Search NASA⌕ Search

SEARCH · Search NASA

Results for “VECTOR DOMINANCE MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Investigation of the Effects of Hydrogen Atoms Concentration on the Tungsten Sigma 5 (310) Symmetric Tilt Grain Boundary Strength

Recently, strict policies are being made by several government agencies, environmentalists, and some people against the usage of fossil fuels as the source of energy generation. Not only because its supply does not meet the booming human population all around the world but also it is not pollution-free; just to mention a few. These setbacks attached to fossil fuels make nuclear fusion energy an important means of energy generation; it is characterized with clean and easy means of energy generation compared to other methods of power production such as hydropower and solar power. The success of fusion power depends on the design of modern fusion materials and the selection of the plasma facing materials (PFMs). ITER and Demonstration Power plant (DEMO) considered Tungsten (W) as part of their PFMs. W is the most preferred plasma facing material (PFM) for the future nuclear fusion reactors such as in the proposed DEMO and ITER- which is at the moment the largest Tokamak nuclear fusion reactor under construction in the world. Tungsten has excellent thermal properties, low-sputtering yield, and high melting point. Hydrogen (H) atoms have an affinity for tungsten grain boundary, and are trapped there permanently. In addition, it makes W prone to failure. In a fusion environment, W is exposed to extremely high fluences of H isotopes and irradiation. The low-energy H isotopes will be retained in the tungsten material leading to the formation of blisters in W and cause degradation of the mechanical and thermal properties of W. For safety reason, the effect of hydrogen atoms concentration at the tungsten S5 (310) grain boundary (GB) needs to be investigated and it will aid in better designing of fusion wall materials. Σ5 (310) is considered in this work because it is one of the most important and dominant GBs in the atomic distribution of materials. GBs affect the strength of W as well. The GBs with superior properties can be increased in the atomic distribution of W relative to others in order to achieve high overall material properties. GBs play a role in determining the properties of materials such as the thermal and electrical conductivity of a material. The crystallography description of the Σ5 (310) grain boundary comprises of Σ, tilt type- symmetric, crystallographic direction [001] and the GB plane. The Σ is related to the coincidence site lattice (CSL) model, which denotes that in a certain orientation between two grains, there are numbers of points where the atoms coincide. For the case of Σ5 (310), the misorientation between the two crystals is 36.9 degree along [001] direction and the GB plane is (310). GB properties differ as result of different sigma values and Σ is the reciprocal of CSL. Thus, Σ5 GB has 1/5 of the atoms in coincident sites. For the case of a tilt boundary, the lattice vector is embedded in the GB plane. Also for a tilt-symmetric GB, the grains directions are mirrored against the GB plane. The classic molecular dynamics method (MD) is an accurate numerical approach that adopts Newton's equation of motion to get atoms trajectories.Studies have been carried out on atomistic simulation of tungsten.The effect of H on GB migration in W was studied by using molecular dynamics simulation and it was discovered that H prevents the GB migration at different H concentrations and temperatures. Others investigated the migration, dissolution and trapping of H in W using MD and first principles method. Atomistic simulations have been used to predict the GB energy in Fe and Mo using embedded atom method (EAM) and it was concluded that the GB energies in the metals are affected more by the orientation of the GB plane than by the misorientation of the lattice. Study was done on symmetric and asymmetric tilt grain boundaries in Cu and Al using MD method and the GB structures and energies were established; EAM was adopted as well. The formation of hydrogen blisters and cracking processes for various tungsten materials were investigated and it was observed that, dopants increase the number of blisters and exfoliations for both stress relieved and recrystallized W. Investigation was carried out on the surface morphology changes in W caused by plasmas heat and particle loadings and their effects on material degradation in ITER. In addition, the study of interactions between low energetic hydrogen and tungsten surface was carried out using molecular dynamics simulations with analytical bond order potential (ABOP) and the results addressed irradiation damage in tungsten. Mechanism of blister formation on W surface was studied using experimental approach and it was observed that the amount of blisters formed depends on the beam fluence. This work investigates the effect of hydrogen atom concentrations at the W Σ5 (310) tilt-symmetric GB on the grain boundary energy and the GB pulling force. (authors)

