Search NASA⌕ Search

SEARCH · Search NASA

Results for “VECTOR DOMINANCE MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

340 records · Page 19

DROP DURABILITY ASSESSMENT OF ELECTRONIC ASSEMBLIES UNDER OFF-AXIS LOADING WITH SKEWED FIXTURES

This thesis studies drop durability of electronic assemblies when the acceleration vector is oriented at 45° to the out-of-plane direction of the circuit card. The off-axis drop tests are accomplished with a skewed fixture and are conducted as a proxy for multiaxial drop testing. Advanced shock testing and vibration test methods have been developed over the last few decades to better represent real-world field environments during ground-based laboratory testing. However, many of these test methods require expensive and specialized equipment not available in most laboratories. An alternative approach for approximating simultaneous loading along multiple axes on conventional equipment utilizes skewed fixtures which have seen use in off-axis random vibration and drop impact testing. These methods generally rely on the conversion of a uniaxial input load from the test equipment (using a uniaxial drop tower or shaker) into a multiaxial load when resolved in the reference frame of the test article (mounted on a skewed fixture). Skewed fixture design is presented and recommendations for conducting skewed angle drop testing are introduced based on local measurements along the skewed face of the fixture to accurately monitor the impact event. Characterization tests were performed with a skewed fixture, at simultaneous acceleration loads from 500 to 3,000 g in two (in-plane and out-of-plane) directions, while meeting standard time domain tolerances. Upon experimental characterization, drop shock durability tests were conducted on a printed circuit assembly (PCA). Mean drops-to-failure were measured and quantified with Weibull statistics. Dominant solder joint failure modes were identified via failure analysis. Prior work on inclined angle impact testing is limited, and the majority of solder joint interconnect level fatigue studies are conducted considering perpendicular loading normal the circuit card. Low-cycle fatigue curves are generated based on plastic strain and plastic work density within the solder joint. A multiscale nonlinear finite element model is used to relate board-level flexure to solder joint interconnect level plastic strain. A high strain rate solder constitutive model allows for accurate modeling of solder plasticity resulting from high-impact drop shock. Fatigue parameters are computed from the Coffin-Manson relation and Palmgren-Miner damage accumulation. This work serves to apply established low-cycle fatigue methods for conventional drop shock loading (impact normal to circuit card) to non-perpendicular loading with a skewed fixture.

Hower, Jonathan [Kansas City National Security Cam↗

Lattice study of flavor SU(3) breaking in hyperon beta decay

We present a quenched lattice calculation of all six form factors: vector [f{sub 1}(q{sup 2})], weak-magnetism [f{sub 2}(q{sup 2})], induced scalar [f{sub 3}(q{sup 2})], axial-vector [g{sub 1}(q{sup 2})], weak electricity [g{sub 2}(q{sup 2})], and induce pseudoscalar [g{sub 3}(q{sup 2})] form factors, in hyperon semileptonic decay {xi}{sup 0}{yields}{sigma}{sup +}l{nu} using domain wall fermions. The q{sup 2} dependences of all form factors in the relatively low q{sup 2} region are examined in order to evaluate their values at zero momentum transfer. The {xi}{sup 0}{yields}{sigma}{sup +} transition is highly sensitive to flavor SU(3) breaking since this decay corresponds to the direct analogue of neutron beta decay under the exchange of the down quark with the strange quark. The pattern of flavor SU(3) breaking effects in the hyperon beta decay is easily exposed in a comparison to results for neutron beta decay. We measure SU(3)-breaking corrections to f{sub 1}(0), f{sub 2}(0)/f{sub 1}(0), and g{sub 1}(0)/f{sub 1}(0). A sign of the leading-order corrections, of which the size is less than a few percent, on f{sub 1}(0) is likely negative, while f{sub 2}(0)/f{sub 1}(0) and g{sub 1}(0)/f{sub 1}(0) receive positive corrections of order 16% and 5%, respectively. The observed pattern of the deviation from the values in the exact SU(3) limit does not support some of the model estimates. We show that there are nonzero second-class form factors in the {xi}{sup 0}{yields}{sigma}{sup +} decay, measuring f{sub 3}(0)/f{sub 1}(0)=0.14(9) and g{sub 2}(0)/g{sub 1}(0)=0.68(18), which are comparable to the size of first-order SU(3) breaking. It is also found that the SU(3) breaking effect on g{sub 3}(0)/g{sub 1}(0) agrees with the prediction of the generalized pion-pole dominance.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the tt production cross section in pp collisions at {radical}(s)=1.96 TeV using soft electron b-tagging

