ground station parameter values were also used. Thresholds and other criteria on the graphs are explained.

Porter, J. A.↗
NASA NTRS1981

HiMAT onboard flight computer system architecture and qualification

Two highly maneuverable aircraft technology (HiMAT) remotely piloted research vehicles (RPRV's) are being flight tested at NASA Dryden Flight Research Center, Edwards, California, to demonstrate and evaluate a number of technological advances applicable to future fighter aircraft. Closed-loop primary flight control is performed from a ground-based cockpit utilizing a digital computer and up/down telemetry links. A backup flight control system for emergency operation resides in one of two onboard computers. Other functions of the onboard computer system are uplink processing, downlink processing, engine control, failure detection, and redundancy management. This paper describes the architecture, functions, and flight qualification of the HiMAT onboard flight computer systems.

Myers, A. F.↗
NASA NTRS1981

Space tracking and data systems; Proceedings of the Symposium, Arlington, VA, June 16-18, 1981

The AIAA/NASA Symposium on Space Tracking and Data Systems, held in Pentagon City, Virginia, on June 16-18, 1981, had the purpose of reviewing international activities in space tracking and data systems for civil use in the 1980-2000 time frame. Participants included 225 representatives from industrial and government organizations in eight nations. The nations represented include the United States, France, Germany, India, Japan, Norway, Spain, and Sweden. The major functions of the systems described at the Symposium are related to the initial downlink of telemetry and spacecraft status data, attendant tracking activities, and uplink of spacecraft commands; communication between the associated acquisition sites and central processing and control stations; formulation and implementation of commands that control the spacecraft and its payload; and processing of spacecraft data needed to make command decisions. Attention is given to an overview of current activities and plans, and supporting developments, taking into account the time from 1980 to 1990. New developments are also considered.

Grey, J.↗
NASA NTRS1982

Starprobe - Coronal plasma turbulence effects on tracking and telemetry

The telemetry and tracking problems expected for Starprobe, a solar flyby with a perihelion of 4 solar radii, are discussed. The Starprobe is intended to obtain measurements of the solar quadrupole moment within an accuracy of 1/100,000,000, allowing more accurate modelling of the solar interior. Obstacles are perceived for Doppler velocity measurements due to RF signal amplitude and phase scintillations created by the solar corona. Model calculations are presented for the propagation effects in the maximum disturbance area, and an open loop two-way Doppler system is described. The system comprises X-band and S-band uplinks and downlinks to eliminate the plasma-induced phase scintillations, means of correcting unfolding errors caused by S-band amplitude scintillations, and a new method of estimating the Doppler frequency.

Armstrong, J. W.↗
NASA NTRS1982

Dynamic switch matrix for the TDMA satellite switching system

Future high capacity satellite communication systems require signal processing on board satellites. The on-board signal processing includes switching of RF signals between multiple antennas to provide interconnection between the uplink and downlink beams. This paper describes the development of a dynamic switch matrix for a TDMA satellite switching system to be used in the next generation communications satellites. In this paper, a dynamic switch matrix, which includes the microwave switch matrix, the distribution control unit and the timing source, will be described. Several different microwave switch matrix architectures and switching devices were evaluated and compared. A unique coupler crossbar switch matrix architecture with dual-gate field effect transistor as switching element was developed. Experimental results of both microwave switch matrix (MSM) and distribution control unit (DCU) are presented. These test results verify the MSM with coupler crossbar architecture and dual-gate FET as switching element will meet the future SS-TDMA system requirements. Finally, the reliability of the dynamic switch matrix is addressed. The analysis shows reliability of 0.9981 for 7 year space operation can be achieved for the designed dynamic switch matrix.

Ho, P. T.↗
NASA NTRS1980

Analytical simulation of nonlinear satellite links

It is noted that performance predictions for nonlinear digital satellite channels are usually obtained by either purely analytical methods or Monte Carlo simulations. When used with other than very simple channel models, however, they become extremely costly. It is shown that, through analytical modeling of the effect of the nonlinearity on the uplink waveform, it is possible to obtain approximate performance predictions with a minimum of computer time. It is also demonstrated that the results agree quite well with Monte Carlo simulations and that significant trade-offs can be performed with this tool. An analytical simulation based on Blachman's (1968) definition of signal x signal, signal x noise, and noise x noise terms is shown to provide the required flexibility for modeling the effect of signal distortions on the link performance and to produce good results over a wide range of nonlinearities and channel conditions.

Braun, W. R.↗
NASA NTRS1984

Stripline Antenna Beam-Forming Network

Stripline antenna beam-forming network includes 87 beam ports and 136 feed-element ports and contained on only two microstrip boards. Both uplink and downlink strips supported on same boards. Originally used for communications coverage of continental United States for Land Mobile Satellite System, structure of interest to antenna designers in other applications.

Cramer, P. W.↗