36 MATERIALS SCIENCE↗

Dark Energy Survey Year 3 results: Constraints on extensions to Λ CDM with weak lensing and galaxy clustering

We constrain six possible extensions to the Λ cold dark matter (CDM) model using measurements from the Dark Energy Survey’s first three years of observations, alone and in combination with external cosmological probes. The DES data are the two-point correlation functions of weak gravitational lensing, galaxy clustering, and their cross-correlation. We use simulated data vectors and blind analyses of real data to validate the robustness of our results to astrophysical and modeling systematic errors. In many cases, constraining power is limited by the absence of theoretical predictions beyond the linear regime that are reliable at our required precision. The Λ CDM extensions are dark energy with a time-dependent equation of state, nonzero spatial curvature, additional relativistic degrees of freedom, sterile neutrinos with eV-scale mass, modifications of gravitational physics, and a binned σ 8 ( z ) model which serves as a phenomenological probe of structure growth. For the time-varying dark energy equation of state evaluated at the pivot redshift we find ( w p , w a ) = ( - 0.9 9 - 0.17 + 0.28 , - 0.9 ± 1.2 ) at 68% confidence with z p = 0.24 from the DES measurements alone, and ( w p , w a ) = ( - 1.0 3 - 0.03 + 0.04 , - 0. 4 - 0.3 + 0.4 ) with z p = 0.21 for the combination of all data considered. Curvature constraints of Ω k = 0.0009 ± 0.0017 and effective relativistic species N eff = 3.1 0 - 0.16 + 0.15 are dominated by external data, though adding DES information to external low-redshift probes tightens the Ω k constraints that can be made without cosmic microwave background observables by 20%. For massive sterile neutrinos, DES combined with external data improves the upper bound on the mass m eff by a factor of 3 compared to previous analyses, giving 95% limits of ( Δ N eff , m eff ) ≤ ( 0.28 , 0.20 eV ) when using priors matching a comparable Planck analysis. For modified gravity, we constrain changes to the lensing and Poisson equations controlled by functions Σ ( k , z ) = Σ 0 Ω Λ ( z ) / Ω Λ , 0 and μ ( k , z ) = μ 0 Ω Λ ( z ) / Ω Λ , 0 , respectively, to Σ 0 = 0. 6 - 0.5 + 0.4 from DES alone and ( Σ 0 , μ 0 ) = ( 0.04 ± 0.05 , 0.0 8 - 0.19 + 0.21 ) for the combination of all data, both at 68% confidence. Overall, we find no significant evidence for physics beyond Λ CDM .

79 ASTRONOMY AND ASTROPHYSICS↗

Select Advances in Computational Accelerator Physics

Computational accelerator physics has changed and broadened over the last decade or so. Part of the change is due to the advent of multiple ways of parallel computing. Another part comes from algorithmic developments. The multiple ways of parallel computing include distributed memory parallelism and on-chip parallelism, with the latter coming from architectures (CPU and GPU) having multiple processing elements (cores or streaming multiprocessors) and wide vector (SIMD) instruction units. The basics of these new architectures and their application to computational accelerator physics are briefly reviewed. Algorithmic advances in the select areas of spin tracking, cavity calculations, plasma acceleration, and electron cooling are also reviewed. In some cases the algorithms provide increased fidelity improving the overall accuracy, while in other cases, such as controlled dispersion, the algorithms provide increased fidelity by better modeling the essential physical interaction. Finally, the use of computational frameworks, which provide the basic computational infrastructure, while allowing the capability developer to concentrate on the math and physics, is reviewed in the context of the Vorpal application, which has found use across accelerator physics and many other fields.