We present a measurement of the top-quark pair-production cross section in pp collisions at {radical}(s)=1.96 TeV using a data sample corresponding to 1.7 fb{sup -1} of integrated luminosity collected with the Collider Detector at Fermilab. We reconstruct tt events in the lepton+jets channel, consisting of e{nu}+jets and {mu}{nu}+jets final states. The dominant background is the production of W bosons in association with multiple jets. To suppress this background, we identify electrons from the semileptonic decay of heavy-flavor jets (''soft electron tags''). From a sample of 2196 candidate events, we obtain 120 tagged events with a background expectation of 51{+-}3 events, corresponding to a cross section of {sigma}{sub tt}=7.8{+-}2.4(stat){+-}1.6(syst){+-}0.5(lumi) pb. We assume a top-quark mass of 175 GeV/c{sup 2}. This is the first measurement of the tt cross section with soft electron tags in run II of the Tevatron.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Quantum effects on Higgs-strahlung events at linear colliders within the general two-Higgs-doublet model

The associated production of neutral Higgs bosons with the Z{sup 0} gauge boson (h{sup 0}Z{sup 0}, H{sup 0}Z{sup 0}) is investigated in the context of the future linear colliders, such as the ILC and CLIC, within the general two-Higgs-doublet model (2HDM). We compute the corresponding cross section for the processes e{sup +}e{sup -{yields}}Z{sup 0}h{sup 0}/Z{sup 0}H{sup 0} at one-loop, including the full set of corrections at O({alpha}{sub ew}{sup 3}) together with the leading O({alpha}{sub ew}{sup 4}) terms, in full consistency with the available theoretical and phenomenological constraints. We find that the wave-function corrections to the external Higgs fields are the dominant source of the quantum effects, which turn out to be large and negative (e.g., {delta}{sigma}/{sigma}{approx}-20%/-60%) in all the {radical}(s) range, and located predominantly in the region around tan{beta}{approx}1 and moderate values of the parameter {lambda}{sub 5} (being {lambda}{sub 5}<0). This behavior can be ultimately traced back to the enhancement potential of the triple Higgs-boson self-couplings, a trademark feature of the 2HDM with no counterpart in the Higgs sector of the minimal supersymmetric standard model. Even under this substantial depletion of the one-loop-corrected signal (which is also highly distinctive with respect to the SM expectation for e{sup +}e{sup -{yields}}Z{sup 0}H), the predicted Higgs-strahlung rates comfortably reach a few tens of femtobarn, which means barely {approx}10{sup 3}-10{sup 4} events per 500 fb{sup -1} of integrated luminosity. Because of their great complementarity, we argue that the combined analysis of the Higgs-strahlung events (h{sup 0}Z{sup 0}, H{sup 0}Z{sup 0}) and the previously computed one-loop Higgs-pair production processes (H{sup 0}A{sup 0}) could be instrumental to probe the structure of the Higgs sector at future linac facilities.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A Fiber-Optic Borehole Seismic Vector Sensor System for Geothermal Site Characterization and Monitoring