Engineering↗

The primordial curvature perturbation from vector fields of general non-Abelian groups

We consider the generation of primordial curvature perturbation by general non-Abelian vector fields without committing to a particular group. Self-interactions of non-Abelian fields make the field perturbation non-Gaussian. We calculate the bispectrum of the field perturbation using the in-in formalism at tree level. The bispectrum is dominated by the classical evolution of fields outside the horizon. In view of this we show that the dominant contribution can be obtained from the homogeneous classical equation of motion. Then we calculate the power spectrum of the curvature perturbation. The anisotropy in spectrum is suppressed by the number of fields. This makes it possible for vector fields to be responsible for the total curvature perturbation in the Universe without violating observational bounds on statistical anisotropy. The bispectrum of the curvature perturbation is also anisotropic. Finally we give an example of the end-of-inflation scenario in which the curvature perturbation is generated by vector gauge fields through varying gauge coupling constant(s), which in covariant derivatives couples the Higgs field to the vector fields. We find that reasonably large gauge groups may result in the observable anisotropy in the power spectrum of the curvature perturbation.

79 ASTRONOMY AND ASTROPHYSICS↗

Quasinormal modes of black holes in anti-de Sitter space: A numerical study of the eikonal limit

Using series solutions and time-domain evolutions, we probe the eikonal limit of the gravitational and scalar-field quasinormal modes of large black holes and black branes in anti-de Sitter backgrounds. These results are particularly relevant for the AdS/CFT correspondence, since the eikonal regime is characterized by the existence of long-lived modes which (presumably) dominate the decay time scale of the perturbations. We confirm all the main qualitative features of these slowly damped modes as predicted by Festuccia and Liu [G. Festuccia and H. Liu, arXiv:0811.1033.] for the scalar-field (tensor-type gravitational) fluctuations. However, quantitatively we find dimensional-dependent correction factors. We also investigate the dependence of the quasinormal mode frequencies on the horizon radius of the black hole (brane) and the angular momentum (wave number) of vector- and scalar-type gravitational perturbations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Actuator placement for active sound and vibration control of cylinders

Active structural acoustic control is a method in which the control inputs (used to reduce interior noise) are applied directly to a vibrating structural acoustic system. The control concept modeled in this work is the application of in-plane force inputs to piezoceramic patches bonded to the wall of a vibrating cylinder. The cylinder is excited by an exterior noise source -- an acoustic monopole -- located near the outside of the cylinder wall. The goal is to determine the force inputs and sites for the piezoelectric actuators so that (1) the interior noise is effectively damped; (2) the level of vibration of the cylinder shell is not increased; and (3) the power requirements needed to drive the actuators are not excessive. We studied external monopole excitations at two frequencies. A cylinder resonance of 100 Hz, where the interior acoustic field is driven in multiple, off-resonance cylinder cavity modes, and a cylinder resonance of 200 Hz are characterized by both near and off-resonance cylinder vibration modes which couple effectively with a single, dominant, low-order acoustic cavity mode at resonance. Previous work has focused almost exclusively on meeting objective (1) and solving a complex least-squares problem to arrive at an optimal force vector for a given set of actuator sites. In addition, it has been noted that when the cavity mode couples with cylinder vibration modes (our 200 Hz case) control spillover may occur in higher order cylinder shell vibrational modes. How to determine the best set of actuator sites to meet objectives (1)-(3) is the main contribution of our research effort. The selection of the best set of actuator sites from a set of potential sites is done via two metaheuristics -- simulated annealing and tabu search. Each of these metaheuristics partitions the set of potential actuator sites into two disjoint sets: those that are selected to control the noise (on) and those that are not (off). Next, each metaheuristic attempts to improve this initial solution by calculating the change in the objective value when one selected actuator site is turned off and one actuator site that previously was not selected is turned on. All such pairwise exchanges are performed and the exchange that improves the objective the most is made. Eventually the search is unable to improve the objective value and a local optimum (with respect to pairwise exchanges) is reached. Both simulated annealing and tabu search provide mechanisms to escape local optima and allow the search to continue until (hopefully) a global optimum is found. Our experiments with the 100 Hz and 200 Hz cases confirm that both metaheuristics are able to uncover better solutions than those selected based upon engineering judgement alone. In addition, the high quality solutions generated by these metaheuristics, when minimizing interior noise, do not further excite the cylinder shell. Thus, we are able to meet objective (2) without imposing an additional constraint or forming a multiobjective performance measure. An additional observation is that in many cases the amplitude and phase values for several chosen actuator sites were nearly identical. This natural grouping means that fewer control channels are needed and the resulting control system is simpler. Currently no power requirements have been set, so objective (3) cannot be addressed. A set of experiments is planned with a laboratory test article (a cylinder). For these experiments the transfer matrices will be generated experimentally. It is hoped that the predicted performance of the best actuator sites found by our metaheuristics will correlate well with the measured performance.

Kincaid, Rex K.↗

Looking at the Gregory-Laflamme instability through quasinormal modes

We study evolution of gravitational perturbations of black strings. It is well known that for all wave numbers less than some threshold value, the black string is unstable against the scalar type of gravitational perturbations, which is named the Gregory-Laflamme instability. Using numerical methods, we find the quasinormal modes and time-domain profiles of the black string perturbations in the stable sector and also show the appearance of the Gregory-Laflamme instability in the time domain. The dependence of the black string quasinormal spectrum and late-time tails on such parameters as the wave vector and the number of extra dimensions is discussed. There is numerical evidence that at the threshold point of instability, the static solution of the wave equation is dominant. For wave numbers slightly larger than the threshold value, in the region of stability, we see tiny oscillations with very small damping rate. While, for wave numbers slightly smaller than the threshold value, in the region of the Gregory-Laflamme instability, we observe tiny oscillations with very small growth rate. We also find the level crossing of imaginary part of quasinormal modes between the fundamental mode and the first overtone mode, which accounts for the peculiar time domain profiles.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Gifts from anomalies: Exact results for Landau phase transitions in metals

Non-Fermi liquid phenomena arise naturally near critical points of Landau ordering transitions in metallic systems, where strong fluctuations of a bosonic order parameter destroy coherent quasiparticles. Despite progress in developing controlled perturbative techniques, much of the low energy physics of such metallic quantum critical points remains poorly understood. We demonstrate that exact, non-perburbative results can be obtained for both optical transport and static susceptibilities in “Hertz-Millis” theories of Fermi surfaces coupled to critical bosons. Such models possess a large emergent symmetry and anomaly structure, which we leverage to fix these quantities. In particular, we show that in the infrared limit, the boson self energy at zero wave vector, \mathbf{q}=0 𝐪 = 0 , is a constant independent of frequency, and the real part of the optical conductivity, \sigma(\omega) σ ( ω ) , is purely a delta function Drude peak with no other corrections. Therefore, further frequency dependence in the boson self energy or optical conductivity can only come from irrelevant operators in a clean system. Exact relations between Fermi liquid parameters as the critical point is approached from the disordered phase are also obtained. The absence of a universal, power law frequency dependence in the boson self energy contrasts with previous perturbative calculations, and we explain the origin of this difference.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Three-Dimensional Analysis and Modeling of a Wankel Engine