Seismic techniques are the dominant geophysical techniques for the characterization of subsurface structures and stratigraphy. The seismic techniques also dominate the monitoring and mapping of reservoir injection and production processes. Borehole seismology, of all the seismic techniques, despite its current shortcomings, has been shown to provide the highest resolution characterization and most precise monitoring results because it generates higher signal to noise ratio and higher frequency data than surface seismic techniques. The operational environments for borehole seismic instruments are however much more demanding than for surface seismic instruments making both the instruments and the installation much more expensive. The current state-of-the-art borehole seismic instruments have not been robust enough for long term monitoring compounding the problems with expensive instruments and installations. Furthermore, they have also not been able to record the large bandwidth data available in boreholes or having the sensitivity allowing them to record small high frequency micro seismic events with high vector fidelity. To reliably achieve high resolution characterization and long term monitoring of Enhanced Geothermal Systems (EGS) sites a new generation of borehole seismic instruments must therefore be developed and deployed. To address the critical site characterization and monitoring needs for EGS programs, US Department of Energy (DOE) funded Paulsson, Inc. in 2010 to develop a fiber optic based ultra-large bandwidth clamped borehole seismic vector array capable of deploying up to one thousand 3C sensor pods suitable for deployment into ultra-high temperature and high pressure boreholes. Tests of the fiber optic seismic vector sensors developed on the DOE funding have shown that the new borehole seismic sensor technology is capable of generating outstanding high vector fidelity data with extremely large bandwidth: 0.01 – 6,000 Hz. Field tests have shown that the system can record events at magnitudes much smaller than M-2.6 at frequencies up to 2,000 Hz. The sensors have also proved to be about 100 times more sensitive than the regular coil geophones that are used in borehole seismic systems today. The fiber optic seismic sensors have furthermore been qualified to operate at temperatures over 300°C (572°F). Simultaneously with the fiber optic based seismic 3C vector sensors we are using the lead-in fiber to acquire Distributed Acoustic Sensor (DAS) data from the surface to the bottom of the vector array. While the DAS data is of much lower quality than the vector sensor data it provides a 1 m spatial sampling of the downgoing wavefield which will be used to build the high resolution velocity model which is an essential component in high resolution imaging and monitoring.

15 GEOTHERMAL ENERGY↗

Application of a Multiscale Model of Tantalum Deformation at Megabar Pressures

A new multiscale simulation tool has been developed to model the strength of tantalum under high-pressure dynamic compression. This new model combines simulations at multiple length scales to explain macroscopic properties of materials. Previously known continuum models of material response under load have built upon a mixture of theoretical physics and experimental phenomenology. Experimental data, typically measured at static pressures, are used as a means of calibration to construct models that parameterize the material properties; e.g., yield stress, work hardening, strain-rate dependence, etc. The pressure dependence for most models enters through the shear modulus, which is used to scale the flow stress. When these models are applied to data taken far outside the calibrated regions of phase space (e.g., strain rate or pressure) they often diverge in their predicted behavior of material deformation. The new multiscale model, developed at Lawrence Livermore National Laboratory, starts with interatomic quantum mechanical potential and is based on the motion and multiplication of dislocations. The basis for the macroscale model is plastic deformation by phonon drag and thermally activated dislocation motion and strain hardening resulting from elastic interactions among dislocations. The dislocation density, {rho}, and dislocation velocity, {nu}, are connected to the plastic strain rate {var_epsilon}{sup p}, via Orowan's equation: {var_epsilon}{sup p} = {rho}b{nu}/M, where b is the Burger's vector, the shear magnitude associated with a dislocation, and M is the Taylor factor, which accounts for geometric effects in how slip systems accommodate the deformation. The evolution of the dislocation density and velocity is carried out in the continuum model by parameterized fits to smaller scale simulations, each informed by calculations on smaller length scales down to atomistic dimensions. We apply this new model for tantalum to two sets of experiments and compare the results with more traditional models. The experiments are based on the Barnes's technique in which a low density material loads against a metal surface containing a pre-imposed rippled pattern. The loaded sample is Rayleigh-Taylor unstable and the rippled amplitudes grow with time. The rate of growth differs depending on the material strength, with stronger materials growing less, even to the point of saturation. One set of experiments was conducted at the pRad facility at LANSCE at Los Alamos National Laboratory in 2007 using high-explosive (HE) driven tantalum samples. The other set of experiments was done at the Omega laser at the Laboratory for Laser Energetics at the University of Rochester, which used high-powered lasers to create plasmas to dynamically compress a rippled tantalum sample. The two techniques provide data at different pressures and strain rates: The HE technique drives the samples at around 2 x 10{sup 5} s{sup -1} strain rate and pressures near 500 kbar, while the laser technique hits strain rates around 2 x 10{sup 7} s{sup -1} and pressures close to 1.4 Mbar. The most recent laser experiments were conducted in February 2010 and they present a sample of the data in Figure 1, which shows a face-on radiograph at a time of 65 ns after the laser was turned on. From this radiograph, they measure the growth factor which is defined to be the change in amplitude of the ripples relative to their initial amplitude. Figure 2 shows the resulting growth factors along with various model fits. The error bars are typically 20-25%. Only the multiscale model predictions match the experimental measurements. The growth factors via the HE technique are determined from multiple side-on proton radiography images and thus provide a full growth curve per single experiment. A sample growth curve is shown in Figure 3, also with various model fits and error bars estimated at 25%. It should be noted that by 7.5 {micro}s the growth in this sample has exceeded the initial target thickness indicating that localizations not captured in the overall simulation have probably become dominant, i.e., the target is likely breaking up. Application of the multiscale dislocation dynamics model as implemented in the Ares hydrodynamics code shows excellent agreement with both the pRad and Omega data. They also compare the Steinberg-Lund (SL), Preston-Tonks-Wallace (PTW), and Stainberg-Guinan (SG) models with the data. The PTW and SG models provide good fits to the pRad data but over-predict the growth (underestimate the strength) on the laser platform. The SL model under-predicts the pRad data and over-predicts the Omega data. The excellent agreement of the multiscale model with the data over two orders of magnitude in strain rate and more than a factor of two in pressure lends credibility to the model. They continue to stress the model by conducting experiments at 5 Mbars and beyond at the National Ignition Facility at LLNL in the near future.