A new computer code, AGNI-3D, has been developed for the modeling of combustion, spray, and flow properties in a stratified-charge rotary engine (SCRE). The mathematical and numerical details of the new code are described by the first author in a separate NASA publication. The solution procedure is based on an Eulerian-Lagrangian approach where the unsteady, three-dimensional Navier-Stokes equations for a perfect gas-mixture with variable properties are solved in generalized, Eulerian coordinates on a moving grid by making use of an implicit finite-volume, Steger-Warming flux vector splitting scheme. The liquid-phase equations are solved in Lagrangian coordinates. The engine configuration studied was similar to existing rotary engine flow-visualization and hot-firing test rigs. The results of limited test cases indicate a good degree of qualitative agreement between the predicted and measured pressures. It is conjectured that the impulsive nature of the torque generated by the observed pressure nonuniformity may be one of the mechanisms responsible for the excessive wear of the timing gears observed during the early stages of the rotary combustion engine (RCE) development. It was identified that the turbulence intensities near top-dead-center were dominated by the compression process and only slightly influenced by the intake and exhaust processes. Slow mixing resulting from small turbulence intensities within the rotor pocket and also from a lack of formation of any significant recirculation regions within the rotor pocket were identified as the major factors leading to incomplete combustion. Detailed flowfield results during exhaust and intake, fuel injection, fuel vaporization, combustion, mixing and expansion processes are also presented. The numerical procedure is very efficient as it takes 7 to 10 CPU hours on a CRAY Y-MP for one entire engine cycle when the computations are performed over a 31 x16 x 20 grid.

Raju, M. S.↗

Carrier Transport and Related Effects in Detectors of the Cryogenic Dark Matter Search

The Cryogenic Dark Matter Search (CDMS) is searching for weakly-interacting massive particles (WIMPS), which could explain the dark matter problem in cosmology and particle physics. By simultaneously measuring signals from deposited charge and the energy in nonequilibrium phonons created by particle interactions in intrinsic germanium crystals at a temperature of 40 mK, a signature response for each event is produced. This response, combined with phonon pulse-shape information, allows CDMS to actively discriminate candidate WIMP interactions with nuclei from electromagnetic radioactive background which interacts with electrons. The challenges associated with these techniques are unique. Carrier scattering is dominated by the spontaneous emission of Luke-Neganov phonons due to zeropoint fluctuations of the lattice ions. Drift fields are maintained at only a few V/cm, else these emitted phonons would dominate the phonons of the original interaction. The dominant systematic issues with CDMS detectors are due to the effects of space charge accumulation. It has been an open question how space charge accrues, and by which of several potential recombination and ionization processes. In this work, we have simulated the transport of electrons and holes in germanium under CDMS conditions. We have implemented both a traditional Monte Carlo technique based on carrier energy, followed later by a novel Monte Carlo algorithm with scattering rates defined and sampled by vector momentum. This vector-based method provides for a full anisotropic simulation of carrier transport including free-fight acceleration with an anisotropic mass, and anisotropic scattering rates. With knowledge of steady state carrier dynamics as a function of applied field, the results of our Monte Carlo simulations allow us to make a wide variety of predictions for energy dependent processes for both electrons and holes. Such processes include carrier capture by charged impurities, neutral impurities, static dipoles, and capture forming "anion" (D - /A + ) states. We also generate predictions for impact ionization of shallow impurities and of impact "neutralization" of D - /A + states. We use measurements of carrier capture performed on CDMS detectors to validate a plausible model for electron and hole capture due to neutral shallow impurities and their charged D - /A + states. This model, along with carrier drift and diffusion parameters from Monte Carlo simulation, can be used as the foundation for simulations of space charge evolution in CDMS detectors, simultaneously solving continuity equations with Poisson's equation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

MAGNETIC FIELDS IN INTERSTELLAR CLOUDS FROM ZEEMAN OBSERVATIONS: INFERENCE OF TOTAL FIELD STRENGTHS BY BAYESIAN ANALYSIS

The only direct measurements of interstellar magnetic field strengths depend on the Zeeman effect, which samples the line-of-sight component B{sub z} of the magnetic vector. In this paper, we use a Bayesian approach to analyze the observed probability density function (PDF) of B{sub z} from Zeeman surveys of H I, OH, and CN spectral lines in order to infer a density-dependent stochastic model of the total field strength B in diffuse and molecular clouds. We find that at n < 300 cm{sup -3} (in the diffuse interstellar medium sampled by H I lines), B does not scale with density. This suggests that diffuse clouds are assembled by flows along magnetic field lines, which would increase the density but not the magnetic field strength. We further find strong evidence for B in molecular clouds being randomly distributed between very small values and a maximum that scales with volume density n as B {proportional_to} n {sup 0.65} for n>300 cm{sup -3}, with an uncertainty at the 50% level in the power-law exponent of about {+-}0.05. This break-point density could be interpreted as the average density at which parsec-scale clouds become self-gravitating. Both the uniform PDF of total field strengths and the scaling with density suggest that magnetic fields in molecular clouds are often too weak to dominate the star formation process. The stochasticity of the total field strength B implies that many fields are so weak that the mass/flux ratio in many clouds must be significantly supercritical. A two-thirds power law comes from isotropic contraction of gas too weakly magnetized for the magnetic field to affect the morphology of the collapse. On the other hand, our study does not rule out some clouds having strong magnetic fields with critical mass/flux ratios.

79 ASTRONOMY AND ASTROPHYSICS↗

Heavy Hadron Molecules

The open charm mesons D{sub s0}*(2317), D{sub s1}(2460) and the hidden charm meson X(3872) are discussed as hadron molecules. Using a phenomenological Lagrangian approach we consider the strong and radiative decays of the D{sub s0}*(2317) and D{sub s1}(2460) states. The X(3872) is assumed to consist dominantly of molecular hadronic components with an additional small admixture of a charmonium configuration. Observed radiative ({gamma}J/{psi} and {gamma}{psi}(2s)) and strong (J/{psi}2{pi} and J/{psi}3{pi}) decays are shown to be consistent with the molecular structure assumption of the X(3872).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

An E and B gyrokinetic simulation model for kinetic Alfvén waves in tokamak plasmas

The gyrokinetic particle simulation is a powerful tool for studies of transport, nonlinear phenomenon, and energetic particle physics in tokamak plasmas. While most gyrokinetic simulations make use of the scalar and vector potentials, a new model (GK-E&B) has been developed by using the E and B field in a general form and has been implemented in simulating kinetic Alfvén waves in uniform plasma. In our work, the Chen et al. GK-E&B model has been expressed, in general, tokamak geometry using the local orthogonal coordinates and general tokamak coordinates. Its reduction for uniform plasma is verified, and the numerical results show good agreement with the original work. The theoretical dispersion relation and numerical results in the local model in screw pinch geometry are also in excellent agreement. Numerical results show excellent performance in a realistic parameter regime of burning plasmas with high values of β/(M e k$^{2}_{⊥}$ρ$^{2}_{i}$), which is a challenge for traditional methods due to the “cancellation” problem. As one application, the GK-E&B model is implemented with kinetic electrons in the local single flux surface limit. With the matched International Tokamak Physics Activity-Toroidicity-induced Alfvén Eigenmodes parameters adopted, numerical results show the capability of the GK-E&B in treating the parallel electron Landau damping for realistic tokamak plasma parameters. As another application, the global GK-E&B model has been implemented with the dominant electron contribution in the cold electron limit. Its capability in simulating the finite E || due to the finite electron mass is demonstrated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

WEIBEL, TWO-STREAM, FILAMENTATION, OBLIQUE, BELL, BUNEMAN...WHICH ONE GROWS FASTER?