36 MATERIALS SCIENCE↗

Study of direct photon production with heavy flavor jets in $p\overline{p}$ collisions at $\sqrt{s}=1.96$ TeV with DZero detector

In hadronic collisions, photons ($\gamma$) with high energies emerge unaltered from the hard parton-parton interaction and therefore provide a clean probe of the underlying hard-scattering dynamics. Photons produced in these interactions (called direct or prompt) in association with one or more bottom ($b$)-quark jets provide an important test of perturbative Quantum Chromodynamics (QCD) predictions at large hard-scattering scales $Q$ and over a wide range of parton momentum fractions. In addition, the study of these processes also provides information about the parton density functions of $b$ quarks and gluons ($g$), which still have substantial uncertainties. In $p\bar{p}$ collisions, \gb-jet events are produced primarily through the Compton process $gb\to \gamma b$, which dominates for low and moderate photon transverse momenta ($\Ptg$), and through quark-antiquark anni hilation followed by $g \to b\bar{b}$ gluon splitting $q\bar{q}\to \gamma g \to \gamma b\bar{b}$, which dominates at high $\Ptg$. The final state with $b$-quark pair production, $p\bar{p} \rightarrow \gamma+b\bar{b}$, is mainly produced via $q\bar{q}\to \gamma b\bar{b}$ and $gg\to \gamma b\bar{b}$ scatterings. The $\gamma+2~b$-jet process is a crucial component of background in measurements of, for example, $t\bar{t} \gamma$ coupling and in some searches for new phenomena.\\ This thesis presents the first measurements of the differential cross section ${\rm d}\sigma/{\rm d}\Ptg$ for the production of an isolated photon in association with at least two $b$-quark jets. The ratio of differential production cross sections for $\gamma+2~b$-jets to $\gamma+b$-jet as a function of \ptg is also presented. The measurement of the ratio of cross sections leads to cancellation of various experimental and theoretical uncertainties, allowing a more precise comparison with the theoretical predictions. The results are based on the proton-antiproton ! collision data corresponding to an integrated luminosity of $8.7$~fb$^{-1}$ at $\sqrt{s}=$1.96~\TeV collected with the \DO detector at the Fermilab Tevatron Collider. %In this measurement, we follow an inclusive approach by allowing the final state with any additional jet(s) on top of the studied $b$-quark jets. Inclusive $\gamma+2~b$-jet production may also originate from partonic subprocesses involving parton fragmentation into a photon. However, photon isolation requirements significantly reduces the contributions from such processes. The large data sample and use of advanced photon and $b$-jet identification tools enable us to measure the $\gamma+2~b$-jet production cross section differentially as a function of $\Ptg$. This allows for probing the dynamics of the production process over a wide kinematic range not studied before in other measurements of a vector boson + $b$-jet final state. The measured cross sections and their ratios are compared to the NLO perturbative Q CD calculations as well as predictions based on the $k_{\rm T}$-factorization approach and those from the {\sc sherpa} and {\sc pythia} Monte Carlo event generators. We also measure the ratio of cross sections, $\sigma(p\bar{p}\rightarrow Z+2~b~\text{jets})$/$\sigma(p\bar{p}\rightarrow Z+\text{2~jets})$, for associated production of a $Z$ boson with at least two jets. This measurement uses data corresponding to an integrated luminosity of 9.7 fb$^{-1}$ collected by the \DO experiment. The