Many competing linear instabilities are likely to occur in astrophysical settings, and it is important to assess which one grows faster for a given situation. An analytical model including the main beam plasma instabilities is developed. The full three-dimensional dielectric tensor is thus explained for a cold relativistic electron beam passing through a cold plasma, accounting for a guiding magnetic field, a return electronic current, and moving protons. Considering any orientations of the wave vector allows to retrieve the most unstable mode for any parameters set. An unified description of the filamentation (Weibel), two-stream, Buneman, Bell instabilities (and more) is thus provided, allowing for the exact determination of their hierarchy in terms of the system parameters. For relevance to both real situations and PIC simulations, the electron-to-proton mass ratio is treated as a parameter, and numerical calculations are conducted with two different values, namely 1/1836 and 1/100. In the system parameter phase space, the shape of the domains governed by each kind of instability is far from being trivial. For low-density beams, the ultra-magnetized regime tends to be governed by either the two-stream or the Buneman instabilities. For beam densities equaling the plasma one, up to four kinds of modes are likely to play a role, depending of the beam Lorentz factor. In some regions of the system parameters phase space, the dominant mode may vary with the electron-to-proton mass ratio. Application is made to solar flares, intergalactic streams, and relativistic shocks physics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nucleon Mass and Charges with Lattice Quantum Chromodynamics

Neutrino oscillation experiments are designed to measure neutrino masses and mixing parameters by scattering them off nuclei such as carbon, oxygen, and argon in detectors. Predictions of neutrino-nuclei cross sections from the Standard Model are needed to extract these parameters, but their theoretical uncertainties remain large due to the complexity of nuclear and hadronic physics. This situation needs to be improved in order to satisfy the precision needs of future experiments.In this dissertation, we focus on working towards a first-principles calculation of the nucleon axial form factor with lattice quantum chromodynamics (QCD). Nucleon axial form factor, which parametrizes the weak responses of a proton or neutron, is difficult to measure experimentally, and it is a dominant uncertainty in neutrino-nuclei cross-section calculations for incoming neutrino energies at around 1 GeV. So a theoretical calculation with lattice QCD provides a non-ambiguous determination of the form factor that could help reducing the uncertainty.The notorious signal-to-noise problem renders calculations of nucleon observables computationally intensive in lattice QCD. In this work, we investigate the use of staggered fermions in nucleon calculations. Staggered fermions are the most computationally efficient fermion discretization in lattice field theory, but certain theoretical issues have so far prevented their applications to nucleon physics. As a stepping stone towards a full calculation of the nucleon axial form factor, this dissertation provides a comprehensive theoretical framework on how to calculate the nucleon mass, vector charge, and axial charge with staggered fermions, together with numerical results demonstrating the methodology. This framework can be generalized to the form factor calculation that will appear in the near future.

Lin, Yin↗

Dilepton radiation by vector mesons and off-shell partons in the hot and dense medium

According to the dynamical quasiparticle model (DQPM) - matched to reproduce lattice QCD results in thermodynamic limit, - the constituents of the strongly interacting quark-gluon plasma (sQGP) are massive and off-shell quasi-particles (quarks and gluons) with broad spectral functions. In order to address the electromagnetic radiation of the sQGP, we derive off-shell cross sections of qq-bar{yields}{gamma}*, qq-bar{yields}{gamma}*+g and qg{yields}{gamma}*q(q-barg{yields}{gamma}*q-bar) reactions taking into account the effective propagators for quarks and gluons from the DQPM. Dilepton production in In+In collisions at 158 AGeV is studied by implementing these processes into the parton-hadron-string dynamics (PHSD) transport approach. The microscopic PHSD transport approach describes the full evolution of the heavy-ion collision: from the dynamics of quasi-particles in the sQGP phase (when the local energy density is above {approx}1 GeV/fm{sup 3}) through hadronization and to the following hadron interactions and off-shell propagation after the hadronization. A comparison to the data of the NA60 Collaboration shows that the low mass dilepton spectra are well described by including a collisional broadening of vector mesons, while the spectra in the intermediate mass range are dominated by off-shell quark-antiquark annihilation, quark Bremsstrahlung and gluon-Compton scattering in the nonperturbative QGP. In particular, the observed softening of the m{sub T} spectra at intermediate masses (1 GeV {<=} M {<=} 3 GeV) is approximately reproduced.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Experimental, Theoretical, and Computational Investigation of Separated Nozzle Flows