measured integrated ratio is in agreement with predictions from NLO perturbative QCD and the Monte Carlo event generators {\sc alpgen} and {\sc pythia}. A good theoretical description of this process is essential since it forms a major background for a variety of physics processes, including standard model Higgs boson production in association with a $Z$ boson, $ZH(H\rightarrow b\bar{b})$, and searches for supersymmetric partners of the $b$ quark. These results will improve our theoretical understanding as we search for phenomena beyond the standard! model us! ing the data from similar collider experiments in the case where the final states of the interaction involved the production of vector bosons in association with two $b$-quark jets.\\ This work has been done in collaboration with \DO experiment but the analyses and results presented in this thesis are my contribution.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Isovector dipole resonances in {sup 4}He and neutrino-heating in supernova

We studied transition strengths to isovector dipole resonances (GDR-1-bar , SDR-1-bar , and SDR-2-bar ) in {sup 4}He by using the {sup 4}He({sup 7}Li,{sup 7}Begamma) reaction at 455 MeV and by comparing with shell-model calculations, in order to estimate cross sections of {sup 4}He for reactions induced by neutrinos emitting from a thermalized neutrino-sphere in the type-II supernova. Excitation of the SDR was dominant in the neutrino-heating of {sup 4}He. The {sup 4}He-excitation via neutral-current reactions of nu{sub m}u{sub ,t}au and nu-bar{sub m}u{sub ,t}au was found to be one order of magnitude stronger than that via charged-current reactions of nu{sub e} and nu-bar{sub e}. The total energy-weighted cross section <omegasigma>{sub N} for neutrino-induced neutral-current reactions on {sup 4}He was found to amount to about 1.0x10{sup -40} MeVcentre dotcm{sup 2} which is comparable to those used in the previous simulations. The neutrino-heating effect of {sup 4}He is small in the type-II supernova explosion.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Experimental and theoretical indications for an intermediate {sigma}-dressed dibaryon in the NN interaction

Numerous theoretical and experimental arguments in favor of the generation of intermediate {sigma}-dressed dibaryon in NN interaction at middle and short distances are presented. We argue that this intermediate dibaryon should be responsible for the strong middle-range attraction and the short-range repulsion in the NN interaction, and also for the short-range correlations in nuclei. The suggested mechanism for the {sigma}-dressing of the dibaryon is identical to that which explains the Roper-resonance structure, its dominant decay mode and its extraordinary low mass. It is arguing that the (partial) chiral symmetry restoration effects, common for the Roper resonance and dressed dibaryon, are responsible for strong renormalizing of their masses and widths and the observed {sigma}-meson mass and decay width as well. The new experimental data on 2{pi}-production in the scalar-isoscalar channel produced in pn- and pd-collisions and recent data on {gamma}{gamma} correlations in pC and dC scattering in the GeV region seems to corroborate the existence of the {sigma}-dressed dibaryon in two- and three-nucleon interactions. A similar transformation mechanism from the glue to the scalar field can be valid also in some J/{Psi} decays and in enormous {sigma}-meson production in central pp collisions at high energies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