A detailed experimental, theoretical, and computational study of separated nozzle flows has been conducted. Experimental testing was performed at the NASA Langley 16-Foot Transonic Tunnel Complex. As part of a comprehensive static performance investigation, force, moment, and pressure measurements were made and schlieren flow visualization was obtained for a sub-scale, non-axisymmetric, two-dimensional, convergent- divergent nozzle. In addition, two-dimensional numerical simulations were run using the computational fluid dynamics code PAB3D with two-equation turbulence closure and algebraic Reynolds stress modeling. For reference, experimental and computational results were compared with theoretical predictions based on one-dimensional gas dynamics and an approximate integral momentum boundary layer method. Experimental results from this study indicate that off-design overexpanded nozzle flow was dominated by shock induced boundary layer separation, which was divided into two distinct flow regimes; three- dimensional separation with partial reattachment, and fully detached two-dimensional separation. The test nozzle was observed to go through a marked transition in passing from one regime to the other. In all cases, separation provided a significant increase in static thrust efficiency compared to the ideal prediction. Results indicate that with controlled separation, the entire overexpanded range of nozzle performance would be within 10% of the peak thrust efficiency. By offering savings in weight and complexity over a conventional mechanical exhaust system, this may allow a fixed geometry nozzle to cover an entire flight envelope. The computational simulation was in excellent agreement with experimental data over most of the test range, and did a good job of modeling internal flow and thrust performance. An exception occurred at low nozzle pressure ratios, where the two-dimensional computational model was inconsistent with the three-dimensional separation observed in the experiment. In general, the computation captured the physics of the shock boundary layer interaction and shock induced boundary layer separation in the nozzle, though there were some differences in shock structure compared to experiment. Though minor, these differences could be important for studies involving flow control or thrust vectoring of separated nozzles. Combined with other observations, this indicates that more detailed, three-dimensional computational modeling needs to be conducted to more realistically simulate shock-separated nozzle flows.

Hunter, Craig A.↗

Regge phenomenology of pion photoproduction off the nucleon at forward angles

We present a Regge model for pion photoproduction which is basically free of parameters within the framework of the s-channel helicity amplitude. For completeness we take into account axial mesons a{sub 1}(1260), b{sub 1}(1235) and tensor meson a{sub 2}(1320) in addition to the primary {pi}+{rho} exchanges for charged pion photoproduction, while the axial meson h{sub 1}(1170) exchange is added to the model of {omega}+{rho}{sup 0}+b{sub 1} exchanges for the neutral case. The present model deals for the first time with the a{sub 2} and h{sub 1} Regge poles in the s-channel helicity amplitude. For model independence, we use coupling constants of all exchanged mesons determined from empirical decay widths or from the SU(3) relations together with consistency check with existing estimates that are widely accepted in other reaction processes. Based on these coupling constants the simultaneous description of four photoproduction channels is given. Within the Regge regime, s>>4M{sup 2} and -t<2 GeV{sup 2}, cross sections and spin polarization asymmetries at various photon energies are analyzed and results are obtained in better agreement with experimental data without referring to any fitting procedure. The model confirms dominance of the nucleon Born term in the sharp rise of the charged pion cross section at very forward angles, while dominance of the {omega} exchange with the nonsense wrong signature zero leads to the deep dip in the neutral pion cross section. In contrast to existing models, however, our model for the charged pion case shows quite a different production mechanism due to the crucial role of the tensor meson a{sub 2} exchange in the cross section and spin polarization asymmetries. Also the axial meson b{sub 1} exchange is found to give a sizable contribution to the photon polarization asymmetry. In the neutral case, the role of the b{sub 1} is not significant, but the isoscalar h{sub 1} exchange gives an important contribution to the dip-generating mechanism in the photon polarization, showing the isoscalar nature of the process with the {omega}. These findings demonstrate validity of the present model with the prompt use of the tensor meson a{sub 2} and axial meson h{sub 1} for a wider application.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