φ meson production in ρ + Al, ρ + Au, d + Au , and 3 He + Au collisions at $\sqrt{s_{NN}}$ = 200 GeV

We report small nuclear collisions are mainly sensitive to cold-nuclear-matter effects; however, the collective behavior observed in these collisions shows a hint of hot-nuclear-matter effects. The identified-particle spectra, especially the φ mesons which contain strange and antistrange quarks and have a relatively small hadronic-interaction cross section, are a good tool to study these effects. The PHENIX experiment has measured φ mesons in a specific set of small collision systems p+Al, p+Au, and 3 He+Au, as well as d+Au at $\sqrt{s_{NN}}$=200 GeV. The transverse-momentum spectra and nuclear-modification factors are presented and compared to theoretical-model predictions. The comparisons with different calculations suggest that quark-gluon plasma may be formed in these small collision systems at $\sqrt{s_{NN}}$=200 GeV. However, the volume and the lifetime of the produced medium may be insufficient for observing strangeness-enhancement and jet-quenching effects. The comparison with calculations suggests that the main production mechanisms of φ mesons at midrapidity may be different in p+Al versus p/d/ 3 He+Au collisions at $\sqrt{s_{NN}}$=200 GeV. While thermal quark recombination seems to dominate in p/d/ 3 He+Au collisions, fragmentation seems to be the main production mechanism in p+Al collisions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Meson emission model of {Psi}{yields}NNm charmonium strong decays

In this paper we consider a sequential 'meson emission' mechanism for charmonium decays of the type {Psi}{yields}NNm, where {Psi} is a generic charmonium state, N is a nucleon, and m is a light meson. This decay mechanism, which may not be dominant in general, assumes that an NN pair is created during charmonium annihilation, and the light meson m is emitted from the outgoing nucleon or antinucleon line. A straightforward generalization of this model can incorporate intermediate N* resonances. We derive Dalitz plot event densities for the cases {Psi}={eta}{sub c}, J/{psi}, {chi}{sub c0}, {chi}{sub c1}, and {psi}{sup '}; and m={pi}{sup 0}, f{sub 0}, and {omega} (and implicitly, any 0{sup -+}, 0{sup ++}, or 1{sup --} final light meson). It may be possible to separate the contribution of this decay mechanism to the full decay amplitude through characteristic event densities. For the decay subset {Psi}{yields}pp{pi}{sup 0} the two model parameters are known, so we are able to predict absolute numerical partial widths for {Gamma}({Psi}{yields}pp{pi}{sup 0}). In the specific case J/{psi}{yields}pp{pi}{sup 0} the predicted partial width and M{sub p{pi}}event distribution are intriguingly close to experiment. We also consider the possibility of scalar meson and glueball searches in {Psi}{yields}ppf{sub 0}. If the meson emission contributions to {Psi}{yields}NNm decays can be isolated and quantified, they can be used to estimate meson-nucleon strong couplings (g{sub NNm}), which are typically poorly known, and are a crucial input in meson exchange models of the NN interaction. The determination of g{sub NN{pi}}from J/{psi}{yields}pp{pi}{sup 0} and the (poorly known) g{sub NN{omega}}and the anomalous 'strong magnetic' coupling {kappa}{sub NN{omega}}from J/{psi}{yields}pp{omega} are considered as examples.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Spatially resolved polarization swings in the supermassive binary black hole candidate OJ 287 with first Event Horizon Telescope observations

We present the first Event Horizon Telescope 1.3 mm observations of the supermassive binary black hole candidate OJ 287. The observations achieved an unprecedented angular resolution of 18 μas and reveal significant structural and polarization variability over just five days, marking the shortest timescale on which such changes have been directly imaged in this source. The inner jet exhibits a twisted ridgeline structure, with features displaying apparent superluminal motions up to about 22 c. The linear polarization maps reveal three main polarized features whose electric-vector position angles (EVPAs) change substantially over the time span of our observations, including a component with a radial polarization consistent with being produced by a recollimation shock. Most notably, we directly resolved two innermost jet components whose EVPAs rotate in opposite directions. The faster component, moving at 2.4 ± 0.9 μas/day (17.4 ± 6.5 c), exhibits counterclockwise EVPA swings of roughly 3.7° per day, while the slower component, with a proper motion of 1.4 ± 0.3 μas/day (10.2 ± 2.2 c), rotates clockwise at approximately 2.5° per day. Previous studies inferred helical magnetic fields in AGN jets from time-resolved or integrated polarization variability but lacked the angular resolution to directly image this effect. Our results provide spatially resolved evidence that a helical magnetic field threads the jet’s collimation and acceleration zone, ruling out models based on the superposition of unresolved components. Our analysis suggests that propagating shocks interact with a Kelvin–Helmholtz plasma instability, illuminating different phases of the helical magnetic field and producing the observed polarization spatial and temporal variability. Moreover, our model naturally accounts for the more rapid polarization rotation observed in the faster moving component. Our model predicts even more rapid swings in polarization, which could be tested with future observations featuring a more densely sampled time coverage.

OJ 287↗

The persistent shadow of the supermassive black hole of M87. II. Model comparisons and theoretical interpretations

The Event Horizon Telescope (EHT) observation of M87∗ in 2018 has revealed a ring with a diameter that is consistent with the 2017 observation. The brightest part of the ring is shifted to the southwest from the southeast. In this paper, we provide theoretical interpretations for the multi-epoch EHT observations for M87∗ by comparing a new general relativistic magnetohydrodynamics model image library with the EHT observations for M87∗ in both 2017 and 2018. The model images include aligned and tilted accretion with parameterized thermal and nonthermal synchrotron emission properties. The 2018 observation again shows that the spin vector of the M87∗ supermassive black hole is pointed away from Earth. A shift of the brightest part of the ring during the multi-epoch observations can naturally be explained by the turbulent nature of black hole accretion, which is supported by the fact that the more turbulent retrograde models can explain the multi-epoch observations better than the prograde models. The EHT data are inconsistent with the tilted models in our model image library. Assuming that the black hole spin axis and its large-scale jet direction are roughly aligned, we expect the brightest part of the ring to be most commonly observed 90 deg clockwise from the forward jet. This prediction can be statistically tested through future observations.

79 ASTRONOMY AND ASTROPHYSICS↗

pp{yields}J/{psi}+{Upsilon}+X as a clean probe to the quarkonium production mechanism

We report that, unlike most inclusive quarkonium-production processes, the production rate for pp{yields}J/{psi}+{Upsilon}+X dominantly depends on two not well-known long-distance nonrelativistic QCD matrix elements, <O{sub 8}{sup J}/{psi}(3S{sub 1})> and <O{sub 8}{sup {Upsilon}}(3S{sub 1})> at leading order in the strong coupling constant, which account for the transition probabilities of the color-octet spin-triplet heavy-quark-antiquark pairs cc{sub 8}({sup 3}S{sub 1}){yields}J/{psi} and bb{sub 8}({sup 3}S{sub 1}){yields}{Upsilon}, respectively. With the integrated luminosity {approx}100 fb{sup -1} at the center-of-momentum energy {radical}(s)=14 TeV we expect that approximately 1900 pp{yields}J/{psi}+{Upsilon}+X events can be observed at the CERN Large Hadron Collider by tagging muon pairs, which are enough to probe to the color-octet mechanism. The forthcoming measurement may provide a useful constraint to resolve the decade-old puzzle for the polarization of prompt J/{psi} at the Fermilab Tevatron. If corresponding measured rate is significantly less than the prediction, it may imply that the current values for the color-octet matrix elements are overestimated.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Hadronic charmless B decays B{yields}AP

The two-body hadronic decays of B mesons into pseudoscalar and axial-vector mesons are studied within the framework of QCD factorization. The light cone distribution amplitudes (LCDAs) for {sup 3}P{sub 1} and {sup 1}P{sub 1} axial-vector mesons have been evaluated using the QCD sum rule method. Owing to the G-parity, the chiral-even two-parton light cone distribution amplitudes of the {sup 3}P{sub 1} ({sup 1}P{sub 1}) mesons are symmetric (antisymmetric) under the exchange of quark and antiquark momentum fractions in the SU(3) limit. For chiral-odd LCDAs, it is the other way around. The main results are the following: (i) The predicted rates for a{sub 1}{sup {+-}}(1260){pi}{sup {+-}}, b{sub 1}{sup {+-}}(1235){pi}{sup {+-}}, b{sub 1}{sup 0}(1235){pi}{sup -}, a{sub 1}{sup +}K{sup -}, and b{sub 1}{sup +}K{sup -} modes are in good agreement with the data. However, the naively expected ratios B(B{sup -}{yields}a{sub 1}{sup 0}{pi}{sup -})/B(B{sup 0}{yields}a{sub 1}{sup +}{pi}{sup -}) < or approx. 1, B(B{sup -}{yields}a{sub 1}{sup -}{pi}{sup 0})/B(B{sup 0}{yields}a{sub 1}{sup -}{pi}{sup +}){approx}(1/2), and B(B{sup -}{yields}b{sub 1}{sup 0}K{sup -})/B(B{sup 0}{yields}b{sub 1}{sup +}K{sup -}){approx}(1/2) are not borne out by experiment. This should be clarified by the improved measurements of these decays. (ii) Since the B{yields}b{sub 1}K decays receive sizable annihilation contributions, their rates are sensitive to the interference between penguin and annihilation terms. The measurement of B(B{sup 0}{yields}b{sub 1}{sup +}K{sup -}) implies a destructive interference which in turn indicates that the form factors for B{yields}b{sub 1} and B{yields}a{sub 1} transitions are of opposite signs. (iii) Sizable power corrections such as weak annihilation are needed to account for the observed rates of the penguin-dominated modes K{sub 1}{sup -}(1270){pi}{sup +} and K{sub 1}{sup -}(1400){pi}{sup +}. (iv) The decays B{yields}K{sub 1}K with K{sub 1}=K{sub 1}(1270), K{sub 1}(1400) are in general quite suppressed, of order 10{sup -7}-10{sup -8}, except for B{sup 0}{yields}K{sub 1}{sup 0}(1270)K{sup 0} which can have a branching ratio of order 2.3x10{sup -6}. The decay modes K{sub 1}{sup -}K{sup +} and K{sub 1}{sup +}K{sup -} are of particular interest as they proceed only through weak annihilation. (v) The mixing-induced parameter S is predicted to be negative in the decays B{sup 0}{yields}a{sub 1}{sup {+-}}{pi}{sup {+-}}, while it is positive experimentally. This may call for a larger unitarity angle {gamma} > or approx. 80 deg. (vi) Branching ratios for the decays B{yields}f{sub 1}{pi}, f{sub 1}K, h{sub 1}{pi} and h{sub 1}K with f{sub 1}=f{sub 1}(1285), f{sub 1}(1420) and h{sub 1}=h{sub 1}(1170), h{sub 1}(1380) are generally of order 10{sup -6} except for the color-suppressed modes f{sub 1}{pi}{sup 0} and h{sub 1}{pi}{sup 0} which are suppressed by 1 to 2 orders of magnitude. Measurements of the ratios B(B{sup -}{yields}h{sub 1}(1380){pi}{sup -})/B(B{sup -}{yields}h{sub 1}(1170){pi}{sup -}) and B(B{yields}f{sub 1}(1420)K)/B(B{yields}f{sub 1}(1285)K) will help determine the mixing angles {theta}{sub {sup 1}P{sub 1}} and {theta}{sub {sup 3}P{sub 1}}, respectively.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